My phone can only charge but not be recognized on USB, when I plug it into my computer it says it's unrecognizable from my computer (like an error pops up). It wasn't like this before I installed the new update to the cygeonmod rom. I tried going back to stock gingerbread, other roms. Like at least 4 roms i've tried I just don't know what to do now. Any Ideas?
Are you trying to access the storage or use development tools (like adb) via USB?
Also, have you tried with a different USB port (preferably one on the motherboard of your computer)?
WindSlash said:
Are you trying to access the storage or use development tools (like adb) via USB?
Also, have you tried with a different USB port (preferably one on the motherboard of your computer)?
Click to expand...
Click to collapse
I'm just trying to access the storage, I've tried different usb ports but it just keeps saying USB Device Not Recognized.
I'm assuming you're using Windows... can you go under Device Manager and see if there is one with an exclamation mark (!) when your device is plugged in?
WindSlash said:
I'm assuming you're using Windows... can you go under Device Manager and see if there is one with an exclamation mark (!) when your device is plugged in?
Click to expand...
Click to collapse
yes theres and exclamation mark when I plug it in and it says (!) Unknown Device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone got any solutions?
tdog1o1 said:
My phone can only charge but not be recognized on USB, when I plug it into my computer it says it's unrecognizable from my computer (like an error pops up). It wasn't like this before I installed the new update to the cygeonmod rom. I tried going back to stock gingerbread, other roms. Like at least 4 roms i've tried I just don't know what to do now. Any Ideas?
Click to expand...
Click to collapse
Had the same problem and it ended up being a faulty USB cable. Pretty unlikely, but try a different cable and see if that helps.
XK72 said:
Had the same problem and it ended up being a faulty USB cable. Pretty unlikely, but try a different cable and see if that helps.
Click to expand...
Click to collapse
I've tried different usb cables with different computers and with different usb slots in each computer. Nothing works. Is it possible that my nexus s is missing a file allowing me to connect usb to my computer? Because every computer I use it says USB DEVICE NOT RECOGNIZED so I was just wondering if that's the case.
tdog1o1 said:
I've tried different usb cables with different computers and with different usb slots in each computer. Nothing works. Is it possible that my nexus s is missing a file allowing me to connect usb to my computer? Because every computer I use it says USB DEVICE NOT RECOGNIZED so I was just wondering if that's the case.
Click to expand...
Click to collapse
It sounds like your problem can be isolated to the phone, but I'm not familiar with working in a Windows environment. I'd try booting into (the phone's) Recovery and seeing if you can mount the drive from there. Might help you isolate whether or not your issue is related to a particular volume.
XK72 said:
It sounds like your problem can be isolated to the phone, but I'm not familiar with working in a Windows environment. I'd try booting into (the phone's) Recovery and seeing if you can mount the drive from there. Might help you isolate whether or not your issue is related to a particular volume.
Click to expand...
Click to collapse
I tried that going into the phone's recovery mode and plugging in the usb cord and it still says the same thing. When I go into further like clicking the message it gives me a Code 43 warning on my computer. I also tried hard factory resetting my phone when I was on the phone with Samsung and that didn't work either. Everything was fine before I flashed Cygenmod rom on my phone everything was perfect.
tdog1o1 said:
I tried that going into the phone's recovery mode and plugging in the usb cord and it still says the same thing. When I go into further like clicking the message it gives me a Code 43 warning on my computer. I also tried hard factory resetting my phone when I was on the phone with Samsung and that didn't work either. Everything was fine before I flashed Cygenmod rom on my phone everything was perfect.
Click to expand...
Click to collapse
Have you installed the drivers from http://developer.android.com/sdk/win-usb.html?
XK72 said:
Have you installed the drivers from http://developer.android.com/sdk/win-usb.html?
Click to expand...
Click to collapse
I tried it and nothing is working.
Can you go back to Device Manager?
Double click on the "Unknown Device", then click on "Details" tab, under "Property", select "Hardware Ids", and take a screenshot of what's there?
WindSlash said:
Can you go back to Device Manager?
Double click on the "Unknown Device", then click on "Details" tab, under "Property", select "Hardware Ids", and take a screenshot of what's there?
Click to expand...
Click to collapse
Here you go.
