I couldn't find any matching search results. I remember with a few phones you couldn't jump over certain updates.
If I'm coming from a custom NE5 4.4.2 and I want to go up to the OK4 firmware, can I do it directly or do I need to step up through with an NK4 or OA6 before the OK4?
Thanks!
If doing it through Odin, you can just flash it. Make sure you power off then boot to download mode.
You may wanna wait, marshmallow update tar file should be available soon.
Sent from my SM-G900P using Tapatalk
Related
New to Android and spent many days reading here and on other sites before recently rooting My Verizon Galaxy S3. It has TWRP Recovery, but still using Stock Rom. I don't know if I will install a custom rom or not. I do know that there will be at least one more OTA update for this phone. Which gives me two choices; block the OTA update to prevent it from being pushed to my phone OR unroot and use Odin to flash back to stock and take the OTA.
I believe that I can block the OTA by using "TB Pro" to freeze the correct update file, which I think is "SDM 1.0" - is this correct? If I go back, what is the most compatible Odin Version to use with the Verizon SG-3?
joekiv said:
New to Android and spent many days reading here and on other sites before recently rooting My Verizon Galaxy S3. It has TWRP Recovery, but still using Stock Rom. I don't know if I will install a custom rom or not. I do know that there will be at least one more OTA update for this phone. Which gives me two choices; block the OTA update to prevent it from being pushed to my phone OR unroot and use Odin to flash back to stock and take the OTA.
I believe that I can block the OTA by using "TB Pro" to freeze the correct update file, which I think is "SDM 1.0" - is this correct? If I go back, what is the most compatible Odin Version to use with the Verizon SG-3?
Click to expand...
Click to collapse
Idk if we'll see another OTA but I like your enthusiasm. Yes, that is correct about TB. You would use the VRBMB1 stock tar to flash in Odin to revert back to out of box factory setup. You would use Odin 3.07. Once that tar is flashed, you'll receive an OTA shortly after rebooting into the rom. It would be for VRBMF1 4.1.2 which is the latest OTA.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Idk if we'll see another OTA but I like your enthusiasm. Yes, that is correct about TB. You would use the VRBMB1 stock tar to flash in Odin to revert back to out of box factory setup. You would use Odin 3.07. Once that tar is flashed, you'll receive an OTA shortly after rebooting into the rom. It would be for VRBMF1 4.1.2 which is the latest OTA.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thank you for that information
Hey all.
I have an Australian SM-G920I on Telstra and have recently rooted using the CF Auto Root method (successfully). I tried flashing TWRP 2.8.6.0 the other day and it wouldn't work. Browsing some threads on here and @Hero mentioned he managed to get TWRP to work once he updated the firmware. However, I can't use the OTA update method as it says that I've modified my OS in an unauthorised way.
Help?
Like in the case of the nexus 6, with lollipop some changes were introduced to the ota checklist procedure. If ANY system files or recovery are modified the ota will fail.
Nothing short of using Odin to go back to 100 %stock will help you. ( and that's assuming Knox plays no role in the ota)
laureanop said:
Like in the case of the nexus 6, with lollipop some changes were introduced to the ota checklist procedure. If ANY system files or recovery are modified the ota will fail.
Nothing short of using Odin to go back to 100 %stock will help you. ( and that's assuming Knox plays no role in the ota)
Click to expand...
Click to collapse
+1
Odin is your only bet to update firmware if you're rooted. The good thing is you can usually update radio (which imo is the most important thing) separately via Odin without having to flash the entire package.
I downloaded this firmware https://www.androidfilehost.com/?fid=95916177934555710
How do I go about flashing it? I've unzipped the files onto my computer but can't find the .tar file to flash with Odin.
Hi! Guys I'm using the tmobile Gs6 do I need to update my firmware?If yes which firmware do I want to update it too. Thanks
Sent from my SM-G920T using XDA Free mobile app
This is the pb1 Odin tar package without the pb1 bootloader and recovery.
Some users may not want to update their bootloader or may want to Odin while keeping the dev aboot and custom recovery intact.
This Odin package only includes the following:
Boot.img
System.img.ext4
Cache.img.ext4
NON-HLOS.bin
Modem.bin
Flash via Odin in the AP slot
https://www.androidfilehost.com/?fid=24533100289590170
I have been trying to find pb1 Odin tar kernel
Sent from my SM-G900V using Tapatalk
sean19661 said:
I have been trying to find pb1 Odin tar kernel
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24533100289590330
There ya go
How do I make the system.img.ext4 and cache.img.ext4 files into system.img and cache.img?
The ROM kitchen I'm using needs .img files
klabit87 said:
https://www.androidfilehost.com/?fid=24533100289590330
There ya go
Click to expand...
Click to collapse
Thank you so much klabit87
Sent from my SM-G900V using Tapatalk
Nandr0idC0nsumer said:
How do I make the system.img.ext4 and cache.img.ext4 files into system.img and cache.img?
The ROM kitchen I'm using needs .img files
Click to expand...
Click to collapse
you need to lookup how to use simg2img
Hi I'm sorry if this is a noob question but I've been out of the game for a while.
I never took the OTA update to Lollipop and am still running on 4.4.2 NCG build with Safestrap 3.75.
If I Odin to this package and flash the kernal, this will bring me up to Android 5 and i'll still be able to keep root and go back to 4.4.2 if I need to since it's not updating the bootloader right?
