Database Info

Reset lockscreen security on GoClever Tab r76.2

Hello, I get just today a GoClever Tab r76.2 to reset the forgotten pin from the locksreen. Device was used mainly for Pou and Facebook, so there was no root, no usb debugging, my PC was not set as trusted device, just like from the store with PIN set. Installed system is Android 4.1
Because it took me whole morning and I found a lot of answers that "it cannot be done, you have to factory reset" I want to show you my steps to make this process easier for people in need. This method shouldn't erase any data from your device but always remember to have a backup
It is based on the following tutorial: http://forum.xda-developers.com/showthread.php?t=2601933 , but still it was not enough for me so I want to provide more details.
Step 1.
The very important thing is to install drivers for the device. To make this process the easiest I get my old, good Asus netbook with Windows XP installed. You can install it also on VirtualMachine, it is not very mandatory but my next steps will be based on this configuration.
There is a need for two types of drivers: Rockchip drivers to flash the memory and ADB Drivers.
1.1) Rockchip drivers can be found in the thread linked above, I am providing mirror at the bottom of this thread. Just doubleclick on the exe, accept the risk and install, that's all for now.
1.2 ADB drivers are provided in the second package attached. To install adb drivers go to recovery.
To switch tablet to the Recovery Mode you have to switch it off (not reboot), turn it on, just when the BootScreen will appear tap Vol+ until you will see opened Android Robot with exclamation mark. What's interesting, when you double click Vol+ this time you can switch to Android Recovery menu and factory reset the device
In device manager (Win+R, type: devmgmt.msc and press ENTER) install drivers for Tab r76 device manually, by providing direct location to the .ini file from the folder.
Leave tablet in Recovery.
Step 2.
People from some Russian Android forum prepared package with pre-configured adb for rockchip devices. Just download attachment 2.1, extract it, install, open Command Line and "cd" to directory with adb.exe, very useful.
Step 3.
Now we will root the device and install CWM. Download file from the attachment 3.1, unzip it and run "RK29Update.exe", don't click any button (especially the one called "Erase", it will brick your device), don't change any setting, your tablet will be not found at the moment. This package belongs to the author of the original tutorial.
Step 4.
In command line enter "adb devices" to check if your tablet is visible, you should see something like "0123456789ABCDEF recovery", if yes enter "adb reboot bootloader" and press enter. Tablet will reboot, the screen will remain black, system will install the Rockchip driver, RK29Update.exe will find the device (IF NOT just reboot to recovery again and reboot to bootloader from adb again, driver installation might interrupt this process), press Run button in the application it will flash the device with root patch and CWM, device will reboot to CWM recovery.
Step 5.
Download attachment nr 5.1 (original source: http://forum.xda-developers.com/showthread.php?t=2437946) and put the zip to the SD card (card has to be compatible with the device - most secure solution is having FAT32 filesystem), put it to the tablet, install zip from external source (not sdcard, it's internal memory).
After reboot of the device ("restart system now" option in main page of CWM) your device should welcome you without screen locked by any security possible and your settings should remain untouched.
From now everybody should be able to reset it's PIN in the easy way Have fun
CC: You are allowed to copy this tutorial anywhere, mirror the links also, but please leave a link to the original thread.