Interesting... now let me ask you from another angle, with the phone connected and USB debugging on, are you able to access the phone using adb devices / fastboot?
download and install PDANet
worked like a charm for me, installed my usb drivers to my phone which i had problems with just like you.
WindSlash said:
Interesting... now let me ask you from another angle, with the phone connected and USB debugging on, are you able to access the phone using adb devices / fastboot?
Click to expand...
Click to collapse
No i'm not able to access it with fastboot or adb devices. All it says is USB device not recognized.
Nexus S Woes
I had the exact same story and errors as tdog1o1, and the ONLY fix I found useful was on an mp3 forum.
" I had code 43 problems with my usb ports until I found a thread on MSI's website. My front panel usb ports connected to a 9 pin usb header on the motherboard. Only 8 pins are needed. If pin 9 has a black ground wire then remove it. I didnt give this fix much hope but it fixed my problems! "
After many hours of driver installs, front usb port changes, and a dozen reboots, this actually worked!
I merely used the USB at the back of the computer and Voila!
Looks Wind Slash nailed it at the beginning of this thread.
Nexus S
I am having the exact problem, have found a solution.
Related
Hi!
I disconnected by accidently the USB cable while the phone was at the ClockWorkMod Recovery v5.0.2.0/-mounts and storage/-mount USB storage.
Now the problem is he does not want to connect the USB or even the ADB. When I connect to the PC via USB cable the only indicate that the battery is charging. I connected it ( to see if it works) at on the laptop with win7 sp1 with full update and with internet active , but Nexus S is still the same (no way for connecting usb or adb). The big problem now is that the Windows no longer sees it.
I can manage /sdcard with Root_explorer , but I cant mount it even Auto Mount. I can install any rom from my /sdcard( that it's work) . Waiting for your answer ( I still have CWM Recovery 5.0.2.0- I have not tried android 2.3.3 stock version for fear of running out clokworkmod recovery ). Thank's in advanced....
perhaps cable damage?
Nexus S's USB slot is Micro USB , it's easy to buy one cable of this port
and did you see this(red line) in your computer ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what does it appear when you connect to computer in hardware manager ?
did you set "debugging mode" ?
actually i have experienced this very same problem on other device , it can recharge via USB but no mount disk , and problem was solved after i brought a new cable ...
1 what does it appear when you connect to computer in hardware manager ?
2 did you set "debugging mode" ?
3 actually i have experienced this very same problem on other device , it can recharge via USB but no mount disk , and problem was solved after i brought a new cable ..
1 Nothing.....
2 Yes ( I have no change in the settings ..before it was wark well)
3 what cable ? I tried 3 diferent cable usb and no change ( including usb cable on Samsung Galaxy S II).
Thank's....but nothing work for now , just recharge via USB.
Hey Surdu, I have the same problem with my Nexus S, and so does a lot of other Nexus owners. I have googled this problem many times and the only solution I have come across was somewhere on code.Google.com.
Turn of your phone, and take out the battery for a minute or two, and then put it back in and boot your phone.
For me, this problem comes again and again, and all I can do is pull the battery once more.
Hope this was of help, good luck.
Sent from my Nexus S using xda premium
maybe phone's USB port's damaged?
qtwrk said:
maybe phone's USB port's damaged?
Click to expand...
Click to collapse
Unfortunately I think you're right !
I tried almost everything but no success. Now I have installed 2.3.3 and after that I get google update to 2.3.6. ( However do not forget that the battery is charging when is connected on the PC via usb)
Turn of your phone, and take out the battery for a minute or two, and then put it back in and boot your phone.
For me, this problem comes again and again, and all I can do is pull the battery once more.
Hope this was of help, good luck.
I tried several times (I left and five minutes without battery) - no result
I tried to connected it on ubuntu 11.10, windows xp, windows 7 ( via usb cable) , but unfortunately with no result. When connecting the USB cable nothing happens with all the operating systems, only the battery is charging.
When reboot the phone I can see the icon and the message on status bar :
Preparing usb storage.....I can manage usb storage (/sdcard with Astro or Es FilesExplorer)... I have installed Auto Mount SDcard , (checking on) Enable SD card Auto-Mounting - but when I connected usb cable nothing happens --Does this mean that the externel boot partition is broken ??? I have no ideea
My nexus s had an issue where it wouldn't mount USB, turns out the little metal flap insider the port had bent slightly and used a small screwdriver to bend it back into place, works flawlessly now!
