Related
I'm a newbie to Android, but I fumbled around with a rooting tool and found a method that works to root two flavours of rko3066, rockchip 3066 devices. As it only roots the device, I see no reason why it should not root any android device, as long as the correct device drivers are used.
USE AT YOUR OWN RISK.
As always with any routine that flashes the eprom of any
cpu, no responsibility is assumed or implied by the author
for any damage that following these instructions may cause
to your phone, tablet, pc or device.
USE AT YOUR OWN RISK.
Rooting u30gt-h
On tablet
1.In U30gt-h Settings->Display open sleep setting.
2.Set sleep to at least ten minutes.
3.In U30gt-h Settings->storage->click on Three dots in upper
right of Settings window title field
4 Select USB computer connection Dropdown menu .
5. Select "Mass Storage" check box
6. <-- backout of storage settings
7. Browse down in Settings and select Security
8.In Security Settings, Select Unknown sources, to give the
Android device permission to install software from sources
not specifically sanctioned by Google and the Android
Consortium. This ensures that the Root utility,
Tp-Sparky-Root.bat will have the necessary access rights to
root the u30gt. If you have any qualms about unsanctioned
files on your tablet or device, you will want to uncheck
this selection after the rooting process is complete.
Whether any of the rooted utilities and programs you will
want to use are sanctioned, is anybody's guess. As always,
be careful when Dling or intalling Any software. I trust
everyone has and uses anti-virus software on all your
devices.
8.scroll down in settings and select {} Developer
Options, if not there, go to (i)about tablet and touch and
hold the Build field and it will bring up developer Options
in the left hand main menu.
9. In Developer Options, select USB debugging.
10. Close settings, and any other open apps.
11. Goto U30gt main android desktop, to ensure good clean
reboots.
12. Using a Known good micro USB to std USB cable,
connect U30gt tablet to PC, you'll get a "connecting to usb"
in notifications area in Android, and a usb icon in the
notification area. You Do Not want to select "Connect to Pc
to Transfer Files", in the notification menu, just plug in the
cable and let it be.
USE AT YOUR OWN RISK.
On PC
1. Search in a web browser for RKBatchTool_u30.zip, the 1.5
version, DL and unzip in the default zip file subdirs.
Rk-batch-tool 1.5 has u30gt drivers, browse the Rk-batch
tool's dir for the u30 drivers for your PC OS. Right click
on the rockusb.inf and chose Install, to install the driver.
2. Verify that you have a rockchip_usb USB Device under disk
drives in Device Manager. Control Panel->System->Hardware->
Device Manager->Disk Drives->rockchip_usb USB Device.
3. Dl TPSarky-VonDroid-Root.rar from
*"mediafire.com/?vd3y1rld2amdxq5"*
as a newbie I cannot post links, so search mediafire.com for TPSarky-VonDroid-Root.rar
4. Unarchive TPSarky-VonDroid-Root.rar, using an archive, or
zip utility: Winzip, alzip, etc. It may require the password
"geekbuying.com" to unrar the archive.
5. Mouse into TPSarky-VonDroid-Root directory created by the
rar file, until you get to TPsparkyRoot.bat and adb.exe
files, a couple of sudirs inside TpSarky unzipped file
directories.
6. Run, double click on, adb.exe first. It opens up a dos
command window, runs a dos executable that launches adb
server and connects to the U30gt. It opens and closes so
fast you won't hardly see it. If you Do Not run adb.exe.
first, Tp-Sparky-Root.bat will not communicate with the
U30gt, and your root will fail.
7. Now run, double click on, Tp-Sparky-Root.bat
Tp-Sparky-Root.bat will Immediately reboot the u30gt.
8. When the u30gt reboots, hit space key as instructed.
Tp-Sparky-Root.bat will reboot the u30gt, again.
9. Press the space key as instructed, again. The command line
will show
uid=0<root> gid=0<root>
if you have a successful root.
10. Press the space key as instructed, again.
The command informs you the U30gt root has been remounted,
there are a couple of errors relating to SuperSU, I presume
SuperSu was Not included in the tpsarky zip file, or is in
the wrong place for the batch file to find it, but you can
DL SuperSU from GooglePlayStore, nhnf. The Utility notifies
you that Tp-Sparky-Root.bat is completing the root.
11. The u30gt will reboot one last time.
12. DL Titanium Backup Root, Rootchecker, or Avast Android to the tablet,
and they will confirm a rooted tablet.
**As this method only Roots the device, and since it worked
on both my u30gt and an Imito-Mx1 mini android, I think it
should work on nearly any RKO3066 droid device.
As always with any routine that flashes the eprom of any
cpu,
USE AT YOUR OWN RISK.
Thanks to the people who initially posted the original root
routine for the IMITO-MX1 on Youtube, and to geekbuying for
this procedure, as well as the files for rooting the IMITO-
MX1 and ultimately the u30gt. A big thanks to Tp-Sarky or
Tp-Sparky, whoever they may be, for writing the batch file
that does all the work. I also want to thank 900Supersport,
kastycube and the good folks at alldocube for their various
flavours of the u30gt firmware and utilities, as well as
flashmyandroid.com
I have tried all flavours of android 4.1 firmware, 900
supersport, kastycube, to the generic cube-tablet.com
versions from 1.07 to the latest greatest build 1.11, and
None of them gives me access to the microsd card. I bought
two of these puppies for Christmas, IPS version, and neither
the original out of the box or my reconfigured one reads
microsd. It is possible that both got bad sd card readers,
but unlikely. As my imito-mx1 miniandroid reads the microsd
cards, as does the adapter in my pc, it is most probably an
U30gt flavour android system software issue. Anybody got any
clues how to resolve microsd issues in android?
works great
533online said:
I'm a newbie to Android, but I fumbled around with a rooting tool and found a method that works to root two flavours of rko3066, rockchip 3066 devices. As it only roots the device, I see no reason why it should not root any android device, as long as the correct device drivers are used.
USE AT YOUR OWN RISK.
As always with any routine that flashes the eprom of any
cpu, no responsibility is assumed or implied by the author
for any damage that following these instructions may cause
to your phone, tablet, pc or device.
USE AT YOUR OWN RISK.
Rooting u30gt-h
On tablet
1.In U30gt-h Settings->Display open sleep setting.
2.Set sleep to at least ten minutes.
3.In U30gt-h Settings->storage->click on Three dots in upper
right of Settings window title field
4 Select USB computer connection Dropdown menu .
5. Select "Mass Storage" check box
6. <-- backout of storage settings
7. Browse down in Settings and select Security
8.In Security Settings, Select Unknown sources, to give the
Android device permission to install software from sources
not specifically sanctioned by Google and the Android
Consortium. This ensures that the Root utility,
Tp-Sparky-Root.bat will have the necessary access rights to
root the u30gt. If you have any qualms about unsanctioned
files on your tablet or device, you will want to uncheck
this selection after the rooting process is complete.
Whether any of the rooted utilities and programs you will
want to use are sanctioned, is anybody's guess. As always,
be careful when Dling or intalling Any software. I trust
everyone has and uses anti-virus software on all your
devices.
