Database Info

LG Urbane 2nd Edition Verizon W200V , Android Wear 2.0 Side load OTA Guide

Hey All,
This is my first ever post on XDA ,So forgive me if I have not done a good job. I will try my best to provide sufficient details on how to upgrade LG urbane 2nd Edition Verizon model watch to Android wear 2.0 from Android wear 1.5
Known Issues : **********Android Pay is not working as reported by few users ***********
YOU FLASH THESE FILES AT THE RISK OF BRICKING YOUR DEVICE. I AM SIMPLY PROVIDING THEM AND BEAR NO RESPONSIBILITY FOR ANY SUBSEQUENT DAMAGE FROM FLASHING THESE FILES. ALL DATA ON THE PHONE WILL BE ERASED.
Prerequisites:
[*]LG Urbane 2nd Edition Verizon Model (W200V) for all other model you should have received a OTA by now , Please check OTA software updates on you watch.
[*]ADB tools ( Minimal is also sufficient) google for files and install in your computer , in my case I did it in "C:\adb".
[*]twrp-3.1.1.0 (twrp-3.1.1.0.img) recovery Image Copy of the file :- https://drive.google.com/drive/folders/0Bzk4DPXefDhrRzl3ckh6Uzhad1k
[*]Android Wear 2.0 OTA udpate Copy of the file :- [*]Modified file link http://www.filehosting.org/file/details/699795/lg2.zip or original file https://android.googleapis.com/pack.../af88cfbc96ad65e7b728e27c2decbdc6fb0e08e8.zip
[*]notepad++ (to edit updater-script), You can use Notepad as well.
1)perform factory reset on your watch just to be on safer side.
**update** Few users have reported that they have faced error while flashing due to buggy USB cable and they could successfully overcome the error by holding the cable to the watch and making sure the cable is fully in contact with the watch while flashing .**Update**
2)now we need to modify the OTA update file to work with Verizon model W200V ( skip this step if you have downloaded modified zip file and jump to 3rd step)
unzip the 'af88cfbc96ad65e7b728e27c2decbdc6fb0e08e8.zip" downloaded earlier and Browse the folder Edit file (updater-script) the file can be fount in the below path in my case."C:\ADB\af88cfbc96ad65e7b728e27c2decbdc6fb0e08e8\META-INF\com\google\android\updater-script". Use Notepad ++ and open the file and Remove 2 first rows,The file should start from "ui_print...", I used Note++ to edit the file and saved, as mentioned earlier you can use notepad as well.
Now Zip All files And name LG2.zip(Note : don't put all the files into a single folder and then zip, The zip should contain "META-INF" and other files) and place it in "C:\ADB\LG2.zip" for easier navigation in Cmd. (this file can be downloaded using above link Modified file")
3)next Connect your LG Urbane 2nd Edition watch to Computer and Enable ADB Debugging On watch (Settings-About-Tap about 8 times on "Build Number" and now go back to Setting and scroll down you should see new options "Developer Options" , Tap on "Developer Options" - and "ADB Debugging" select "Enable always from this computer" or something like that !!)
4)Now Check if your device has a connection to your computer using ADB tools
now on your computer under "Run" , type Cmd, this will bring windows command prompt.
Open Cmd in Windows and browse to ADB tools folder in my case I have placed ADB tools and all required files under "C:\abd"
Type "adb devices"
your device should show up under "List of devices attached"
Once device is found by computer we have to push the TWRP recover image to phone , To make life easy , I have downloaded all the above mentioned files to "C:\adb" folder
"adb push twrp-3.1.1.0 /sdcard/"
later boot into bootloader
"adb reboot bootloader"
Unlock bootloader
"fastboot oem unlock"
5)Now flash TWRP recovery (because we will be changing/modifying the original the OTA update file, stock recovery will fail to verify signature)
"fastboot flash recovery twrp-3.1.1.0.img"
boot to recovery to perform OTA side load
"fastboot reboot recovery"
Now you should see TWRP recovery welcome page,Allow read and write partition permission in TWRP.
6)now on your phone you should be in TWRP Main screen , press Install and you will find option to adb Sideload select that option and you will be presented with a option to wipe Dalvik and Wipe Cache , Select that and now go back to your cmd and type below code.
"adb sideload lg2.zip"
Now sit back and relax , The system will starts loading Android Wear2.0 to your verizon LG urbane 2nd edition watch (W200V) and once the process is finished , reboot to system.
1st boot will take some time , Have patience !! after all you have done ever thing right till now. (approx 5-10 mins, sometimes 15 mins)
Now your watch has Android wear 2.0 , enjoy.
Initially it might feel the OS is slow but allow the OS to settle down after that its snappy and the battery backup is also good in my opinion.
If you want to restore Stock recovery image just in case if you don't like TWRP, then
download the below targz file and extrat recovery.img file , LG Urbane 2 stock recovery image.
Link ,
enable ADB options under settings similar what we performed earlier.
1) Boot into bootloader
"adb reboot bootloader"
Stock Android wear 1.5 for LG Urbane 2nd Edition LTE(extract the file and copy recovery.img file to your folder , https://storage.googleapis.com/andr...wear-preview/nemo-mfd18l-factory-3faf6f2d.tgz (The file extension is */tgz(targz) , use 7zip application to extract the files and you will see recovery.img file .
Place a copy of recovery.img in "C:\adb\recovery.img"
"fastboot flash recovery recovery.img"
You can also Lock Bootloader to avoid the Notification at each boot.
"fastboot oem lock"
To get back to original android watch wear 1.5
if you don't like Android wear 2.0 use the below link and follow instruction to revert back to Android wear 1.5.
Stock Android wear 1.5 for LG Urbane 2nd Edition LTE , https://storage.googleapis.com/andr...wear-preview/nemo-mfd18l-factory-3faf6f2d.tgz (The file extension is */tgz(targz) , use 7zip application to extract the files.
Extract the *.tgz(targz) into your folder ("C:\adb")
Perform a "fastboot oem unlock", then run "flash-all.bat". Afterwards, you can "fastboot oem lock". This should restore you back to 1.5, where you need to take 1 OTA (from June 2016 Patch to December 2016 Patch).
Thanks All,