Guide: How to reboot your Nexus 5 without power button

Hi everyone, I would like to share my experience regarding two methods that I have used to revive a Nexus 5 whose power button just will not work. Please use this guide if your Nexus 5 dies due to a low battery and you want to boot (start) it without power button. Following methods have been successfully tested on Win 7 and 10. You can use this guide and keep using your Nexus 5 without repairing the power button. There are other guides and posts which can help you attain locking, unlocking of the screen and remapping the hardware buttons such as volume keys to perform as a power button.
Method 1
Step 1: Download adb/fastboot binaries or use Android SDK for adb/fastboot. If downloaded as a zip, extract it in a folder. It is better to download adb/fastboot minimal, as it is small and can be handy.
Step 1a: Download your phone drivers and install them. If it is a zip folder then extract it in a folder for later use.
Step 2: Plug in the micro USB in your phone. Hold both volume keys on the phone and while holding the keys plug the USB cable in to your PC’s/laptop’s USB port. Your phone will reboot in Bootloader mode where you will see START written at the top of your phone screen which is the prompt to start the system but you cannot select it, as your phone’s power button does not work.
Step 3: Open Command Prompt in windows, which is cmd . Navigate to your adb/fastboot folder which you created while extracting the zip or you might be able to use the commands from anywhere in command prompt if you have installed Android SDK.
Step 3a: Commands only work if you installed adb/fastboot correctly or you are in the binaries folder. While in the corresponding folder,
Type: fastboot devices
123456789 fastboot
The command will show devices connected in fastboot mode just like the above example
If your phone does not appear here then go to control panel>device manager search for any unknown device such as unknown device or android device ; Right click on it and choose update drivers. Do not select the auto search for updated drivers. Select browse my computer for driver and then browse to the folder where you had extracted the drivers choose the right folder and windows should install your device as android bootloader interface device.
Once installed properly, you should see your device by typing the above command again. When successful
Type: fastboot reboot
Now your phone should reboot and start normally.
Method 2
Step 1: Download Wug's Nexus Root Toolkit by Wugfresh.
Step 1a: Download your phone drivers and install them. If it is a zip folder then extract it in a folder for later use.
Step 2: Plug in the micro USB in your phone. Hold both volume keys on the phone and while holding the keys plug the USB cable in to your PC’s/laptop’s USB port. Your phone will reboot in Bootloader mode where you will see START written at the top of your phone screen which is the prompt to start the system but you cannot select it, as your phone’s power button does not work.
Step 3: Run Nexus Root Toolkit. Let it complete its initialisation and when done its main window will pop up on your desktop. If your using it for the first time it will ask for your phone model and android version. Input the details appropriately, if you do not know the android version you are running choose any build which is at the end of the list.
Step 3a: The toolkit might ask for any dependency files to be downloaded, which it will download automatically. You might be able to skip it but if you use any build or wish not to download them but it won’t harm if you download them as you might wish to use the toolkit later.
Step 4: After completing the above step. Toolkit will finally be ready to use. From the main window of toolkit click Launch under the Advanced Utilities.
Step 5: Choose Reboot System and your phone will reboot normally.
If Toolkit returns, No adb/fastboot device found then follow the next step.
Additional Step: Go to control panel>device manager search for any unknown device such as unknown device or android device ; Right click on it and choose update drivers. Do not select the auto search for updated drivers. Select browse my computer for driver and then browse to the folder where you had extracted the drivers choose the right folder and windows should install your device as android bootloader interface device.
Once drivers are installed, go to Step 5 and it should work for you.
The above methods have been used on Nexus 5 and might be helpful on other Nexus or completely different devices from other brands
For Mods: I have done my good faith search before making this guide. Please let me know if a similar guide exists or I have posted it in a wrong place.
If it has helped anyone please consider a Thanks. By the way it is my first post.
For downloads, please use search engines and you will be happily served.
No responsibility is taken, whatsoever.

[GUIDE] [SUPPORT] How to root, optimize, and repair Xiaomi Redmi Go.

