Database Info

[GUIDE] [SUPPORT] How to root, optimize, and repair Xiaomi Redmi Go. - Android General

The One-for-All Guide to rooting, improving, and fixing various errors in Xiaomi Redmi Go!​Hello everyone! This thread that I made is for all people who wants to modify and gain full access, as well as to repair their Xiaomi Redmi Go devices the well-guided way, I've noticed that nobody has made an all-in-one guide for this phone so I decided to do it, this thread will keep on expanding depending on what I will discover about this phone, but for now, here is the thread, i expect that you have at least a little amount of knowledge when it comes to phones such as ADB and Developer Options.
What can we do with Xiaomi Redmi Go:
1. We can root it, and the best root manager for this phone is Magisk, SuperSU is also good, but if you're planning to use your phone for mobile banking, then Magisk is right for you. (Unfortunately this isn't true right now due to ctsProfile being hard to manipulate, Redmi Go supports hardware backed key attestation which means your device will definitely be not certified no matter what you do, so until we get a new method, don't root your phone if you want to use apps like Google Pay
2. TWRP is the current custom recovery available for this phone, it has flaws, but its currently the best out there, so its worth the shot to install it, the thread for it will guide you.
3. No custom kernels, people said that they have managed to install AOSP 9 and GSI on this device and made it boot up, but for me, it's better to wait for the official ROM update, after all, the device is still supported.
Prerequisites:
1. Xiaomi Redmi Go
2. An internet connection, a strong one is recommended if you want to download a ROM.
3. A computer with SDK Platform Tools ready to use, this is required, the link is here: https://developer.android.com/studio/releases/platform-tools
Don't forget to also get its driver! The link is also here: https://developer.android.com/studio/run/win-usb
The drivers are tricky to install but I will guide you on doing it in the easiest way possible, please continue on the thread.
4. SD card, your user data will be erased later, better back your files up, this is a warning.
5. Turning on "OEM unlocking" and USB Debugging in Developer Options, this is also really important!
Table of contents:
1. Unlocking the bootloader (and setting up ADB)
2. Rooting
3. Applying the custom recovery
4. Additional modifications
5. Stock ROM links
6. Bonus Section
WARNING: I am not responsible for anything that happens to your device as you follow my guide, do not blame me if you turned your device into a paperweight, made it explode, made it fly or whatever it may be, you chose to modify this phone and you should be accountable for it, you must know the consequences of what you're doing, try to point your finger at me because of what YOU did and I will laugh at you.
I am ready to assist though, so please feel free to ask some questions!
Let us begin, this will take several minutes, so please be patient and avoid rushing.
1. Unlocking the bootloader.
NOTE: This requires your computer to have SDK Platform Tools extracted to any location as long as its easy to access, and its really complicated to talk about it here, this step doesn't include the method where you request a code from Xiaomi, but I've provided a link for it.
A. First, get your phone up, and open the folder on where the SDK Platform Tools are placed, make sure that your in the directory where you see the .exe files of the SDK, now, hold Shift on the keyboard and click "Open Command Prompt here" and type "adb reboot bootloader", without quotes don't forget! This applies to all the steps that I will provide, don't forget to change the USB connection mode of your phone to PTP for it to be detected by ADB! (Only applies to Windows 8/8.1) Once your phone is asking for an authorization, check "Always allow this computer" then tap allow.
B. Once your device has been booted up into Fastboot or the bootloader, check first if your device is being detected, type "fastboot devices", if yes then proceed, if no, then stop here for now.
1B. If this happens then you may have to check your drivers and see if its installed correctly, once your device can be seen at "adb devices" it should also been seen in "fastboot devices" and when the phone is in adb sideload, if not then you have to reinstall ADB, get the proper drivers and do it again.
C. Now, type "fastboot oem unlock-go", the terminal will warn you that all of your user data will be removed, if you have them backed up then and go ahead and enter the command, if not, then just type "fastboot reboot" and start backing up your files, then do this again.
D. The phone will boot up and say "Erasing", to confirm that your phone has its bootloader unlocked, once it boots up again see if it says "Unlocked" on the bottom part of your screen, if there is then congratulations, it should be unlocked at this point.
1D. https://www.getdroidtips.com/unlock-bootloader-xiaomi-redmi-go/, this one particular link provides you on how to unlock the bootloader by entering a certain code, I believe this is a safer method but requires a bit of time, go here if you're interested.
NOTE: The phone supports the command "fastboot flashing unlock_critical" if you are going to unlock your phone with the normal command (fastboot oem unlock_go/fastboot flashing unlock), consider using this 2nd command too, what it does is that it allows you to also flash partitions you supposedly don't have access to, just be very careful not to flash any wrong file! It will be useful to make the "flash_all.bat" script work that you can find on the fastboot ROM for this device, more below!
Once your bootloader has been unlocked, you can now proceed to the other steps that I provided here, don't forget to enable USB Debugging on your Developer Options.
1.2 Setting up ADB
1. Grab your phone, unlock and open your Developer Options then enable "USB Debugging", then change your connection type to "PTP" if you are using Windows 8/8.1, I am not sure if this is required on 7, but it is not needed on Windows 10.
2. Go to this link: https://developer.android.com/studio/releases/platform-tools and download the .zip file, then extract it to a location that is easy to access, like your desktop.
3. Get the official Google drivers here: https://developer.android.com/studio/run/win-usb download the .zip file as well, and extract it too.
4. Go to the extracted folder of your SDK Platform Tools, and go to the directory where you can see various .exe files such as "adb.exe", now, hold the Shift key then click the Right mouse button, then click "Open command prompt here" If this doesn't work for you, open up CMD with admin rights, then type in cd *the location of your platform tools* say on mine, I will input cd C:\Users\James\Downloads\platform-tools_r31.0.3-windows\platform-tools then enter
5. Open your Device Manager by pressing Windows + R, put "devmgmt.msc" without any quotes then Enter, do not close the Device Manager until you're done with all the steps! And please be fast here too or else ADB will not work, now go to your extracted folder of the Google USB driver, and look for the file "android_winusb.inf", copy the location path of it as you will need the exact location path of the file later, in my case it was "C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\android_winusb.inf".
4A. There are 3 main ADB devices that you have to install, Android ADB Interface, Android Bootloader Interface and Android Composite ADB Interface, so I will divide this into 3 sections, have your Device Manager, and the exact location of the .inf.
NOTE: Turn off the internet connection of your computer, why? Because, if you let Windows install the drivers for you, the drivers may be incorrect and will break things apart, as we will encounter several "Unknown devices" in the Device Manager and we have to update them with the extracted files from Google.
Android ADB Interface
1. Now, make sure that USB Debugging is enabled, now plug in your phone and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
2. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
NOTE: If you plug your phone and there is no "Android" device with exclamation mark, you can proceed to try and see if adb detects your device by typing "adb devices" in the command right now, it should be since this is what I experienced when setting up my device in Windows 10, this step usually applies only if you are using Windows 8/8.1
