hello I'm desperate behind a solution, it will ...
I install the rom stock lollipop by ftf the xperia m2 aqua and after the cell procedure does not start nor identifies more flashmode, when I connect the pc shows that he was connected to mtp mode and the device does not care any more solution please, do not I have more to send him to the assistance, cry:crying:
note: bootloader locked
Power off the phone by: press with something sharp hole by simcard, or hold volume up (+) and power button together, you'll feel vibration, hold it little more until another vibration, now your phone is off.
Now prepare ftf in Flashtool (don't use latest one, use 9.18.6) when it prompt to connect the phone, press volume down and connect it. Wait till it finishes.
You can also use PC Companion repair option, it have SUS integrated in it.
Good Luck.
Sent from my D2303
Related
i was doing regular update of android 5.0 then i connected my mobile in prepare stage i found my mobile shutting down and pc tells me disconnect and reconnect while pressing volume down i reconnected but not recognised i dont know what happened its now dead i tried all solutions i could find
1-software repair
2-power + volume up
any ideas how i can flash software into my xperia as if i can use flashtool to recover my z3 duel
Try connecting it to PC Suite. IF it doesn't detect it, then download your appropriate firmware, flash it via falshtool. If it fails to recognize your device, charge it for an hour or so, and then try pressing power and volume keys till flashtool recognizes your phone. It's like searching in the dark but mine worked that way.
Hi, I'm a little perplexed, how is there regular update to 5.0 already?
@Ultraman1966 I guess he is trying to flash one of those AOSP lollipop ROMs...
good night, i instaled Error Executing updater binary in zip on OnePlus One, this video , but i have xperia z3 dual stock rom android 5 and not power on now, not blink led, not charge, not reset to try sony pc companion or fashtools.
https://www.youtube.com/watch?v=1J7nqguhTZ8
You tried to put it in flashmode? Press volume down while you plug the usb cable into your computer. Or fastboot mode, with the volume up pressed?
All that with Flastool opened.
i try , led not utrn on, not change, not blink , pc not recognize ,i try put in recover to try fix install zip
Hello.
I have the Xperia J St26i and I can not enter in fastboot mode.
I've done every which way, I've searched, read a lot about it and I can't.
I've tried with vol +, vol-, with USB cable connected, restart with the flashtool and nothing.
Never shows the blue light.
I've tried to install with that ' install.bat ' file ' of the CWR and I can't.
I want to do the Unlock Bootloader but I need to enter fastboot.
I can't do anything without the fastboot.
My service provider is Vodafone Portugal, I don't know if it makes any difference.
And don't forget, there is no problem when entering the flash mode, enter perfectly.
I've tried a number of the same processes with different build numbers but nothing.
Don't forget the detail of the model St26i.
Thanks for the attention
Keep pressing Vol+ and then connect the USB cable, LED will show blue and welcome, you're in fastboot mode.
fercalbla said:
Keep pressing Vol+ and then connect the USB cable, LED will show blue and welcome, you're in fastboot mode.
Click to expand...
Click to collapse
the blue light does not turn on
If i remember correctly, you need flashmood (green led) to unlock bootloader, then you can connect phone to Fastboot (blue led). Probably you have problem with drivers, you can install them from Flashtool. Or try with different cable, i can't connect my M2 with stock Sony's cable.
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Only Red Led Blinks When Connected To USB Or Charging , WHSHUA Tool Also Doesnt Detect The Phone . Please Help I Shown My Phone To Mobile Repair Shop They Told Me You Have Boot Breaked The Phone . Help Me To Solve This ?
please help us
i have the same problem guys and i've tried every possible way in this forum
please let us know what youve done on your phone before this things happen.
you have to force your pc to install your phones driver so wmshua can detect your phone.
try to connect your phone to computer via usb cable without backcover then hold the power and volume down, while holding press reset button of your xperia c, don't release the power and volume just wait to your computer response, if you see installing driver then that's your lucky day if not try it again.
and one last thing you can try to turnoff your phone by holding power/volume+/voume- for couple of seconds, when you successfully turn your phone off try to connect the use cable to the computer first then while connecting to your phone hold power and volume- and wait if your pc install the driver.
hope this may help you guys.
Hi Guys!
May I request a guide to turn on/off sony xzp using ADB commands. My volume rockers are broken, and Im afraid to flash custom rom in case I got softbrick.
Thanks,
MrGrey
Solved.
Here's how for future reference if someone encounters a similar issue.
1. Disconnect battery and reconnect it
2. Download and install Xperia Companion Tool from Sony (tested on Mac, but the Windows version should work as well)
3. Choose Repair Software/Xperia on the Companion tool
4. Connect phone to computer using a USB cable
5. Disconnect phone when the Xperia splashscreen appears.
Done.