I have an ATT branded S22 Ultra (SM-S908U) where I flashed unlocked firmware using Odin (was trying to sign up for 5.0 beta...but even flashing unlocked firmware does not show me sign up option in Samsung Users).
I am now trying to return to stock ATT firmware, however, Odin fails at file analysis for both AVA6 and AVC8 firmware.
Is there anything I'm doing wrong?
Factory wipe. Make sure you are using patch Odin. If it fails and boots to emergency warning screen do not try to get back to stock recovery. Just flash firmware again without factory wipe. I usually have to flash in Odin twice.
explosive0 said:
I have an ATT branded S22 Ultra (SM-S908U) where I flashed unlocked firmware using Odin (was trying to sign up for 5.0 beta...but even flashing unlocked firmware does not show me sign up option in Samsung Users).
I am now trying to return to stock ATT firmware, however, Odin fails at file analysis for both AVA6 and AVC8 firmware.
Is there anything I'm doing wrong?
Click to expand...
Click to collapse
Use Odin 3.13 patched
explosive0 said:
I have an ATT branded S22 Ultra (SM-S908U) where I flashed unlocked firmware using Odin (was trying to sign up for 5.0 beta...but even flashing unlocked firmware does not show me sign up option in Samsung Users).
I am now trying to return to stock ATT firmware, however, Odin fails at file analysis for both AVA6 and AVC8 firmware.
Is there anything I'm doing wrong?
Click to expand...
Click to collapse
If you were on Beta (thats Rev 2) and you're trying to flash back to firmwares on (Rev 1) .....that's why your failing. You can't go back but to AVDC. And no matter what patched Odin you try.....nothing will get you to those firmwares.
*EDIT* I misread your post. But either way those firmware are not able to be flashed. You can only flash firmware within your REV.
Related
Hello everyone, I need some help here.
I downloaded the latest from sammobile
G900PVPU3CPG1_G900PSPT3CPG1_G900PVPU3CPG1_HOME.tar .md5
and ODIN v3.12.3
I placed the tar file in the AP slot, installed everything, I receive the final okay and the phone reboots to the stock samsung boot animation, and just sits.
Does anyone have any idea why I can't seem to get past the boot animation?
I can pull the battery and install TWRP, and boot to recover fine, but no matter how long the device will NOT get past the boot animation.
Is it possible that I have a bad download? Can I "downgrade" to PE2, without risk of bricking the device somehow?
thanks
Before clicking Start on odin, did you uncheck everything else (autoreboot, f-reset time, re-partition)? I followed all the steps here for that same firmware. It worked for me on first try. Also, did you download the appropriate version for your phone? From what I can see there are 4 versions on sammobile, VMU, SPR, XAS, and BST. I have a Virgin mobile phone, so i got the one with product code VMU.
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Amd4life said:
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Click to expand...
Click to collapse
You may have to boot into recovery and factory reset once ODIN has successfully flashed. Should boot after that.
Sent from my SM-G900P using XDA-Developers mobile app
Hello, I'm getting crazy and I don't know what to do anymore.
I have been using the Oreo Rom in the last few days and I wanted to go back to stock firmware using Odin.
I downloaded the last firmware available for my country (ITV) and installed Odin.
The app kept failing when trying to flash and I wasn't able to install the firmware. I tried by flashing only the AP file and I was able to delete TWRP and install the stock recovery. The phone booted up but it acted strange (the touch screen was unresponsive). So I tried to align the CSC using Odin but it kept failing when trying to flash the BL.
I then flashed all files (AP, CP and CSC) without the bootloader and now I have no signal.
Please help me! How do I restore my baseband?
You cannot flash an older baseband through Odin than the one you're on at the moment, at least that's what I was fighting with a few days ago. Check that you're really flashing the latest stock FW and that its baseband is the same as the last one that worked or newer.
Hey guys! I have a problem. I have flashed on my Galaxy S7 (Exynos version) the galaxy Note Fan Edition Port rom a couple of weeks ago, but now I flashed the latest stock firmware from Sammobile via odin and it always fails at the bootloader. I don't know why? I searched for many hours for a solution, but nothing works.... I hope somebody could help me
Here is the link for the note fan edition rom: https://forum.xda-developers.com/s7...-galaxy-note-fan-edition-port-vol1-0-t3633626
OEM unlock on?
