The One-for-All Guide to rooting, improving, and fixing various errors in Xiaomi Redmi Go!Hello everyone! This thread that I made is for all people who wants to modify and gain full access, as well as to repair their Xiaomi Redmi Go devices the well-guided way, I've noticed that nobody has made an all-in-one guide for this phone so I decided to do it, this thread will keep on expanding depending on what I will discover about this phone, but for now, here is the thread, i expect that you have at least a little amount of knowledge when it comes to phones such as ADB and Developer Options.
What can we do with Xiaomi Redmi Go:
1. We can root it, and the best root manager for this phone is Magisk, SuperSU is also good, but if you're planning to use your phone for mobile banking, then Magisk is right for you. (Unfortunately this isn't true right now due to ctsProfile being hard to manipulate, Redmi Go supports hardware backed key attestation which means your device will definitely be not certified no matter what you do, so until we get a new method, don't root your phone if you want to use apps like Google Pay
2. TWRP is the current custom recovery available for this phone, it has flaws, but its currently the best out there, so its worth the shot to install it, the thread for it will guide you.
3. No custom kernels, people said that they have managed to install AOSP 9 and GSI on this device and made it boot up, but for me, it's better to wait for the official ROM update, after all, the device is still supported.
Prerequisites:
1. Xiaomi Redmi Go
2. An internet connection, a strong one is recommended if you want to download a ROM.
3. A computer with SDK Platform Tools ready to use, this is required, the link is here: https://developer.android.com/studio/releases/platform-tools
Don't forget to also get its driver! The link is also here: https://developer.android.com/studio/run/win-usb
The drivers are tricky to install but I will guide you on doing it in the easiest way possible, please continue on the thread.
4. SD card, your user data will be erased later, better back your files up, this is a warning.
5. Turning on "OEM unlocking" and USB Debugging in Developer Options, this is also really important!
Table of contents:
1. Unlocking the bootloader (and setting up ADB)
2. Rooting
3. Applying the custom recovery
4. Additional modifications
5. Stock ROM links
6. Bonus Section
WARNING: I am not responsible for anything that happens to your device as you follow my guide, do not blame me if you turned your device into a paperweight, made it explode, made it fly or whatever it may be, you chose to modify this phone and you should be accountable for it, you must know the consequences of what you're doing, try to point your finger at me because of what YOU did and I will laugh at you.
I am ready to assist though, so please feel free to ask some questions!
Let us begin, this will take several minutes, so please be patient and avoid rushing.
1. Unlocking the bootloader.
NOTE: This requires your computer to have SDK Platform Tools extracted to any location as long as its easy to access, and its really complicated to talk about it here, this step doesn't include the method where you request a code from Xiaomi, but I've provided a link for it.
A. First, get your phone up, and open the folder on where the SDK Platform Tools are placed, make sure that your in the directory where you see the .exe files of the SDK, now, hold Shift on the keyboard and click "Open Command Prompt here" and type "adb reboot bootloader", without quotes don't forget! This applies to all the steps that I will provide, don't forget to change the USB connection mode of your phone to PTP for it to be detected by ADB! (Only applies to Windows 8/8.1) Once your phone is asking for an authorization, check "Always allow this computer" then tap allow.
B. Once your device has been booted up into Fastboot or the bootloader, check first if your device is being detected, type "fastboot devices", if yes then proceed, if no, then stop here for now.
1B. If this happens then you may have to check your drivers and see if its installed correctly, once your device can be seen at "adb devices" it should also been seen in "fastboot devices" and when the phone is in adb sideload, if not then you have to reinstall ADB, get the proper drivers and do it again.
C. Now, type "fastboot oem unlock-go", the terminal will warn you that all of your user data will be removed, if you have them backed up then and go ahead and enter the command, if not, then just type "fastboot reboot" and start backing up your files, then do this again.
D. The phone will boot up and say "Erasing", to confirm that your phone has its bootloader unlocked, once it boots up again see if it says "Unlocked" on the bottom part of your screen, if there is then congratulations, it should be unlocked at this point.
1D. https://www.getdroidtips.com/unlock-bootloader-xiaomi-redmi-go/, this one particular link provides you on how to unlock the bootloader by entering a certain code, I believe this is a safer method but requires a bit of time, go here if you're interested.
NOTE: The phone supports the command "fastboot flashing unlock_critical" if you are going to unlock your phone with the normal command (fastboot oem unlock_go/fastboot flashing unlock), consider using this 2nd command too, what it does is that it allows you to also flash partitions you supposedly don't have access to, just be very careful not to flash any wrong file! It will be useful to make the "flash_all.bat" script work that you can find on the fastboot ROM for this device, more below!
Once your bootloader has been unlocked, you can now proceed to the other steps that I provided here, don't forget to enable USB Debugging on your Developer Options.
1.2 Setting up ADB
1. Grab your phone, unlock and open your Developer Options then enable "USB Debugging", then change your connection type to "PTP" if you are using Windows 8/8.1, I am not sure if this is required on 7, but it is not needed on Windows 10.
2. Go to this link: https://developer.android.com/studio/releases/platform-tools and download the .zip file, then extract it to a location that is easy to access, like your desktop.
3. Get the official Google drivers here: https://developer.android.com/studio/run/win-usb download the .zip file as well, and extract it too.
4. Go to the extracted folder of your SDK Platform Tools, and go to the directory where you can see various .exe files such as "adb.exe", now, hold the Shift key then click the Right mouse button, then click "Open command prompt here" If this doesn't work for you, open up CMD with admin rights, then type in cd *the location of your platform tools* say on mine, I will input cd C:\Users\James\Downloads\platform-tools_r31.0.3-windows\platform-tools then enter
5. Open your Device Manager by pressing Windows + R, put "devmgmt.msc" without any quotes then Enter, do not close the Device Manager until you're done with all the steps! And please be fast here too or else ADB will not work, now go to your extracted folder of the Google USB driver, and look for the file "android_winusb.inf", copy the location path of it as you will need the exact location path of the file later, in my case it was "C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\android_winusb.inf".
4A. There are 3 main ADB devices that you have to install, Android ADB Interface, Android Bootloader Interface and Android Composite ADB Interface, so I will divide this into 3 sections, have your Device Manager, and the exact location of the .inf.
NOTE: Turn off the internet connection of your computer, why? Because, if you let Windows install the drivers for you, the drivers may be incorrect and will break things apart, as we will encounter several "Unknown devices" in the Device Manager and we have to update them with the extracted files from Google.
