I don't really know if this is the site to post to, but I have a weird issue with my xperia e. I tried to root the device with SRSRoot for Android, and managed to disconnect it while performing root4b. Since then pccompanion does not see the phone, I tried a 'repair' from the support center; a new firmware that was not orange branded (used a flasher); and then repaired it with pccompanion again. Nothing seems to work.
One point to note is that the charging still works.And if I connect it to my usb 3.0 I can initiate the repair that requires me to hold the volume down key...
If anyone knows what I need to repair to make it connect fully with my pc, please contact me here or at [email protected].
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
chinitool said:
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
Click to expand...
Click to collapse
try restoring nandroid backup from cwm if you have created one.
eddiebigmouth said:
try restoring nandroid backup from cwm if you have created one.
Click to expand...
Click to collapse
is not possible because not enter recovery mode
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
nicholas said:
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
Click to expand...
Click to collapse
in another, no. but if I made a partition and install windows 7. because when I had that the above operating Sintema and now I have windows 8.1. equally before attempting this update had istalado istalar Sony PC Companion with all drivers
is known about this? http://forum.xda-developers.com/showpost.php?p=49715447&postcount=13
hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.
As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?
thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).
just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit
Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.
You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.
thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure
Hi guys!
I would seriously appreciate help with this case.
I have friend's Xperia J on my hands, trying to bring it back to life.
The situation is like this:
The phone had failed upgrade to Jelly Bean (I have no specific info how that happened). Now it boots, goes through 'Android is upgrading' phase (optimising applications), goes to homescreen, and then after a few moments a lot of crashes happen (for example "Unfortunatelly DownloadAgent has stopped working") and after some time (usually 1 min) phone freezes and restarts.
To me it seemed like an easy case - just reflash stock firmware and we're good. So i've tried repairing through PC Sony Companion, but when I am told by software to put the phone into flash mode (vol down + usb cable) it just sits there not detecting the phone. I've tried windows 8.1 and windows 7 machines and usb 2.0 with sony cable.
Next, I've tried flashtool, also installing flashtool drivers. When I'm told to plug usb cable, it only goes to 'Reading device information' and just sits there. (Green led is lit).
When I check drivers with phone in flash mode this is what I get:
11/029/2015 13:29:56 - INFO - List of connected devices (Device Id) :
11/029/2015 13:29:56 - INFO - - USB\VID_0FCE&PID_ADDE\5&212AC8FC&0&3 Driver installed : true
So, I'm kind of out of options here, and any help would be appreciated! Also, I suppose that 'USB Debugging' is not turned on, it is hard to check with all those crashes happening, but I dont think it matters.
Thank you for any suggestion :good:
Try with different cable, and connect it on back usb port. I had problems with flashing with original cable that comes with phone, now i use short 10cm from Nokia. I haven't had any problems since.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Can anyone please help. im stuck in a difficult problem. I cant enter recovery, my phone just loops, and i cant connect it to my pc. Just getting USB device not recognized. The last usb device you connected to this computer malfunctioned, and windows does not recognize it. I dont know how to add a new software or restore a backup, and i got a seious battery drain issue. Hope someone can help me. Im on Slim X rom on a E6653.
Download a MM, LP or Nougat firmware.
Let the phone charge and go to flashtool
Load the firmware you downloaded check all the wipe section case and put your phone on flashmode (vol - and stick USB cable while maintaining vol -)
Let flashtool do it's work and once done it should be OK
I have tried that, but my computer cant fin my phone, so i cant use flashtool
I found out of it. Had a faulty usb cord. Im happy again.
Hehe no problem