Sent from my Nexus S
Does anyone have any better idea ???
I tried almost everything....I certainly have led to service !
Format the sd card. I had this problem before and this fixed it
red_skittles said:
Format the sd card. I had this problem before and this fixed it
Click to expand...
Click to collapse
Thank you but nothing change with format sdcard.
I'm having the exact same problem.
Did you manage to solve it ?
Anyone?I also have this problem..
Sent from my Nexus S using xda premium
Hi again Surdu, I have installed Brainmasters MIUI ROM, and now USB mount works everytime. Go figure..
Sent from my Google Nexus S using xda premium
Hi!
Thanks for your advice , but now I have another big problem :http://forum.xda-developers.com/showthread.php?t=1067815
swaipa said:
Hi again Surdu, I have installed Brainmasters MIUI ROM, and now USB mount works everytime. Go figure..
Sent from my Google Nexus S using xda premium
Click to expand...
Click to collapse
Thanks...but now if you try to install another ROM , usb work well ? If it's work just in Brainmaster MIUI ROM , that is not a solution for this big problem.
Thanks anyway!
anyone who have this problem..
try this..
plug your phone to usb cable...
reboot to recovery
choose mount and storage
mount data(then you will hear sound that usb connected to your computer)
unplugged
restart your phone
wait till your phone finished loading
now right connect your phone to computer again
al_madd said:
anyone who have this problem..
try this..
plug your phone to usb cable...
reboot to recovery
choose mount and storage
mount data(then you will hear sound that usb connected to your computer)
unplugged
restart your phone
wait till your phone finished loading
now right connect your phone to computer again
Click to expand...
Click to collapse
Thanks....but when restart the phone , he enters on bootloader because I have nothing on the phone even sdcard.
I have just Bootloader and CWM 5.0.2.0 installed, ADB and Fastboot not recognize my phone and I cant mount sdcard on CWM because it's nothing heppends if I check -mount/sdcard after that -mount USB storage.
I have SDK 14 and all the driver update for Nexus S on my windows7.
( I tried all the possibilities wipe all, format all , partition SD card ...all with no result)
Thank you very much if you can help me !!!
You can see my bad story : http://forum.xda-developers.com/showthread.php?t=1067815 #8
anyone can help us??
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
willylatorre said:
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
Click to expand...
Click to collapse
Try to switch USB port in PC, reinstall your android (complete wipe of system, then reinstall it). Or maybe your windows is causing this problem.
Cable or port issue. USB port on phone, computer or cable.
Sent from my Nexus 5 using Tapatalk
Thanks, but I have already tried on multiple PCs,multiple ports and multiple cables. I don't know if it can be a sofware problem that a wipe or change of ROM can solve :/
willylatorre said:
Thanks, but I have already tried on multiple PCs,multiple ports and multiple cables. I don't know if it can be a sofware problem that a wipe or change of ROM can solve :/
Click to expand...
Click to collapse
Then perhaps USB fault on your phone.
Can't flash factory without USB
Sent from my Nexus 5 using Tapatalk
willylatorre said:
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
Click to expand...
Click to collapse
I experienced the same issue yesterday when I tried to flash Lollipop on my Nexus5.
Using the original USB cable that came with the Nexus did the trick.
Try turning USB Debugging on Dev Options. It might help.
willylatorre said:
Hi,
Three days ago, my Nexus 5 has stoped from being recognized by my computer as a device: when I plug my phone, nothing happens:
No "USB" icon/notification on my phone
No response from my PC
Enabling/disabling MTP, PTP, Debugging does not change anything
Even my
is not recognized anymore
I am an experienced user an it is not a driver's problem (I have already reinstalled drivers and changed USB cables). If it helps, I am on stock 4.4.4 rooted.
I don't know if anyone has ever had the same problem and can give a hint! Thanks a lot!
Click to expand...
Click to collapse
you're using windows?
ither one of these two will help -
PC recognizes Nexus but then I can't access my storage
but I believe this is the one you want -
Nexus 5 connecting via USB as wrong device
Good morning guys
I have a very huge problem. I tried to install CM on my Moto G (2013) with this walkthrough:
Every worked fine, till the last point. My device is not listed in adb. if I type in "adb devices" it is not listed, therefore I am not able to put CM on my internal storage
I have learnt, that I used to enable USB debug first, but I didn´t. My device is listed in the "Gerätemanager" (sorry, I forgot the english expression) Now I am stucked, either in "warning bootloader unlocked" screen or on the "Team win recovery Project mode" screen (which works fine) or on in the fastboot Flash mode
I have basically two question:
- Is it possible to enable USB debug by any other method?