Android Bootloader Interface
1. To test, go to the command prompt you opened earlier, and type "adb devices", the device should now be detected at this point, when it does, type "adb reboot bootloader".
2. Now, make sure USB Debugging is enabled on the device before booting it into bootloader, now plug in your phone again and let the drivers install WHILE your computer is offline, Go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Bootloader Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
Android Composite ADB Interface
1. Before proceeding, type "fastboot devices", the device should now also be detected on fastboot, now, type "fastboot reboot", and afterwards, enable "USB Debugging" on the Developer Options, then go your command prompt, then type "adb reboot recovery".
2. Now, now plug in your phone again and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Composite ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
2. Applying the recovery/custom recovery
A. Open up your phone and ensure that USB Debugging has been enabled, now, open up your command prompt just like in Step 1 in Unlocking the Bootloader and type "adb reboot bootloader"
B. Next up, type "fastboot flash recovery path/to/recovery.img", substitute the path/to/ with the actual location of your recovery, and please make sure that the name of the image is "recovery.img"! Or else it will not overwrite/update the recovery, you can also put your recovery.img directly within the platform-tools folder so that all you have to type is "fastboot flash recovery recovery.img" then press enter.
C. Once your done, reboot the phone and press Volume Up + Power at the same time, and the recovery will start. (You may want to do this else the recovery will be automatically removed and replaced with the stock one)
1C. For the stock recovery, once you press the combination, the phone will say "No command", at this point, hold your Power button and press Volume up one time to get into recovery.
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282 here is the link of the TWRP recovery, I encourage you to follow the steps mentioned in the post properly.
WARNING: The fix I provided below is now pushed here for 1 certain reason, before you try to root your phone and do everything else, you must decrypt your internal storage first and it is quite easy, first you must get the decrypt.zip linked in this thread (if the .zip cannot be found, I still have a copy of it), go to TWRP and do "format data", not Wipe Data! How so? Once you reboot to TWRP, it will show you the "Wipe" button, tap that, then the "Format Data" button should show up, this will require you to type in "yes" so type it in, then once it is done formatting, go back to the main TWRP screen, tap "Reboot", then "Reboot to Recovery", afterwards you must go to "Install" then proceed to install the "decrypt.zip", after that you can now flash .zip files from your internal storage too, but beware that you must do this every time you update your device!
3. Rooting your phone
A. To get started, install TWRP for your phone first.
B. Get the .zip file of Magisk/SuperSU so you can install them, the links are https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 and https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
C. Reboot your phone to recovery or just plug it in, open the command prompt again just like in the previous step and put "adb reboot recovery" without quotes.
D. Tap "Install" on your TWRP recovery and select the respective installation .zip file of your chosen root management app, and wait for it to finish.
1D. The .zip for both SuperSU and Magisk can be installed through "adb sideload", if incase you don't have an SD card! It may also work with fastboot as well but I need someone to confirm this.
E. When it's done, wipe the cache first, then reboot.
1E. If the root management app didn't appear in your phone after boot, just install the APK of it in the Play Store and check if root has been applied, if not, repeat step C and D again.
BONUS: It may be useful also to grab EdXposed or LSposed for Magisk and the link is here: https://forum.xda-developers.com/t/...or-of-xposed-oreo-pie-q-r-2020-07-19.4070199/ and here: https://forum.xda-developers.com/t/...e-magisk-module-edxposed-alternative.4228973/, please choose only one! You will use the normal Xposed if you're using a different root management app such as SuperSU, the link is here: https://forum.xda-developers.com/showthread.php?t=3034811
What this does is that if the app is an Xposed/EdXposed/LSposed framework module, any modifications it does to your phone will be based on memory only, it won't modify your phone directly which means your device will be clean, and if it incase the said modification bricks your phone, you can easily recover from it too!
BONUS 2: I also recommend getting the Busybox module from Magisk itself, it can easily be downloaded from the Magisk app, you will need this module if you want your root applications to work more efficiently and avoid errors, as most of them requires Busybox to work, don't use the Busybox installer apps on Play Store as they modify /system directly, only use it if you are using SuperSU.
4. Additional modifications
Once you've managed to root your phone and everything else, what I recommend you could do with your device is to get the following apps:
Titanium Backup - It has the ability to back up apps on your phone, and even its data! this app could do so much more than with what I just mentioned.
LSpeed - A root boosting app that has almost every root tweak packed into it, its really convenient to use! I do not recommend using Entropy tweaks as I heard it is a placebo.
Greenify - For me, this is the only legit battery saving app aside from LSpeed which also offers tons of battery saving features, it requires Xposed to have more options you have to buy it to gain full functionality
ROM Toolbox - This app pretty much contains everything a rooted user needs, such as a terminal and root-based file manager.
System app uninstaller (optional) - Just in case if you're planning to remove some bloatware (the list of it is below)
Root Browser - An alternative to ROM Toolbox, this root explorer is really popular and gets the job done without any interruptions.
Terminal emulator - This will allow you to enter various commands on your phone, like being able to reboot the phone without using any keys.
In order to make the phone as fluid as possible, just leave it with stock ROM installed, try to also use lite apps like Facebook Lite to reduce RAM and battery consumption.
Kernel Adiutor - Another great root application, it's like LSpeed but it doesn't automate tweaks, it instead allows you to modify most of it on your own, then it reapplies your tweaks every time your cellphone will boot up if you tap the "Apply on startup" switch. the link for the app is here: https://m.apkpure.com/kernel-adiutor-root/com.grarak.kerneladiutor
NOTE: Most of these apps can be found on the Play Store, and please don't install any more similar root boosting apps such as HEBF, scripts such as V6 Supercharger, or modifying files like build.prop, it is due to the fact that this will conflict with LSpeed, as LSpeed contains most of the tweaks that past scripts and apps provide, this will result in your phone slowing down a lot, Greenify will require Xposed Framework which is mentioned above on the Rooting section, the link to LSpeed is here https://github.com/Paget96/LSpeed, because the app has been removed from Play Store.
WARNING: The perf.zip https://forum.xda-developers.com/android/development/-t3935220 here, that was provided in Xiaomi Redmi Go forum section must be applied with extreme caution, you have to make a backup of your build.prop in /system, and build.prop + default.prop in /vendor for easy recovery, you can use ZipMe to easily make a backup for these files.
5. Stock ROM links
https://xiaomirom.com/en/rom/redmi-go-tiare-global-fastboot-recovery-rom/, this link so far provides all the ROMs (both recovery and fastboot) available for download on this phone, and they are actually light enough, so it will be easy to download them.