Sorry if I'm asking a stupid question but just have to ask before I do anything.
Thanks in advance.
thaijunk said:
Hi I'm sorry if this is a noob question but I've been out of the game for a while.
I never took the OTA update to Lollipop and am still running on 4.4.2 NCG build with Safestrap 3.75.
If I Odin to this package and flash the kernal, this will bring me up to Android 5 and i'll still be able to keep root and go back to 4.4.2 if I need to since it's not updating the bootloader right?
Sorry if I'm asking a stupid question but just have to ask before I do anything.
Thanks in advance.
Click to expand...
Click to collapse
I would just safely install one of Jrkruse's ROM's that have the "No Bootloader" Flashable Zips or update to PB1 using Muniz_ri's Update to PB1 and keep root. Which you can find Muniz_ri's here in the General Section and Jrkruse's ROM's in the Android Development section. Just remember to be sure you flash the No Bootloader Zip after installing the ROM and that you install JrKruse's SafeStrap for Lollipop because it won't appear in your app folder after installing these ROM's.
al50 said:
I would just safely install one of Jrkruse's ROM's that have the "No Bootloader" Flashable Zips or update to PB1 using Muniz_ri's Update to PB1 and keep root. Which you can find Muniz_ri's here in the General Section and Jrkruse's ROM's in the Android Development section. Just remember to be sure you flash the No Bootloader Zip after installing the ROM and that you install JrKruse's SafeStrap for Lollipop because it won't appear in your app folder after installing these ROM's.
Click to expand...
Click to collapse
Cool thanks for the prompt reply. I'll give that a shot.
for the record yes this will allow you to still be able to downgrade.
but there are also other ways to get upgraded to lollipop.
This is just what I use just in case something really goes wrong. so i keep my recovery and dev aboot untouched.
of course with a working recovery there are other ways to recover. so to each their own
So I am not rooted and just installed the OTA for 6.0.1. If I Odin with this tar on AP slot will it put me back on PB1 with the ability to root or should I use the full on tar over here:
http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
on AP in Odin to go back and then use the BPB1 root method?
DraconicSeed said:
So I am not rooted and just installed the OTA for 6.0.1. If I Odin with this tar on AP slot will it put me back on PB1 with the ability to root or should I use the full on tar over here:
http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
on AP in Odin to go back and then use the BPB1 root method?
Click to expand...
Click to collapse
Use the full PB1 tar so that you can rollback your bootloader. since it doesnt trip qfuse.
klabit87 said:
This is the pb1 Odin tar package without the pb1 bootloader and recovery.
Some users may not want to update their bootloader or may want to Odin while keeping the dev aboot and custom recovery intact.
This Odin package only includes the following:
Boot.img
System.img.ext4
Cache.img.ext4
NON-HLOS.bin
Modem.bin
Flash via Odin in the AP slot
https://www.androidfilehost.com/?fid=24533100289590170
Click to expand...
Click to collapse
@klabit87 , can you update the link ? Thank you
alin919 said:
@klabit87 , can you update the link ? Thank you
Click to expand...
Click to collapse
I just checked the link constantly for the past hour.
It's good now.
Afh was just having some maintenance downtime :good:
klabit87 said:
I just checked the link constantly for the past hour.
It's good now.
Afh was just having some maintenance downtime :good:
Click to expand...
Click to collapse
In my in is still maintenance now , before it was not available ..... my bad , thanks.
Hello everyone, I need some help here.
I downloaded the latest from sammobile
G900PVPU3CPG1_G900PSPT3CPG1_G900PVPU3CPG1_HOME.tar .md5
and ODIN v3.12.3
I placed the tar file in the AP slot, installed everything, I receive the final okay and the phone reboots to the stock samsung boot animation, and just sits.
Does anyone have any idea why I can't seem to get past the boot animation?
I can pull the battery and install TWRP, and boot to recover fine, but no matter how long the device will NOT get past the boot animation.
Is it possible that I have a bad download? Can I "downgrade" to PE2, without risk of bricking the device somehow?
thanks
Before clicking Start on odin, did you uncheck everything else (autoreboot, f-reset time, re-partition)? I followed all the steps here for that same firmware. It worked for me on first try. Also, did you download the appropriate version for your phone? From what I can see there are 4 versions on sammobile, VMU, SPR, XAS, and BST. I have a Virgin mobile phone, so i got the one with product code VMU.
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Amd4life said:
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Click to expand...
Click to collapse
You may have to boot into recovery and factory reset once ODIN has successfully flashed. Should boot after that.
Sent from my SM-G900P using XDA-Developers mobile app
Any way to Downgrade to lollipop
i tried to flash lollipop by odin but fail
My phone : j700f
Hi.
This is is what I did.
Install TWRP, if you haven't, then install a CUSTOM lollipop ROM from this forum.
If you want stock lollipop, flash it via Odin - after flashing the custom lollipop ROM.
Good luck!
Not working
first flash stock MM then flash stock LL then flash custom LL
Try it again, and make sure that the auto reboot box and F.reset time box is checked in Odin Options
Make sure you flash your country frimware. Else it will fail in odin. And use latest odin.
Bro you need to download latest lollipop firmware
I had the same problem and it was solved by fresh firmware of latest date
Goodluck ?
Sent from my SM-G935F using Tapatalk
WHen I try to downgrade using odin I got error that "NAND Write Start!"
how I can fix???