- Is it possible to get CM on my phone by any other method?
What I did:
Installed Google USB Driver
Installed Moto G Software Suite
What I am using:
Windows 10
I would appreciate some help as my phone is stuck now with no OS
Best regards!
Juventino7 said:
Good morning guys
I have a very huge problem. I tried to install CM on my Moto G (2013) with this walkthrough:
Every worked fine, till the last point. My device is not listed in adb. if I type in "adb devices" it is not listed, therefore I am not able to put CM on my internal storage
I have learnt, that I used to enable USB debug first, but I didn´t. My device is listed in the "Gerätemanager" (sorry, I forgot the english expression) Now I am stucked, either in "warning bootloader unlocked" screen or on the "Team win recovery Project mode" screen (which works fine) or on in the fastboot Flash mode
I have basically two question:
- Is it possible to enable USB debug by any other method?
- Is it possible to get CM on my phone by any other method?
What I did:
Installed Google USB Driver
Installed Moto G Software Suite
What I am using:
Windows 10
I would appreciate some help as my phone is stuck now with no OS
Best regards!
Click to expand...
Click to collapse
Do you have Custom Recovery, like TWRP or ClockworkMod installed? If so, you should be able to copy the .zip of the CM build onto a MicroSD card (maybe with the help of a friend's phone if you don't have a backup phone yourself) and install it via the recovery.
Yes! I am using TWRP. The main issue I am facing is, that I can´t put the files on the internal storage. The Moto G hasn´t a Micro SD Card either.
My device is not listed in adb! If I put "adb devices" in the console there is a blank space where the model of my phone should be
Oh snap, forgot about the missing slot since my 4G has one. In that, sorry for my Bad advice. But: Google "ADB sideload twrp", maybe the web can help?
Schmuppes said:
Oh snap, forgot about the missing slot since my 4G has one. In that, sorry for my Bad advice. But: Google "ADB sideload twrp", maybe the web can help?
Click to expand...
Click to collapse
Don´t worry. I appreciate every advice. Sideload won´t work either, as I always get the error message: "device not found"
You may need to install drivers. Does Windows not see a USB device at all? TWRP supports MTP which should work out of the box on Windows 10 (at least it did when I tested it with a different device on the Win10 preview).
Other alternatives:
* Copy your ROM to the device while running Android
* Use USB OTG storage
One thing that popped into my mind: Have you installed the Android SDK before trying anything? I did that on my Win10 machine and had no problems whatsoever talking to the phone via adb / fastboot.
/edit: Just realized that you probably have adb installed if you say that it doesn't recognize your device there. Try running the command line in admin mode and temporarily disabling anti virus software?
_that said:
You may need to install drivers. Does Windows not see a USB device at all? TWRP supports MTP which should work out of the box on Windows 10 (at least it did when I tested it with a different device on the Win10 preview).
Other alternatives:
* Copy your ROM to the device while running Android
* Use USB OTG storage
Click to expand...
Click to collapse
No, with Windows is everything fine. My PC regocnizes the device.
I can´t run Android, as I already wiped everything!
What is USB OTG storage?
Schmuppes said:
One thing that popped into my mind: Have you installed the Android SDK before trying anything? I did that on my Win10 machine and had no problems whatsoever talking to the phone via adb / fastboot.
/edit: Just realized that you probably have adb installed if you say that it doesn't recognize your device there. Try running the command line in admin mode and temporarily disabling anti virus software?
Click to expand...
Click to collapse
yes
In adb my device is not listed.
If I put "adb devices" in the console there is a blank space where the model of my phone should be
You can flash a zip straight from USB otg (on the go). They sell either USB otg kits to use a regular USB or they also have USBs that act like your standard USB with a mini USB connector on one side and regular USB connector on the other. I use mine all the time.
Just insert in your phones mini USB slot on the bottom. After you have transferred your zip file to it of course, and flash from it in twrp.
n0ts0smart said:
You can flash a zip straight from USB otg (on the go). They sell either USB otg kits to use a regular USB or they also have USBs that act like your standard USB with a mini USB connector on one side and regular USB connector on the other. I use mine all the time.