https://xiaomifirmwareupdater.com/archive/miui/tiare/ a new link I've found recently, this rom contains the .tgz format of the latest ROM for the Xiaomi Redmi Go, which could be used for fastboot and Mi Flash Tool, just search for the model and go for Global.
NOTE: Most of the ROMs for this phone provided on several sites, even on the actual Xiaomi website, has an invalid format of .zip, and doesn't contain a flashall script, as a result, Mi Flash Tool will never be able to use these ROMs, you could not also use adb sideload and fastboot for these ROMs, only the stock recovery of the phone could install the ROM, due to the links provided above finally giving the latest ROM versions for the phone, extracting the stock recovery is very easy now, you can do it yourself but if you need a link, tell me.
5A. Applying the stock ROM
This section will be divided into 2 sections, flashing the ROM through recovery, flashing the ROM through fastboot manually, or automatically with flash_all.bat
Stock recovery method.
A. Download the stock ROM with .zip format and put it into your SD Card.
B. Flash your recovery back to stock with the steps given above, boot into your stock recovery, then using your Power button and volume keys to navigate, select "Apply update from SD card".
C. Select the .zip file and wait for the update to finish.
D. The device will boot up automatically after, if not, just go back to the main menu of the recovery and select "Reboot system", enjoy!
Fastboot manual flashing method.
A. Ensure that you have prepared your device and computer for ADB, now grab the ROM given in this thread in .tgz format, and keep extracting the file until you see the files such as "flash-all.sh" after extraction, as you need to extract the .tgz ROM two times before you could use it properly.
B. Now go to the extracted folder of the stock ROM, go the "images" folder and copy the following image files: boot.img, system.img, recovery.img (make a backup of this file somewhere!), vendor.img, cache.img, userdata.img, persist.img, and splash.img.
C. Paste them to the extracted folder of your SDK Platform Tools where various .exe files are located such as "adb.exe", or in my case the location is "C:\Users\Symphony\Downloads\platform-tools_r29.0.4-windows\platform-tools".
D. Now open your command prompt on this directory, or Shift + Right click, then plug in your phone, now type "adb reboot bootloader" so your phone will go to bootloader, don't forget to enable "USB Debugging" and PTP connection mode before rebooting! (only applies to Windows 8/8.1, it may vary on Windows 7 but it is different on 10, no need for PTP connection mode, you can just turn on USB debugging and that's all)
E. Now, this is a little tricky, but try to follow me as much as you can, make sure first that you are detected with "fastboot devices", input the following commands that I will give so you can flash the ROM to your phone, now go to the command prompt and:
To flash the boot.img to your phone, put the command: "fastboot flash boot boot.img"
For the recovery, the command is: "fastboot flash recovery recovery.img"
For the system or main OS: "fastboot flash system system.img"
For cache: "fastboot flash cache cache.img"
For persist: "fastboot flash persist persist.img"
For the vendor or additional system files: "fastboot flash vendor vendor.img"
For data or apps: "fastboot flash userdata userdata.img"
For splash or probably boot animation: "fastboot flash splash splash.img"
D. After that, type "fastboot reboot", and enjoy!
Fastboot automatic flashing method (NEW!)
A. Extract the fastboot ROM 2 times as instructed, after getting the files, grab all the files and copy it to the directory of your platform tools where files such as "adb.exe" can be found, just copy all the files in there and that's all you have to do.
B. Open the "flash_all.bat" on Notepad and remove the following lines:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || exit /B 1
Afterwards, save the .bat file, that should be ready to use now
C. As instructed above, you must also do "fastboot flashing unlock_critical" after unlocking your bootloader the normal way, this will act as your 2nd unlock command, without this, the flash_all.bat will not work as it should be.
D. Boot up your phone in fastboot mode, open up your adb devices and make sure that your phone is seen in "fastboot devices", once it does, type in "flash_all.bat" without any quotes and execute it, the command will now automatically flash everything without you doing anything else, it will also automatically reboot after doing so.
Bonus section:
1. TWRP-compatible stock ROM
For this part, in order for you to generate a TWRP-flashable stock ROM is by basically making it yourself, you have to make sure that your patch is latest, and its pretty much a good idea to just tick everything in the backup selection except for the recovery, as well as the cache as you don't need those.
Once you have it, go ahead and keep it somewhere safe but easy to find, so if case that you need to use it, you could get it immediately, this is extremely useful so please just do it, as of now, I've confirmed that only the /data backup was usable, but please try to confirm if other partition backups are working for you.
Certain custom ROMs that can boot up in this device could be flashed through TWRP though, and the links of them are provided here in this thread.
2. GSI, AOSP 9 and custom ROMs
The link for AOSP is provided here: https://forum.xda-developers.com/android/development/redmi-aosp-9-t3922192
The link for GSI is right here: https://forum.xda-developers.com/android/general/tested-gsi-redmi-t3924705
These images/ROMs can be applied with TWRP, just make sure to follow the steps mentioned in these posts to avoid inconvenience, don't forget to take precautions too! I haven't tried them, but so far I believe that these are stable to use.
There are also custom ROMs released for the device but I am lazy to link all of them, they can easily be found by going here: https://forum.xda-developers.com/tags/xiaomi-redmi-go/
Please take note that I haven't tested these custom ROMs yet and I most likely never will, since the stock ROM for the device is already good enough, you can comment here and tell me what custom ROMs are stable so I can link them here for future reference.
3. Current status
My phone is still working, yes! and it's still staying strong, updated to 2.25 using the fastboot method and it is still fast, the only issue currently is that SafetyNet is a lot more secure than before, so it will be impossible to use stuff like Google Pay for now.
I usually decided to lay low and just stay with my LSpeed, Kernel Adiutor and Greenify, all I had to do is to tinker with these apps and my phone just reached into a whole new level! The performance improvement is nice, that I didn't need to use a custom ROM anymore.
4. How to install a OTA update after rooting your device
Due to the changes made by Google on SafetyNet, and the fact that this device will always require you to wipe the device every update, it is pretty much the same, it doesn't matter anymore if you are certified or not, you will still receive an OTA update even if your device is not certified as long as you are using the stock ROM, you only won't be able to install it, and if you want to install the OTA update you must install it by flashing the updated fastboot ROM, I have links for it above, you can try installing the OTA updates yourself through the settings but you will still have to do a factory reset anyway, you have to also unroot also and revert to stock recovery, else the installation will fail, and your device may slower afterwards.
5. Bloatware you can safely remove (NEW!)
So, like I said above, as much as how lightweight the device is, there are still bloatware that you can remove if you really want, but it's only 3 of them:
Mi Video
Mint Browser
Mi Music
The rest such as Mi Share and Mint Launcher are also bloatware, you can remove them but to me they are useful so I didn't, do not remove the "Cleaner" app, if it however says something like "com.CleanMaster", you can try removing it but take caution as your Play Store may be removed along with it too.
Credits to everyone who made the apps/tools that I mentioned here! such as @topjohnwu for the Magisk, and @YasiR Siddiqui for the TWRP, @Paget96 for the awesome LSpeed app, @rovo89 for the Xposed Framework and many more, you guys totally rock!

Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
Can you please elaborate all of what you've done so far? I will also ask you a few questions.
1. Is your phone usable with the platform tools? I mean with adb and such.
2. Did you try going into recovery and flashing stock ROM through there?
3. Is your phone being detected by "fastboot devices"? The fastboot mode of Redmi Go is its download mode, and i've provided the link for the stock ROM that's usable thru fastboot mode, as well as on how to apply it.

My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.

TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
TheAngryGuitarist said:
My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.
Click to expand...
Click to collapse
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.

_XblackshadowX_ said:
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.
Click to expand...
Click to collapse
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community! ?

TheAngryGuitarist said:
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community!
Click to expand...
Click to collapse
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.

_XblackshadowX_ said:
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.
Click to expand...
Click to collapse
I'm not really sure if a malware caused this issue or a failed system update over-night.

TheAngryGuitarist said:
I'm not really sure if a malware caused this issue or a failed system update over-night.
Click to expand...
Click to collapse
I usually had failed system updates numerous times because when i install them, the phone has already been modified by a lot, and that's actually riskier.
That's why i recommend unrooting and putting back the stock recovery before updating first, still works on mine even with "Device is not certified" by Play Store.

The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282

I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?

_XblackshadowX_ said:
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?
Click to expand...
Click to collapse
Yeah, I've done everything you told, I also turned the connection mode to PTP also. Somehow it just not showing that android with an exclamation mark.
after that, I even tried to use the 15-second ADB installer. after installing that I tried to flash recovery but that just didn't do anything. After using that flashing command, I had the same stock recovery.
I'm really thankful you took the time to answer my question.

Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.

I am not able to flash TWRP on my redmi go

How to update the redmi go to the latest version without formatting/Factory Reset should I just follow Fastboot flashing method and if so which files should I just flash. Thank you

bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Hi! sorry for the late reply, if this is the case then it's fine, you can just connect the device, open up adb tools, type adb devices and ensure that your USB debugging is on, and the device will connect immediately, at that point all you need is the adb driver for Fastboot

akki_007 said:
Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.
Click to expand...
Click to collapse
oh no, but why lock your bootloader? you can try using a recovery ROM, you must have a spare SD Card within you, grab a recovery ROM, put it in your sd card then put it into the phone and use it on stock recovery, you should be able to apply it and boot back into the system, please update me

igpraan said:
I am not able to flash TWRP on my redmi go
Click to expand...
Click to collapse
you must have unlocked bootloader if you want to do so.

niknah said:
The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282
Click to expand...
Click to collapse
that's strange, the TWRP I linked isn't giving me any vertical lines

Related

Download
Search for TWRP recovery for LG V10 H901 (File: twrp-2.8.7.0-h901.img (31.7 MB))
Backup Apps and Data
While this process should not wipe any of your data, a backup is highly recommended. Once you install a custom recovery like TWRP, make sure you backup your system, data,etc. from the recovery. It will be helpful in case anything goes wrong.
Prerequisites
This guide is compatible with LG V10 H901 only. Do not try it on any other devices or variants.
Unlocked bootloader is required to install a custom recovery like TWRP on your device. Click here.
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
Install Motorola USB Drivers on your computer.
Open Settings> Developer options and enable USB Debugging on your device.
Go to Developer options and enable Allow oem unlock.
How to Install TWRP Recovery on LG V10 H901
Download the recovery image file. Extract if in case a zip file. Now transfer the file to your PC where you can easily locate it.
Make sure you have setup ADB and fastboot on your PC. Also accept Always allow from this computer when you plug in the device for first time to enable USB Debugging.
Now power off your device and unplug it from your PC.
Boot into the bootloader or fastboot mode. To do so, press and hold volume down and the power button simultaneously for 5-6 seconds. When you see the bootloader screen, connect your device to the PC using a USB cable.(Choose fasboot if option is available) Alternatively, you can also issue the following command through your cmd or terminal, while connected to the PC in order to boot into the bootloader.
"adb reboot bootloader"
Navigate to the location where you have placed the recovery file. Rename the recovery file to a simple one, like recovery.img. While the folder with recovery.img file is open, hold shift key on keyboard and right-click on an empty space and select “Open command window here” option to launch a cmd window.
Now issue the following command in the command prompt to check your device connectivity
"fastboot devices"
Now flash custom recovery. Issue the following command for that.
"fastboot flash recovery recovery.img"
Custom recovery will now be installed on your device. Now boot your phone in recovery mode. You can do this by turning your device off and then press and hold volume down and power keys at the same time. Or you can simply enter the following command.
"fastboot boot recovery.img"
Once into the recovery, you can backup your current ROM, data, EFS and more.
Once you have installed TWRP, you are all set to install custom packages onto the device’s system. Alternatively, while on Linux or Mac OS, you can issue “./fastboot flash recovery recovery.img” command to flash the TWRP recovery.
Root
As you already have TWRP, simply flash the SuperSU file (version 2.56) to gain root access

@TheJesus @KAsp3rd, thanks guys for everything you've done over the past few days. no shade to @joe01gun but if people are going to use these instructions make sure you search the rest of the forum for what thejesus and kasp3rd put together to get us to this point - definitely appreciated. thanks @joe01gun for putting these additional instructions together.

