Unable to Enter Flashmode on Xperia Z5 - Xperia Z5 Q&A, Help & Troubleshooting

I have followed every tutorial I can find but am still unable to enter flash mode.
I have flashtool installed and have downloaded the drivers.. When I press volume down and plug on micro USB the phone flashes a red and green LED and then boots up normally.
Any help appreciated.

Still stuck with this problem...is it possible to uninstall the drivers and maybe reinstall them? If so, where would I find the drivers to uninstall?

Related

[Q] problema lock patern (my kid's) worng mail usb debugging off

hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.
As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?
thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).
just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit
Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.
You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.
thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure

Fastboot Mode Xperia J St26i

Hello.
I have the Xperia J St26i and I can not enter in fastboot mode.
I've done every which way, I've searched, read a lot about it and I can't.
I've tried with vol +, vol-, with USB cable connected, restart with the flashtool and nothing.
Never shows the blue light.
I've tried to install with that ' install.bat ' file ' of the CWR and I can't.
I want to do the Unlock Bootloader but I need to enter fastboot.
I can't do anything without the fastboot.
My service provider is Vodafone Portugal, I don't know if it makes any difference.
And don't forget, there is no problem when entering the flash mode, enter perfectly.
I've tried a number of the same processes with different build numbers but nothing.
Don't forget the detail of the model St26i.
Thanks for the attention
Keep pressing Vol+ and then connect the USB cable, LED will show blue and welcome, you're in fastboot mode.
fercalbla said:
Keep pressing Vol+ and then connect the USB cable, LED will show blue and welcome, you're in fastboot mode.
Click to expand...
Click to collapse
the blue light does not turn on
If i remember correctly, you need flashmood (green led) to unlock bootloader, then you can connect phone to Fastboot (blue led). Probably you have problem with drivers, you can install them from Flashtool. Or try with different cable, i can't connect my M2 with stock Sony's cable.
Good Luck
Xperia M2 D2303 on K.K. 4.4.4

bootloop, no recovery mode, can't connect to pc

Hi,
I have a sony xpera L. It is stuck in a bootloop and i dont have CWM or TWRP. My device doesn't have a recovery mode. I already tried to fix this with Odin or flashtool but my PC doesn't recognize my device. When i try to connect my device to my PC i still hear the sound that it connects. My device isrooted
any solutions?
Are you able to enter the Bootloader/Fastboot?
I am able to start my phone in fastboot, my phone will show a blue light
Arceterix said:
Hi,
I have a sony xpera L. It is stuck in a bootloop and i dont have CWM or TWRP. My device doesn't have a recovery mode. I already tried to fix this with Odin or flashtool but my PC doesn't recognize my device. When i try to connect my device to my PC i still hear the sound that it connects. My device isrooted
any solutions?
Click to expand...
Click to collapse
PC doesn't recognise - Clearly means you don't have driverw for your phone installed.. A simple google search will lead u to them..
I cant install a new driver, my pc is pretty useless now since my phone cant conect to my pc.
thanks for your quick replies sir
Maybe install Ubuntu or another Linux and try again. Had the same Problem with Win8 and HTC of a friend.
Thanks for helping, i fixed my phone by flashing the stock rom. I used Wmshua for flashing. Its easy to use.
Nice to hear that

Semc flash device problem

Guys my m2 stuck in semc flash device..
When i connect with pc..
In device manager it shows semc flash....
No flashmode and fastboot mode when i press volume down and up keys.
Flashtool doesn't detected..
Sony pc companion doesn't detected
Please help me..
I don't knw what to do!!
Connect your phone, go to device manager and uninstall the driver and disconnect your phone,
Now if you're running Windows 8+ restart your PC with driver signature enforcement disabled through advance boot, now go to C:\Flashtool\drivers and open the driver installer and install Flashmode and fastboot drivers and now connect your phone and go to device manager and install the Sony Xperia M2 driver http://developer.sonymobile.com/downloads/drivers/xperia-m2-driver/
Once that's done open your sim/microsd tray and use a pin and click on the red button inside the hole,
Now connect your phone to your PC and tell me what it says in device manager and later open PC companion and see what it detects
Help
What you said i did..
But my phone is detected as semc flash device..
Device doesn't goes to flashmode or fastboot mode...
If i connect my device in another pc which doesn't have any drivers for adb or Xperia m2.
It shows "qhusb bulk" in device manager..
I don't know what it means?
Only red light blinking
...

Stuck! Xperia Z5 E6653

Can anyone please help. im stuck in a difficult problem. I cant enter recovery, my phone just loops, and i cant connect it to my pc. Just getting USB device not recognized. The last usb device you connected to this computer malfunctioned, and windows does not recognize it. I dont know how to add a new software or restore a backup, and i got a seious battery drain issue. Hope someone can help me. Im on Slim X rom on a E6653.
Download a MM, LP or Nougat firmware.
Let the phone charge and go to flashtool
Load the firmware you downloaded check all the wipe section case and put your phone on flashmode (vol - and stick USB cable while maintaining vol -)
Let flashtool do it's work and once done it should be OK
I have tried that, but my computer cant fin my phone, so i cant use flashtool
I found out of it. Had a faulty usb cord. Im happy again.
Hehe no problem

Categories

Resources