Android ADB Interface
1. Now, make sure that USB Debugging is enabled, now plug in your phone and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
2. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
NOTE: If you plug your phone and there is no "Android" device with exclamation mark, you can proceed to try and see if adb detects your device by typing "adb devices" in the command right now, it should be since this is what I experienced when setting up my device in Windows 10, this step usually applies only if you are using Windows 8/8.1
Android Bootloader Interface
1. To test, go to the command prompt you opened earlier, and type "adb devices", the device should now be detected at this point, when it does, type "adb reboot bootloader".
2. Now, make sure USB Debugging is enabled on the device before booting it into bootloader, now plug in your phone again and let the drivers install WHILE your computer is offline, Go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Bootloader Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
Android Composite ADB Interface
1. Before proceeding, type "fastboot devices", the device should now also be detected on fastboot, now, type "fastboot reboot", and afterwards, enable "USB Debugging" on the Developer Options, then go your command prompt, then type "adb reboot recovery".
2. Now, now plug in your phone again and let the drivers install WHILE your computer is offline, now go to your Device Manager after the driver installation and you should see that there is a driver named "Android" with an exclamation mark.
3. Select the "Android" driver with an exclamation mark, then click "Update device driver", click "Browse my computer for driver software" then click "Let me pick from the list of devices on my computer", click Next, then click "Have Disk", now, remember the location path you copied earlier? Now paste that path (like C:\Users\Symphony\Desktop\latest_usb_driver_windows\usb_driver\) to the white bar under "Copy manufacturers files from:", overwrite the A:\ with your copied path then Browse, select the "android_winusb.inf" and click OK, now, select the "Android Composite ADB Interface", once the driver has been installed and the interface doesn't give errors such as "The device cannot start", then you're good to go.
2. Applying the recovery/custom recovery
A. Open up your phone and ensure that USB Debugging has been enabled, now, open up your command prompt just like in Step 1 in Unlocking the Bootloader and type "adb reboot bootloader"
B. Next up, type "fastboot flash recovery path/to/recovery.img", substitute the path/to/ with the actual location of your recovery, and please make sure that the name of the image is "recovery.img"! Or else it will not overwrite/update the recovery, you can also put your recovery.img directly within the platform-tools folder so that all you have to type is "fastboot flash recovery recovery.img" then press enter.
C. Once your done, reboot the phone and press Volume Up + Power at the same time, and the recovery will start. (You may want to do this else the recovery will be automatically removed and replaced with the stock one)
1C. For the stock recovery, once you press the combination, the phone will say "No command", at this point, hold your Power button and press Volume up one time to get into recovery.
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282 here is the link of the TWRP recovery, I encourage you to follow the steps mentioned in the post properly.
WARNING: The fix I provided below is now pushed here for 1 certain reason, before you try to root your phone and do everything else, you must decrypt your internal storage first and it is quite easy, first you must get the decrypt.zip linked in this thread (if the .zip cannot be found, I still have a copy of it), go to TWRP and do "format data", not Wipe Data! How so? Once you reboot to TWRP, it will show you the "Wipe" button, tap that, then the "Format Data" button should show up, this will require you to type in "yes" so type it in, then once it is done formatting, go back to the main TWRP screen, tap "Reboot", then "Reboot to Recovery", afterwards you must go to "Install" then proceed to install the "decrypt.zip", after that you can now flash .zip files from your internal storage too, but beware that you must do this every time you update your device!
3. Rooting your phone
A. To get started, install TWRP for your phone first.
B. Get the .zip file of Magisk/SuperSU so you can install them, the links are https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 and https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
C. Reboot your phone to recovery or just plug it in, open the command prompt again just like in the previous step and put "adb reboot recovery" without quotes.
D. Tap "Install" on your TWRP recovery and select the respective installation .zip file of your chosen root management app, and wait for it to finish.
1D. The .zip for both SuperSU and Magisk can be installed through "adb sideload", if incase you don't have an SD card! It may also work with fastboot as well but I need someone to confirm this.
E. When it's done, wipe the cache first, then reboot.
1E. If the root management app didn't appear in your phone after boot, just install the APK of it in the Play Store and check if root has been applied, if not, repeat step C and D again.
BONUS: It may be useful also to grab EdXposed or LSposed for Magisk and the link is here: https://forum.xda-developers.com/t/...or-of-xposed-oreo-pie-q-r-2020-07-19.4070199/ and here: https://forum.xda-developers.com/t/...e-magisk-module-edxposed-alternative.4228973/, please choose only one! You will use the normal Xposed if you're using a different root management app such as SuperSU, the link is here: https://forum.xda-developers.com/showthread.php?t=3034811
What this does is that if the app is an Xposed/EdXposed/LSposed framework module, any modifications it does to your phone will be based on memory only, it won't modify your phone directly which means your device will be clean, and if it incase the said modification bricks your phone, you can easily recover from it too!
BONUS 2: I also recommend getting the Busybox module from Magisk itself, it can easily be downloaded from the Magisk app, you will need this module if you want your root applications to work more efficiently and avoid errors, as most of them requires Busybox to work, don't use the Busybox installer apps on Play Store as they modify /system directly, only use it if you are using SuperSU.
4. Additional modifications
Once you've managed to root your phone and everything else, what I recommend you could do with your device is to get the following apps:
Titanium Backup - It has the ability to back up apps on your phone, and even its data! this app could do so much more than with what I just mentioned.
LSpeed - A root boosting app that has almost every root tweak packed into it, its really convenient to use! I do not recommend using Entropy tweaks as I heard it is a placebo.
Greenify - For me, this is the only legit battery saving app aside from LSpeed which also offers tons of battery saving features, it requires Xposed to have more options you have to buy it to gain full functionality
ROM Toolbox - This app pretty much contains everything a rooted user needs, such as a terminal and root-based file manager.
System app uninstaller (optional) - Just in case if you're planning to remove some bloatware (the list of it is below)
Root Browser - An alternative to ROM Toolbox, this root explorer is really popular and gets the job done without any interruptions.
Terminal emulator - This will allow you to enter various commands on your phone, like being able to reboot the phone without using any keys.
In order to make the phone as fluid as possible, just leave it with stock ROM installed, try to also use lite apps like Facebook Lite to reduce RAM and battery consumption.