Could also be that the latest bootloader prevents rolling back, so if you're trying to go from a newer bootloader to an older one it won't let you. You can probably just exclude the BL file and be fine.
Is that Fan Edition ROM you flashed not a S7 Edge rom made to work on the S7..! Maybe your phone shows up as a G935 now?
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
daymonfeyenord said:
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
Click to expand...
Click to collapse
Samething happened to me. I did the same thing u did but nothing worked.
Can someone plz help us to get odin download work again.
you should go for latest rom. download from here: https://samsung-firmware.org/model/SM-G930F/region/BTU/
You will be satisfy with this.
Hi! Same error but different situation.
I was on the latest firmware 8.0 ITV, I wanted to downgrade to nougat, so I downloaded the first 7.0 firmware BTU (the one that was the best for my S7).
I opened all the firmware files on odin 3.13.1 and I started the procedure but at a certain point everything stopped, on odin the message "failed" appeared and on the phone the message "sw rev check fail (bootloader) device 2 binary 1".
I tried with a different version of odin but the message remains the same, I also tried without flashing the BL file but nothing ... In the end I had to flash again the latest firmware oreo ITV and no errors appeared, but I find myself at the starting point
specific that my S7 has never had modding operations, the knox counter is perfectly at 0x0, I have always used only original firmware and never had problems with odin.
How can I downgrade without having in that error?
Hi just flash this version of latest nougat G930FXXS2DRDI, this is binary 2 firmware (XEO)
I bought my s10e directly from samsung which is XAA firmware
I used modded Odin to flash ATT firmware to see if it would be any better but then decided to go back to XAA firmware
I downloaded the XAA firmware and I am flashing it but no matter what it still shows me having ATT/ATT/XAA when it should be XAA/XAA/XAA
Any Ideas?
zentg said:
I bought my s10e directly from samsung which is XAA firmware
I used modded Odin to flash ATT firmware to see if it would be any better but then decided to go back to XAA firmware
I downloaded the XAA firmware and I am flashing it but no matter what it still shows me having ATT/ATT/XAA when it should be XAA/XAA/XAA
Any Ideas?
Click to expand...
Click to collapse
Look under the Options tab in your modded Odin. Does it show Auto Reboot and F. Reset Time checkboxes as checked? If so, try flashing again with those UNchecked.
Hello everyone! Today I unbranded my s22 ultra by flashing using patched odin, latest firmware for SM-S908U1, to use it in Italy with Vodafone carrier.
Everything went fine except that for some reason, 5G is not working nor 4G+.
I tried then to get back to stock ATT firmware but failed in every attempt. What I tried is:
- Flashing ATT firmware with Patched odin
-Flashing ATT firmware with patched odin 3.14.4
- Flashing ATT firmware with normal odin
-Flashing ATT firmware with normal odin then perform a factory reset after the setup
I always flashed the full package, CSC, Userdata included.
Every time that the system booted up I ended up with standard unbranded firmware. No, ATT customization and obviously no 5G.
Can anyone tell me how to get back to stock ATT firmware ? I totally ran out of ideas...
Usually going between U and U1 requires a factory reset
butchieboy said:
Usually going between U and U1 requires a factory reset
Click to expand...
Click to collapse
The thing is, the phone was always factory resetted as I flashed CSC and useradata every time. Still I tried to flash ATT firmware with normal official odin, then skip setup and factory resetting. Didn't work.
Maybe I should try doing it with patched odin?
Did you try the AT&T U firmware or the U1 firmware with an AT&T CSC? As far as I know, you'd have to flash any U firmware for your model, such as T-Mobile, then upon inserting the AT&T SIM it will revert to AT&T firmware. Yes, cross flashing requires patched ODIN.
The U1 firmware is unbranded and will not fully activate on AT&T or Verizon UNLESS the SIM card is already activated provisioned for 5G. Do NOT use U1 if getting to AT&T stock firmware is your goal.