Related
I have downloaded a firmware from Sammobile but I only want to install the system part not the csc modem and bootloader stuff.
How do I do that?
Sent from my SM-P905 using Tapatalk
milan188 said:
I have downloaded a firmware from Sammobile but I only want to install the system part not the csc modem and bootloader stuff.
How do I do that?
Sent from my SM-P905 using Tapatalk
Click to expand...
Click to collapse
Hi , just follow the below steps
1 . Extract the rom.zip file (from which is downloaded from sammobile )
2 . You can see a *.tar.md5 file and rename it into *.tar
3 . Extract it using Winrar or something like that .
4 . There is a system.img file . Extract img file using any app from Google ( I am using dsixda's kitchen for that purpose )
5 . Insert the system folder into a custom rom available for it .
6 . You successfully installed it .
Sent from my GT-S7562 using XDA Premium 4 mobile app
There aren't any custom roms for P-905
Sent from my SM-P905 using Tapatalk
I second that!
milan188 said:
There aren't any custom roms for P-905
Sent from my SM-P905 using Tapatalk
Click to expand...
Click to collapse
You can simply search on Google to how to make custom rom from device .
Sent from my GT-S7562 using XDA Premium 4 mobile app
First part of above advices was ok - assuming ur using Windows, download tar.md5 image, open it in WinRar or 7zip (if it shows an error of improper end of file ignore it - it's caused by md5 checksum concatenated at the end of tar archive, even if not recognized by archiver software, it's not interfering with archive content itself at all) end extract partition images that you want to flash (in your case that would be system.img only).
Now, download and extract this tool:
http://forum.xda-developers.com/showthread.php?t=2446269
and simply drag chosen img file (don't change its name! It shall remain "system.img"! Filename seems to be the only factor telling Odin about which partition he should flash the image!) over a *.bat icon. In a while, system.tar.md5 file will be created (and you can even change its name ;D ) and that is what you wanted.
Thank you for your proper answer!
Sent from a Galaxy S4
milan188 said:
Thank you for your proper answer!
Sent from a Galaxy S4
Click to expand...
Click to collapse
thanks too !
Here is the double tap to wake installer. Just install this apk, open it up and move the slider to the right. (It's written in Chinese) Then you will be able to double tap the screen when the screen is off to wake up the phone.
https://www.dropbox.com/s/flr6nvtmi7gaab6/DoubleTapToWake-GEM-703L.apk?dl=0
I have also decompiled the apk and changed everything from Chinese to English. Put this file in your system/app folder and make sure to set the permissions. Then restart your phone. I am integrating it into my KangVIP ROMS later tonight.
https://www.dropbox.com/s/fq30aijcf0cqnw5/HWMotionWakeup.apk?dl=0
**If you have erratic screen touches after installing this, it is a problem with some of our phones when enabling double tap to wake. It works well on some and some it doesn't play nice with. If you experience erratic touch screen issues simply open the app and toggle the switch back to the left**
ajsmsg78 said:
Here is the double tap to wake installer. Just install this apk, open it up and move the slider to the right. (It's written in Chinese) Then you will be able to double tap the screen when the screen is off to wake up the phone.
https://www.dropbox.com/s/flr6nvtmi7gaab6/DoubleTapToWake-GEM-703L.apk?dl=0
I have also decompiled the apk and changed everything from Chinese to English. Put this file in your system/app folder and make sure to set the permissions. Then restart your phone. I am integrating it into my KangVIP ROMS later tonight.
https://www.dropbox.com/s/fq30aijcf0cqnw5/HWMotionWakeup.apk?dl=0
**If you have erratic screen touches after installing this, it is a problem with some of our phones when enabling double tap to wake. It works well on some and some it doesn't play nice with. If you experience erratic touch screen issues simply open the app and toggle the switch back to the left**
Click to expand...
Click to collapse
hello my friend can i try your rom in my p8max?
rowihel2012 said:
hello my friend can i try your rom in my p8max?
Click to expand...