8.scroll down in settings and select {} Developer
Options, if not there, go to (i)about tablet and touch and
hold the Build field and it will bring up developer Options
in the left hand main menu.
9. In Developer Options, select USB debugging.
10. Close settings, and any other open apps.
11. Goto U30gt main android desktop, to ensure good clean
reboots.
12. Using a Known good micro USB to std USB cable,
connect U30gt tablet to PC, you'll get a "connecting to usb"
in notifications area in Android, and a usb icon in the
notification area. You Do Not want to select "Connect to Pc
to Transfer Files", in the notification menu, just plug in the
cable and let it be.
USE AT YOUR OWN RISK.
On PC
1. Search in a web browser for RKBatchTool_u30.zip, the 1.5
version, DL and unzip in the default zip file subdirs.
Rk-batch-tool 1.5 has u30gt drivers, browse the Rk-batch
tool's dir for the u30 drivers for your PC OS. Right click
on the rockusb.inf and chose Install, to install the driver.
2. Verify that you have a rockchip_usb USB Device under disk
drives in Device Manager. Control Panel->System->Hardware->
Device Manager->Disk Drives->rockchip_usb USB Device.
3. Dl TPSarky-VonDroid-Root.rar from
*"mediafire.com/?vd3y1rld2amdxq5"*
as a newbie I cannot post links, so search mediafire.com for TPSarky-VonDroid-Root.rar
4. Unarchive TPSarky-VonDroid-Root.rar, using an archive, or
zip utility: Winzip, alzip, etc. It may require the password
"geekbuying.com" to unrar the archive.
5. Mouse into TPSarky-VonDroid-Root directory created by the
rar file, until you get to TPsparkyRoot.bat and adb.exe
files, a couple of sudirs inside TpSarky unzipped file
directories.
6. Run, double click on, adb.exe first. It opens up a dos
command window, runs a dos executable that launches adb
server and connects to the U30gt. It opens and closes so
fast you won't hardly see it. If you Do Not run adb.exe.
first, Tp-Sparky-Root.bat will not communicate with the
U30gt, and your root will fail.
7. Now run, double click on, Tp-Sparky-Root.bat
Tp-Sparky-Root.bat will Immediately reboot the u30gt.
8. When the u30gt reboots, hit space key as instructed.
Tp-Sparky-Root.bat will reboot the u30gt, again.
9. Press the space key as instructed, again. The command line
will show
uid=0<root> gid=0<root>
if you have a successful root.
10. Press the space key as instructed, again.
The command informs you the U30gt root has been remounted,
there are a couple of errors relating to SuperSU, I presume
SuperSu was Not included in the tpsarky zip file, or is in
the wrong place for the batch file to find it, but you can
DL SuperSU from GooglePlayStore, nhnf. The Utility notifies
you that Tp-Sparky-Root.bat is completing the root.
11. The u30gt will reboot one last time.
12. DL Titanium Backup Root, Rootchecker, or Avast Android to the tablet,
and they will confirm a rooted tablet.
**As this method only Roots the device, and since it worked
on both my u30gt and an Imito-Mx1 mini android, I think it
should work on nearly any RKO3066 droid device.
As always with any routine that flashes the eprom of any
cpu,
USE AT YOUR OWN RISK.
Thanks to the people who initially posted the original root
routine for the IMITO-MX1 on Youtube, and to geekbuying for
this procedure, as well as the files for rooting the IMITO-
MX1 and ultimately the u30gt. A big thanks to Tp-Sarky or
Tp-Sparky, whoever they may be, for writing the batch file
that does all the work. I also want to thank 900Supersport,
kastycube and the good folks at alldocube for their various
flavours of the u30gt firmware and utilities, as well as
flashmyandroid.com
I have tried all flavours of android 4.1 firmware, 900
supersport, kastycube, to the generic cube-tablet.com
versions from 1.07 to the latest greatest build 1.11, and
None of them gives me access to the microsd card. I bought
two of these puppies for Christmas, IPS version, and neither
the original out of the box or my reconfigured one reads
microsd. It is possible that both got bad sd card readers,
but unlikely. As my imito-mx1 miniandroid reads the microsd
cards, as does the adapter in my pc, it is most probably an
U30gt flavour android system software issue. Anybody got any
clues how to resolve microsd issues in android?
Click to expand...
Click to collapse
works great full root on sk30sdk android 4.1.1 2013 rockchip tablet follow instructions and all is well
do you have any idea; f this process works on
Next book 7 premium se
s/n: YFG121******* ?
Sent from my Next7P12 using Tapatalk 4 Beta
Just rooted PIPO M9 which is a RK3188 using this method.
Althought I can everything that a rooted device does, including executing the apps and changing syste files, I don't see SU app anywhere?
Is this normal?
cool, I think I'm gonna try this method tonight after work.
I'll let you know how it goes
Hacking my Own Next7P12-GP, PM me if you can help
Thanks .. it works for RK30_ICS :good::good:
Djuganight said:
Just rooted PIPO M9 which is a RK3188 using this method.
Althought I can everything that a rooted device does, including executing the apps and changing syste files, I don't see SU app anywhere?
Is this normal?
Click to expand...
Click to collapse
Yep, but for security reasons it's better to install some su governor, because now every app can have root access without your permission.
http://forum.xda-developers.com/showthread.php?p=43584766#post43584766
Check this for simple 4 steps root for this device. Easy and without any risks and even with an unroot tool.
Hi Guys, I Need Help to Root my Alcatel One Touch Tab 7HD with
Chipset: Rockchip RK3066
Android 4.1.1
Kernel Version: 3.0.8+
Build Number: 100_ASPPH_000
I cannot enter too Stock Android Recovery Mode ;(
I already Install the adb driver, usb driver of this device and Rockchip Driver ;(
I'll try many Rooting Procedures but Opportunetly it doesnt work ;(
The ff. the i will use to ROOT this Alcatel One Touch Tab 7 HD are
Application Status
1. UnlockRoot Failed
2. SuperOneClick v.1.9.1.0 Failed
3. Root_with_Restore_by_Bin4ry_v31 Failed
4. Srsroot Failed
5. Zuodashi Failed
i'll Try also this Method but its doesn't work too ;(
Rooting the rko3066/rockchip 3066 device
http://forum.xda-developers.com/show....php?t=2127573
[GUIDE] Fix ADB USB driver for Rockchip RK3066
http://forum.xda-developers.com/show....php?t=2061063
I hope any can Help me. ;(
Thank you very much, I have just rooted my Cube U18GT-S
Works also on Kiano Core 10.1 Dual 3G...
after installing Samsung Android ADB driver for Win 7. Thank you very much.....:fingers-crossed: :good:
Search in a web browser for RKBatchTool_u30.zip, the 1.5
version, DL and unzip in the default zip file subdirs.
Rk-batch-tool 1.5 has u30gt drivers, browse the Rk-batch
tool's dir for the u30 drivers for your PC OS. Right click
on the rockusb.inf and chose Install, to install the driver.
Click to expand...
Click to collapse
I'm trying to root my Andi-7 tablet with Android 4.1.1 and the RK30sdk.
