hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.
As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?
thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).
just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit
Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.
You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.
thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure
Related
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
chinitool said:
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
Click to expand...
Click to collapse
try restoring nandroid backup from cwm if you have created one.
eddiebigmouth said:
try restoring nandroid backup from cwm if you have created one.
Click to expand...
Click to collapse
is not possible because not enter recovery mode
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
nicholas said:
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
Click to expand...
Click to collapse
in another, no. but if I made a partition and install windows 7. because when I had that the above operating Sintema and now I have windows 8.1. equally before attempting this update had istalado istalar Sony PC Companion with all drivers
is known about this? http://forum.xda-developers.com/showpost.php?p=49715447&postcount=13
Hi,
Have a TF101 tablet here stock rom, stock recovery...
However it seems the USB will not detect on a windows PC tried multiple cables multiple PC's tried from recovery nothing is detected in device manager at all. Tablet doesn't even detect that its connected to PC either.
Is there anyway to root this thing without USB??? I need to root it so I can install recovery and flash another rom.
Thanks,
Which Windows version are you running?
If you use Win 7 and prior you should be able to connect with the universal naked drivers manually installed from device manager
Win 8 and above need driver signing disabled or they wont install the driver and the PC wont see the TF
If you have already tried the above, you might need a new cable
http://forum.xda-developers.com/showthread.php?t=1688012
*Detection* said:
Which Windows version are you running?
If you use Win 7 and prior you should be able to connect with the universal naked drivers manually installed from device manager
Win 8 and above need driver signing disabled or they wont install the driver and the PC wont see the TF
If you have already tried the above, you might need a new cable
http://forum.xda-developers.com/showthread.php?t=1688012
Click to expand...
Click to collapse
Thanks. Well i tried windows 7 x64 and windows 8 x64, neither showed any device or unknown device in device manager... Tried multiple cables as wel, no dice...
Shouldn't MTP work regardless of drivers installed in windows 7/8 ?
Are you putting the TF into APX mode?
Connect TF to PC USB > Power Off TF > Hold Power & Volume Up until the PC recognises it (Only takes a couple seconds, nothing appears on the TF screen) then install drivers
You need APX mode for Easyflasher
For normal media transfer, it will still need to install at least some USB type driver, as do all USB devices to function, possibly not the APX drivers
Check in Developer Options > USB Debugging mode
Try it enabled and disabled with the TF plugged in
But really the MTP drivers are not what you need if you want to root. you need APX mode to work (As above)
*Detection* said:
Are you putting the TF into APX mode?
Connect TF to PC USB > Power Off TF > Hold Power & Volume Up until the PC recognises it (Only takes a couple seconds, nothing appears on the TF screen) then install drivers
You need APX mode for Easyflasher
For normal media transfer, it will still need to install at least some USB type driver, as do all USB devices to function, possibly not the APX drivers
Check in Developer Options > USB Debugging mode
Try it enabled and disabled with the TF plugged in
But really the MTP drivers are not what you need if you want to root. you need APX mode to work (As above)
Click to expand...
Click to collapse
Doesn't seem to do anything when I hold power vol+, the screen of the tablet (blank/off) and on the pc nothing is being detected.
I can get to the bootloader/recovery via holding power vol- though. Also tried USB debugging mode... nothing is detected whatsoever... ordering another cable on ebay will see if that works but I doubt it since it seems to be a common issue with this tablet (port not working with pc)
I edited my post
Nothing will appear on the TF screen in APX mode until data transfer begins
The cheap non genuine cables are renowned for data connection failing, genuine cables are recommended
I still have my original cable and it still works 100%
*Detection* said:
I edited my post
Nothing will appear on the TF screen in APX mode until data transfer begins
The cheap non genuine cables are renowned for data connection failing, genuine cables are recommended
I still have my original cable and it still works 100%
Click to expand...
Click to collapse
Using the original cable, I still can't tell if its in APX mode, installed all the drivers provided by asus, nothing is detected in windows device manager. I'm 100% its not being detected ie. no connection. I ran easyflasher anyway both sbk1 and sbk2 says it flashed recovery but it never did still the stock recovery is on the tablet.
Will try again once the new cable comes in, thanks.
Forget the ASUS drivers, use the Universal ones from the Easyflasher thread
Here's what will happen when its working as intended
When you plug the TF into the PC, no matter what mode it is in, the PC should sound the USB connect sound
When you power off the TF, then put it in APX mode, the PC will again sound the USB connect noise, then it will fail to install the correct drivers
That's when you open Device Manager, find the ! missing driver ! exclamation mark, and update drivers manually pointing it to the extracted Universal drivers
Once you have installed them, then Easyflasher should work as normal
So unless you actually have a hardware fault on the TF, or the USB ports of the PC, Id hedge my bets on the cable
Have you tried a different PC?
*Detection* said:
Forget the ASUS drivers, use the Universal ones from the Easyflasher thread
Here's what will happen when its working as intended
When you plug the TF into the PC, no matter what mode it is in, the PC should sound the USB connect sound
When you power off the TF, then put it in APX mode, the PC will again sound the USB connect noise, then it will fail to install the correct drivers
That's when you open Device Manager, find the ! missing driver ! exclamation mark, and update drivers manually pointing it to the extracted Universal drivers
Once you have installed them, then Easyflasher should work as normal
So unless you actually have a hardware fault on the TF, or the USB ports of the PC, Id hedge my bets on the cable
Have you tried a different PC?