Click to collapse
It won't work on your P8 Max as is. I'd have to port it over but I have no time right now. Maybe in the next few weeks I can make a debloated ROM for the P8 Max but I don't own the phone so it's difficult.
ajsmsg78 said:
It won't work on your P8 Max as is. I'd have to port it over but I have no time right now. Maybe in the next few weeks I can make a debloated ROM for the P8 Max but I don't own the phone so it's difficult.
Click to expand...
Click to collapse
so we wont see cyngonmod room soon?
rowihel2012 said:
so we wont see cyngonmod room soon?
Click to expand...
Click to collapse
Probably never
Hi! Someone else with this problem?
TristeFigura said:
Hi! Someone else with this problem?
Click to expand...
Click to collapse
In About Phone tell me what the kernel version says and which model of X2 are you using. Also what system are you on (B109, B110)
It looks like this. I have a 702L and now it says B110 after cust update (it said b109 before, I didn't try the double tap then though). I am on KangVIP slim.
TristeFigura said:
It looks like this. I have a 702L and now it says B110 after cust update (it said b109 before, I didn't try the double tap then though). I am on KangVIP slim.
Click to expand...
Click to collapse
Which cust update did you flash?
ajsmsg78 said:
Which cust update did you flash?
Click to expand...
Click to collapse
I flashed the "GEM-702L Cust Installer.zip" with TWRP.
I do also have a copy of my original cust folder, should I use that instead?
TristeFigura said:
I flashed the "GEM-702L Cust Installer.zip" with TWRP.
I do also have a copy of my original cust folder, should I use that instead?
Click to expand...
Click to collapse
I'll send u a flashable universal cust zip that you can try...give me a min. With the cust, you can tell which version of cust your phone is using. Yours says it's a GEM-703L which means you're using the 703L cust which is in cust/dualcu/cn. if you're on the 702L cust it will say you are using a 702L in the model category. If you flash this and it doesnt do anything i'll make you a flashable cust for your 702L only.
https://drive.google.com/file/d/0B5I_q70mNuR4V3A1VllvaDFRNnc/view?usp=sharing
ajsmsg78 said:
I'll send u a flashable universal cust zip that you can try...give me a min. With the cust, you can tell which version of cust your phone is using. Yours says it's a GEM-703L which means you're using the 703L cust which is in cust/dualcu/cn. if you're on the 702L cust it will say you are using a 702L in the model category. If you flash this and it doesnt do anything i'll make you a flashable cust for your 702L only.
https://drive.google.com/file/d/0B5I_q70mNuR4V3A1VllvaDFRNnc/view?usp=sharing
Click to expand...
Click to collapse
Flashed that and no change... Same phone info in settings.
See my cust folder and the stock one I backed up when I was in B003. The dualcu folder was not there in B003... Should I delete my cust and replace it with my stock one?
Double post...
TristeFigura said:
Flashed that and no change... Same phone info in settings.
See my cust folder and the stock one I backed up when I was in B003. The dualcu folder was not there in B003... Should I delete my cust and replace it with my stock one?
Click to expand...
Click to collapse
Your original cust that you backed up in the hw folder is there a seas and spcseas folder in there? In data/cust put the seas folder in there in TWRP so the permissions are correct. If that doesn't work put the spcseas folder in there.
ajsmsg78 said:
Your original cust that you backed up in the hw folder is there a seas and spcseas folder in there?
Click to expand...
Click to collapse
Yes, both seas and spcseas!
ajsmsg78 said:
In data/cust put the seas folder in there in TWRP so the permissions are correct. If that doesn't work put the spcseas folder in there.
Click to expand...
Click to collapse
When I go to data/cust, it jumps to cust/dualcu/cn. Should I put the seas folder in there (there is no such folder in there now, see screenshot)?
When you say TWRP, do you mean a plain copy-paste, or is it there another way? How should the permissions look like after copying?
TristeFigura said:
Yes, both seas and spcseas!