The One-for-All Guide to rooting, improving, and fixing various errors in Xiaomi Redmi Go!​Hello everyone! This thread that I made is for all people who wants to modify and gain full access, as well as to repair their Xiaomi Redmi Go devices the well-guided way, I've noticed that nobody has made an all-in-one guide for this phone so I decided to do it, this thread will keep on expanding depending on what I will discover about this phone, but for now, here is the thread, i expect that you have at least a little amount of knowledge when it comes to phones such as ADB and Developer Options.
What can we do with Xiaomi Redmi Go:
1. We can root it, and the best root manager for this phone is Magisk, SuperSU is also good, but if you're planning to use your phone for mobile banking, then Magisk is right for you. (Unfortunately this isn't true right now due to ctsProfile being hard to manipulate, Redmi Go supports hardware backed key attestation which means your device will definitely be not certified no matter what you do, so until we get a new method, don't root your phone if you want to use apps like Google Pay
2. TWRP is the current custom recovery available for this phone, it has flaws, but its currently the best out there, so its worth the shot to install it, the thread for it will guide you.
3. No custom kernels, people said that they have managed to install AOSP 9 and GSI on this device and made it boot up, but for me, it's better to wait for the official ROM update, after all, the device is still supported.
Prerequisites:
1. Xiaomi Redmi Go
2. An internet connection, a strong one is recommended if you want to download a ROM.
3. A computer with SDK Platform Tools ready to use, this is required, the link is here: https://developer.android.com/studio/releases/platform-tools
Don't forget to also get its driver! The link is also here: https://developer.android.com/studio/run/win-usb
The drivers are tricky to install but I will guide you on doing it in the easiest way possible, please continue on the thread.
4. SD card, your user data will be erased later, better back your files up, this is a warning.
5. Turning on "OEM unlocking" and USB Debugging in Developer Options, this is also really important!
Table of contents:
1. Unlocking the bootloader (and setting up ADB)
2. Rooting
3. Applying the custom recovery
4. Additional modifications
5. Stock ROM links
6. Bonus Section
WARNING: I am not responsible for anything that happens to your device as you follow my guide, do not blame me if you turned your device into a paperweight, made it explode, made it fly or whatever it may be, you chose to modify this phone and you should be accountable for it, you must know the consequences of what you're doing, try to point your finger at me because of what YOU did and I will laugh at you.
I am ready to assist though, so please feel free to ask some questions!
Let us begin, this will take several minutes, so please be patient and avoid rushing.
1. Unlocking the bootloader.
NOTE: This requires your computer to have SDK Platform Tools extracted to any location as long as its easy to access, and its really complicated to talk about it here, this step doesn't include the method where you request a code from Xiaomi, but I've provided a link for it.
A. First, get your phone up, and open the folder on where the SDK Platform Tools are placed, make sure that your in the directory where you see the .exe files of the SDK, now, hold Shift on the keyboard and click "Open Command Prompt here" and type "adb reboot bootloader", without quotes don't forget! This applies to all the steps that I will provide, don't forget to change the USB connection mode of your phone to PTP for it to be detected by ADB! (Only applies to Windows 8/8.1) Once your phone is asking for an authorization, check "Always allow this computer" then tap allow.
B. Once your device has been booted up into Fastboot or the bootloader, check first if your device is being detected, type "fastboot devices", if yes then proceed, if no, then stop here for now.
1B. If this happens then you may have to check your drivers and see if its installed correctly, once your device can be seen at "adb devices" it should also been seen in "fastboot devices" and when the phone is in adb sideload, if not then you have to reinstall ADB, get the proper drivers and do it again.
C. Now, type "fastboot oem unlock-go", the terminal will warn you that all of your user data will be removed, if you have them backed up then and go ahead and enter the command, if not, then just type "fastboot reboot" and start backing up your files, then do this again.
D. The phone will boot up and say "Erasing", to confirm that your phone has its bootloader unlocked, once it boots up again see if it says "Unlocked" on the bottom part of your screen, if there is then congratulations, it should be unlocked at this point.
1D. https://www.getdroidtips.com/unlock-bootloader-xiaomi-redmi-go/, this one particular link provides you on how to unlock the bootloader by entering a certain code, I believe this is a safer method but requires a bit of time, go here if you're interested.
NOTE: The phone supports the command "fastboot flashing unlock_critical" if you are going to unlock your phone with the normal command (fastboot oem unlock_go/fastboot flashing unlock), consider using this 2nd command too, what it does is that it allows you to also flash partitions you supposedly don't have access to, just be very careful not to flash any wrong file! It will be useful to make the "flash_all.bat" script work that you can find on the fastboot ROM for this device, more below!
Once your bootloader has been unlocked, you can now proceed to the other steps that I provided here, don't forget to enable USB Debugging on your Developer Options.
1.2 Setting up ADB
1. Grab your phone, unlock and open your Developer Options then enable "USB Debugging", then change your connection type to "PTP" if you are using Windows 8/8.1, I am not sure if this is required on 7, but it is not needed on Windows 10.
2. Go to this link: https://developer.android.com/studio/releases/platform-tools and download the .zip file, then extract it to a location that is easy to access, like your desktop.
