Fastboot Mode Xperia J St26i - Sony Xperia Miro, Tipo (Dual), J, E

Hello.
I have the Xperia J St26i and I can not enter in fastboot mode.
I've done every which way, I've searched, read a lot about it and I can't.
I've tried with vol +, vol-, with USB cable connected, restart with the flashtool and nothing.
Never shows the blue light.
I've tried to install with that ' install.bat ' file ' of the CWR and I can't.
I want to do the Unlock Bootloader but I need to enter fastboot.
I can't do anything without the fastboot.
My service provider is Vodafone Portugal, I don't know if it makes any difference.
And don't forget, there is no problem when entering the flash mode, enter perfectly.
I've tried a number of the same processes with different build numbers but nothing.
Don't forget the detail of the model St26i.
Thanks for the attention

Keep pressing Vol+ and then connect the USB cable, LED will show blue and welcome, you're in fastboot mode.

fercalbla said:
Keep pressing Vol+ and then connect the USB cable, LED will show blue and welcome, you're in fastboot mode.
Click to expand...
Click to collapse
the blue light does not turn on

If i remember correctly, you need flashmood (green led) to unlock bootloader, then you can connect phone to Fastboot (blue led). Probably you have problem with drivers, you can install them from Flashtool. Or try with different cable, i can't connect my M2 with stock Sony's cable.
Good Luck
Xperia M2 D2303 on K.K. 4.4.4

Related

[Q] problema lock patern (my kid's) worng mail usb debugging off

hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.
As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?
thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).
just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit
Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.
You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.
thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure

Hardbrick xperia m2 aqua? Heeeeelp!

hello I'm desperate behind a solution, it will ...
I install the rom stock lollipop by ftf the xperia m2 aqua and after the cell procedure does not start nor identifies more flashmode, when I connect the pc shows that he was connected to mtp mode and the device does not care any more solution please, do not I have more to send him to the assistance, cry:crying:
note: bootloader locked
Power off the phone by: press with something sharp hole by simcard, or hold volume up (+) and power button together, you'll feel vibration, hold it little more until another vibration, now your phone is off.
Now prepare ftf in Flashtool (don't use latest one, use 9.18.6) when it prompt to connect the phone, press volume down and connect it. Wait till it finishes.
You can also use PC Companion repair option, it have SUS integrated in it.
Good Luck.
Sent from my D2303

Unable to Enter Flashmode on Xperia Z5

I have followed every tutorial I can find but am still unable to enter flash mode.
I have flashtool installed and have downloaded the drivers.. When I press volume down and plug on micro USB the phone flashes a red and green LED and then boots up normally.
Any help appreciated.
Still stuck with this problem...is it possible to uninstall the drivers and maybe reinstall them? If so, where would I find the drivers to uninstall?

Xperia C3 dual (D2502) won't goto flash mode

Pressing ctrl + down and connect to pc makes led turn green,
Then suddenly turn red and goes to charge mode and turn phone on.
pls help me guys.
My device successfully goes into fastboot but not flashmode.
Pls help with it.
Used tools
1. Flash tool
2. Sony pc companion
I can't flash firmware, Pls help me

[Completed] xperia z1 bricked in USB debugging off mode

hello all!!
yesterday i have flashed twrp.img using twrp in my xperia z1 at that time usb debugging was turned off. After once i switched off xperia z1 it did not started. I have tried by charging it. When i connect my charger LED blinks twice or thrice and turned off. So i tried to flash it with stock rom but when i tried to connect my phone in flash mode flash tools says phone connected in usb debugging off mode. I tried power+ vol. up button and holding red button allocated near the sim slot..any way to turn usb debugging on without turning phone on or any other way to flash rom...help me please...im stuck...
XDA Visitor said:
hello all!!
yesterday i have flashed twrp.img using twrp in my xperia z1 at that time usb debugging was turned off. After once i switched off xperia z1 it did not started. I have tried by charging it. When i connect my charger LED blinks twice or thrice and turned off. So i tried to flash it with stock rom but when i tried to connect my phone in flash mode flash tools says phone connected in usb debugging off mode. I tried power+ vol. up button and holding red button allocated near the sim slot..any way to turn usb debugging on without turning phone on or any other way to flash rom...help me please...im stuck...
Click to expand...
Click to collapse
Greetings and welcome to assist. Have tried xperia companion ? I have also found these 2 threads that may help
https://forum.xda-developers.com/xperia-z1/help/hard-bricked-xperia-z1-please-help-t3355676
https://forum.xda-developers.com/xperia-z1/help/xperia-z1-bricked-t3460027
Good luck
Sawdoctor

Categories

Resources