Your post says the following:
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
yet, there's no link to the necessary files to "unzip" them. Any suggestions?
Thank you for the help, but where do we get fastboot set up on our PCs? Yes, this is getting confusing with the steps outlined above. I followed the first step and had to take out the battery because I was stuck in fastboot screen with small tiny text in the top left that didn't respond to any manipulation with the volume keys on the back of the device and wouldn't restart any way until I took out the battery.

sanjsrik said:
Your post says the following:
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
yet, there's no link to the necessary files to "unzip" them. Any suggestions?
Click to expand...
Click to collapse
I think it's cause he's not allowed to post links yet cause he's too new. I followed this guide http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
You can get twrp from the development forum.

Why
Intended to put the information condensed....
Yep....new
Links could not be uploaded.

joe01gun said:
Intended to put the information condensed....
Yep....new
Links could not be uploaded.
Click to expand...
Click to collapse
Your condensed thread is more convoluted than the actual development thread which also includes the links to everything.
I'm still wondering why you have install Motorola USB drivers for an LG phone..

Understood
Understood

The one on development is straightforward and I managed to make it done.
If you don't lock the bootloader back, you will see bootloader unlocked when starting up.
If you have root enabled file explorer, you should remove /system/priv-app/adaptclient folder to avoid annoying root request from adapt.

Please use the main dev thread for instructions on what to do, found below. Having duplicates for what is essentially the same thing can cause confusion and just takes up unnecessary space. So I have closed the thread.
[Recovery][LG-H901] Unofficial TWRP
Forum moderator,
matt4321

For background, I have Verizon pixel 2 and am using a Mac.
I went down a massive rabbit hole last night reading through these forums and all the posts and was able to unlock bootloader, flash the January OTA and then root by doing the modified boot file with magisk. (interestingly enough the booting into recovery gives me red ! Over a dead Android and I could not load the OTA that way, nor did the adb sideload OTA comand work either, I had to push the extracted walleye img and then the zip file as discussed in one of the steps in some other thread here)
So anywho, in the end I now have a phone that gives me 2 errors when it reboots, one for unlocked bootloader and another for root telling me something is wrong with my phone and i should contact the manufacturer (which I read on here is normal), but my biggest issue is that my ADT alarm app doesn't work anymore (even if i check it off for hide in magisk). I feel like the root is just not worth it for me and I want to revert to completely stock image, even if it resets my phone and I have to re back everything up all over again like did when i had to do the unlocking of the boot loader.
So -- What are the steps I should take?
1)uninstall magisk from magisk manager?
2)delete magisk manager?
The above will unroot me, correct?
3)Do I push the stock boot image file onto the phone?
4) do I have to repush the latest OTA walleye image and zip file onto the phone again?
5) do I then do the adb reboot and do the flashing lock command (same command i did to unlock the boot loader) to lock up the bootloader and reset to stock?
If someone could be as explicit as possible in correctiong or validating my steps above it would be much, much appreciated.
I don't want to do any more unnecessary steps in flashing things than is needed so if I have extra steps above (perhaps 4 is not needed?) Let me know.
Thanks

Proceed with Caution
I am not an expert by any means, but can speak from personal experience. I was in the exact same situation as you. I followed the detailed steps to unlock the bootloader on my pixel 2, received similar issues, and the same prompt when the phone rebooted. All that to say proceed with caution.
My thoughts on questions 1 & 2: I personally wouldn't recommend you remove or delete magisk from the manager. When I did i had to reinstall it via twrp. My phone functioned fine, apart from the error at reboot.
My thoughts on questions 3 -5: When I followed the steps on XDA for your questions here I ended up bricking my Pixel 2 with locked bootloader from Verizon. Probably an error on my part, but wouldn't want someone else to go through the headache, hours of issues, and then an expensive paper weight.
My suggestion would be to:
1. Leave your phone as is and attempt to trouble shoot the app or apps you are having issue with
2. contact Google support on your phone and see if they would replace it
3. wait for an established method to unroot the pixel 2 here
Thankfully Google replaced my phone due to the error after rebooting, prior to me bricking it. I knew I had a replacement phone coming. So I attempted to go back to stock and that is when I messed it up.
Note sure this is exactly what you were looking for, but hope this helps you.

Dozens of posts with hundreds of pages on how to root but no advice on how to go back to stock cleanly?

iridium7777 said:
Dozens of posts with hundreds of pages on how to root but no advice on how to go back to stock cleanly?
Click to expand...
Click to collapse
Your version is Verizon which is making things more complicated. Generally when the bootloader is unlocked, you just hit flash-all.bat and then relock the phone. Given that the Verizon I'm not sure.
So you are on stock ROM with all these apks loaded ? If you go to settings, then do a factory data reset, you'll reset the phone back to stock and completely wipe the phone and return it to stock, at that point you can go into bootloader mode and relock.
Again your bootloader is unlocked, so the flash-all is your best option. If you see the red exclamation point with the error android laying on his back, you press power and up volume and toggle that and it will bring in the stock recovery which you can sideload the OTA however it may fail since you have magisk.
I bought my phone stock last year and have not rooted it or modified it in anyway. Too many problems and it only gets harder and harder as Google releases a new phone.