Kernel Adiutor - Another great root application, it's like LSpeed but it doesn't automate tweaks, it instead allows you to modify most of it on your own, then it reapplies your tweaks every time your cellphone will boot up if you tap the "Apply on startup" switch. the link for the app is here: https://m.apkpure.com/kernel-adiutor-root/com.grarak.kerneladiutor
NOTE: Most of these apps can be found on the Play Store, and please don't install any more similar root boosting apps such as HEBF, scripts such as V6 Supercharger, or modifying files like build.prop, it is due to the fact that this will conflict with LSpeed, as LSpeed contains most of the tweaks that past scripts and apps provide, this will result in your phone slowing down a lot, Greenify will require Xposed Framework which is mentioned above on the Rooting section, the link to LSpeed is here https://github.com/Paget96/LSpeed, because the app has been removed from Play Store.
WARNING: The perf.zip https://forum.xda-developers.com/android/development/-t3935220 here, that was provided in Xiaomi Redmi Go forum section must be applied with extreme caution, you have to make a backup of your build.prop in /system, and build.prop + default.prop in /vendor for easy recovery, you can use ZipMe to easily make a backup for these files.
5. Stock ROM links
https://xiaomirom.com/en/rom/redmi-go-tiare-global-fastboot-recovery-rom/, this link so far provides all the ROMs (both recovery and fastboot) available for download on this phone, and they are actually light enough, so it will be easy to download them.
https://xiaomifirmwareupdater.com/archive/miui/tiare/ a new link I've found recently, this rom contains the .tgz format of the latest ROM for the Xiaomi Redmi Go, which could be used for fastboot and Mi Flash Tool, just search for the model and go for Global.
NOTE: Most of the ROMs for this phone provided on several sites, even on the actual Xiaomi website, has an invalid format of .zip, and doesn't contain a flashall script, as a result, Mi Flash Tool will never be able to use these ROMs, you could not also use adb sideload and fastboot for these ROMs, only the stock recovery of the phone could install the ROM, due to the links provided above finally giving the latest ROM versions for the phone, extracting the stock recovery is very easy now, you can do it yourself but if you need a link, tell me.
5A. Applying the stock ROM
This section will be divided into 2 sections, flashing the ROM through recovery, flashing the ROM through fastboot manually, or automatically with flash_all.bat
Stock recovery method.
A. Download the stock ROM with .zip format and put it into your SD Card.
B. Flash your recovery back to stock with the steps given above, boot into your stock recovery, then using your Power button and volume keys to navigate, select "Apply update from SD card".
C. Select the .zip file and wait for the update to finish.
D. The device will boot up automatically after, if not, just go back to the main menu of the recovery and select "Reboot system", enjoy!
Fastboot manual flashing method.
A. Ensure that you have prepared your device and computer for ADB, now grab the ROM given in this thread in .tgz format, and keep extracting the file until you see the files such as "flash-all.sh" after extraction, as you need to extract the .tgz ROM two times before you could use it properly.
B. Now go to the extracted folder of the stock ROM, go the "images" folder and copy the following image files: boot.img, system.img, recovery.img (make a backup of this file somewhere!), vendor.img, cache.img, userdata.img, persist.img, and splash.img.
C. Paste them to the extracted folder of your SDK Platform Tools where various .exe files are located such as "adb.exe", or in my case the location is "C:\Users\Symphony\Downloads\platform-tools_r29.0.4-windows\platform-tools".
D. Now open your command prompt on this directory, or Shift + Right click, then plug in your phone, now type "adb reboot bootloader" so your phone will go to bootloader, don't forget to enable "USB Debugging" and PTP connection mode before rebooting! (only applies to Windows 8/8.1, it may vary on Windows 7 but it is different on 10, no need for PTP connection mode, you can just turn on USB debugging and that's all)
E. Now, this is a little tricky, but try to follow me as much as you can, make sure first that you are detected with "fastboot devices", input the following commands that I will give so you can flash the ROM to your phone, now go to the command prompt and:
To flash the boot.img to your phone, put the command: "fastboot flash boot boot.img"
For the recovery, the command is: "fastboot flash recovery recovery.img"
For the system or main OS: "fastboot flash system system.img"
For cache: "fastboot flash cache cache.img"
For persist: "fastboot flash persist persist.img"
For the vendor or additional system files: "fastboot flash vendor vendor.img"
For data or apps: "fastboot flash userdata userdata.img"
For splash or probably boot animation: "fastboot flash splash splash.img"
D. After that, type "fastboot reboot", and enjoy!
Fastboot automatic flashing method (NEW!)
A. Extract the fastboot ROM 2 times as instructed, after getting the files, grab all the files and copy it to the directory of your platform tools where files such as "adb.exe" can be found, just copy all the files in there and that's all you have to do.
B. Open the "flash_all.bat" on Notepad and remove the following lines:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *tiare" || exit /B 1
Afterwards, save the .bat file, that should be ready to use now
C. As instructed above, you must also do "fastboot flashing unlock_critical" after unlocking your bootloader the normal way, this will act as your 2nd unlock command, without this, the flash_all.bat will not work as it should be.
D. Boot up your phone in fastboot mode, open up your adb devices and make sure that your phone is seen in "fastboot devices", once it does, type in "flash_all.bat" without any quotes and execute it, the command will now automatically flash everything without you doing anything else, it will also automatically reboot after doing so.
Bonus section:
1. TWRP-compatible stock ROM
For this part, in order for you to generate a TWRP-flashable stock ROM is by basically making it yourself, you have to make sure that your patch is latest, and its pretty much a good idea to just tick everything in the backup selection except for the recovery, as well as the cache as you don't need those.
Once you have it, go ahead and keep it somewhere safe but easy to find, so if case that you need to use it, you could get it immediately, this is extremely useful so please just do it, as of now, I've confirmed that only the /data backup was usable, but please try to confirm if other partition backups are working for you.
Certain custom ROMs that can boot up in this device could be flashed through TWRP though, and the links of them are provided here in this thread.
2. GSI, AOSP 9 and custom ROMs
The link for AOSP is provided here: https://forum.xda-developers.com/android/development/redmi-aosp-9-t3922192
The link for GSI is right here: https://forum.xda-developers.com/android/general/tested-gsi-redmi-t3924705
These images/ROMs can be applied with TWRP, just make sure to follow the steps mentioned in these posts to avoid inconvenience, don't forget to take precautions too! I haven't tried them, but so far I believe that these are stable to use.