I searched as instructed and found this zip file.
Extracted the file, found rockusb.inf and right clicked and chose install.
Every time, I get the error message.
Any help?
Thanks
Works on Xelio P717A
You can try this method found here http://forum.xda-developers.com/showthread.php?t=1987280&page=2. It's the method I used on my IdeaUSA CT705 it's just repetative having to keeping pushing the"enter" button as it also states in the thread.
Working on iRulu AX105
Thank you, working on iRulu AX105 Tablet, 10.1"
Permission denied
As ichiyamato said, this method not working for sk3066 device. Scrips are not working because there are no permission to copy necessary files into device.
All scripts gave,
Code:
*---* VonDroid.com N101 II Root Tool based on work by sunnydavid *---*
--- Plug in your device, make sure debugging is enabled in Developer Options
--- This script will now copy files over to your N101 II
failed on '/data/local/tmp' - Permission denied
link failed File exists
I think we should open write permission on device. But i dont know how.
Thanks.
Work on Touchmate TM-MID940
I have successfully root my Touchmate TM-MID940 with TPSarky Android rooting method
Thanks
Confirmed working on an Energy System i8 tablet.
The micro SD card on my device does not stay in properly, so this method was needed.
I had to manually fiddle with adb a little (I had been trying other methods to root), so personally I would change the instructions to explain how to open a command prompt and execute:
adb kill-server
adb start-server
(Check it says starting server)
adb get-state
(check it says device)
then run the batch file
Rooted Cube U30GT-H firmware original v1.11 Rockchip 3066 with Kingo Root. Easy, easy. :good:
rootmaster
ichiyamato said:
Hi Guys, I Need Help to Root my Alcatel One Touch Tab 7HD with
Chipset: Rockchip RK3066
Android 4.1.1
Kernel Version: 3.0.8+
Build Number: 100_ASPPH_000
I cannot enter too Stock Android Recovery Mode ;(
I already Install the adb driver, usb driver of this device and Rockchip Driver ;(
I'll try many Rooting Procedures but Opportunetly it doesnt work ;(
The ff. the i will use to ROOT this Alcatel One Touch Tab 7 HD are
Application Status
1. UnlockRoot Failed
2. SuperOneClick v.1.9.1.0 Failed
3. Root_with_Restore_by_Bin4ry_v31 Failed
4. Srsroot Failed
5. Zuodashi Failed
i'll Try also this Method but its doesn't work too ;(
Rooting the rko3066/rockchip 3066 device
http://forum.xda-developers.com/show....php?t=2127573
[GUIDE] Fix ADB USB driver for Rockchip RK3066
http://forum.xda-developers.com/show....php?t=2061063
I hope any can Help me. ;(
Click to expand...
Click to collapse
I think u should try rootmaster . Search it on google . Its an chieneese app but u shall understand how to use when u will install it . It can root many of the rk3066 devices
As always Any information I give is free and this information is to be used at your own risk I take no responsibility for your device this is just my experience and i hope it helps someone with the same problem i had
I recently bought the Double Power (DOPO) M7088 Jelly Bean 4.1.1 Tablet from Walmart.com After a few days of searching and many failed Attempts I finally found out how to root this device and would like to share it to those having the same problem.
After doing some digging i descover the Dopo tablets are nothing more than a rebranded generic rock ship tablets so after some searching here is what i found.
Things you will Need.
1.Pdanet+ for android installer (just type in pdanet+ in your search engine of choice)
2.Your device and usb cable
3.The free download of unlockrootpro (Just type unlockroot into your search engine of choice
Steps.
1. Download and install Pdanet+
2 Download and install unlockrootpro free Version
a. you must be connected to the internet for the installer to work.
b. the unlockroot pro will download a file to your computer that is in itself a down loader it is safe but it does try to get you to install some 3rd part software. if you click the close button it will give you the option to skip the 3rd party software and install just the unlockroot software. it does this 2 or 3 times just click close and skip each time.
3. Connect your Tablet up to the PC and allow all the drivers to install.
4. Once connected start unlockrootpro once it is ope click the green root button it should detect your device and bring up a box just click the button and it will install the root.
a. Now i noticed after it installed the root and say rebooting device my device would not reboot. I unplugged my device and then plugged it right back in and the device immediately rebooted
5. Once your table has rebooted download root checker or the app of your choice to verify root access.
I hope this helped anyone with a Dopo m7088
I don't know if this method will work for any of the other Double Power Tablets so i honestly cannot answer any questions other than what i have stated but feel free to try it if you cannot find any other method.
If this method does Work for you please post a coment on your steps and what device you used this method on so that you can help the community.
M7088
Well i have found out that there is a way to ROOT the M7088 from walmart with out internet connection
Download Moborobo in order to load drivers for the M7088
Just download the same software as you would for the PIPO S1 Its all over the net now and also this M7088 has an attitude about rooting so you might have to click root a couple time to force it to but it does work quite well the Chinese software ( ZhuoDaShi ) after its done you will get a message window in Chinese just copy and paste that text into Google translator and it will tell you ROOT is good Ha Ha ha have fun
backslashx said:
As always Any information I give is free and this information is to be used at your own risk I take no responsibility for your device this is just my experience and i hope it helps someone with the same problem i had
I recently bought the Double Power (DOPO) M7088 Jelly Bean 4.1.1 Tablet from Walmart.com After a few days of searching and many failed Attempts I finally found out how to root this device and would like to share it to those having the same problem.
After doing some digging i descover the Dopo tablets are nothing more than a rebranded generic rock ship tablets so after some searching here is what i found.
Things you will Need.
1.Pdanet+ for android installer (just type in pdanet+ in your search engine of choice)
2.Your device and usb cable
3.The free download of unlockrootpro (Just type unlockroot into your search engine of choice
Steps.
1. Download and install Pdanet+
2 Download and install unlockrootpro free Version
a. you must be connected to the internet for the installer to work.
b. the unlockroot pro will download a file to your computer that is in itself a down loader it is safe but it does try to get you to install some 3rd part software. if you click the close button it will give you the option to skip the 3rd party software and install just the unlockroot software. it does this 2 or 3 times just click close and skip each time.
3. Connect your Tablet up to the PC and allow all the drivers to install.
4. Once connected start unlockrootpro once it is ope click the green root button it should detect your device and bring up a box just click the button and it will install the root.
a. Now i noticed after it installed the root and say rebooting device my device would not reboot. I unplugged my device and then plugged it right back in and the device immediately rebooted
5. Once your table has rebooted download root checker or the app of your choice to verify root access.
I hope this helped anyone with a Dopo m7088
I don't know if this method will work for any of the other Double Power Tablets so i honestly cannot answer any questions other than what i have stated but feel free to try it if you cannot find any other method.
If this method does Work for you please post a coment on your steps and what device you used this method on so that you can help the community.
Click to expand...
Click to collapse
Firmware
Hey awesome i may have a chance to try that method out on my tablet soon if i am lucky. I was wondering if anyone or the one that commented on my original post. I need a copy of the firmware for this tablet mine crashed after lending it out to a friend i am afraid he tried to modify it and somehow corrupted the system it is stuck on the dopo start up screen. if there is anyone who can provide a clean copy of this or even maybe dump a copy of theirs for me i would greatly appreciate it.