When I go to data/cust, it jumps to cust/dualcu/cn. Should I put the seas folder in there (there is no such folder in there now, see screenshot)?
When you say TWRP, do you mean a plain copy-paste, or is it there another way? How should the permissions look like after copying?
Click to expand...
Click to collapse
Go to Mount and mount data and cust. Go into Advanced, and File Manager. Delete everything in data/cust. Then go into cust/hw/seas and copy everything from there into data/cust, then reboot. If that doesn't work i'll give you a zip u can just flash that will delete your current cust and replace it with the 702L one.
ajsmsg78 said:
Go to Mount and mount data and cust. Go into Advanced, and File Manager. Delete everything in data/cust. Then go into cust/hw/seas and copy everything from there into data/cust, then reboot. If that doesn't work i'll give you a zip u can just flash that will delete your current cust and replace it with the 702L one.
Click to expand...
Click to collapse
Sorry, not working... I've tried both with seas and spcseas, both from trwp and with solid Explorer, both with permissions -rwxr-xr-x and -rw-r--r-- (folders always drwxr-xr-x)
Do you need my cust folder to make the flashable, or do you have a standard stock that you think will work?
Man, thank you for helping, I start feeling this is too much asking...
TristeFigura said:
Sorry, not working... I've tried both with seas and spcseas, both from trwp and with solid Explorer, both with permissions -rwxr-xr-x and -rw-r--r-- (folders always drwxr-xr-x)
Do you need my cust folder to make the flashable, or do you have a standard stock that you think will work?
Man, thank you for helping, I start feeling this is too much asking...
Click to expand...
Click to collapse
Yeah zip up your cust folder that works and send me a link download.
ajsmsg78 said:
Yeah zip up your cust folder that works and send me a link download.
Click to expand...
Click to collapse
Sent PM
ajsmsg78 said:
Yeah zip up your cust folder that works and send me a link download.
Click to expand...
Click to collapse
Well, it is working now... I installed B111 and cust B111 and I got into bootloops, so I restored my nandroid backup B109. Now the app is working (although phone info says B111).
So it is weird, something with my cust doesn't really want to work...
Hi guys,
I downloaded the full OTA 571 from the link here. Unzipped it and found one file "update.app". I loaded this file in "dload" folder on my SD card. Then followed what I normally did before to upgrade from SD card. but it failed right away....any idea what's going on? Thanks!
Same issue here... I'm on c900b560
rollingrcok said:
Hi guys,
I downloaded the full OTA 571 from the link here. Unzipped it and found one file "update.app". I loaded this file in "dload" folder on my SD card. Then followed what I normally did before to upgrade from SD card. but it failed right away....any idea what's going on? Thanks!
Click to expand...
Click to collapse
You don't need to unzip OTA package. You should leave it in zip file.
Only full package you need to unzip.
Sent from my HUAWEI MT7-L09 using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:44 AM ----------
Jvan exodvs said:
Same issue here... I'm on c900b560
Click to expand...
Click to collapse
First change region to eu. Here's how to do it:
Download this file:
https://mega.nz/#!UsZz1JJY!8y92sSzjRhalMhrq2dImF87iNneJ8HpXmh6KQ8Eo8LI
now copy oeminfo to dev/block/platform/hi_mci.0/by-name/ and set permissiom to 0777
now copy custom bin to system root/data and set permission to 0777
Go to system root/system and edit build.prop
ro.build.flavor=JAZZ-user
ro.product.model=JAZZ
to
ro.build.flavor=MT7-L09-user
ro.product.model=HUAWEI MT7-L09
save and reboot. Now download full package C432B560 unzip it to get UPDATE.APP and flash it.
Now go to updater and download OTA B571.
That's it.
Sent from my HUAWEI MT7-L09 using Tapatalk
Ok I will try it! Thanks.
Sorry I can't find the path on internal drive you mentioned. Could you explain a little more? Thanks!
Pablo87 said:
You don't need to unzip OTA package. You should leave it in zip file.
Only full package you need to unzip.
