so i am on the latest firmware BOI1 and i decided to root my sprint s6 the other day to try and do a sim unlock. so i am trying now to return it to stock. i downloaded the correct firmware and used the latest odin3(i believe it is the latest) and the md5 check would do good but when i tried to flash the actual firmware it kept hanging on "setupConnection" and fails
Wiped cache and factory reset from recovery. It has hung at getting pit now the last couple times. I re downloaded the firmware directly from sammobile website this time
looking for the pit file. cant seem to find it. does anyone have a link for the 128 gig sprint version? getting desperate here. don't want to do something im gunna regret lol
i found a tutorial to extract it from your phone but without being able to boot up the phone i can not do this. is there a way to run adb commands on a phone stuck in boot loop? is there anyone who can link a valid g920p pit file?
Related
Ok guys, Could be a simple answer. I currently have an S6 and it is unlocked and currently on German Vodafone. I have attempted to revert it to BTU firmware as I'm in the UK. I followed all the available guides to achieve this via odin but it failed almost immediately. It failed at Hidden.img I think? Anyway the phone then failed to start up and took me straight to an error screen telling me to connect it to smart switch. I then found out how to fix it and managed it so phone up and running again. Is it possible to flash the BTU firmware in the first place?
Thanks
Come on guys, surely there must have been someone out there with the same problem as me and has managed to overcome it?
The answer is:
extract the Firmware with winrar and extract the hidden.img separat to your Desktop. rename it to hidden.img.tar and Flash that again (AP), after that your phone should reboot. if not, go into recovery make a reset. Here is a link in german:
https://www.androidpit.de/forum/670145/samsung-galaxy-s6-s6-update-problem-hidden-img-fail
That's how I solved the problem with the phone going into error. I need to know if it is possible to flash the firmware BTU to my phone?
sinbrad said:
I need to know if it is possible to flash the firmware BTU to my phone?
Click to expand...
Click to collapse
It's 100% possible but check first if the rar file is not corrupted.
I had problem with corrupted files failed in odin.
Ok, I completed yet another download of the firmware for BTU but once again the flash failed. I had to carry out flash with hidden.img.tar in order to restore phone. I don't understand why this is happening? Any ideas?
Hello everyone, I need some help here.
I downloaded the latest from sammobile
G900PVPU3CPG1_G900PSPT3CPG1_G900PVPU3CPG1_HOME.tar .md5
and ODIN v3.12.3
I placed the tar file in the AP slot, installed everything, I receive the final okay and the phone reboots to the stock samsung boot animation, and just sits.
Does anyone have any idea why I can't seem to get past the boot animation?
I can pull the battery and install TWRP, and boot to recover fine, but no matter how long the device will NOT get past the boot animation.
Is it possible that I have a bad download? Can I "downgrade" to PE2, without risk of bricking the device somehow?
thanks
Before clicking Start on odin, did you uncheck everything else (autoreboot, f-reset time, re-partition)? I followed all the steps here for that same firmware. It worked for me on first try. Also, did you download the appropriate version for your phone? From what I can see there are 4 versions on sammobile, VMU, SPR, XAS, and BST. I have a Virgin mobile phone, so i got the one with product code VMU.
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Amd4life said:
welp I went back to old tried and true V3.09 and used PE2, and then let it boot after a LONG TIME. Then I upgraded to PG1 using the update feature in "about device".
Not sure why I could not use the latest PG1 tar file, direct from sammobile.
Curious though, has anyone been able to "downgrade back to lollipop, just in case? Or has Samsung locked it down.
I tried to go back to OA6, and also OK4 and I got a fail (red) in ODIN using both sammobile stock files.
Click to expand...
Click to collapse
You may have to boot into recovery and factory reset once ODIN has successfully flashed. Should boot after that.
Sent from my SM-G900P using XDA-Developers mobile app
Hey guys I need some help please. I am a bit of a noob and was trying to flash the PartCyborgRom using the BootLoopEdition firmware onto my originally G955U (which I had flashed with the G955U1 FW a while ago). And after I flashed the PartCyborgRom AP file through Odin, nothing happened as in the instructions, so I tried resetting the phone and continued to next step (not a good idea on my part) then I loaded the BL file and midway through that Odin gave me a "FAIL!" and the phone is stuck on Download Mode with the following error "SW REV CHECK FAIL : [system]Fused 2 > Binary 1".
I tried going back to stock and flashing all of the stock fw through Odin, but anytime I try to flash anything I get that same error. If I try to reboot the phone normally it tries to upgrade system but looks like nothing is on the phone anymore and is on bootloop. I am not sure what to do, did I **** up really bad and brick my phone?
I can't even get back into Recovery mode! It simply goes on a boot loop where it doesn't find anything in the system.