@mikeprius -- thank you for replying. after reading more on here, it seems like that's the way to go -- flash-all script, seems like i don't really need to do 1&2 that i wrote above as the flash-all will wipe that out by itself.
at that point i should be running the latest stock 8.1 but with an unlocked bootloader (and according boot up message screen) and i should be able to re-do the fastbook unlocking command to lock the phone back up.
(and yes, after reading even more now -- and i tried this yesterday -- i completely missed the portion about PWR + Vol Up button, that's why i think i had that issue, but still, i was able to push the update by pushing img and then the zip through).

iridium7777 said:
@mikeprius -- thank you for replying. after reading more on here, it seems like that's the way to go -- flash-all script, seems like i don't really need to do 1&2 that i wrote above as the flash-all will wipe that out by itself.
at that point i should be running the latest stock 8.1 but with an unlocked bootloader (and according boot up message screen) and i should be able to re-do the fastbook unlocking command to lock the phone back up.
(and yes, after reading even more now -- and i tried this yesterday -- i completely missed the portion about PWR + Vol Up button, that's why i think i had that issue, but still, i was able to push the update by pushing img and then the zip through).
Click to expand...
Click to collapse
If I were in your situation and the bootloader is unlocked, just use flash-all which has a wipe script then call it a day. I think trying to screw around even more is just a waste of time and I wouldn't even bother with the OTA, just erase and flash stock. You don't have to relock your bootloader if you don't want to, if you stay fully stock you may still be able to get OTA updates. I'm not sure if a bootloader locked is required someone can chime in as it has been awhile since I've done this, but over 1 yr ago, I just kept the bootloader unlocked, kept things stock and everything was good to go. Obviously there are security issues with an unlocked bootloader, but I'm sure you know this already

@mikeprius you keep saying reset/erase, do you suggest i re-set the phone and then flash the stock image?
i was just going to flash the stock image, i figured it already wipes the phone, and locking the bootloader would wipe it again, so what's the point of erasing all data prior?

Not to hijack this thread, but a question to add... I thought that there were kernels that would mask certain things to allow all of those apps to work, and get rid of the "problem with device" message.
Is that correct?

iridium7777 said:
@mikeprius you keep saying reset/erase, do you suggest i re-set the phone and then flash the stock image?
i was just going to flash the stock image, i figured it already wipes the phone, and locking the bootloader would wipe it again, so what's the point of erasing all data prior?
Click to expand...
Click to collapse
Just flash the stock images. It will auto reset.
Again, don't mess with anything just flash stock images, then go from there.
Also flash the newest version of the stock images out there. The pixel 2 will error if you try to downgrade any version.

here are all the steps to UNROOT and LOCK the boot loader on your Pixel 2 on a Mac (windblows users simply ignore all the "./" references).
1) download the latest ADB tools from google
2) download the latest factory Walleye image
3) unzip files from 1&2 into a common directory
4) edit flash-all.sh file and add "./" infront of every instance of "fastboot" in the script [windows users ignore this step]
5)hook up your phone to your computer in debug and file transfer mode. check that "./adb devices" loads your devide
6)type " ./adb reboot bootloader"
7) check that your device is still connected by typing "./fastboot devices"
8) type "./flash-all.sh"
===the script will run and your phone will be restored to stock, and UNROOTED. upon boot up skip through all of the setup steps and get to the phone settings as fast as you can. enable developer option, enable debug mode, set phone to data transfer ====
9) check that your phone is connect to your computer by "./adb devices"
10) type "./adb reboot bootloader"
11) check your devices is still connected by "./fastboot devices"
12) type "./fastboot flashing lock"
===== this will re-wipe your device again, you'll see the circle of death, and this will LOCK your boot loader back up again======
side note, feel free to skip over the steps where you check that your phone is still connected to the computer (./fastboot devices) if you're less paranoid and comfortable.

iridium7777 said:
here are all the steps to UNROOT and LOCK the boot loader on your Pixel 2 on a Mac (windblows users simply ignore all the "./" references).
1) download the latest ADB tools from google
2) download the latest factory Walleye image
3) unzip files from 1&2 into a common directory
4) edit flash-all.sh file and add "./" infront of every instance of "fastboot" in the script [windows users ignore this step]
5)hook up your phone to your computer in debug and file transfer mode. check that "./adb devices" loads your devide
6)type " ./adb reboot bootloader"
7) check that your device is still connected by typing "./fastboot devices"
8) type "./flash-all.sh"
===the script will run and your phone will be restored to stock, and UNROOTED. upon boot up skip through all of the setup steps and get to the phone settings as fast as you can. enable developer option, enable debug mode, set phone to data transfer ====
9) check that your phone is connect to your computer by "./adb devices"
10) type "./adb reboot bootloader"
11) check your devices is still connected by "./fastboot devices"
12) type "./fastboot flashing lock"
===== this will re-wipe your device again, you'll see the circle of death, and this will LOCK your boot loader back up again======
side note, feel free to skip over the steps where you check that your phone is still connected to the computer (./fastboot devices) if you're less paranoid and comfortable.
Click to expand...
Click to collapse
hey there. what is the command suppose to look like? every combination I try gives me an error:
first, I don't even enter the Fastboot command the same wayit given me an error:
Asads-MacBook:~ asad$ ./fastboot devices
-bash: ./fastboot: No such file or directory
so I try this: Asads-MacBook:~ asad$ fastboot devices
[serial #] fastboot
these are all the errors I get:
Asads-MacBook:~ asad$ cd /Users/asad/Desktop/walleye-opm1.171019.021
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: fastboot./: No such file or directory
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: ./fastboot: No such file or directory
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
fastboot: usage: unknown command ./flash
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: fastboot./: No such file or directory
...
how is the command suppose to look that I can edit it the right way?

"fastboot: No such file or directory" means that you didn't do step 1, step 3 on the file you didn't download, and there should probably be a "cd /<whatever the 'common directory'>" is. (I just created a directory named adb. That's good enough for me to know what it's for.)
You have to download adb and fastboot (which come in the adb tools file), unzip them to whatever directory you're going to use for flashing the phone, and cd to that directory.
Then, since you're evidently on MacOS, each command has to have ./ in front of it (that says "the current directory"). Try all that, then see what happens.