There are also custom ROMs released for the device but I am lazy to link all of them, they can easily be found by going here: https://forum.xda-developers.com/tags/xiaomi-redmi-go/
Please take note that I haven't tested these custom ROMs yet and I most likely never will, since the stock ROM for the device is already good enough, you can comment here and tell me what custom ROMs are stable so I can link them here for future reference.
3. Current status
My phone is still working, yes! and it's still staying strong, updated to 2.25 using the fastboot method and it is still fast, the only issue currently is that SafetyNet is a lot more secure than before, so it will be impossible to use stuff like Google Pay for now.
I usually decided to lay low and just stay with my LSpeed, Kernel Adiutor and Greenify, all I had to do is to tinker with these apps and my phone just reached into a whole new level! The performance improvement is nice, that I didn't need to use a custom ROM anymore.
4. How to install a OTA update after rooting your device
Due to the changes made by Google on SafetyNet, and the fact that this device will always require you to wipe the device every update, it is pretty much the same, it doesn't matter anymore if you are certified or not, you will still receive an OTA update even if your device is not certified as long as you are using the stock ROM, you only won't be able to install it, and if you want to install the OTA update you must install it by flashing the updated fastboot ROM, I have links for it above, you can try installing the OTA updates yourself through the settings but you will still have to do a factory reset anyway, you have to also unroot also and revert to stock recovery, else the installation will fail, and your device may slower afterwards.
5. Bloatware you can safely remove (NEW!)
So, like I said above, as much as how lightweight the device is, there are still bloatware that you can remove if you really want, but it's only 3 of them:
Mi Video
Mint Browser
Mi Music
The rest such as Mi Share and Mint Launcher are also bloatware, you can remove them but to me they are useful so I didn't, do not remove the "Cleaner" app, if it however says something like "com.CleanMaster", you can try removing it but take caution as your Play Store may be removed along with it too.
Credits to everyone who made the apps/tools that I mentioned here! such as @topjohnwu for the Magisk, and @YasiR Siddiqui for the TWRP, @Paget96 for the awesome LSpeed app, @rovo89 for the Xposed Framework and many more, you guys totally rock!
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
Can you please elaborate all of what you've done so far? I will also ask you a few questions.
1. Is your phone usable with the platform tools? I mean with adb and such.
2. Did you try going into recovery and flashing stock ROM through there?
3. Is your phone being detected by "fastboot devices"? The fastboot mode of Redmi Go is its download mode, and i've provided the link for the stock ROM that's usable thru fastboot mode, as well as on how to apply it.
My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.
TheAngryGuitarist said:
Hello and thank you for this tutorial. I'd like to ask. Do You know a way where I can unlock the bootloader without permissions or oem unlock? I have a soft-bricked device and for me, there is no way I can get into the OS and manually switch the Oem unlock setting. I've tried different softwares, different adb commands, different region firmwares, still no luck. I can't also get into the the download mode. I mean, yeah, I get the "no command" screen but after pressing power button + up volume button my phone restarts into the fastboot mode and there is no way I can normally boot. It's looping to fastboot mode over and over...
Click to expand...
Click to collapse
TheAngryGuitarist said:
My phone is usable with adb and such, the recovery mode was not working, only the fastboot. I've tried flashing stock rom with the flash tool but I had no success with a bricked soft and a locked bootloader. I've finally fixed it by going into the edl mode by test point method then I flashed the stock rom, and I've fixed my problem this way. I couldn't unlock the bootloader manually from adb or the unlocker tool, but I've did it in the edl way.
Click to expand...
Click to collapse
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.
_XblackshadowX_ said:
Can you please elaborate the term "edl mode"?
Good job then, usually, before you modify the phone and start doing something crazy out of stock, your number one step is to really unlock the bootloader, and in order to make things more easier, you should allow your OEM to be unlocked through the developer options, after that you can now unlock the bootloader with fastboot.
Click to expand...
Click to collapse
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community! ?
TheAngryGuitarist said:
Yes, it's the emergency download mode. You use it when there is nothing you can do about the soft of your device. It automatically unlock the bootloader and you can flash the stock rom. Well, my problem was another. I did not tried to flash roms or recoveries with a locked bl. My phone automatically rebooted into the fastboot mode and from there I was not able to start my phone normally. I've tried rebooting fastboot from adb, unlock bl from adb, no success. I had to dissamembly the phone and make a short-circuit to the test points while slowly pushing in the mtp cable with the battery disconnected. Once I saw the Qualcomm driver on device manager I was able to flash the stock rom. You can search if you want to, for the test pins of this device. Btw, thank for your advice, you are really helpful to the community!
Click to expand...
Click to collapse
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.
_XblackshadowX_ said:
Woah, you really had to open the phone before doing it, that's an interesting method!
That part where your phone booted into fastboot was kind of scary, any ideas why it booted into fastboot in the first place? It has to be reported if incase, seems like a dangerous bug.
Click to expand...
Click to collapse
I'm not really sure if a malware caused this issue or a failed system update over-night.
TheAngryGuitarist said:
I'm not really sure if a malware caused this issue or a failed system update over-night.
Click to expand...
Click to collapse
I usually had failed system updates numerous times because when i install them, the phone has already been modified by a lot, and that's actually riskier.
That's why i recommend unrooting and putting back the stock recovery before updating first, still works on mine even with "Device is not certified" by Play Store.
The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?
_XblackshadowX_ said:
Did you try turning on USB Debugging on Developer Options? Did you try installing the USB drivers from Google?
Click to expand...
Click to collapse
Yeah, I've done everything you told, I also turned the connection mode to PTP also. Somehow it just not showing that android with an exclamation mark.
after that, I even tried to use the 15-second ADB installer. after installing that I tried to flash recovery but that just didn't do anything. After using that flashing command, I had the same stock recovery.
I'm really thankful you took the time to answer my question.
Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.
I am not able to flash TWRP on my redmi go
How to update the redmi go to the latest version without formatting/Factory Reset should I just follow Fastboot flashing method and if so which files should I just flash. Thank you
bhattinb said:
I unlocked the bootloader successfully.
In the setting up ADB step, I don't clearly understand. When I connect my device to the pc, no drivers are installing. And there is no driver named "Android" with an exclamation mark. But my device is getting recognized in "portable devices >> redmi go". I'm very new with adb it would be a lot of help.
I've attached the screenshot of my device manager,
Click to expand...