.
zxhwk said:
Well i have found out that there is a way to ROOT the M7088 from walmart with out internet connection
Download Moborobo in order to load drivers for the M7088
Just download the same software as you would for the PIPO S1 Its all over the net now and also this M7088 has an attitude about rooting so you might have to click root a couple time to force it to but it does work quite well the Chinese software ( ZhuoDaShi ) after its done you will get a message window in Chinese just copy and paste that text into Google translator and it will tell you ROOT is good Ha Ha ha have fun
Click to expand...
Click to collapse
hey this is great news and I thank you !!!
I was wondering if the m7088 caan be upgraded to CM10/4.2.2?
thanks
I don't know if you can install any form of CM on it as of yet. I have successfully I believe Dumped a copy of the system and recovery images from my M7088. Unfortunately my last unit was toast but being under warrantee i sent it back and they replaced it. Soon as I had it i researched how to back up the system just in case. I can provide my copy of the dump or show the process i used to do it.
I don't know if the dump I have is what is exactly a proper form of back up or recovery. I also don't know what is needed to mod it for CM but at least this is a start to anyone who would like to try.
If there is anyone who would like to and would like the Files I have dumped or any help I can provide let me know. I would like to see Cm/4.2.2 working on this device.
Easy way to root any Dopo tablet
I am not responsible for anything. Use this at your on risk.
Download and install Exynos abuse .
Then Uninstall and get any kind of root checker to verify root access.
And that's it.
Worked for me with no problems. NOW My Dopo tablet is faster than when I got it out the box. With minor tweaking apps and my 32 gb external SD card as my internal SD card and you can find the thread on how to do this on xda forums. Running games like NFS MW, Modern Combat 2 and 3,Nba Jam for android.To run good games like these I had to get a system app freezer like titanium backup to freeze a few useless apps. So now these games run very smooth and flawlessly.Good luck.
backslashx said:
I don't know if you can install any form of CM on it as of yet. I have successfully I believe Dumped a copy of the system and recovery images from my M7088. Unfortunately my last unit was toast but being under warrantee i sent it back and they replaced it. Soon as I had it i researched how to back up the system just in case. I can provide my copy of the dump or show the process i used to do it.
I don't know if the dump I have is what is exactly a proper form of back up or recovery. I also don't know what is needed to mod it for CM but at least this is a start to anyone who would like to try.
If there is anyone who would like to and would like the Files I have dumped or any help I can provide let me know. I would like to see Cm/4.2.2 working on this device.
Click to expand...
Click to collapse
I ran across this post and was wondering if you have the original system and recovery images, as I rooted my M7088 and lost my backup files
m7088 firmware
I am looking for a copy of the firmware for my m7008 tablet.
I am trying to fix a problem of it not starting up its stuck on the DOPO screen.
I believe I can re flash it but DOPO will not send me the file they want me to send in.
Any help will be appreciated.
DOPO logo screen-freeze
putertim said:
I am looking for a copy of the firmware for my m7008 tablet.
I am trying to fix a problem of it not starting up its stuck on the DOPO screen.
I believe I can re flash it but DOPO will not send me the file they want me to send in.
Any help will be appreciated.
Click to expand...
Click to collapse
Joining just to make a couple comments here. I find that DOPO logo screen-freeze seems to be common problem.
My story - This passed Christmas 2012 my son purchased a DOPO M7088 for his 12y/o son, and talked me into a like purchase for myself this past March 2013. Here in Jul 2013, the grandson is visiting with his tablet. When it became frozen with the DOPO screen one night - we tried everything that we could think of to restore. Even pointing fingers at him... to what surprise the following morning my tablet froze updating apps. When I tried to restart, reboot, reset... even tried Vol+/PwrUP, Vol-/PwrUP... allowing the power in the battery to drain to a point that the screen would not light up or flash. Then recharging - nothing worked passed the DOPO screen-freeze.
For reference - I have worked in electronics/computers from the late 60s - so I’m not a rookie here.
Fortunately – I purchased insurance with Wal-Mart, their tech-line made same suggestions as I had done to restore the system, and came to the conclusion that they will completely return/refund my purchase.
Strange that within 12hrs two like tablets crash following app updates, where one is for a young man (games) and the other for adult (general usage). The finger pointing had three other fingers pointing back at us. So apologies to the grandson.
My son may root/re-install the grandson’s system when they return home – for myself I’m going to upgrade to a better brand (now that I'm missing the tablet).
Hope this helps others to understand that the DOPO screen-freeze problem may not be their personal tablet problem but a product problem (I.E. firmware). /TDos
Need dump of 7088 rom
backslashx said:
I don't know if you can install any form of CM on it as of yet. I have successfully I believe Dumped a copy of the system and recovery images from my M7088. Unfortunately my last unit was toast but being under warrantee i sent it back and they replaced it. Soon as I had it i researched how to back up the system just in case. I can provide my copy of the dump or show the process i used to do it.
I don't know if the dump I have is what is exactly a proper form of back up or recovery. I also don't know what is needed to mod it for CM but at least this is a start to anyone who would like to try.
If there is anyone who would like to and would like the Files I have dumped or any help I can provide let me know. I would like to see Cm/4.2.2 working on this device.
Click to expand...
Click to collapse
Hello, I have damaged the ROM by a an installed app after rooting. I see you said that you made a dump of the ROM. If possible, can I get a copy of these files as this would help me greatly. I have rkAndroidTool.exe working. If it works out, I will post the procedure.
Thanks
Dump and Flash the dopo M7088 and other RK3066 based ROMs
Any information I give is to be used at your own risk. I take no responsibility for any damage to your device.
Here's my story: I installed an application to change the fonts after I rooted. This damaged the system and created a boot loop. At this point I had not worked out a reliable method to backup and restore the ROM and in the process of trying to fix, I wound up damaging the partitions trying to push a file back into the tablet with adb.
So in my research to restore the ROM, I came across several methods to flash the ROM, but very few methods to dump the complete ROM and I wanted to be able to extract and restore the entire ROM. In another thread, I found scripts to dump the rk3066 chipset. I expanded this idea and modified the scripts to flash the ROM as well. Also, I created an installer script to simplify the process.
These scripts need to use the Ubuntu Linux live DVD to dump and flash the ROM. The advantages of Linux is you can directly connect to the tablet in flash mode without the trouble of having to install drivers or the android SDK.
Download the Linux 12.04 LTS version from the following Link http://www.ubuntu.com/download/desktop .
Once downloaded, burn this ISO file to a DVD using your favorite DVD burning software. Most burning software have the ability to decode ISO files. If needed, here is a free ISO burner. Link: http://download.cnet.com/ImgBurn/3000-2646_4-10847481.html?tag=mncol;2
Download the attached zip file and copy the zip to the USB drive. Do not decompress in windows as we need to do this under linux to preserve the stored permissions.