Sent from my HUAWEI MT7-L09 using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:44 AM ----------
First change region to eu. Here's how to do it:
Download this file:
https://mega.nz/#!UsZz1JJY!8y92sSzjRhalMhrq2dImF87iNneJ8HpXmh6KQ8Eo8LI
now copy oeminfo to dev/block/platform/hi_mci.0/by-name/ and set permissiom to 0777
now copy custom bin to system root/data and set permission to 0777
Go to system root/system and edit build.prop
ro.build.flavor=JAZZ-user
ro.product.model=JAZZ
to
ro.build.flavor=MT7-L09-user
ro.product.model=HUAWEI MT7-L09
save and reboot. Now download full package C432B560 unzip it to get UPDATE.APP and flash it.
Now go to updater and download OTA B571.
That's it.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Did it work ?
Not yet...I can't find the path you mentioned, like "dev/block/platform/hi_mci.0/by-name/ ". Could you explain a little more?
Pablo87 said:
Did it work ?
Click to expand...
Click to collapse
rollingrcok said:
Not yet...I can't find the path you mentioned, like "dev/block/platform/hi_mci.0/by-name/ ". Could you explain a little more?
Click to expand...
Click to collapse
Do you have root?
Sent from my HUAWEI MT7-L09 using Tapatalk
No I don't. If that requires rooting, maybe I will just pass it. I am not going to root my phone.
Pablo87 said:
Do you have root?
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
rollingrcok said:
No I don't. If that requires rooting, maybe I will just pass it. I am not going to root my phone.
Click to expand...
Click to collapse
That's like you own pc but you're not administrator but limited user. But ok it's your choice.
Sent from my HUAWEI MT7-L09 using Tapatalk
help
Pablo87 said:
You don't need to unzip OTA package. You should leave it in zip file.
Only full package you need to unzip.
Sent from my HUAWEI MT7-L09 using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:44 AM ----------
First change region to eu. Here's how to do it:
Download this file:
now copy oeminfo to dev/block/platform/hi_mci.0/by-name/ and set permissiom to 0777
now copy custom bin to system root/data and set permission to 0777
Go to system root/system and edit build.prop
ro.build.flavor=JAZZ-user
ro.product.model=JAZZ
to
ro.build.flavor=MT7-L09-user
ro.product.model=HUAWEI MT7-L09
save and reboot. Now download full package C432B560 unzip it to get UPDATE.APP and flash it.
Now go to updater and download OTA B571.
That's it.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
can you help me im on c900 and do like u write and dont work still in c900
Pablo87 said:
ro.build.flavor=JAZZ-user
ro.product.model=JAZZ
to
ro.build.flavor=MT7-L09-user
ro.product.model=HUAWEI MT7-L09
save and reboot. Now download full package C432B560 unzip it to get UPDATE.APP and flash it.
Now go to updater and download OTA B571.
That's it.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Hey Pablo,
I did what you said, the region changed, but it didn't help to update to b571 via normal update procedure. I had to use TWRP backup.
And build.prop keeps changing those two lines back to JAZZ, but this doesn't affect the region or settings->about phone menu.
So I think there is something else needs to be fixed to get rid of JAZZ.
--
Max
Pablo87 said:
You don't need to unzip OTA package. You should leave it in zip file.
Only full package you need to unzip.
Sent from my HUAWEI MT7-L09 using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:44 AM ----------
First change region to eu. Here's how to do it:
Download this file:
https://mega.nz/#!UsZz1JJY!8y92sSzjRhalMhrq2dImF87iNneJ8HpXmh6KQ8Eo8LI
now copy oeminfo to dev/block/platform/hi_mci.0/by-name/ and set permissiom to 0777
now copy custom bin to system root/data and set permission to 0777
Go to system root/system and edit build.prop
ro.build.flavor=JAZZ-user
ro.product.model=JAZZ
to
ro.build.flavor=MT7-L09-user
ro.product.model=HUAWEI MT7-L09
save and reboot. Now download full package C432B560 unzip it to get UPDATE.APP and flash it.