Rukbat said:
"fastboot: No such file or directory" means that you didn't do step 1, step 3 on the file you didn't download, and there should probably be a "cd /<whatever the 'common directory'>" is. (I just created a directory named adb. That's good enough for me to know what it's for.)
You have to download adb and fastboot (which come in the adb tools file), unzip them to whatever directory you're going to use for flashing the phone, and cd to that directory.
Then, since you're evidently on MacOS, each command has to have ./ in front of it (that says "the current directory"). Try all that, then see what happens.
Click to expand...
Click to collapse
yayy! that worked!
so i had adb and fastboot in a folder (platform-tools) and i had the factory image in its own seperate folder (walleye-files). i was making the cd; walleye folder and trying to flash-all.sh there.
so i had to put the files from the walleye folder into the platform-tools folder. Then I made platform-tools the cd. now when . i could now follow all the steps from 4-12 and got the pixel 2 the way it was OTB.
thanks!

Great! I'm not a Mac expert (last time I used one was the 128K Mac in 1985), so I'm not sure how to export a path in MacOs, so I gave you the complicated way, but you got it done anyway. (If you ever find out how to add the platform-tools folder to your path, you can leave adb and fastboot in there and keep the ROMs [walleye] in their own folder, cd to it and adb and fastboot will still work.)

I am making the following guide because root guides for the Xgody phones are pretty hard to come by, and documentation is sparse. Enjoy.
First, you will need to setup adb and fastboot on your pc. Download Minimal ADB and Fastboot here. If your PC doesn't find drivers for "adb interface", download MTK adb drivers here, and install it by updating the driver for adb interface in device manager.
Now you will need to boot up your phone, go to about phone -> build number -> tap seven times. Head back to settings home, go to dev options, and enable usb debugging, then connect phone to pc. Open minimal adb and fastboot, and verify that the phone is connected by running "adb devices" command. If you see unauthorized next to the phone's serial, then you need to allow access on your phone in the window that has popped up.
Next step is to unlock the bootloader, so that the phone boots with the Magisk patched boot image we will be flashing later on. In developer options, you will now need to check "oem unlocking". Now in adb, type "adb reboot bootloader". Screen should go black, and "fastboot mode" text should appear on screen. Quick Note - Only boot to fastboot using this method. Shutting down the phone by selecting power off in the power menu and then holding the key combo to get into fastboot will cause the oem unlocking switch to flip back to off, and the next step will fail. Thus, make sure to use the adb command to reboot to fastboot mode. Don't know why this is, but it seems to be some sort of lousy anti-unlock protection by the Chinese devs.
Now in fastboot mode, type "fastboot devices" on your PC. you should see the device serial and "fastboot" next to it. If you do not, check device manager again. If you see an unknown device such as "Android" you will need to again install the driver through device manager. However, this time select "bootloader interface", as you are installing for fastboot mode.
Once you see the device in fastboot, you can proceed to unlock the bootloader. Type "fastboot oem unlock". Check the phone, and accept the warning about unlocking bootloader. Now the command should finish and bootloader should be unlocked. Reboot to system with "fastboot reboot". You will see "erasing" as the phone resets, and then it will boot into Android.
Now you are ready to grab your boot.img. We will need to patch this file with Magisk to obtain root access. To obtain the boot.img, you will need to make a full backup of your phone's rom using SP Flash Tool. A detailed guide here is available to guide you through the process. You can grab the VCOM driver and sp flash tool at https://spflashtool.com/. To follow the above guide, you will need to know the cpu and flash memory type. If you didn't know already, the Xgody Y28 is running on an MT6580 and uses EMMC memory.
You can also obtain a copy of the stock rom here - https://mega.nz/#!6vB0gKSK!RJ9SZ3q-Zp33ZYMjTk42A7cgeubvq-W2C4G7Ln4y8Bo However, I recommend making a backup of your own stock rom instead, as that is the safest option. The rom here may differ slightly differ from your phone's and cause issues. Unlikely, but still a good idea to use your own backup.
Either way, you now have a backup of the Y28's stock rom. We now need the boot.img. Connect your phone to your pc, and on the phone, select media device (MTP). This will allow you to copy files to the phone from your pc. Find your boot.img, and copy it to your phone. It doesn't matter where, just put it in an easy to reach location in your internal storage. Next, you will also need to copy over the Magisk Manager apk to your phone. Download it here. Click on "Latest Magisk Manager". Save the apk, and then copy it to your phone as well.
Next on your phone, open your file manager. Find the Magisk Manager apk, and install it. Note that the next part requires you have an internet connection, as Magisk Manager needs to connect to github to download the magisk zip to patch your boot.img with.
Now open the Magisk Manager you just installed. hit install, and select patch. Find your boot.img and select it. After the process is complete, exit Magisk Manager, and find the magisk-patched.img on your phone that magisk created.
Connect your phone to pc again, and copy the patched boot image to your pc. On your PC, navigate to the folder containing your stock rom, and rename boot.img to boot-original.img. Now, copy the magisk-patched.img to the stock rom folder. Rename magisk-patched.img to boot.img.
Next you will need SP Flash Tool. open it up, and select the android-mt6580-scatter.txt in the scatter-loading file. A list of flashable partitions will load once the scatter file is processed. Uncheck all except the boot.img (as this is the only one we want flashed) Now hit download, and connect your phone to your pc. Make sure the phone is turned off, and the battery is removed before connecting to PC. The SP Flash Tool will then flash the boot.img to the phone. Once complete, you can close the program, and unplug your phone.
Boot your phone back up, and open up Magisk Manager. It should now say Magisk is installed.
Congratulations! If you have successfully followed the steps above, you now have a rooted phone.

So I may be doing something totally idiotic, but I seem to be stuck at the most simple part of unlocking my bootloader.
I follow this to step 2:
https://www.xda-developers.com/unlock-bootloader-root-oneplus-7-pro/
when it says "Set up ADB" I follow the link to this:
https://www.xda-developers.com/install-adb-windows-macos-linux/
until I get to step 7. When I enter the command 'adb devices' I never get a serial number nor a prompt to allow or deny USB Debugging access. I never get see my device’s serial number in the command prompt.
So doing a bit of digging I have looked into ensuring my ADB and One Plus driver was installed correctly, and I even purchased a new data transfer cable to make sure that wasn't the issue.
I check my device drivers and see get an error in my ADB Interface driver, but after following a few tutorials I'm still lost as to whether its updated or if I'm doing so incorrectly, or if that's even the problem.
Any direction would be appreciated.
I am running Windows 8.1 and my device is Android 10, model GM1915.