Click to collapse
Hi! sorry for the late reply, if this is the case then it's fine, you can just connect the device, open up adb tools, type adb devices and ensure that your USB debugging is on, and the device will connect immediately, at that point all you need is the adb driver for Fastboot
akki_007 said:
Help!! My device stuck on screen saying your system has been destroyed. What I had done is locked the bootloader using command fastboot oem lock then this happened. Now i can boot device in stock recovery and bootloader too but when i am trying to unlock bootloader it says device is lock and also i am not able to flash anything. Plz help.
Click to expand...
Click to collapse
oh no, but why lock your bootloader? you can try using a recovery ROM, you must have a spare SD Card within you, grab a recovery ROM, put it in your sd card then put it into the phone and use it on stock recovery, you should be able to apply it and boot back into the system, please update me
igpraan said:
I am not able to flash TWRP on my redmi go
Click to expand...
Click to collapse
you must have unlocked bootloader if you want to do so.
niknah said:
The TWRP linked here is for Pie 9, I couldn't get it to boot on my phone, it shows vertical lines.
This is the older version for Oreo 8...
https://forum.xda-developers.com/android/general/twrp-xiaomi-redmi-beta-t3918993
I formatted the phone from TWRP it so it was no longer encrypted.
Mounted the drive from TWRP and installed the "decrypt.zip" from the other TWRP...
https://forum.xda-developers.com/android/development/recovery-twrp-3-3-0-redmi-t3929282
Click to expand...
Click to collapse
that's strange, the TWRP I linked isn't giving me any vertical lines
The factory images are up my friends. Go pick what you need :good:
https://support.google.com/pixelphone/thread/24852169?hl=en
Added bonus: Here is a link to the January stock boot and magisk patched boot.img's
This is for the global build #QQ1B.200105.004 :good:
https://drive.google.com/file/d/1Dgh7w0r4ZzPZ7qOePhfADjPuLp-K84yO/view?usp=drivesdk
PS: I used stable magisk 20.2 to patch the boot.img
Dey Up Bruv...
Im downloading mine already <3
OTA is only 12MB.
Only 1st january, not 5th?
can confirm Jan update works with magisk root and ed_xposed. Thanks for updating us with the update availability!
Badger50 said:
The factory images are up my friends. Go pick what you need :good:
https://support.google.com/pixelphone/thread/24852169?hl=en
Added bonus: Here is a link to the January stock boot and magisk patched boot.img's
This is for the global build #QQ1B.200105.004 :good:
https://drive.google.com/file/d/1Dgh7w0r4ZzPZ7qOePhfADjPuLp-K84yO/view?usp=drivesdk
PS: I used stable magisk 20.2 to patch the boot.img
Click to expand...
Click to collapse
Hi, and thx.
But can u share a small how-to, for updating, step by step? Just wanna be sure that I on the right way.
lapapunk said:
Hi, and thx.
But can u share a small how-to, for updating, step by step? Just wanna be sure that I on the right way.
Click to expand...
Click to collapse
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.6. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt {See 6A} on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
6A. For Win 10 users. Open a command prompt by typing "cmd" in the search box, then open the prompt. You'll see C:\Users\<your name> with the flashing cursor. Then type "cd" then hit the space bar. Then drag and drop your completed platform-tools folder in the command line, and let it populate. Then hit enter, and now you can issue your fastboot commands :good:
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
When doing the above flashing use an A to C, not the supplied cable. If you're already in a flash failure with the supplied cable grab an A to C and flash again without doing a factory reset or taking any other actions to try and get it up; this will usually get it booting as if the first flash was successful.
Edit... I know you would have put it in there if you'd remembered Badg, it's hard to remember every little speed bump when whipping up a set of instructions like that.
@Badger50
Ok, thx.
But what about this guide? On my pixel 2xl this method worked great. Will it work on 4xl?
Badger50 said:
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.5. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
Click to expand...
Click to collapse
You're an absolute legend mate, thanks!!
lapapunk said:
@Badger50
Ok, thx.
But what about this guide? On my pixel 2xl this method worked great. Will it work on 4xl?
Click to expand...
Click to collapse
Nothing wrong with that either. It was written by Mr. Magisk himself. However, that is mostly for OTA's that I never use. I prefer updating by factory images :good:
krabman said:
When doing the above flashing use an A to C, not the supplied cable. If you're already in a flash failure with the supplied cable grab an A to C and flash again without doing a factory reset or taking any other actions to try and get it up; this will usually get it booting as if the first flash was successful.
Edit... I know you would have put it in there if you'd remembered Badg, it's hard to remember every little speed bump when whipping up a set of instructions like that.
Click to expand...
Click to collapse
Many thanks for reminding me of probably the biggest bug-a-boo problem plaguing the pixel line when it comes to updating or data transfer. Which is why I have several different cables! The P2XL was a great teacher for sure :good:
Do we flash global for TMobile?
Some_Ghost said:
Do we flash global for TMobile?
Click to expand...
Click to collapse
According to Google....yes :good:
After the January update, I no longer have call screening (automatic or otherwise). Not sure if related to being a GSuite user or not. Ugh...
Badger50 said:
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.5. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
Click to expand...
Click to collapse
you are a great help and i wish i could take you out for a beer or 5
Badger50 said:
In a nutshell: This is how I do it. Others MMV
1. Make sure platform-tools are up to date. The latest is 29.0.5. And use a USB A to USB C cable.
2. Download factory image, extract it, extract the image.zip, move boot.img to your phones internal storage.
3. Disable all magisk modules and substratum themes, remove face ID and reboot.
4. Patch the stock boot.img, and move the patched.img to your pc platform-tools folder, then turn phone off.
5. Move all your necessary factory image files to your platform-tools folder: bootloader, radio, the still zipped image.zip and the flash-all.bat file for Windows machines. Using notepad or whatever, edit the flash-all.bat file and remove the -w from the script, leaving a single space between the remaining words, save your edit.
6. Put phone in bootloader mode, and plug it into your pc. Open a command prompt on your platform-tools folder, type in: fastboot devices. If your device is recognized with it's ID, your good to go. Then, what I do is go into my platform-tools folder and double click the flash-all.bat file to start the process. Let it finish, and let your device boot up.
7. Once it boots ok with the update, turn phone off, and go into bootloader mode. Connect to pc, and fastboot the patched boot.img to both slots with..
fastboot flash boot magisk_patched.img --slot=all
And let it boot up with root.
