Guys my m2 stuck in semc flash device..
When i connect with pc..
In device manager it shows semc flash....
No flashmode and fastboot mode when i press volume down and up keys.
Flashtool doesn't detected..
Sony pc companion doesn't detected
Please help me..
I don't knw what to do!!
Connect your phone, go to device manager and uninstall the driver and disconnect your phone,
Now if you're running Windows 8+ restart your PC with driver signature enforcement disabled through advance boot, now go to C:\Flashtool\drivers and open the driver installer and install Flashmode and fastboot drivers and now connect your phone and go to device manager and install the Sony Xperia M2 driver http://developer.sonymobile.com/downloads/drivers/xperia-m2-driver/
Once that's done open your sim/microsd tray and use a pin and click on the red button inside the hole,
Now connect your phone to your PC and tell me what it says in device manager and later open PC companion and see what it detects
Help
What you said i did..
But my phone is detected as semc flash device..
Device doesn't goes to flashmode or fastboot mode...
If i connect my device in another pc which doesn't have any drivers for adb or Xperia m2.
It shows "qhusb bulk" in device manager..
I don't know what it means?
Only red light blinking
...
Related
when i'm flashing, still stuck on there after waiting 30 minutes
and the application cant read my device info
sorry for my bad english
Hey
First of all,download correct drivers for pc usb port,and then reinstall miro driver.the rest that u must to know is here...
Download and install universal adb drivers.
Then connect your phone and it may ask to install drivers.
Once drivers are installed, remove usb.
Start flashtool and select flashmode from flashtool.
Select the ftf file.
Connect your phone usb after flashtool asks to connect it.
Let it flash.
All the best.
Sent from my ST23i
My brother's sony xperia j stuck in sony screen when turning it on ,
the bad thing is that when i connect it in flash mode, the pc doesnt recognize it and no change happen as it's not connected
i tried more caples and laptops, none recognized the phone even in the normal mode when it's in sony screen
i installed pc companion 2.1 , didn't solve it
i installed latest flash tool drivers for xperia j and flashmode and fastboot drivers ,didn't solve it
i connected another phone's to the pc and the pc recognized them well
the problem of sony screen started when i was trying to instal recovery for the phone with recovery.bat file ,at that time the phone was recognized only in normal mode and after connecting and dissconnecting it several times. but flash mode not recognized from the first time and thats why i coudln't flash a recovery.ftf file .
now my phone doesn't entre recovery and can't be recognized by pc.
i'm also out of ideas ,so please help
Yesterday I want update my Xperia C3 to Android 5.0.2 (use flashtool), but when I connect my device to PC, it show a "qhsusb_bulk" device connect to Windows(not SEMC Driver),and my computer auto install driver for it, then I open the falshtool, falshtool show error message for me :
##Device connected with USB debugging off
##For 2011 devices line, be sure you are not in MTP mode
before I connect to PC , I had open USB debug and disable MTP mode
and I already installed the flashmode driver ,flashtool still show this error message
(I was flash rom success before, but fail this time )
My PC system is windows 8.1 (I also try on win7, also fail...)
My Xperia C3 is Android 4.4.2, I can enter the fastboot mode and system (except can't enter flashmode)
anything wrong? I want to cry!!
Anyone can help me?? Thank a lot!!
SORRY FOR MY ENGLISH , I AM TAIWANESE...
Hi
Post in Xperia c3 section for better help
http://forum.xda-developers.com/sony-xperia-c/help
Good day !
I have Miro phone and my phone war soft brick yesterday
I want to flash my phone to solve this problem
but i couldn't connect my phone to my PC
I installed PC companion and Sony Miro USB Drivers
but again windows couldn't found my phone
In one sec it connect and in one sec it reconnect (connect with this error
"USB Device Not Recognized" )
can anybody help me please ?
I am using flashtool version 0.9.18.6,
Installed z3 drivers from directory flashtool/drivers.
When phone is turned on check driver shows serial no & drivers installed true
After booting in flashmode there are these errors
Use debugging is off(its on)
Check device not in mtp mode
Windows notification shows us device not recognized
I have pc companion installed,& previously used the same laptop for flashing
There is problem with restart need to use yellow reset button every time,is it interfering with flashtool,will flashing fix it????