Boot the PC from the DVD drive. This should start the Linux. You may need to press an “F” key during the BIOS boot to bring up a menu to select which drive to boot from. You should see a purple screen. This is Linux loading. Select the “Try Ubuntu” option and the Linux should boot to the Linux Desktop.
OK, we are in Linux!
Insert the USB drive into the PC wait for the Linux to open a window. It may take a little bit as we are running off a DVD and some resources need to load. Be patient and watch the light to finish blinking on the USB stick! Drag the “ExtractRomRK3066.zip” file in the USB window to the desktop.
Write down the name of the USB in the title bar of the window.
For example, My USB window says: F490-4740 in the title bar. Write this down, then move the USB window to the side.
Double click on the zip file, this opens the zip in a window. Drag the “ExtractRomRK3066“ folder in the zip window to the desktop. When the copy is finished, close the zip window.
Click on the “Dash Home” icon on the top left of the desktop, Type “Terminal” in the search box and select the terminal application icon.
In the Terminal Window type exactly as shown while observing the caps:
cd ~/Desktop/Ex*
Type the command:
ls -l
You should see a file named “install.sh” along with other commands ending with “.sh”.
Type the line as shown below including the “./”:
./install.sh
The required libraries should install to Linux. Don't worry this is only in memory as we are not installing anything to your hard drive. Make sure everything completed without Errors. If you only see warnings, this is OK!
Let's connect the Tablet to the USB port and put into flash mode. With the Tablet power off and the all cables removed, hold the Vol– button and plug in the USB cable. Continue to hold the Vol- button for 5 seconds. Let go of the Vol- button and connect the power cable. We should now be in flash mode.
We can test if we connected to flash mode by typing:
lsusb
You should see a list of USB devices. Within this list you should see a entry that has the ID:
ID: 2207:300a
If you see the ID, great we are connected to the tablet. If not, make sure the tablet is off and do the above Tablet procedure again.
OK we are connected!
Dumping the ROM
Type the following command replacing the “F490-4740” with your USB name we wrote down earlier from the USB title bar and follow the prompts. This will start the dump of the tablet:
sudo ./dumpall.sh /media/F490-4740/output
YAY! We are dumping the ROM!
Now we wait for “done...”, hopefully without any errors.
Double click on the “ output” folder in the USB drive window.
Verify that we have “backup.img”, “boot.img”, “kernel.img”, “misc.img”, “parm.img”, “recovery.img”, “system.img and userdata.img.
Now in the left panel of the USB window. Click on the ^ icon next to the USB drive description. This will unmount the USB drive for removal.
We are done!
Flashing the ROM
To flash a file you will notice other commands with the extension “.sh”. You may use any of these commands to restore all or part of the ROM.
For example:
To flash the below stock rom, extract the zip file to a USB drive and type the command changing the “F490-4740” to the name of your USB drive:
sudo ./flashall-user.sh /media/F490-4740/dopo7088stock
To flash a backup of all files including the userdata.img, type the command changing the “F490-4740” to the name of your USB drive:
sudo ./flashall.sh /media/F490-4740/dopo7088stock
To flash just the recovery, do the same as above only with the command:
sudo ./flashrecovery.sh /media/F490-4740/dopo7088stock
To flash just the system, do the same as above only with the command:
sudo ./flashsystem.sh /media/F490-4740/dopo7088stock
The valid command are:
sudo ./dump?.sh
or
sudo ./flash?.sh
replacing ? With:
all, all-user, backup, boot. cache, kernel, kpanic, misc, recovery, system, user, userdata
----------------------
Hope this helps somebody create a full backup.
Thanks.
UPDATE: I got another dopo m7088 tablet, created a backup using the above method and flashed my bricked m7088 tablet. Everything works again. YAY!
Below is the dumped stock rom for the dopo m7088. Hopes this help's sombody unbrick their tablet.
Extract the dopo7088stk.zip to a USB drive and follow the above instructions.
Thanks
Stock Rom Link: https://docs.google.com/file/d/0B8YnQA1FX-_yUU1ERXh1TjNUbnc/edit?usp=sharing
Thanks
I now have my M7088 again. Thank you . Your instructions where 100% right on.
Partition table not correct in stock M7088 ROM!
After I created the dump of the M7088 ROM and I flashed my tablet, I was looking at the parameter file and realized it was wrong from the factory!
There are several problems that may be the reason some people (including me) has had their devices brick for no apparent reason.
Below is the factory partition table. There is a blank space at address 118000 for a length of 11E000 bytes, this is not a problem. However, the "userdata" partition overruns the "kpanic" and "system" partition as well as the "system" partition overruns the "user" partition. This could lead to data corruption in the partitions.
Factory Partition Table: (length @ start)
[email protected](misc), (2000 + 2000 = 4000)
[email protected](kernel), (4000 + 4000 = 8000)
[email protected](boot), (8000 + 8000 = 10000)
[email protected](recovery), (10000 + 8000 = 18000)
[email protected](backup), (18000 + C0000 = D8000)
[email protected](cache), (D8000 + 40000 = 118000)
(ERROR - Space between 118000 and 236000)
[email protected](userdata), (236000 + 400000 = 636000)
(ERROR - 636000 is past 618000 and 61A000)
0x000020[email protected](kpanic), (618000 + 2000 = 61A000)
[email protected](system), (61A000 + 200000 = 81A000)
(ERROR - 81A000 is past 73A000)
[email protected](user) (73A000 -> end)
It looks like someone made a mistake and/or adjusted the partition sizes and never finished the job!
The only way to fix this is to correct the partition table and re-flash the entire device.
Before I corrected the "parameter" and "parm.img" file, I examined other RK3066 roms as well as the dopo TD1010. The TD1010 has a shorter "system" partition so the fixed partition table below is the same as the TD1010 all the way through the "kpanic" partition.
Fixed Partition Table: (length @ start)
[email protected](misc), (2000 + 2000 = 4000)
[email protected](kernel), (4000 + 4000 = 8000)
[email protected](boot), (8000 + 8000 = 10000)
[email protected](recovery), (10000 + 8000 = 18000)
[email protected](backup), (18000 + C0000 = D8000)
[email protected](cache), (D8000 + 40000 = 118000)
[email protected](userdata), (118000 + 400000 = 518000)
[email protected](kpanic), (518000 + 2000 = 51A000)
[email protected](system), (51A000 + 200000 = 71A000)
[email protected](user) (71A000 -> end)
I corrected the stock firmware and repacked it as dopo7088stkfixed.zip. This file can be flashed with the procedure in the earlier post, replacing the original zip package with this one.
Fixed Firmware Link: https://docs.google.com/file/d/0B8YnQA1FX-_yRmhIN1dCT245R2c/edit?usp=sharing
Also, remember to do a full wipe after flashing.
Thanks
---------- Post added at 02:12 PM ---------- Previous post was at 01:51 PM ----------
putertim said:
I now have my M7088 again. Thank you . Your instructions where 100% right on.
Click to expand...
Click to collapse
No problem. Check my above post. I discovered the partition tables from the factory are wrong which could cause data corruption.
Thanks
i keep on getting this error when trying to reflash i follow the steps i dont know what im doing wrong? ..please help.