Just insert in your phones mini USB slot on the bottom. After you have transferred your zip file to it of course, and flash from it in twrp.
Click to expand...
Click to collapse
So that's basically like a USB Memory Stick for the smartphone? Gotta get meself one of those then, eh?
Hi.
If you are in fastboot mode then you should type "fastboot devices" instead of "adb devices"
Adb and fastboot mode are different that's why the console doesn't recognize your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another option is boot into TWRP and connect the phone to PC and finally copy the ROM. Its easier and faster than sideload.
The moto g doesn't have a microsd card slot but it doesnt matter because TWRP makes the PC recognize the phone in MTP mode.
Hope this helps
Hi guys,
I have upgraded the Moto G3 to marshmallow and PC to Windows 10. After this upgradation Moto G3 is not detected in Windows 10. I have checked the device manager and nothing is changing in the device manager. The mobile is getting charged but no MTP connection. I have tried most of the solutions like
1. Enable usb debugging and change usb config to MTP from charging after installing the motorola drivers.
2. Tried installing the motorola device manager and did the same as above but no use.
Plz help
Does your phone have 6.0 or 6.0.1?
Mine has 6.0.1 and I use file transfer mode when connected to my PC. It is detected.
If your phone has 6.0 then upgrade to 6.0.1
tnx for replying. My phone is having 6.0.1 and I have tried changing the usb debugging settings from charging only to media transfer protocol.
Usually when phone is connected it shows the hardware changes in device manager but when I connect my phone its not showing any hardware changes.
Also when I tried connecting the same phone to linux it directly takes my phone as usb drive.
Sorry for late reply. When your phone is connected to Windows, swipe down from notification panel ( status bar ). It would be showing "USB for charging". Tap on it and press "File transfer mode". You're ready to go.
By the way did you face this problem while you had Windows 8/7?(if you upgraded for free) or did the computer come with Windows 10 itself(is it a new computer)?
---------- Post added at 05:22 PM ---------- Previous post was at 05:19 PM ----------
As you said in the question, after marshmallow update this is one change seen. It isn't directly read as USB drive.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
kishoreuk2008 said:
Hi guys,
I have upgraded the Moto G3 to marshmallow and PC to Windows 10. After this upgradation Moto G3 is not detected in Windows 10. I have checked the device manager and nothing is changing in the device manager. The mobile is getting charged but no MTP connection. I have tried most of the solutions like
1. Enable usb debugging and change usb config to MTP from charging after installing the motorola drivers.
2. Tried installing the motorola device manager and did the same as above but no use.
Plz help
Click to expand...
Click to collapse
This question
my G3 has the same problem, it won't get detected in win10.
i didn't think anyone else would experience the same.
xstormli said:
my G3 has the same problem, it won't get detected in win10.
i didn't think anyone else would experience the same.
Click to expand...
Click to collapse
Now did it get detected? Did you try?
Was it detected when the computer was on win 7/8?
sanchith.hegde said:
Now did it get detected? Did you try?
Was it detected when the computer was on win 7/8?
Click to expand...
Click to collapse
go download WinDroid Toolkit, it will help you through the undetecting thingy. Mine worked after I worked around with it for the whole afternoon.
xstormli said:
go download WinDroid Toolkit, it will help you through the undetecting thingy. Mine worked after I worked around with it for the whole afternoon.
Click to expand...
Click to collapse
What about using without WinDroid Toolkit and trying to change to File Transfer Mode?(as I told above)
sanchith.hegde said:
What about using without WinDroid Toolkit and trying to change to File Transfer Mode?(as I told above)
Click to expand...
Click to collapse
there is gotta be something missing, installing just from MOTO is not enuf. try it first and see how it goes. it is worth a try.
xstormli said:
there is gotta be something missing, installing just from MOTO is not enuf. try it first and see how it goes. it is worth a try.
Click to expand...
Click to collapse
But every time I connect the phone to my PC, I just change to File Transfer Mode and go ahead. It is detected. What happens is when it is in charging mode, phone is detected but internal storage and SD card is not shown. But after changing to file transfer mode both are shown and then I transfer required files.