Now go to updater and download OTA B571.
That's it.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
please must i root my phone b4 i could change region. thanks
Sent from my JAZZ using Tapatalk
max_rnd said:
Hey Pablo,
I did what you said, the region changed, but it didn't help to update to b571 via normal update procedure. I had to use TWRP backup.
And build.prop keeps changing those two lines back to JAZZ, but this doesn't affect the region or settings->about phone menu.
So I think there is something else needs to be fixed to get rid of JAZZ.
--
Max
Click to expand...
Click to collapse
It can't change lines automatically. Something you didn't do right. Maybe you didn't mount /system partition as RW?
Sent from my HUAWEI MT7-L09 using Tapatalk
---------- Post added at 08:17 PM ---------- Previous post was at 08:16 PM ----------
ogooemeka said:
please must i root my phone b4 i could change region. thanks
Sent from my JAZZ using Tapatalk
Click to expand...
Click to collapse
Khmmm. Yes, you can't change boild.prop without root.
Sent from my HUAWEI MT7-L09 using Tapatalk
I had my Huawei Mate 9 bricked, tried several firmwares but always get a message "Software install failed. Get help from http://emui.com/emotiondownload.php?mod=restore", finally found a firmware in this post https://forum.xda-developers.com/ma...o-bootloop-t3534594/post70465883#post70465883 with this link drive.google.com/open?id=0B9GG_Oe0gQDyUWlCS3lTRm5IOUE
This firmware unbricked my phone but now I have EMUI 3.1 Android 5.1 and my model number change from MHA-L29 to M300-L29 , also says that my phone only has 2 GB RAM
My compilation is MHA-L29BC605B111a
How can correctly restore my phone?
Thanks in advance
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page26
gm007 said:
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page26
Click to expand...
Click to collapse
Only problem is that I have not access to my router configuration, is there another way to use FunkyHuawei?
diego.pedroza said:
Only problem is that I have not access to my router configuration, is there another way to use FunkyHuawei?
Click to expand...
Click to collapse
The link doesn't have any router modifications,just read.
gm007 said:
The link doesn't have any router modifications,just read.
Click to expand...
Click to collapse
I'm stuck on step 3- restore oeminfo for C636
Following a post for restore OEM INFO I download IMEI-Hack-Tool-v10 but app always ask for check root permissions but cannot find any option to give root access to adb no my developer settings
Any advice?
diego.pedroza said:
I'm stuck on step 3- restore oeminfo for C636
Following a post for restore OEM INFO I download IMEI-Hack-Tool-v10 but app always ask for check root permissions but cannot find any option to give root access to adb no my developer settings
Any advice?
Click to expand...
Click to collapse
Do you have unlocked bootloader? TWRP recovery?
gm007 said:
Do you have unlocked bootloader? TWRP recovery?
Click to expand...
Click to collapse
Yes, Bootloader unlocked and TWRP 3.0.2-2 version installed
diego.pedroza said:
Yes, Bootloader unlocked and TWRP 3.0.2-2 version installed
Click to expand...
Click to collapse
Do a backup for oeminfo in twrp,than replace oeminfo files with the one for c636 and restore oeminfo in twrp,then continue with dload....
gm007 said:
Do a backup for oeminfo in twrp,than replace oeminfo files with the one for c636 and restore oeminfo in twrp,then continue with dload....
Click to expand...
Click to collapse
I did backup, but how replace oeminfo files with the one for c636, just copy with twrp file manager into oem folder?
Is there any way to check that I did it correctly?
diego.pedroza said:
I did backup, but how replace oeminfo files with the one for c636, just copy with twrp file manager into oem folder?
Is there any way to check that I did it correctly?
Click to expand...
Click to collapse
use the help of an sd card and ur pc.
gm007 said:
use the help of an sd card and ur pc.
Click to expand...
Click to collapse
Sorry for the ignorance but exactly how?