[can't open input file 'parm.img': No such file or directory
Error: mkkrnlimg could not decode partition table
[email protected]:~/Desktop/ExtractRomRK3066$
bird56duce said:
i keep on getting this error when trying to reflash i follow the steps i dont know what im doing wrong? ..please help.
[can't open input file 'parm.img': No such file or directory
Error: mkkrnlimg could not decode partition table
[email protected]:~/Desktop/ExtractRomRK3066$
Click to expand...
Click to collapse
Sounds like the path to the files is incorrect.
The command "sudo ./flashall-user.sh /media/F490-4740/dopo7088stock" will look for the media in the path specified.
The "sudo ./flashall-user.sh" is the command part of the line.
The path can be interpreted as "/media/" + "The USB Drive Name in the title bar of the window" + "/" + "The Folder the media is in that has the parm.img file."
For example: if you have the files that includes the parm.img file on the USB drive in a folder called "ROM" and the name of the USB drive at the top of the USB drive window is "ABCD-0123", the line would look like:
sudo ./flashall-user.sh /media/ABCD-0123/ROM
Hope this helps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
opening awsfai
mikeopi said:
Sounds like the path to the files is incorrect.
The command "sudo ./flashall-user.sh /media/F490-4740/dopo7088stock" will look for the media in the path specified.
The "sudo ./flashall-user.sh" is the command part of the line.
The path can be interpreted as "/media/" + "The USB Drive Name in the title bar of the window" + "/" + "The Folder the media is in that has the parm.img file."
For example: if you have the files that includes the parm.img file on the USB drive in a folder called "ROM" and the name of the USB drive at the top of the USB drive window is "ABCD-0123", the line would look like:
sudo ./flashall-user.sh /media/ABCD-0123/ROM
Hope this helps.
Click to expand...
Click to collapse
:good: I figured it out. thank you. I have another question what are the proper steps after flashing a new rom? I followed all your steps from dumping to flashing the new fixed rom, but cant get the device out of that stupid DOPO screen. After flashing with the new rom do you unplug it and reboot? BTW its not rooted. thanks
bird56duce said:
:good: I figured it out. thank you. I have another question what are the proper steps after flashing a new rom? I followed all your steps from dumping to flashing the new fixed rom, but cant get the device out of that stupid DOPO screen. After flashing with the new rom do you unplug it and reboot? BTW its not rooted. thanks
Click to expand...
Click to collapse
Hold the power key for about 15 seconds to force a shut down.
After shutting down, do you still get a stuck dopo screen?
If so, try a different USB port on the PC and try the procedure again. Sometime it does not seem to always take.
Make sure you are using the command sudo ./flashall.sh with the fixed rom. For the fixed rom to work, you have to flash all partitions. Then do a factory reset once it is fully booted.
Also, do a wipe. With the power off, hold the vol- and power key. This should bring you into the recovery menu. Do a wipe cache & wipe data/factory reset & reboot.
I have tried your technique at least 4 times and it doesn't work. I can't get through the Linux part with the downloaded file that you offer in your post. I get errors and I cannot go any further.
Either the file that you posted is not good or there is something else going on here. Any idea's? I have also seen other posts saying they cannot get past the errors.
mvalent000 said:
I have tried your technique at least 4 times and it doesn't work. I can't get through the Linux part with the downloaded file that you offer in your post. I get errors and I cannot go any further.
Either the file that you posted is not good or there is something else going on here. Any idea's? I have also seen other posts saying they cannot get past the errors.
Click to expand...
Click to collapse
Please give me more info on what the errors are and what command are they after?
mikeopi said:
Any information I give is to be used at your own risk. I take no responsibility for any damage to your device.
Here's my story: I installed an application to change the fonts after I rooted. This damaged the system and created a boot loop. At this point I had not worked out a reliable method to backup and restore the ROM and in the process of trying to fix, I wound up damaging the partitions trying to push a file back into the tablet with adb.
So in my research to restore the ROM, I came across several methods to flash the ROM, but very few methods to dump the complete ROM and I wanted to be able to extract and restore the entire ROM. In another thread, I found scripts to dump the rk3066 chipset. I expanded this idea and modified the scripts to flash the ROM as well. Also, I created an installer script to simplify the process.
These scripts need to use the Ubuntu Linux live DVD to dump and flash the ROM. The advantages of Linux is you can directly connect to the tablet in flash mode without the trouble of having to install drivers or the android SDK.
Download the Linux 12.04 LTS version from the following Link .
Once downloaded, burn this ISO file to a DVD using your favorite DVD burning software. Most burning software have the ability to decode ISO files. If needed, here is a free ISO burner. Link:
Download the attached zip file and copy the zip to the USB drive. Do not decompress in windows as we need to do this under linux to preserve the stored permissions.
Boot the PC from the DVD drive. This should start the Linux. You may need to press an “F” key during the BIOS boot to bring up a menu to select which drive to boot from. You should see a purple screen. This is Linux loading. Select the “Try Ubuntu” option and the Linux should boot to the Linux Desktop.
OK, we are in Linux!
Insert the USB drive into the PC wait for the Linux to open a window. It may take a little bit as we are running off a DVD and some resources need to load. Be patient and watch the light to finish blinking on the USB stick! Drag the “ExtractRomRK3066.zip” file in the USB window to the desktop.
Write down the name of the USB in the title bar of the window.
For example, My USB window says: F490-4740 in the title bar. Write this down, then move the USB window to the side.
Double click on the zip file, this opens the zip in a window. Drag the “ExtractRomRK3066“ folder in the zip window to the desktop. When the copy is finished, close the zip window.
Click on the “Dash Home” icon on the top left of the desktop, Type “Terminal” in the search box and select the terminal application icon.
In the Terminal Window type exactly as shown while observing the caps:
cd ~/Desktop/Ex*
Type the command:
ls -l
You should see a file named “install.sh” along with other commands ending with “.sh”.
Type the line as shown below including the “./”:
./install.sh
The required libraries should install to Linux. Don't worry this is only in memory as we are not installing anything to your hard drive. Make sure everything completed without Errors. If you only see warnings, this is OK!
Let's connect the Tablet to the USB port and put into flash mode. With the Tablet power off and the all cables removed, hold the Vol– button and plug in the USB cable. Continue to hold the Vol- button for 5 seconds. Let go of the Vol- button and connect the power cable. We should now be in flash mode.
We can test if we connected to flash mode by typing:
lsusb
You should see a list of USB devices. Within this list you should see a entry that has the ID:
ID: 2207:300a
If you see the ID, great we are connected to the tablet. If not, make sure the tablet is off and do the above Tablet procedure again.
OK we are connected!
Dumping the ROM
Type the following command replacing the “F490-4740” with your USB name we wrote down earlier from the USB title bar and follow the prompts. This will start the dump of the tablet:
sudo ./dumpall.sh /media/F490-4740/output
YAY! We are dumping the ROM!
Now we wait for “done...”, hopefully without any errors.
Double click on the “ output” folder in the USB drive window.
Verify that we have “backup.img”, “boot.img”, “kernel.img”, “misc.img”, “parm.img”, “recovery.img”, “system.img and userdata.img.