PS. when I tried to flash the PartCyborgRom my S8+ was on the latest G955U1 fw.
sebisuarez10 said:
Hey guys I need some help please. I am a bit of a noob and was trying to flash the PartCyborgRom using the BootLoopEdition firmware onto my originally G955U (which I had flashed with the G955U1 FW a while ago). And after I flashed the PartCyborgRom AP file through Odin, nothing happened as in the instructions, so I tried resetting the phone and continued to next step (not a good idea on my part) then I loaded the BL file and midway through that Odin gave me a "FAIL!" and the phone is stuck on Download Mode with the following error "SW REV CHECK FAIL : [system]Fused 2 > Binary 1".
I tried going back to stock and flashing all of the stock fw through Odin, but anytime I try to flash anything I get that same error. If I try to reboot the phone normally it tries to upgrade system but looks like nothing is on the phone anymore and is on bootloop. I am not sure what to do, did I **** up really bad and brick my phone?
I can't even get back into Recovery mode! It simply goes on a boot loop where it doesn't find anything in the system.
PS. when I tried to flash the PartCyborgRom my S8+ was on the latest G955U1 fw.
Click to expand...
Click to collapse
You are trying to flash old firmware. It sounds like you are already on firmware with the v2 bootloader and you're trying to flash firmware with rhe v1 bootloader. You need a stock firmware that has a 2 before the last four digits of the firmware name.
Firmware
It should be all well and good flashing stock firmware with the number 2, but I can't find any on XDA and any links outside either fail or try to make you pay because it's over 2GB... If anyone has a copy and space on their google drive, I'd be very grateful for a valid download link!
btuck812 said:
It should be all well and good flashing stock firmware with the number 2, but I can't find any on XDA and any links outside either fail or try to make you pay because it's over 2GB... If anyone has a copy and space on their google drive, I'd be very grateful for a valid download link!
Click to expand...
Click to collapse
Try sammobile.com.
Free download of the latest firmwares but might be a little slow.
Hey guys! I have a problem. I have flashed on my Galaxy S7 (Exynos version) the galaxy Note Fan Edition Port rom a couple of weeks ago, but now I flashed the latest stock firmware from Sammobile via odin and it always fails at the bootloader. I don't know why? I searched for many hours for a solution, but nothing works.... I hope somebody could help me
Here is the link for the note fan edition rom: https://forum.xda-developers.com/s7...-galaxy-note-fan-edition-port-vol1-0-t3633626
OEM unlock on?
Could also be that the latest bootloader prevents rolling back, so if you're trying to go from a newer bootloader to an older one it won't let you. You can probably just exclude the BL file and be fine.
Is that Fan Edition ROM you flashed not a S7 Edge rom made to work on the S7..! Maybe your phone shows up as a G935 now?
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
daymonfeyenord said:
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
Click to expand...
Click to collapse
Samething happened to me. I did the same thing u did but nothing worked.
Can someone plz help us to get odin download work again.
you should go for latest rom. download from here: https://samsung-firmware.org/model/SM-G930F/region/BTU/
You will be satisfy with this.
Hi! Same error but different situation.
I was on the latest firmware 8.0 ITV, I wanted to downgrade to nougat, so I downloaded the first 7.0 firmware BTU (the one that was the best for my S7).
I opened all the firmware files on odin 3.13.1 and I started the procedure but at a certain point everything stopped, on odin the message "failed" appeared and on the phone the message "sw rev check fail (bootloader) device 2 binary 1".
I tried with a different version of odin but the message remains the same, I also tried without flashing the BL file but nothing ... In the end I had to flash again the latest firmware oreo ITV and no errors appeared, but I find myself at the starting point
specific that my S7 has never had modding operations, the knox counter is perfectly at 0x0, I have always used only original firmware and never had problems with odin.
How can I downgrade without having in that error?
Hi just flash this version of latest nougat G930FXXS2DRDI, this is binary 2 firmware (XEO)
So pretty sure the daughter board for usb is bad in my S8, I keep seeing the moisture warning message. Occasionally the message will go away so I try and plug the phone in to which I get an error in Windows that the "Device Descriptor" error, so basically Windows can't tell what it is, even trying to set the drivers myself made no difference. I've also tried in download mode but still get the same error.
I'm currently on PartyCyborg(With SS) so I can't take the official ota like I was going to as it errors out.
Can I flash a stock rom through flashfire or any other methods to get me back to stock and then I'll take the OTA? Just through my brief research I see that alot of people suggest to only flash system.img or AP and to not try and flash bootloader or anything else.
Any suggestions?
Same rom zip file can be flashed via flashfire but if u to go back to stock, then via Odin flash complete latest firmware of your region
I cant odin because the port is bad, Im stuck on PartyCyborg because I cant take an OTA so Im trying to get back to stock which I need to atleast flash my bootloader, I'm running factory binary basically for BL and think that's why it fails to update