8. Then start enabling your magisk modules a couple at a time. Be warned, sometimes, not all magisk modules play nicely with monthly updates, so take it slow. Luckily, January is cool with the @Tulsadiver mods, and the Active Edge mods from what I've seen.
9. And there ya go. Ok....so it was a little bigger than a nutshell!
Click to expand...
Click to collapse
What should I do when the cmd window comes to "fastboot: error: failed to extract 'android-info.txt': iteration ended" as shown in the attachment.
And the process stops.
howardfok said:
What should I do when the cmd window comes to "fastboot: error: failed to extract 'android-info.txt': iteration ended" as shown in the attachment.
And the process stops.
Click to expand...
Click to collapse
Hard to say exactly since i've never seen that error. Did you follow my guide to the letter?
Is this the first time this has happened?
Are you using power shell commands?
Are your platform-tools up to date?
Have you tied different USB A to USB C cables and ports?
More info would be helpful :good:
Badger50 said:
Hard to say exactly since i've never seen that error. Did you follow my guide to the letter?
Is this the first time this has happened?
Are you using power shell commands?
Are your platform-tools up to date?
Have you tied different USB A to USB C cables and ports?
More info would be helpful :good:
Click to expand...
Click to collapse
Yes, I followed your guide and the cmd window worded well at the previous procedure and showed several [ok] but stuck at this point.
I doubled clicked 'flash-all.bat' file rather than used power shell.
The platform-tools is up to date since it was downloaded today.
I have not tried another cable. The cable may work well because I used this to unlock bootloader and root the device last month.
BTW, should I re-zip the replaced boot.img (Patch from Magisk) and other .img files (from the full image) to get a new zip file before flashing?
howardfok said:
Yes, I followed your guide and the cmd window worded well at the previous procedure and showed several [ok] but stuck at this point.
I doubled clicked 'flash-all.bat' file rather than used power shell.
The platform-tools is up to date since it was downloaded today.
I have not tried another cable. The cable may work well because I used this to unlock bootloader and root the device last month.
BTW, should I re-zip the replaced boot.img (Patch from Magisk) and other .img files (from the full image) to get a new zip file before flashing?
Click to expand...
Click to collapse
I would try a different cable and port first.
Don't worry about the patched boot.img until you have a successful flash of the factory image, and your phone boots up first. The secondary image.zip within the factory image definitely needs to remain zipped and in your platform-tools tools folder. The installation script needs to extract it so it can be flashed. This may be why your getting the error if this is the case.
As a OnePlus 9 user who likes to root their phone mainly to allow Network Signal Guru to work (as well as a few other root things like AdAway) I had been trying to extract the boot.img the same way as I had done with a OnePlus 7T using Payload Dumper for Windows. However it looks like Payload Dumper has issues with extracting xx.img files (including boot.img) if the payload.bin file is bigger than 4.3 GB in size. So I've been looking to see if another method was possible that would work for our OnePlus 9 ROMs that are above this file size. As I use Linux Mint as my usual desktop OS & only fall back onto Windows for stuff that'll only run on that OS, I went to have a look to see if something could be done under Linux. Turns out there is an old thread elsewhere on XDA that almost nearly provides what is needed for this, and I thought I would gives details here that should work for the time of this post (March 2023).
This not only extracts the boot.img to patch in Magisk, but also extracts other xx.img files as well.
I'm using Linux Mint 21.1, but I'd assume that this will also work for similar Ubuntu builds or anything that is based on Debian.
Obligatory disclaimer: The following instructions I'm giving below have worked well for me several times in the past, however I am in no way responsible for screwing up or damaging your phone if you try and follow what I've written below. In extreme cases, a bad flash may require using the OnePlus MSM tool to completely reflash your phone. Back up anything important first before doing any of the following!
1. You will need to ensure that you have downloaded packages to be able to do adb & fastboot from the command line. You can check by running the following commands - if it's already installed with the latest versions, the terminal interface will let you know...
Code:
sudo apt install adb
Code:
sudo apt install fastboot
2. You will need to go to your software manager in LM21.1 and install both Python 3 & the Python Protobuf compiler. Just search for "Python 3" & "Protobuf-compiler" in the software manager and the first option for each search is what you should need - if they are not installed, install them.
3. Create a read/writable directory that will hold your ROM that you've just downloaded & other files that I'll mention soon. I just use a folder calls "ROM" in my Downloads folder (e.g. /home/lawhec/Downloads/ROM ), but you can choose wherever you want that suits you.
4. If you have not done so already, make sure you have the FULL package of your OnePlus 9 ROM downloaded. As of right now (March 2023) it seems the best way is to download the package using the Oxygen Updater app which is available on Google Play - more info available at oxygenupdater.com - just download the ROM to your phone and transfer it on to your computer into the folder you've created for it.
5. Download and save the following two Python scripts/files ("Right click" & "Save Link As") into the folder you have just created for your ROM (all credit to Gregory Cyxx at github.com/cyxx )...
https://raw.githubusercontent.com/c...payload/master/extract_android_ota_payload.py
https://raw.githubusercontent.com/cyxx/extract_android_ota_payload/master/update_metadata_pb2.py
6. Make sure in your file browser (Nemo in my case as it is the default for LM21.1 Cinammon, yours may differ) the window is open in the ROM folder that contains the two Python scripts above that you've just downloaded as well as a ROM package (ZIP file) you've downloaded (in my case from Oxygen Updater mentioned in step 3). Create a new folder for the extracted images to be written to - in my case I just call the folder "output" which is located at "/home/lawhec/Downloads/ROM/output" but again you can call it what you wish.
7. After you've created your output folder, in your ROM directory in the file manager window right-click on your mouse in a white or free space and select "Open in Terminal" - a command terminal will pop up defaulting to your directory.
8. In the command terminal, type the following command and press enter/return...
Code:
sudo python3 extract_android_ota_payload.py <<Your ROM.zip>> <<Your Output Directory>>
...for example, in my case the command would be either...
Code:
sudo python3 extract_android_ota_payload.py LE2113_11_F-75.zip output
...or for handiness you can type "sudo python3 extract_android_ota_payload.py " (remember to leave a space) and simply drag the ROM zip file to the command terminal, press space and then drag the output foler to the terminal line, which will look like in my case...