Now in the left panel of the USB window. Click on the ^ icon next to the USB drive description. This will unmount the USB drive for removal.
We are done!
Flashing the ROM
To flash a file you will notice other commands with the extension “.sh”. You may use any of these commands to restore all or part of the ROM.
For example:
To flash the below stock rom, extract the zip file to a USB drive and type the command changing the “F490-4740” to the name of your USB drive:
sudo ./flashall-user.sh /media/F490-4740/dopo7088stock
To flash a backup of all files including the userdata.img, type the command changing the “F490-4740” to the name of your USB drive:
sudo ./flashall.sh /media/F490-4740/dopo7088stock
To flash just the recovery, do the same as above only with the command:
sudo ./flashrecovery.sh /media/F490-4740/dopo7088stock
To flash just the system, do the same as above only with the command:
sudo ./flashsystem.sh /media/F490-4740/dopo7088stock
The valid command are:
sudo ./dump?.sh
or
sudo ./flash?.sh
replacing ? With:
all, all-user, backup, boot. cache, kernel, kpanic, misc, recovery, system, user, userdata
----------------------
Hope this helps somebody create a full backup.
Thanks.
UPDATE: I got another dopo m7088 tablet, created a backup using the above method and flashed my bricked m7088 tablet. Everything works again. YAY!
Below is the dumped stock rom for the dopo m7088. Hopes this help's sombody unbrick their tablet.
Extract the dopo7088stk.zip to a USB drive and follow the above instructions.
Thanks
Stock Rom Link:
Click to expand...
Click to collapse
I have tried this today about 8 times today. 4 with each folder you supplied in every usb port on my computer. I could do it all the way down to the dumping. I couldn't get any of the flashing working and my m7088 tablet is still stuck on the dopo screen. Please help as I would like to have this tablet working for my way home in a week.
I have Linux as a second os on my laptop so the first part was easy.
Thanks for your help so far. Good info
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Not rebooting automatically after fastboot continue command
sevenr33 said:
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Click to expand...
Click to collapse
Hi, I've followed the instructions you gave and now I'm stucked at the part which it wouldn't reboot by itself after i typed the "fastboot command".
1) Before I've had chance to charge my phone, it ran out of battery and fastboot mode does not charge the phone. I've also tried to flash the recovery image in fastboot mode, but i got Err:0x2017, what is this error about?
2) And the GUI should run in location bin files as my fastboot driver, not the 0KB fastboot in default location.
2) Do all these steps require unlocking bootloader? I don't think I've unlocked, all I did was just root the phone.
Help
Hi
I have a rooted Huawei Ascend Mate but I installed the wrong TWRP recovery a few days ago. My phone keeps booting and I can't use my recovery, because it is a touch version but it doesn't respond to my touch. So, I don't know if I can flash my stock rom or another recovery...
Can I use this tutorial to fix my phone or can you please make one for the Huawei Ascend Mate?
kind regards
OK so I am trying the new root method and was able to push all files to my device. The device is recognized and can start when booted into the system. However, when I put my device into download mode and checked to see what port the device was on I got an error message: ">reg query HKLM\hardware\devicemap\SERIALCOMM 'reg' is not recognized as an internal or external command, operable program or batch file." I then went to the original command prompt and punched in "adb.exe devices" and had no results. I went to my Device Manager and discovered that I had "Error 10: Device Could Not Start". I uninstalled and re installed the drivers, rebooted my phone into download mode, double checked that USB Debugging was active and that the phone was MTP data transfer. Manually reinstalled drivers and nothing seems to fix the issue.....I appreciate any help that is given
EDIT: I am trying to root 20F (Lollipop)
did you resolve the issue???
Not sure if this will work or not... But I've had some luck with the old LG drivers. Uninstall your current driver and give it a shot... http://www.multiupload.nl/XEY2YR3L0I Not sure if that link works. May have to find. Lg mobile driver 3.8.1. Will upload it myself if I ever get around to it..
Hello. Has anyone rooted the Ulefone Power 6 yet? Im looking to have TWRP installed onto my new Power 6. My goal is to figure out a way to add user profiles, as it currently does not have them activated. I read online that you could edit the .prop to have any android activate the user profiles, but i cannot do this without my phone being rooted. Thanks in advance.
Start Here
Dvalin21 said:
Start Here
Click to expand...
Click to collapse
Sorry, This is for the original Ulefone Power, not the Power 6. Different phones. The instructions didn't lead me to anything useful. I have since update my phone to the latest firmware via the stock update app. I still haven't found a successful way to root the Power 6. There is this thread (https://www.getdroidtips.com/root-ulefone-power-6/), but the ADB commands to not work, and does not fastboot my phone to install the patched image. But either way, the instructions do not include a TWRP, so Im back to square one. HELP!
How to root Ulefone Power 6 (Build Power_6_SF1_V07) Updated 9/22/2019
OK. It was tough, but I finally found a way to root the Ulefone Power 6. I still haven't figured out a way to install TWRP, but that's because i have to build a custom recovery, and that's too advanced for me. So, anyone is welcomed to help out with building a custom recovery for TWRP. As for the root, This is what you will need:
Pre-Requirements:
Device battery charged up to 50%.
Developer Options enabled with OEM Unlocking and USB Debugging enabled
Remember to take a full backup of device data (Internal Storage, SMS), it will get formatted.
A Windows or Mac PC/Laptop is necessary to flash Magisk
A USB cable to connect your device with your PC
Download Links:
Download Minimal ADB Fastboot 1.4.3 (Portable). Extract it to your desktop.
It's best to give administrator privileges to the tools before you use them. To give them admin privileges:
Right click on adb.exe and select "Properties" at the bottom of the menu. Click on the "Compatability" Tab and check the "Run this program as an Administrator" box. Click on the "Apply" button and then the "OK" button to close the properties window.
Repeat the same process for the "cmd-here.exe" and the "fastboot.exe" files.
Ulefone USB Drivers. Extract it to your desktop and make sure you install the drivers.
MTK USB Drivers. Extract it to your desktop and make sure you install the drivers.
Latest Ulefone Power 6 Stock ROM. Or you could make a back up yourself. (latest rom as of 2/25/20 is GQ3081SF1_M860B1_Ulefone_20190921_V07(Non-EU) ).Extract it to your desktop.
MTK SP Multi Port Download Tool. This will be used to flash the most recent Ulefone rom on your device. Extract it to your desktop.
Download Magisk Manager
After downloading the Stock ROM (will be a .ZIP file), extract it to your PC.
Connect your device via USB cable
Find the "boot.img" file inside the Stock Rom folder you just extracted and copy only the "boot.img" file to your devices storage.
Copy Magisk Manager.apk to your devices storage
Using your device, install Magisk Manager
Open the Magisk Manager on your device.
Select "Install" from the first option next to "Magisk is not installed" and again select install.
Now, tap on "Select and Patch a File".
Go to your devices storage where you have copied the "boot.img" file earlier and select it.
Magisk will start patching the boot image.
Once the boot image is patched, Magisk will save the image on your "Download" folder located on your devices storage.