3. Get the official Google drivers here: https://developer.android.com/studio/run/win-usb download the .zip file as well, and extract it too.
4. Go to the extracted folder of your SDK Platform Tools, and go to the directory where you can see various .exe files such as "adb.exe", now, hold the Shift key then click the Right mouse button, then click "Open command prompt here" If this doesn't work for you, open up CMD with admin rights, then type in cd *the location of your platform tools* say on mine, I will input cd C:\Users\James\Downloads\platform-tools_r31.0.3-windows\platform-tools then enter
5. Open your Device Manager by pressing Windows + R, put "devmgmt.msc" without any quotes then Enter, do not close the Device Manager until you're done with all the steps! And please be fast here too or else ADB will not work, now go to your extracted folder of the Google USB driver, and look for the file "android_winusb.inf", copy the location path of it as you will need the exact location path of the file later, in my case it was "C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\android_winusb.inf".
4A. There are 3 main ADB devices that you have to install, Android ADB Interface, Android Bootloader Interface and Android Composite ADB Interface, so I will divide this into 3 sections, have your Device Manager, and the exact location of the .inf.
NOTE: Turn off the internet connection of your computer, why? Because, if you let Windows install the drivers for you, the drivers may be incorrect and will break things apart, as we will encounter several "Unknown devices" in the Device Manager and we have to update them with the extracted files from Google.
Android ADB Interface
1. Now, make sure that USB Debugging is enabled, now plug in your phone and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
2. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
NOTE: If you plug your phone and there is no "Android" device with exclamation mark, you can proceed to try and see if adb detects your device by typing "adb devices" in the command right now, it should be since this is what I experienced when setting up my device in Windows 10, this step usually applies only if you are using Windows 8/8.1
Android Bootloader Interface
1. To test, go to the command prompt you opened earlier, and type "adb devices", the device should now be detected at this point, when it does, type "adb reboot bootloader".
2. Now, make sure USB Debugging is enabled on the device before booting it into bootloader, now plug in your phone again and let the drivers install WHILE your computer is offline, Go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Bootloader Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
Android Composite ADB Interface
1. Before proceeding, type "fastboot devices", the device should now also be detected on fastboot, now, type "fastboot reboot", and afterwards, enable "USB Debugging" on the Developer Options, then go your command prompt, then type "adb reboot recovery".
2. Now, now plug in your phone again and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Composite ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
2. Applying the recovery/custom recovery
A. Open up your phone and ensure that USB Debugging has been enabled, now, open up your command prompt just like in Step 1 in Unlocking the Bootloader and type "adb reboot bootloader"
B. Next up, type "fastboot flash recovery path/to/recovery.img", substitute the path/to/ with the actual location of your recovery, and please make sure that the name of the image is "recovery.img"! Or else it will not overwrite/update the recovery, you can also put your recovery.img directly within the platform-tools folder so that all you have to type is "fastboot flash recovery recovery.img" then press enter.
C. Once your done, reboot the phone and press Volume Up + Power at the same time, and the recovery will start. (You may want to do this else the recovery will be automatically removed and replaced with the stock one)
1C. For the stock recovery, once you press the combination, the phone will say "No command", at this point, hold your Power button and press Volume up one time to get into recovery.
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282 here is the link of the TWRP recovery, I encourage you to follow the steps mentioned in the post properly.
WARNING: The fix I provided below is now pushed here for 1 certain reason, before you try to root your phone and do everything else, you must decrypt your internal storage first and it is quite easy, first you must get the decrypt.zip linked in this thread (if the .zip cannot be found, I still have a copy of it), go to TWRP and do "format data", not Wipe Data! How so? Once you reboot to TWRP, it will show you the "Wipe" button, tap that, then the "Format Data" button should show up, this will require you to type in "yes" so type it in, then once it is done formatting, go back to the main TWRP screen, tap "Reboot", then "Reboot to Recovery", afterwards you must go to "Install" then proceed to install the "decrypt.zip", after that you can now flash .zip files from your internal storage too, but beware that you must do this every time you update your device!
3. Rooting your phone
A. To get started, install TWRP for your phone first.
B. Get the .zip file of Magisk/SuperSU so you can install them, the links are https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 and https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
C. Reboot your phone to recovery or just plug it in, open the command prompt again just like in the previous step and put "adb reboot recovery" without quotes.
D. Tap "Install" on your TWRP recovery and select the respective installation .zip file of your chosen root management app, and wait for it to finish.
1D. The .zip for both SuperSU and Magisk can be installed through "adb sideload", if incase you don't have an SD card! It may also work with fastboot as well but I need someone to confirm this.
E. When it's done, wipe the cache first, then reboot.
1E. If the root management app didn't appear in your phone after boot, just install the APK of it in the Play Store and check if root has been applied, if not, repeat step C and D again.