Code:
sudo python3 extract_android_ota_payload.py '/home/lawhec/Downloads/ROM/LE2113_11_F-75.zip' '/home/lawhec/Downloads/ROM/output'
...this will now run the python script you downloaded earlier that will begin extracting the ROM you've specified and will output all relevant xx.img files into your output folder, including the one we want, "boot.img" - there is no need to extract paylod.bin beforehand, the script will automatically do this for you. Once all xx.img files have been extracted the script will stop, depending on your computer this will take anything from 1-5 minutes, maybe longer on some very old or low spec'd computers - but just let it run its course. Once it is done you can then close the terminal window.
9. Now with the boot.img we've extracted, transfer this file on to your phone (the Downloads folder is usually a good choice). Now open Magisk and patch the boot.img file - once this has been completed, it'll generate a patched boot.img file named something like "magisk_patched-25200_12345.img" - copy and paste this patched boot image back on to your computer (into the folder you've been using will be fine here).
10. If your OnePlus 9 phone is connected to your computer via USB cable, disconnect it now. Then shutdown your phone into a power-off state then reboot it into fastboot mode - this can be done by holding down the volume up & down buttons, then holding down the power button and keep holding down all three buttons until you feel a vibration from your phone. Your OnePlus 9 should then boot into fastboot mode.
11. Now reconnect your OnePlus 9 to your computer via the USB cable and then open up a new display terminal (preferably by right-clicking in the file window of the directory where you saved your Magisk patched boot.img file). Enter the following...
Code:
fastboot devices
...you should then get a line featuring a block of numbers that should match the serial number that is displayed on your phone's display, followed by "fastboot", for example...
Code:
85f53405 fastboot
...if you get anything else, double check your connections at try again - if more than one device is displayed, disconnect the and try again to make sure that only one device is listed. It might also be the case that you don't have the proper drivers installed on your computer for your phone though in my case LM21.1 automatically recognises my phone, so I'm not of any direct help here I'm afraid for this, sorry.
12. Now you will be flashing your patched boot.img to your phone - this is where things can be a little nervous though as long as you do everything right nothing should really go wrong. Type the following into the command terminal, assuming you did so by opening a command terminal from the folder your Magisk Patched boot.img file is located...
Code:
fastboot flash boot <<Magisk Patched boot.img>>
...for example in my case the command line would be...
Code:
fastboot flash boot magisk_patched-25200_12345.img
...otherwise you will need to provide the location of where your patched boot.img is, so in this case...
Code:
fastboot flash boot '/home/lawhec/Downloads/ROM/magisk_patched-25200_12345.img'
...either way, your phone will now be in the process of getting its boot image replaced with the one patched by Magisk. This should take no more than a few seconds and that should be it done! You can then close the terminal window again.
13. Once you've patched the boot image, disconnect the phone from the USB cable to the computer and make sure that the screen on your mobile says "START" in green at the top, if it doesn't, use the volume keys to change this. Then just simply press the power button and your phone will now reboot, this can take a little bit longer than before as your phone's firmware has changed so give it time - (however if it takes longer than 10 minutes or so you might have a problem here) - once your home screen becomes available, give it a few seconds once you've entered before selecting the Magisk app. Once you've done this, Magisk should say that it is installed however to double check, use an app that requires root permissions either to work (e.g. Network Signal Guru) or to do additional things, like a simple root checker app that you can download from wherever you download your apps. If everything is good, then you've rooted your OnePlus 9!
Notes: This process will probably work for other firmware packages for various phones where the boot.img can be extracted to be patched by Magisk and then flashed via fastboot (assuming the bootloader is unlocked) which includes the OnePlus 7T's stock firmware, but I can give no guarantees for this. Once again, try at your own risk.
I would suggest to boot the magisk patched image and then doing a direct install from the app instead of flashing it directly. This way you can use the "Restore images" feature in the Magisk app that can be useful when doing incremental update.
Thank You for thinking of Us Linux Users !
Attempted to update to LOS 20 via ADB, and now my touch screen will not work. All the remedies here require a Windows system for the MSM tool, which I do not have...
barguybrady said:
Thank You for thinking of Us Linux Users !
Attempted to update to LOS 20 via ADB, and now my touch screen will not work. All the remedies here require a Windows system for the MSM tool, which I do not have...
Click to expand...
Click to collapse
You have a computer you can install windows on another partition it's not like you don't have the ability to use msm
stez827 said:
You have a computer you can install windows on another partition it's not like you don't have the ability to use msm
Click to expand...
Click to collapse
no comment
barguybrady said:
Yup.
Just gonna spend another 4 or 5 hours prepping a drive to somehow install windows just to fix a phone.
Maybe - No....
Click to expand...
Click to collapse
It does not take that long as a Linux user who has had to install for that exact reason it took maybe an hour or 2
lawhec said:
As a OnePlus 9 user who likes to root their phone mainly to allow Network Signal Guru to work (as well as a few other root things like AdAway) I had been trying to extract the boot.img the same way as I had done with a OnePlus 7T using Payload Dumper for Windows. However it looks like Payload Dumper has issues with extracting xx.img files (including boot.img) if the payload.bin file is bigger than 4.3 GB in size. So I've been looking to see if another method was possible that would work for our OnePlus 9 ROMs that are above this file size. As I use Linux Mint as my usual desktop OS & only fall back onto Windows for stuff that'll only run on that OS, I went to have a look to see if something could be done under Linux. Turns out there is an old thread elsewhere on XDA that almost nearly provides what is needed for this, and I thought I would gives details here that should work for the time of this post (March 2023).
This not only extracts the boot.img to patch in Magisk, but also extracts other xx.img files as well.
I'm using Linux Mint 21.1, but I'd assume that this will also work for similar Ubuntu builds or anything that is based on Debian.
Obligatory disclaimer: The following instructions I'm giving below have worked well for me several times in the past, however I am in no way responsible for screwing up or damaging your phone if you try and follow what I've written below. In extreme cases, a bad flash may require using the OnePlus MSM tool to completely reflash your phone. Back up anything important first before doing any of the following!
1. You will need to ensure that you have downloaded packages to be able to do adb & fastboot from the command line. You can check by running the following commands - if it's already installed with the latest versions, the terminal interface will let you know...
Code:
sudo apt install adb
Code:
sudo apt install fastboot
2. You will need to go to your software manager in LM21.1 and install both Python 3 & the Python Protobuf compiler. Just search for "Python 3" & "Protobuf-compiler" in the software manager and the first option for each search is what you should need - if they are not installed, install them.