Moreover nothing has to be even installed.
sanchith.hegde said:
But every time I connect the phone to my PC, I just change to File Transfer Mode and go ahead. It is detected. What happens is when it is in charging mode, phone is detected but internal storage and SD card is not shown. But after changing to file transfer mode both are shown and then I transfer required files.
Moreover nothing has to be even installed.
Click to expand...
Click to collapse
it seems there is no problem in your case, charging and MTP are two different things.
When MTP mode is on, you will have MTP and Charging working together, but
you will not have MTP while only Charging mode is enabled.
xstormli said:
it seems there is no problem in your case, charging and MTP are two different things.
When MTP mode is on, you will have MTP and Charging working together, but
you will not have MTP while only Charging mode is enabled.
Click to expand...
Click to collapse
When I connect to PC, I get this. I change to file transfer mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connection
sanchith.hegde said:
Now did it get detected? Did you try?
Was it detected when the computer was on win 7/8?
Click to expand...
Click to collapse
my moto g3 get detected alot of time in windows 10 but not able to use file transfer in windows 7-8.. only shows charging..
Hi guys
I bought a pixel 3, when connecting to a PC, an error is displayed that the usb device is not recognized, in the device manager it writes that the request for the device handle failed
Please help to solve this problem
yapi_god said:
Hi guys
I bought a pixel 3, when connecting to a PC, an error is displayed that the usb device is not recognized, in the device manager it writes that the request for the device handle failed
Please help to solve this problem
Click to expand...
Click to collapse
- Change the USB cable, and then try connecting again.
- Try turning on USB Debugging in developer options.
aiSanaul said:
- Change the USB cable, and then try connecting again.
- Try turning on USB Debugging in developer options.
Click to expand...
Click to collapse
did it all, even changed the connector, on the computers available to me also everything was
yapi_god said:
did it all, even changed the connector, on the computers available to me also everything was
Click to expand...
Click to collapse
try installing USB drivers of your phone.
to check usb port and cable try connecting a different device to your PC.
aiSanaul said:
installing USB drivers of your phone.
Click to expand...
Click to collapse
I've already done it, nothing has changed
yapi_god said:
I've already done it, nothing has changed
Click to expand...
Click to collapse
So, you are saying that USB Port and USB Cable is working well, hmm...
Now, see this video tutorial here, tell me if it worked.
aiSanaul said:
So, you are saying that USB Port and USB Cable is working well, hmm...
Now, see this video tutorial here, tell me if it worked.
Click to expand...
Click to collapse
my phone doesn't even show the selection, data transfer or anything else, just goes charging from the pc, although the cord is for data transfer
yapi_god said:
my phone doesn't even show the selection, data transfer or anything else, just goes charging from the pc, although the cord is for data transfer
Click to expand...
Click to collapse
Is there a USB Connection notification in your phone?
aiSanaul said:
Is there a USB Connection notification in your phone?
Click to expand...
Click to collapse
no, it doesn't exist
yapi_god said:
no, it doesn't exist
Click to expand...
Click to collapse
even when you connect USB Cable?
Edit: something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is the android version of your phone?
aiSanaul said:
What is the android version of your phone?
Click to expand...
Click to collapse
Android 12
yapi_god said:
Android 12
Click to expand...
Click to collapse
Your phone have root access?
Try file transfer with ADB and Fastboot.
aiSanaul said:
Your phone have root access?
Try file transfer with ADB and Fastboot.
Click to expand...
Click to collapse
no, there is no root access. and I won't be able to transfer files through adb and fastboot because it is not detected even on the system
USB Debugging enable?
if not enable it in developer options.
aiSanaul said:
USB Debugging enable?
Click to expand...
Click to collapse
it does not connect with both on and off
yapi_god said:
it does not connect with both on and off
Click to expand...
Click to collapse
Then this is the last, there maybe a problem with your phone's charging port.
You should take it to a technician, ask him to check that.
yapi_god said:
it does not connect with both on and off
Click to expand...
Click to collapse
Then this is the last, there maybe a problem with your phone's charging port.
You should take it to a technician, ask him
aiSanaul said:
maybe a problem with your phone's charging port.
Click to expand...
Click to collapse
I changed it
please help me
yapi_god said:
please help me
Click to expand...
Click to collapse
I literally tell everything I know about the issue...
also, never heard of same issue before.
I will try to find something related and will come back at ya.
also what PC you are using....