Click to expand...
Click to collapse
Ok, well ya thats the thing no sound or detection of anything when plugging it in, or going into apx mode, rebooting etc...
I tried 2 cables and 2 different PCs. Will try a new cable but I betting that is won't work either... we'll see.
Thanks again
No need to bother with cables and drivers, just download Baidu Root: https://app.box.com/s/pyehf9fh4xem3hy50dot
EDIT: The app has built-in su access management, but I'd recommend installing SuperSU from the Play Store.
Duchman said:
No need to bother with cables and drivers, just download Baidu Root: https://app.box.com/s/pyehf9fh4xem3hy50dot
EDIT: The app has built-in su access management, but I'd recommend installing SuperSU from the Play Store.
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!! Worked to let me get TWRP installed and flashed a new rom with SU etc...
Thanks again!!!!!!!!!
My Z3 will not come out of airplane mode
I tried every thing including a complete reset or change rom for several time , but didn't answer...
any one can help me for solve this problem's ?
Best regards
M.Motahari
M.Motahari said:
I tried every thing including a complete reset or change rom for several time , but didn't answer...
any one can help me for solve this problem's ?
Best regards
M.Motahari
Click to expand...
Click to collapse
I'm not sure if this'll work It's probably a hardware fault otherwise,
But you're gonna' need a Windows PC
1).Download Sony PC Companion (Click Here)
2). Plug your device in with the Stock Micro USB Cable into the PC
3). Once it recognizes your device unplug your device and power it off
4). Once your device is off plug your MicroUSB Cable and instantly hold the 'Volume Down' Button (Yes it should be plugged into your PC)
5). If this was done succesfully Sony PC Companion will pick up a device and begin installing the stock firmware or something
Hello Dear
I try this , but not work and problem is still yet
you have to repair using Sony PC companion or better yet visit service center if in warranty. hope u have not unlocked bootloader.
Hello,
I've been trying to charge my phone through the USB cable that came with the device. It works with the charger, but once i plug it into my pc it doesnt work. When I open Sony PC Companion it doesnt recognize a device either. Now when I enable USB debugging, it works for 2 seconds and then it goes back to non functioning. What i mean by it works for 2 seconds is, the device gets recognized by sony pc companion but then gets unrecognized immediately, i get the charging icon for 2 seconds en the device says its connected to the pc via MTP. But then I can't do anything with it. In device manager it has 2 unrecognized devices: ADB interface and MTP.
What is wrong here?
bump
Try another cable if you have one.
Also install the drivers for your phone from this site.
http://developer.sonymobile.com/downloads/drivers/
Skickat från min E6653 via Tapatalk
J03llV said:
Hello,
I've been trying to charge my phone through the USB cable that came with the device. It works with the charger, but once i plug it into my pc it doesnt work. When I open Sony PC Companion it doesnt recognize a device either. Now when I enable USB debugging, it works for 2 seconds and then it goes back to non functioning. What i mean by it works for 2 seconds is, the device gets recognized by sony pc companion but then gets unrecognized immediately, i get the charging icon for 2 seconds en the device says its connected to the pc via MTP. But then I can't do anything with it. In device manager it has 2 unrecognized devices: ADB interface and MTP.
What is wrong here?
Click to expand...
Click to collapse
without recognizing charging function must work!
but test this >
uninstall PC companion > then go to drive C/Program Files and Files x86 and delete Sony and Sony Mobile folders (if exist)
then restart and Install it again.
If doesn't help
Read this carefully
http://www.howtogeek.com/195607/how...evice-to-show-up-in-file-explorer-if-it-isnt/
:good:
My problem is pc companion force closes when I connect my phone via USB to the pc
Turns out, the phone charges when it is shut down. When i turn it on it wont charge. But it wont be recognized by the pc still. In device manager it shows up as a portable MTP device but I cant do anything with it
Go to recovery and mount usb and system and then try
iv had the same, I cant connect to the PC, im on windows 10, i get USB device malfunctioned. Any update?
dlevick said:
iv had the same, I cant connect to the PC, im on windows 10, i get USB device malfunctioned. Any update?
Click to expand...
Click to collapse
Last week I found a solution, the universal adb driver from Google fixed my problem. The driver from Sony doesn't work, but this one does!
J03llV said:
Last week I found a solution, the universal adb driver from Google fixed my problem. The driver from Sony doesn't work, but this one does!
Click to expand...
Click to collapse
I got that fed up of issues with the z5 I got rid of it after 3 months
dlevick said:
I got that fed up of issues with the z5 I got rid of it after 3 months
Click to expand...
Click to collapse
Yeah I know, I rooted it now though and it feels like an whole other phone
Can anyone please help. im stuck in a difficult problem. I cant enter recovery, my phone just loops, and i cant connect it to my pc. Just getting USB device not recognized. The last usb device you connected to this computer malfunctioned, and windows does not recognize it. I dont know how to add a new software or restore a backup, and i got a seious battery drain issue. Hope someone can help me. Im on Slim X rom on a E6653.
Download a MM, LP or Nougat firmware.
Let the phone charge and go to flashtool
Load the firmware you downloaded check all the wipe section case and put your phone on flashmode (vol - and stick USB cable while maintaining vol -)
Let flashtool do it's work and once done it should be OK
I have tried that, but my computer cant fin my phone, so i cant use flashtool
I found out of it. Had a faulty usb cord. Im happy again.
Hehe no problem