NephilimHoss said:
So I may be doing something totally idiotic, but I seem to be stuck at the most simple part of unlocking my bootloader.
I check my device drivers and see get an error in my ADB Interface driver, but after following a few tutorials I'm still lost as to whether its updated or if I'm doing so incorrectly, or if that's even the problem.
Click to expand...
Click to collapse
Hallelujah!!
Finally found a way to manually install the correct driver from a tutorial on visualgbd{dot}com, so now my device is recognised.
I had to find where my drivers were being default downloaded since they weren't in the place the tutorial indicated, but that was the only hitch.
SO. On to the actual unlock. :fingers-crossed:

So I need help.
I followed an XDA video tutorial which was a bit difficult for a newbie, but I think I did everything correctly up to installing TWRP.
I got to the point of flashing my ROM and jumped to the Eelo website instructions:
- Go to main menu, then tap Wipe.
- Now tap Format Data and continue with the formatting process. This will remove encryption as well as delete all files stored on the internal storage.
- Return to the previous menu and tap Advanced Wipe.
- Select the Cache and System partitions to be wiped and then Swipe to Wipe.
- Sideload the /e/ .zip package:
- On the device, select “Advanced”, “ADB Sideload”, then swipe to begin sideload.
- On the host machine, sideload the package using: 'adb sideload filename.zip'
I followed this and while the package did not sideload, I beleive my recovery partition was wiped I seem to be stuck.
I'm at the point where I feel I need to Flash OEM Stock and start over, but I am getting a bootloader loop.
Really need help. I feel at this point I'm going to start making things worse as I look at various tutorials and whatnot.

In case additional information is helpful:
My device does not show up in my device list, but it is detected with "fastboot devices".
I attempted to flash TWRP with "fastboot flash boot <TWRP.img> and it writes to 'boot-a'. But when I then try to boot into recovery mode, instead of booting into TWRP I enter the fastboot screen.
I tried using mauronofrio's Tool All In One to flash stock ROM and possibly fix the partition, if thats what the problem is, but I cant tell it did anything.

Preface​Luckily, it looks like Infinix is following the general trend of Android root solutions being more straightforward than in the recent past. Besides the usual spiel about your warranty being voided, and the annoying chirp each time you boot your phone, this hopefully won't present any problems for you if you do end up rooting your phone.
Notices​
Still, I'm not responsible for anything bad that will happen to your phone if you do this, and there's no support guaranteed either from me or your OEM/support centre.
There's quite a few steps to this, and naturally you're gonna need a few more things to setup before you even start.
Your phone's data will be reset, please backup everything you'd like to keep before rooting your phone (now and in general).
You do need to know some things already, mainly what ADB and Fastboot are, and how to keep your working environment clean and straightforward.
Please do review all the tools you're working with, be sure that you personally trust all the software you're running.
And last but not least, you won't be able to update your phone through OTA updates anymore unless you go back to stock firmware.
The process​
Make an environment for easy access:
Setup ADB and Fastboot (either as a local executable or a global environment variable to that executable).
Setup an easy to access directory with the Google Fastboot driver in it.
Grab your firmware's boot.img file, or grab the one attached to this post, or from here (and skip to the preliminary work section):
1. Download your phone's current ROM.
2. Extract it, as it should be a simple .zip file.
3. Look for the file of the same name (boot.img).
4. Copy it to your phone's storage, anywhere works.
Install the Magisk APK (from their Github).
Once it's installed, Magisk's app frontend allows you to patch your stock boot.img with itself, the gist of it is:
Click on Install within the app, in the "Magisk" section of the main menu.
Click "Select and patch a file", a file selection menu will show up, select the stock boot.img, then start the installation.
Magisk should spit out a patched boot.img named in the format of magisk_patched_[random_strings].img, in your phone's /sdcard/Download/ directory.
Copy that back into our working directory, and rename it to magisk_patched.img for easier usage.
Now, let's do some preliminary work, in any order, really:
Have Powershell or CMD open in the directory of all your tools, alongside the patched image.
Click to expand...
Click to collapse
From here on out, if you have to use adb as a command, and it's not a global environment variable, use ./adb while in the working directory instead, the same goes for fastboot.
Click to expand...
Click to collapse
Make sure that the adb daemon (adbd) is properly detecting your phone:
Enable developer options.
Enable ADB debugging.
Run adb devices to start the server daemon for ADB, and see if ADB detects your phone.
Authorize your PC for ADB debugging if it prompts you to.
Click to expand...
Click to collapse
Infinix's implementation of Fastboot will exit back out of itself and into normal boot after 60 seconds of inactivity, which makes this a tad annoying, although you can simply send it any input to reset that timer.
Click to expand...
Click to collapse
Let's start:
Restart the phone into Fastboot, adb reboot bootloader loader, it'll take a second, the phone is slow.
Unlock flashing 3rd party software, fastboot flashing unlock, the phone will prompt you on the screen to confirm doing this. Yes, this will void your warranty.
Flash magisk_patched.img to both A and B virtual partitions, fastboot flash boot_a magisk_patched.img and then fastboot flash boot_b magisk_patched.img.
That should be it! fastboot reboot to boot normally!
Be sure to also run the Magisk app so it finishes setting itself up, with another reboot, naturally.
Technicalities​The Infinix Hot 30 Play does have a dedicated vbmeta partition, it's advised that you also flash it alongside flashing the patched boot.img for Verified Boot, but that's not necessary if you don't want to tinker with your super partition's crypto keys.
Thank yous​- topjohnwu for their work on Magisk.
- ansh_/ and their post/guide on rooting the Infinix Hot 11, that I used originally.

Addendum​
Using fastboot with MediaTek SoCs will be a bit of a pain as their driver availibilty is limited, if it doesn't get installed by Windows automatically, you have a few options:
Grab the Google's Pixel driver, and install it in realtime during fastboot.
Try to install the VCOM driver from a source you trust.
For grabbing the Google one, you'll have to:
Extract the driver somewhere easy to access.
Open Windows' Device Manager.
Plug in your phone during fastboot to your Windows PC.
Replace the "Unknown" entry for your phone with the Google driver in device manager, within the 60 second window it stays open in.
Note that you'll have to do this every time you go into fastboot.