3. Create a read/writable directory that will hold your ROM that you've just downloaded & other files that I'll mention soon. I just use a folder calls "ROM" in my Downloads folder (e.g. /home/lawhec/Downloads/ROM ), but you can choose wherever you want that suits you.
4. If you have not done so already, make sure you have the FULL package of your OnePlus 9 ROM downloaded. As of right now (March 2023) it seems the best way is to download the package using the Oxygen Updater app which is available on Google Play - more info available at oxygenupdater.com - just download the ROM to your phone and transfer it on to your computer into the folder you've created for it.
5. Download and save the following two Python scripts/files ("Right click" & "Save Link As") into the folder you have just created for your ROM (all credit to Gregory Cyxx at github.com/cyxx )...
https://raw.githubusercontent.com/c...payload/master/extract_android_ota_payload.py
https://raw.githubusercontent.com/cyxx/extract_android_ota_payload/master/update_metadata_pb2.py
6. Make sure in your file browser (Nemo in my case as it is the default for LM21.1 Cinammon, yours may differ) the window is open in the ROM folder that contains the two Python scripts above that you've just downloaded as well as a ROM package (ZIP file) you've downloaded (in my case from Oxygen Updater mentioned in step 3). Create a new folder for the extracted images to be written to - in my case I just call the folder "output" which is located at "/home/lawhec/Downloads/ROM/output" but again you can call it what you wish.
7. After you've created your output folder, in your ROM directory in the file manager window right-click on your mouse in a white or free space and select "Open in Terminal" - a command terminal will pop up defaulting to your directory.
8. In the command terminal, type the following command and press enter/return...
Code:
sudo python3 extract_android_ota_payload.py <<Your ROM.zip>> <<Your Output Directory>>
...for example, in my case the command would be either...
Code:
sudo python3 extract_android_ota_payload.py LE2113_11_F-75.zip output
...or for handiness you can type "sudo python3 extract_android_ota_payload.py " (remember to leave a space) and simply drag the ROM zip file to the command terminal, press space and then drag the output foler to the terminal line, which will look like in my case...
Code:
sudo python3 extract_android_ota_payload.py '/home/lawhec/Downloads/ROM/LE2113_11_F-75.zip' '/home/lawhec/Downloads/ROM/output'
...this will now run the python script you downloaded earlier that will begin extracting the ROM you've specified and will output all relevant xx.img files into your output folder, including the one we want, "boot.img" - there is no need to extract paylod.bin beforehand, the script will automatically do this for you. Once all xx.img files have been extracted the script will stop, depending on your computer this will take anything from 1-5 minutes, maybe longer on some very old or low spec'd computers - but just let it run its course. Once it is done you can then close the terminal window.
9. Now with the boot.img we've extracted, transfer this file on to your phone (the Downloads folder is usually a good choice). Now open Magisk and patch the boot.img file - once this has been completed, it'll generate a patched boot.img file named something like "magisk_patched-25200_12345.img" - copy and paste this patched boot image back on to your computer (into the folder you've been using will be fine here).
10. If your OnePlus 9 phone is connected to your computer via USB cable, disconnect it now. Then shutdown your phone into a power-off state then reboot it into fastboot mode - this can be done by holding down the volume up & down buttons, then holding down the power button and keep holding down all three buttons until you feel a vibration from your phone. Your OnePlus 9 should then boot into fastboot mode.
11. Now reconnect your OnePlus 9 to your computer via the USB cable and then open up a new display terminal (preferably by right-clicking in the file window of the directory where you saved your Magisk patched boot.img file). Enter the following...
Code:
fastboot devices
...you should then get a line featuring a block of numbers that should match the serial number that is displayed on your phone's display, followed by "fastboot", for example...
Code:
85f53405 fastboot
...if you get anything else, double check your connections at try again - if more than one device is displayed, disconnect the and try again to make sure that only one device is listed. It might also be the case that you don't have the proper drivers installed on your computer for your phone though in my case LM21.1 automatically recognises my phone, so I'm not of any direct help here I'm afraid for this, sorry.
12. Now you will be flashing your patched boot.img to your phone - this is where things can be a little nervous though as long as you do everything right nothing should really go wrong. Type the following into the command terminal, assuming you did so by opening a command terminal from the folder your Magisk Patched boot.img file is located...
Code:
fastboot flash boot <<Magisk Patched boot.img>>
...for example in my case the command line would be...
Code:
fastboot flash boot magisk_patched-25200_12345.img
...otherwise you will need to provide the location of where your patched boot.img is, so in this case...
Code:
fastboot flash boot '/home/lawhec/Downloads/ROM/magisk_patched-25200_12345.img'
...either way, your phone will now be in the process of getting its boot image replaced with the one patched by Magisk. This should take no more than a few seconds and that should be it done! You can then close the terminal window again.
13. Once you've patched the boot image, disconnect the phone from the USB cable to the computer and make sure that the screen on your mobile says "START" in green at the top, if it doesn't, use the volume keys to change this. Then just simply press the power button and your phone will now reboot, this can take a little bit longer than before as your phone's firmware has changed so give it time - (however if it takes longer than 10 minutes or so you might have a problem here) - once your home screen becomes available, give it a few seconds once you've entered before selecting the Magisk app. Once you've done this, Magisk should say that it is installed however to double check, use an app that requires root permissions either to work (e.g. Network Signal Guru) or to do additional things, like a simple root checker app that you can download from wherever you download your apps. If everything is good, then you've rooted your OnePlus 9!
Notes: This process will probably work for other firmware packages for various phones where the boot.img can be extracted to be patched by Magisk and then flashed via fastboot (assuming the bootloader is unlocked) which includes the OnePlus 7T's stock firmware, but I can give no guarantees for this. Once again, try at your own risk.
Click to expand...
Click to collapse
If Using the t-Mobile Variant - LE2117 - we are Unable to Install any OTA Updates with OxygenUpdater, and are promptly warned of this limitation upon install. Nevertheless, I forged ahead and,
Following this Method, I downloaded a LE2115_11_F.17.zip, and proceeded to use your helpful .py scripts to extract the boot.img file, and Flash it - promptly sending me to a Qualcomm CrashDump mode.
Having a chance to MSM back to "stock" LE2117 - 11.2.2.2 LE54CB, I am wondering if I should just let the t-Mobile Update, through "Settings >> System >> System update" to Update the Stock ( bloated !? ) OS with all that are available,
Then attempt to Extract a boot.img and Magisk patch it ?
Any Advice?
TIA