BONUS: It may be useful also to grab EdXposed or LSposed for Magisk and the link is here: https://forum.xda-developers.com/t/...or-of-xposed-oreo-pie-q-r-2020-07-19.4070199/ and here: https://forum.xda-developers.com/t/...e-magisk-module-edxposed-alternative.4228973/, please choose only one! You will use the normal Xposed if you're using a different root management app such as SuperSU, the link is here: https://forum.xda-developers.com/showthread.php?t=3034811
What this does is that if the app is an Xposed/EdXposed/LSposed framework module, any modifications it does to your phone will be based on memory only, it won't modify your phone directly which means your device will be clean, and if it incase the said modification bricks your phone, you can easily recover from it too!
BONUS 2: I also recommend getting the Busybox module from Magisk itself, it can easily be downloaded from the Magisk app, you will need this module if you want your root applications to work more efficiently and avoid errors, as most of them requires Busybox to work, don't use the Busybox installer apps on Play Store as they modify /system directly, only use it if you are using SuperSU.
4. Additional modifications
Once you've managed to root your phone and everything else, what I recommend you could do with your device is to get the following apps:
Titanium Backup - It has the ability to back up apps on your phone, and even its data! this app could do so much more than with what I just mentioned.
LSpeed - A root boosting app that has almost every root tweak packed into it, its really convenient to use! I do not recommend using Entropy tweaks as I heard it is a placebo.
Greenify - For me, this is the only legit battery saving app aside from LSpeed which also offers tons of battery saving features, it requires Xposed to have more options you have to buy it to gain full functionality
ROM Toolbox - This app pretty much contains everything a rooted user needs, such as a terminal and root-based file manager.
System app uninstaller (optional) - Just in case if you're planning to remove some bloatware (the list of it is below)
Root Browser - An alternative to ROM Toolbox, this root explorer is really popular and gets the job done without any interruptions.
Terminal emulator - This will allow you to enter various commands on your phone, like being able to reboot the phone without using any keys.
In order to make the phone as fluid as possible, just leave it with stock ROM installed, try to also use lite apps like Facebook Lite to reduce RAM and battery consumption.
Kernel Adiutor - Another great root application, it's like LSpeed but it doesn't automate tweaks, it instead allows you to modify most of it on your own, then it reapplies your tweaks every time your cellphone will boot up if you tap the "Apply on startup" switch. the link for the app is here: https://m.apkpure.com/kernel-adiutor-root/com.grarak.kerneladiutor
NOTE: Most of these apps can be found on the Play Store, and please don't install any more similar root boosting apps such as HEBF, scripts such as V6 Supercharger, or modifying files like build.prop, it is due to the fact that this will conflict with LSpeed, as LSpeed contains most of the tweaks that past scripts and apps provide, this will result in your phone slowing down a lot, Greenify will require Xposed Framework which is mentioned above on the Rooting section, the link to LSpeed is here https://github.com/Paget96/LSpeed, because the app has been removed from Play Store.
WARNING: The perf.zip https://forum.xda-developers.com/android/development/-t3935220 here, that was provided in Xiaomi Redmi Go forum section must be applied with extreme caution, you have to make a backup of your build.prop in /system, and build.prop + default.prop in /vendor for easy recovery, you can use ZipMe to easily make a backup for these files.
5. Stock ROM links
https://xiaomirom.com/en/rom/redmi-go-tiare-global-fastboot-recovery-rom/, this link so far provides all the ROMs (both recovery and fastboot) available for download on this phone, and they are actually light enough, so it will be easy to download them.
https://xiaomifirmwareupdater.com/archive/miui/tiare/ a new link I've found recently, this rom contains the .tgz format of the latest ROM for the Xiaomi Redmi Go, which could be used for fastboot and Mi Flash Tool, just search for the model and go for Global.
NOTE: Most of the ROMs for this phone provided on several sites, even on the actual Xiaomi website, has an invalid format of .zip, and doesn't contain a flashall script, as a result, Mi Flash Tool will never be able to use these ROMs, you could not also use adb sideload and fastboot for these ROMs, only the stock recovery of the phone could install the ROM, due to the links provided above finally giving the latest ROM versions for the phone, extracting the stock recovery is very easy now, you can do it yourself but if you need a link, tell me.
5A. Applying the stock ROM
This section will be divided into 2 sections, flashing the ROM through recovery, flashing the ROM through fastboot manually, or automatically with flash_all.bat
Stock recovery method.
A. Download the stock ROM with .zip format and put it into your SD Card.
B. Flash your recovery back to stock with the steps given above, boot into your stock recovery, then using your Power button and volume keys to navigate, select "Apply update from SD card".
C. Select the .zip file and wait for the update to finish.
D. The device will boot up automatically after, if not, just go back to the main menu of the recovery and select "Reboot system", enjoy!
Fastboot manual flashing method.
A. Ensure that you have prepared your device and computer for ADB, now grab the ROM given in this thread in .tgz format, and keep extracting the file until you see the files such as "flash-all.sh" after extraction, as you need to extract the .tgz ROM two times before you could use it properly.
B. Now go to the extracted folder of the stock ROM, go the "images" folder and copy the following image files: boot.img, system.img, recovery.img (make a backup of this file somewhere!), vendor.img, cache.img, userdata.img, persist.img, and splash.img.
C. Paste them to the extracted folder of your SDK Platform Tools where various .exe files are located such as "adb.exe", or in my case the location is "C:\Users\Symphony\Downloads\platform-tools_r29.0.4-windows\platform-tools".
