Hello everyone, I need some help here.
I downloaded the latest from sammobile
G900PVPU3CPG1_G900PSPT3CPG1_G900PVPU3CPG1_HOME.tar .md5
and ODIN v3.12.3
I placed the tar file in the AP slot, installed everything, I receive the final okay and the phone reboots to the stock samsung boot animation, and just sits.
Does anyone have any idea why I can't seem to get past the boot animation?
I can pull the battery and install TWRP, and boot to recover fine, but no matter how long the device will NOT get past the boot animation.
Is it possible that I have a bad download? Can I "downgrade" to PE2, without risk of bricking the device somehow?
thanks
Before clicking Start on odin, did you uncheck everything else (autoreboot, f-reset time, re-partition)? I followed all the steps here for that same firmware. It worked for me on first try. Also, did you download the appropriate version for your phone? From what I can see there are 4 versions on sammobile, VMU, SPR, XAS, and BST. I have a Virgin mobile phone, so i got the one with product code VMU.
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Amd4life said:
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Click to expand...
Click to collapse
You may have to boot into recovery and factory reset once ODIN has successfully flashed. Should boot after that.
Sent from my SM-G900P using XDA-Developers mobile app
Related
Hi.
Well I have a U.S. Cellular SCH-R530 I received from a friend. He already upgraded to 4.3 OTA and I figured I would try to root the phone so I could install custom roms. I downloaded Odin and downloaded cwm 6.0.4.5. I put the phone in download mode and tried flashing cwm.. Well Odin failed, I cannot boot back into the Android OS and I have the screen with the message: "firmware upgrade encountered an issue, etc.". I pulled the battery and put the phone in download mode and I have try flashing cwm again, flashing USCC stock rom and I still get a fail in Odin 3.07 & 3.09. I did use PDA or AP in Odin when I tried to flash both the cwm and the stock 4.3 rom. At this point, I'm trying to figure out how to get the s3 working again.
Nevermind fixed my issue. Please delete thread.
so i am on the latest firmware BOI1 and i decided to root my sprint s6 the other day to try and do a sim unlock. so i am trying now to return it to stock. i downloaded the correct firmware and used the latest odin3(i believe it is the latest) and the md5 check would do good but when i tried to flash the actual firmware it kept hanging on "setupConnection" and fails
Wiped cache and factory reset from recovery. It has hung at getting pit now the last couple times. I re downloaded the firmware directly from sammobile website this time
looking for the pit file. cant seem to find it. does anyone have a link for the 128 gig sprint version? getting desperate here. don't want to do something im gunna regret lol
i found a tutorial to extract it from your phone but without being able to boot up the phone i can not do this. is there a way to run adb commands on a phone stuck in boot loop? is there anyone who can link a valid g920p pit file?
Hey guys I need some help please. I am a bit of a noob and was trying to flash the PartCyborgRom using the BootLoopEdition firmware onto my originally G955U (which I had flashed with the G955U1 FW a while ago). And after I flashed the PartCyborgRom AP file through Odin, nothing happened as in the instructions, so I tried resetting the phone and continued to next step (not a good idea on my part) then I loaded the BL file and midway through that Odin gave me a "FAIL!" and the phone is stuck on Download Mode with the following error "SW REV CHECK FAIL : [system]Fused 2 > Binary 1".
I tried going back to stock and flashing all of the stock fw through Odin, but anytime I try to flash anything I get that same error. If I try to reboot the phone normally it tries to upgrade system but looks like nothing is on the phone anymore and is on bootloop. I am not sure what to do, did I **** up really bad and brick my phone?
I can't even get back into Recovery mode! It simply goes on a boot loop where it doesn't find anything in the system.
PS. when I tried to flash the PartCyborgRom my S8+ was on the latest G955U1 fw.
sebisuarez10 said:
Hey guys I need some help please. I am a bit of a noob and was trying to flash the PartCyborgRom using the BootLoopEdition firmware onto my originally G955U (which I had flashed with the G955U1 FW a while ago). And after I flashed the PartCyborgRom AP file through Odin, nothing happened as in the instructions, so I tried resetting the phone and continued to next step (not a good idea on my part) then I loaded the BL file and midway through that Odin gave me a "FAIL!" and the phone is stuck on Download Mode with the following error "SW REV CHECK FAIL : [system]Fused 2 > Binary 1".