Locate the patched image (magisk_patched.img) and copy the "magisk_patched.img" to your PC. Make sure the patched image (magisk_patched.img) is inside the same folder as the extracted ADB and Fastboot tool folder on your desktop.
Open/run MTK SP Multi Port Download Tool
Click on File from the Menu located at the top right and select "Open Download Agent File"
Locate and select "MTK_ALLInOne_DA.bin", located in the same folder as the MTK SP Multi Port Download Tool folder.
Press the "Open buton" to select the file and close the window.
Now, click on the "Scatter File" button located at the top left.
Locate and select the XXXXXXXX_scatter.txt file located inside the extracted Ulefone Power 6 Stock Rom folder.
Press the "Open buton" to select the file and close the window.
Now, tick the "BootRom+PreLoader COM Sel All" check box located under the "scatter file" button.
Now, Click on the "Scan" button located at the bottom right.
Select Yes from the pop up window
Now, power off you device and disconnect your device from your PC by removing the USB cable from your device.
Now, reconnect the USB cable to your device while it is powered off.
MTK SP Multi Port Download Tool should detect your device and a green bar should appear confirming the connection with the words "Scan Success!" to the left of the green bar.
Press the "Stop all" button located at the bottom right
Disconnect and reconnect your device from your PC
Uncheck the "BootRom+PreLoader COM Sel All" box and check only the line with the green bar.
Click on the tiny "Start" button located to the right of the green bar.
You can confirm the flash was successful when the words "PASS" is visible to the right of the tiny "Start" & "Stop" buttons
Once the flashing is complete, you can close MTK SP Multi Port Download Tool and power on your device.
Configure your device to get to the home screen (skipping as many options as you can. You will have to format one more time) and enable Developer Options, OEM Unlocking and USB Debugging again.
Make sure your device is connected to your PC.
Now, you need to open up a command window (cmd window) inside the Minimal ADB Fastboot 1.4.3 (Portable) folder. To do this, open the "cmd-here.exe" file.
Next, enter the following command in the cmd window:
adb devices
(this command will confirm your device is connected to your PC via ADB )
Your device will show a pop up window asking for permission to connect via ADB. Click on the "Always Trust This Device" and Accept the connection
If successful, you should see the word "Device" to the right of your devices name on the list that the cmd window created.
Next, enter the following command:
adb reboot-bootloader
(This command will boot your device into fastboot/bootloader mode. It will turn off and the device will have a black lit screen)
Check that your device is connected to your pc by entering the following command:
fastboot devices
(this command will confirm your device is connected to your PC via fastboot/bootloader mode ) If successful, you should see the word "Device" to the right of your devices name on the list that the cmd window created.
Next, enter the following command:
fastboot flashing unlock
(if nothing happens, press the Volume up+ on your phone to start the unlocking of the bootloader)
(this will unlock your bootloader)
Next, enter the following command:
fastboot getvar unlocked
(this will confirm you have unlocked your bootloader. It will say "unlocked: yes")
Next, enter the following command:
fastboot flash boot magisk_patched.img
(This will replace your stock image with the patched image you created using Magisk Manager)
Next, enter the following command to reboot your phone:
fastboot reboot
Install magisk manager using your file manager. Make sure to follow directions when it asks you to give special permissions to install.
Open Magisk Manager and click on "OK" when it starts up and asks you for "additional setup".
Congratulations! Your device is rooted.
Extra notes:
If you come across a red watermark with the Chinese words and "Tee Keys" and/or "Google Keys" on the top right of your devices screen, this is how you fix it.
make sure your device is turned on and connected to your PC.
Open "cmd-here.exe" located in the Minimal ADB Fastboot 1.4.3 (Portable) folder.
Next, enter the following command:
adb shell pm uninstall -k --user 0 com.mediatek.factorymode
(This command will not do anything at the moment, but will remove the watermark after you reboot your device)
Next, enter the following command to reboot your device:
adb reboot
The watermark should be removed when your device restarts again.
ENJOY!
19Henry83 said:
OK. It was tough, but I finally found a way to root the Ulefone Power 6. I still haven't figured out a way to install TWRP, but that's because i have to build a custom recovery, and that's too advanced for me. So, anyone is welcomed to help out with building a custom recovery for TWRP. As for the root, This is what you will need:
. . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . .
ENJOY!
Click to expand...
Click to collapse
Thanks a heap for all these instructions, would not have been able to do this without them.
Just a few extra pieces of information for anyone else caryring out the above steps:
- If you your stock ROM doesn't have a file manager in order to open/execute the MagiskManager APK file then using Chrome to download the APK file will allow you to execute it.
- in the SP Multi Port Tool, after checking the line with the green bar and clicking start you'll notice the time in seconds counting next to the start button. At this point you may need to unplug your USB cable and replug it in order for the SP Multi Port Tool to detect the devices and actually start properly
- If the SP Multi Port Tool requires a checksum.ini file you can follow the instructions on the hovatek site (Google 'checksum.ini generatemediatek hovatek' I'm a new user so can't post links):
Note there is a download link for the CheckSum_Gen.zip file which will require you to register for an account on the hovatek website. You can create a junk/throw away account with a fake email as it doesn't require email confirmation. Also all of the files inside the CheckSum_Gen.zip folder need to be placed inside of the stock ROM folder where the scatter file is located.
- The watermark can only be removed after the MagiskManager carries out its additional setup and after root access is complete.
Still hoping to find a compatible TWRP recovery. If anyone builds one please let us know!
Hi, 19Henry83
I did try your method and it works great. I rooted my Power 6. The thing is I did this in hope to fix a freezing touchscreen issue. Touch screen frezzes and I need to lock/unlock my phone constantly to fix it. Now I'm convinced this is not a software issue and I will return the phone to the seller. So I wanted to get back to the original firmware. When I do that however there is still that red watermark and my IMEI is deleted. Is there any way to get back to the factory software and not have the red watermark, as I assume it will void my warranty.
I Need help please ,, I need the TWRP Recovery, Tool / Utility for the Ulefone Power 6, I have looked for it in many web pages and I cannot find it, all the ones I find have the same name "3.3.1 Power 6" and not It works for me when I install them, I get the same recovery that I had when I try to enter
jiroscop said:
Hi, 19Henry83
I did try your method and it works great. I rooted my Power 6. The thing is I did this in hope to fix a freezing touchscreen issue. Touch screen frezzes and I need to lock/unlock my phone constantly to fix it. Now I'm convinced this is not a software issue and I will return the phone to the seller. So I wanted to get back to the original firmware. When I do that however there is still that red watermark and my IMEI is deleted. Is there any way to get back to the factory software and not have the red watermark, as I assume it will void my warranty.
Click to expand...
Click to collapse
Hello Jiroscop. I had the same problem and only noticed after i read your post. Now, a couple months later, i managed to use an IMEI changer to insert my IMEI found on my original box where my phone came in. It should have two IMEIs. I don't know if i can explain on this forum. Try researching it on your own and get back to me if you cannot find a way to fix your phone.
NOTE: you will need your original IMEI's, changing the IMEI's with anything other than the original ones will brick your phone.