D. Now open your command prompt on this directory, or Shift + Right click, then plug in your phone, now type "adb reboot bootloader" so your phone will go to bootloader, don't forget to enable "USB Debugging" and PTP connection mode before rebooting! (only applies to Windows 8/8.1, it may vary on Windows 7 but it is different on 10, no need for PTP connection mode, you can just turn on USB debugging and that's all)
E. Now, this is a little tricky, but try to follow me as much as you can, make sure first that you are detected with "fastboot devices", input the following commands that I will give so you can flash the ROM to your phone, now go to the command prompt and:
To flash the boot.img to your phone, put the command: "fastboot flash boot boot.img"
For the recovery, the command is: "fastboot flash recovery recovery.img"
For the system or main OS: "fastboot flash system system.img"
For cache: "fastboot flash cache cache.img"
For persist: "fastboot flash persist persist.img"
For the vendor or additional system files: "fastboot flash vendor vendor.img"
For data or apps: "fastboot flash userdata userdata.img"
For splash or probably boot animation: "fastboot flash splash splash.img"
D. After that, type "fastboot reboot", and enjoy!
Fastboot automatic flashing method (NEW!)
A. Extract the fastboot ROM 2 times as instructed, after getting the files, grab all the files and copy it to the directory of your platform tools where files such as "adb.exe" can be found, just copy all the files in there and that's all you have to do.
B. Open the "flash_all.bat" on Notepad and remove the following lines:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || exit /B 1
Afterwards, save the .bat file, that should be ready to use now
C. As instructed above, you must also do "fastboot flashing unlock_critical" after unlocking your bootloader the normal way, this will act as your 2nd unlock command, without this, the flash_all.bat will not work as it should be.
D. Boot up your phone in fastboot mode, open up your adb devices and make sure that your phone is seen in "fastboot devices", once it does, type in "flash_all.bat" without any quotes and execute it, the command will now automatically flash everything without you doing anything else, it will also automatically reboot after doing so.
Bonus section:
1. TWRP-compatible stock ROM
For this part, in order for you to generate a TWRP-flashable stock ROM is by basically making it yourself, you have to make sure that your patch is latest, and its pretty much a good idea to just tick everything in the backup selection except for the recovery, as well as the cache as you don't need those.
Once you have it, go ahead and keep it somewhere safe but easy to find, so if case that you need to use it, you could get it immediately, this is extremely useful so please just do it, as of now, I've confirmed that only the /data backup was usable, but please try to confirm if other partition backups are working for you.
Certain custom ROMs that can boot up in this device could be flashed through TWRP though, and the links of them are provided here in this thread.
2. GSI, AOSP 9 and custom ROMs
The link for AOSP is provided here: https://forum.xda-developers.com/android/development/redmi-aosp-9-t3922192
The link for GSI is right here: https://forum.xda-developers.com/android/general/tested-gsi-redmi-t3924705
These images/ROMs can be applied with TWRP, just make sure to follow the steps mentioned in these posts to avoid inconvenience, don't forget to take precautions too! I haven't tried them, but so far I believe that these are stable to use.
There are also custom ROMs released for the device but I am lazy to link all of them, they can easily be found by going here: https://forum.xda-developers.com/tags/xiaomi-redmi-go/
Please take note that I haven't tested these custom ROMs yet and I most likely never will, since the stock ROM for the device is already good enough, you can comment here and tell me what custom ROMs are stable so I can link them here for future reference.
3. Current status
My phone is still working, yes! and it's still staying strong, updated to 2.25 using the fastboot method and it is still fast, the only issue currently is that SafetyNet is a lot more secure than before, so it will be impossible to use stuff like Google Pay for now.
I usually decided to lay low and just stay with my LSpeed, Kernel Adiutor and Greenify, all I had to do is to tinker with these apps and my phone just reached into a whole new level! The performance improvement is nice, that I didn't need to use a custom ROM anymore.
4. How to install a OTA update after rooting your device
Due to the changes made by Google on SafetyNet, and the fact that this device will always require you to wipe the device every update, it is pretty much the same, it doesn't matter anymore if you are certified or not, you will still receive an OTA update even if your device is not certified as long as you are using the stock ROM, you only won't be able to install it, and if you want to install the OTA update you must install it by flashing the updated fastboot ROM, I have links for it above, you can try installing the OTA updates yourself through the settings but you will still have to do a factory reset anyway, you have to also unroot also and revert to stock recovery, else the installation will fail, and your device may slower afterwards.
5. Bloatware you can safely remove (NEW!)
So, like I said above, as much as how lightweight the device is, there are still bloatware that you can remove if you really want, but it's only 3 of them:
Mi Video
Mint Browser
Mi Music
The rest such as Mi Share and Mint Launcher are also bloatware, you can remove them but to me they are useful so I didn't, do not remove the "Cleaner" app, if it however says something like "com.CleanMaster", you can try removing it but take caution as your Play Store may be removed along with it too.
Credits to everyone who made the apps/tools that I mentioned here! such as @topjohnwu for the Magisk, and @YasiR Siddiqui for the TWRP, @Paget96 for the awesome LSpeed app, @rovo89 for the Xposed Framework and many more, you guys totally rock!

Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
Can you please elaborate all of what you've done so far? I will also ask you a few questions.
1. Is your phone usable with the platform tools? I mean with adb and such.
2. Did you try going into recovery and flashing stock ROM through there?
3. Is your phone being detected by "fastboot devices"? The fastboot mode of Redmi Go is its download mode, and i've provided the link for the stock ROM that's usable thru fastboot mode, as well as on how to apply it.

My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
TheAngryGuitarist said:
My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.
Click to expand...
Click to collapse
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.

_XblackshadowX_ said:
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.
Click to expand...
Click to collapse
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community! ?

TheAngryGuitarist said:
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community!
Click to expand...
Click to collapse
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.

_XblackshadowX_ said:
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.
Click to expand...
Click to collapse
I'm not really sure if a malware caused this issue or a failed system update over-night.

TheAngryGuitarist said:
I'm not really sure if a malware caused this issue or a failed system update over-night.
Click to expand...
Click to collapse
I usually had failed system updates numerous times because when i install them, the phone has already been modified by a lot, and that's actually riskier.
That's why i recommend unrooting and putting back the stock recovery before updating first, still works on mine even with "Device is not certified" by Play Store.

The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282

I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?

_XblackshadowX_ said:
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?
Click to expand...
Click to collapse
Yeah, I've done everything you told, I also turned the connection mode to PTP also. Somehow it just not showing that android with an exclamation mark.
after that, I even tried to use the 15-second ADB installer. after installing that I tried to flash recovery but that just didn't do anything. After using that flashing command, I had the same stock recovery.
I'm really thankful you took the time to answer my question.

Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.

I am not able to flash TWRP on my redmi go

How to update the redmi go to the latest version without formatting/Factory Reset should I just follow Fastboot flashing method and if so which files should I just flash. Thank you

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Hi! sorry for the late reply, if this is the case then it's fine, you can just connect the device, open up adb tools, type adb devices and ensure that your USB debugging is on, and the device will connect immediately, at that point all you need is the adb driver for Fastboot

akki_007 said:
Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.
Click to expand...
Click to collapse
oh no, but why lock your bootloader? you can try using a recovery ROM, you must have a spare SD Card within you, grab a recovery ROM, put it in your sd card then put it into the phone and use it on stock recovery, you should be able to apply it and boot back into the system, please update me

igpraan said:
I am not able to flash TWRP on my redmi go
Click to expand...
Click to collapse
you must have unlocked bootloader if you want to do so.

niknah said:
The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282
Click to expand...
Click to collapse
that's strange, the TWRP I linked isn't giving me any vertical lines

[Guide] Root Xgody Y28 with Magisk (MT6580) and dump stock rom

I am making the following guide because root guides for the Xgody phones are pretty hard to come by, and documentation is sparse. Enjoy.
First, you will need to setup adb and fastboot on your pc. Download Minimal ADB and Fastboot here. If your PC doesn't find drivers for "adb interface", download MTK adb drivers here, and install it by updating the driver for adb interface in device manager.
Now you will need to boot up your phone, go to about phone -> build number -> tap seven times. Head back to settings home, go to dev options, and enable usb debugging, then connect phone to pc. Open minimal adb and fastboot, and verify that the phone is connected by running "adb devices" command. If you see unauthorized next to the phone's serial, then you need to allow access on your phone in the window that has popped up.
Next step is to unlock the bootloader, so that the phone boots with the Magisk patched boot image we will be flashing later on. In developer options, you will now need to check "oem unlocking". Now in adb, type "adb reboot bootloader". Screen should go black, and "fastboot mode" text should appear on screen. Quick Note - Only boot to fastboot using this method. Shutting down the phone by selecting power off in the power menu and then holding the key combo to get into fastboot will cause the oem unlocking switch to flip back to off, and the next step will fail. Thus, make sure to use the adb command to reboot to fastboot mode. Don't know why this is, but it seems to be some sort of lousy anti-unlock protection by the Chinese devs.
Now in fastboot mode, type "fastboot devices" on your PC. you should see the device serial and "fastboot" next to it. If you do not, check device manager again. If you see an unknown device such as "Android" you will need to again install the driver through device manager. However, this time select "bootloader interface", as you are installing for fastboot mode.
Once you see the device in fastboot, you can proceed to unlock the bootloader. Type "fastboot oem unlock". Check the phone, and accept the warning about unlocking bootloader. Now the command should finish and bootloader should be unlocked. Reboot to system with "fastboot reboot". You will see "erasing" as the phone resets, and then it will boot into Android.
Now you are ready to grab your boot.img. We will need to patch this file with Magisk to obtain root access. To obtain the boot.img, you will need to make a full backup of your phone's rom using SP Flash Tool. A detailed guide here is available to guide you through the process. You can grab the VCOM driver and sp flash tool at https://spflashtool.com/. To follow the above guide, you will need to know the cpu and flash memory type. If you didn't know already, the Xgody Y28 is running on an MT6580 and uses EMMC memory.
You can also obtain a copy of the stock rom here - https://mega.nz/#!6vB0gKSK!RJ9SZ3q-Zp33ZYMjTk42A7cgeubvq-W2C4G7Ln4y8Bo However, I recommend making a backup of your own stock rom instead, as that is the safest option. The rom here may differ slightly differ from your phone's and cause issues. Unlikely, but still a good idea to use your own backup.
Either way, you now have a backup of the Y28's stock rom. We now need the boot.img. Connect your phone to your pc, and on the phone, select media device (MTP). This will allow you to copy files to the phone from your pc. Find your boot.img, and copy it to your phone. It doesn't matter where, just put it in an easy to reach location in your internal storage. Next, you will also need to copy over the Magisk Manager apk to your phone. Download it here. Click on "Latest Magisk Manager". Save the apk, and then copy it to your phone as well.
Next on your phone, open your file manager. Find the Magisk Manager apk, and install it. Note that the next part requires you have an internet connection, as Magisk Manager needs to connect to github to download the magisk zip to patch your boot.img with.
Now open the Magisk Manager you just installed. hit install, and select patch. Find your boot.img and select it. After the process is complete, exit Magisk Manager, and find the magisk-patched.img on your phone that magisk created.
Connect your phone to pc again, and copy the patched boot image to your pc. On your PC, navigate to the folder containing your stock rom, and rename boot.img to boot-original.img. Now, copy the magisk-patched.img to the stock rom folder. Rename magisk-patched.img to boot.img.
Next you will need SP Flash Tool. open it up, and select the android-mt6580-scatter.txt in the scatter-loading file. A list of flashable partitions will load once the scatter file is processed. Uncheck all except the boot.img (as this is the only one we want flashed) Now hit download, and connect your phone to your pc. Make sure the phone is turned off, and the battery is removed before connecting to PC. The SP Flash Tool will then flash the boot.img to the phone. Once complete, you can close the program, and unplug your phone.
Boot your phone back up, and open up Magisk Manager. It should now say Magisk is installed.
Congratulations! If you have successfully followed the steps above, you now have a rooted phone.