I tried going back to stock and flashing all of the stock fw through Odin, but anytime I try to flash anything I get that same error. If I try to reboot the phone normally it tries to upgrade system but looks like nothing is on the phone anymore and is on bootloop. I am not sure what to do, did I **** up really bad and brick my phone?
I can't even get back into Recovery mode! It simply goes on a boot loop where it doesn't find anything in the system.
PS. when I tried to flash the PartCyborgRom my S8+ was on the latest G955U1 fw.
Click to expand...
Click to collapse
You are trying to flash old firmware. It sounds like you are already on firmware with the v2 bootloader and you're trying to flash firmware with rhe v1 bootloader. You need a stock firmware that has a 2 before the last four digits of the firmware name.
Firmware
It should be all well and good flashing stock firmware with the number 2, but I can't find any on XDA and any links outside either fail or try to make you pay because it's over 2GB... If anyone has a copy and space on their google drive, I'd be very grateful for a valid download link!
btuck812 said:
It should be all well and good flashing stock firmware with the number 2, but I can't find any on XDA and any links outside either fail or try to make you pay because it's over 2GB... If anyone has a copy and space on their google drive, I'd be very grateful for a valid download link!
Click to expand...
Click to collapse
Try sammobile.com.
Free download of the latest firmwares but might be a little slow.
Hello, I'm getting crazy and I don't know what to do anymore.
I have been using the Oreo Rom in the last few days and I wanted to go back to stock firmware using Odin.
I downloaded the last firmware available for my country (ITV) and installed Odin.
The app kept failing when trying to flash and I wasn't able to install the firmware. I tried by flashing only the AP file and I was able to delete TWRP and install the stock recovery. The phone booted up but it acted strange (the touch screen was unresponsive). So I tried to align the CSC using Odin but it kept failing when trying to flash the BL.
I then flashed all files (AP, CP and CSC) without the bootloader and now I have no signal.
Please help me! How do I restore my baseband?
You cannot flash an older baseband through Odin than the one you're on at the moment, at least that's what I was fighting with a few days ago. Check that you're really flashing the latest stock FW and that its baseband is the same as the last one that worked or newer.
I have an ATT branded S22 Ultra (SM-S908U) where I flashed unlocked firmware using Odin (was trying to sign up for 5.0 beta...but even flashing unlocked firmware does not show me sign up option in Samsung Users).
I am now trying to return to stock ATT firmware, however, Odin fails at file analysis for both AVA6 and AVC8 firmware.
Is there anything I'm doing wrong?
Factory wipe. Make sure you are using patch Odin. If it fails and boots to emergency warning screen do not try to get back to stock recovery. Just flash firmware again without factory wipe. I usually have to flash in Odin twice.
explosive0 said:
I have an ATT branded S22 Ultra (SM-S908U) where I flashed unlocked firmware using Odin (was trying to sign up for 5.0 beta...but even flashing unlocked firmware does not show me sign up option in Samsung Users).
I am now trying to return to stock ATT firmware, however, Odin fails at file analysis for both AVA6 and AVC8 firmware.
Is there anything I'm doing wrong?
Click to expand...
Click to collapse
Use Odin 3.13 patched
explosive0 said:
I have an ATT branded S22 Ultra (SM-S908U) where I flashed unlocked firmware using Odin (was trying to sign up for 5.0 beta...but even flashing unlocked firmware does not show me sign up option in Samsung Users).
I am now trying to return to stock ATT firmware, however, Odin fails at file analysis for both AVA6 and AVC8 firmware.
Is there anything I'm doing wrong?
Click to expand...
Click to collapse
If you were on Beta (thats Rev 2) and you're trying to flash back to firmwares on (Rev 1) .....that's why your failing. You can't go back but to AVDC. And no matter what patched Odin you try.....nothing will get you to those firmwares.
*EDIT* I misread your post. But either way those firmware are not able to be flashed. You can only flash firmware within your REV.