I have connected my device and has zip file on my sd card.
where should copy the files?
should replace other files?
after this is there any other procedure to complete this operation?
diego.pedroza said:
Sorry for the ignorance but exactly how?
I have connected my device and has zip file on my sd card.
where should copy the files?
should replace other files?
after this is there any other procedure to complete this operation?
Click to expand...
Click to collapse
When you do oeminfo backup ,you should have a folder name twrp, inside this folder there is many subfolders.
In last folder there is 2-3 files,those files should be replaced with c636 oeminfo that you have downloaded from first page.
Once replaced, put this folder on ur sd card and boot to twrp recovery than restore it.
gm007 said:
When you do oeminfo backup ,you should have a folder name twrp, inside this folder there is many subfolders.
In last folder there is 2-3 files,those files should be replaced with c636 oeminfo that you have downloaded from first page.
Once replaced, put this folder on ur sd card and boot to twrp recovery than restore it.
Click to expand...
Click to collapse
Follow until step 7 and now I have my device working perfectly and rooted.
Thanks so much!!
:good:
diego.pedroza said:
Follow until step 7 and now I have my device working perfectly and rooted.
Thanks so much!!
:good:
Click to expand...
Click to collapse
Great
Can't install the Global ROM on my MI MIX 3 The xiaomi.eu version works fine though...
Error message from TWRP:
E:String resource 'zip_compatible_err' not found. Using default value.
Zip Treble compatibility error!
Invalid zip file format!
Error installing zip file '/sdcard/miui_MIMIX3Global_V10.0.11.0.PEEMIFH_9761b07e78_9. 0.zip'
Open the zip, delete compatibility.zip inside. Install ???? Profit
Sent from my Mi MIX 3 using Tapatalk
lukatsch said:
Can't install the Global ROM on my MI MIX 3 The xiaomi.eu version works fine though...
Error message from TWRP:
E:String resource 'zip_compatible_err' not found. Using default value.
Zip Treble compatibility error!
Invalid zip file format!
Error installing zip file '/sdcard/miui_MIMIX3Global_V10.0.11.0.PEEMIFH_9761b07e78_9. 0.zip'
Click to expand...
Click to collapse
Sideload it via adb
PWn3R said:
Open the zip, delete compatibility.zip inside. Install ???? Profit
Sent from my Mi MIX 3 using Tapatalk
Click to expand...
Click to collapse
thank you it worked!
lukatsch said:
thank you it worked!
Click to expand...
Click to collapse
Gud. :good:
lukatsch said:
thank you it worked!
Click to expand...
Click to collapse
Can you explain step by step how you managed to get it to work?
I am facing the same issue
PWn3R said:
Open the zip, delete compatibility.zip inside. Install ???? Profit
Sent from my Mi MIX 3 using Tapatalk
Click to expand...
Click to collapse
Should I unzip the file in a new folder, delete the compatibility.zip file inside and then zip again the new folder?
That's what I did to get the message in recovery that the new zip format is not flashable.
Help please!
Nakbleu said:
Should I unzip the file in a new folder, delete the compatibility.zip file inside and then zip again the new folder?
That's what I did to get the message in recovery that the new zip format is not flashable.
Help please!
Click to expand...
Click to collapse
No just open the zip select file and delete. Do not extract. Winrar on phone can do it easily
Mackay53 said:
No just open the zip select file and delete. Do not extract. Winrar on phone can do it easily
Click to expand...
Click to collapse
Excellent! It works finaaly; Many thanks.
You may need to untick signature verification in twrp though.
If your using miflash tool good luck because my mix 3 was soft bricked yesterday and that tool was absolutely useless. I used the all in one tool for the mi max 3 and boom fixed. It would say it flashed with success but the phone was in the same state and there's no flashing a 2.8gb file in 3 seconds anyways.
Hi all . I bought mi mix 3 chinesse version 8 from ebay who was stuck on bootloop. I tried to install stock firmware with fastboot and with adb but nothing happen. Can someone help what to do? Pls and thanks.