Root for Aligator s4090 and simmilar MTK6580M devices

Translated via google translate:
!!!Warning!!
This will void the warranty, delete data from the phone, and may brick.
screenshot that the tutorial works: https://postimg.cc/v1khDqNy
What we will need: ADB AND FASTBOOT - everything will be contained in one folder (except for the USB cable and the computer
SP FLASHTOOL
USB CABLE
PC With Windows
Magical
-Preparation
Download all files from the link: https://mega.nz/folder/WxZW1R5L#wiBRGGIDCDmHFuZ_s0ROvw
We extract ZIP Aligator S4090 ....
We extract SP_FLASHTOOL.ZIP
We extract ADB.ZIP
-How to do it
Open the Phone settings and go down, click on "PHONE INFORMATION".
Then go down and click on "ABOUT PHONE". Now your phone information will open. Here we go down and click on the build number before it appears enter the password (if you do not have any then it will not be displayed) and as soon as you enter it will show "VOILÁ, I became a developer. Then click on the back arrow and return to the menu where You will now see the "For Developers" option, click it and turn it off and on "Unlock OEM" (this is important) After turning it on, a pop-up window will appear where you can click Continue, then turn on USB debugging. Open the extracted ADB on the PC and click on INSTALLER, then put Y on each option. After installation, click on START (Windows icon) and type "CMD" in the search and press Enter. Unlock the mobile phone and connect it to the PC. reboot bootloader "and a pop-up window will appear on the phone with" OK ". Now the phone will reboot and type" Fastboot Mode ". Type" fastboot oem unlock "in the command line and a long text will appear on the phone. we will wait until "FASTBOOT RECOVERY REBOOT" appears on the Mobile and type "FASTBOOT REBOOT" in the command line. Let's wait for the phone to start up and turn it off. Now open the Extracted SP FLASHTOOL and click on the .exe file flashtool with the Android icon. Now click on the Folder Icon next to the scatter sign and go to the extracted Aligator folder .... and select the only file that will be displayed. Wait and a list of items to upload will appear below, deselect the preloader item (otherwise it would be a hardbrick) and start Start Download. Now connect the phone in the switched off state with a cable and wait until "Download OK" appears on the screen. Disconnect the cable and start + set up the phone. We will now install the Magisk.apk application. Open it and click on the three dots, where you select the settings. Click on the update channel and select CUSTOM. Next, click on the update url and copy this url: https://raw.githubusercontent.com/topjo ... table.json
Now we turn off the phone again and open SP FLASHTOOL, load the scatter and deselect everything except "BOOT" Click on the file address next to boot and find the file MAGISK_ALIGATORS4090.IMG. click on Start Download. When done, we turn on the phone and have ROOT: D
for whatever thumbs up I'll be happy, this tutorial took me less than a month of extracting, scripting, and creating Scatter.
Acknowledgments: Vipul for the extraction script, Hovatekk for the help with the magisk, MTK-SU for the help and finally Tech Fiber for the help as well. Thanks guys, it wouldn't be possible without you