Missed something
Tried a thousand times. Not working **update** Looks like maybe It was just a buggy USB. I held it to the watch while flashing and it finally worked! I'm curious to hear anyone else's experiences with this cause it seems buggy but what would you expect? My apologies ty!

Has anyone other than the original poster tried this guide and been successful?

Thxfctr said:
Tried a thousand times. Not working
Click to expand...
Click to collapse
Are you getting any specific error ?

djdubd said:
Has anyone other than the original poster tried this guide and been successful?
Click to expand...
Click to collapse
It does work I had problems but I think holding the USB to the watch helps. I tried it a lot but it was worth it. Suck it verizon!

Thxfctr said:
Tried a thousand times. Not working **update** Looks like maybe It was just a buggy USB. I held it to the watch while flashing and it finally worked! I'm curious to hear anyone else's experiences with this cause it seems buggy but what would you expect? My apologies ty!
Click to expand...
Click to collapse
I am Glad finally it worked for you!!

suresh.chikkanna said:
I am Glad finally it worked for you!!
Click to expand...
Click to collapse
Ty! I think my USB connector is just a bit jinky.

I'm going to give this a try soon, everything working like lte, messages+, and phone?

Almost got it working
Followed all the directions and all seemed to work ok without errors. However, on startup now the watch is stuck on the startup splash screen (the animated google logo, has stayed there for hours). Can still access fastboot but unable to connect via ADB since the OS is not starting fully.
I also tried to restore back to 1.5 but since i can only access fastboot, my only option is to sideload but wont work with the TGZ link above.
Anyone have any ideas? or the zip file I could use to sideload the stock Wear1.5?
Thanks

Just making sure !! Try force restarting the watch by holding power button.
Did you reset the watch before sideloading ?
On android wear 1.5 use 7zip and unzip the tgz file and browse the folder till you see flashall bat file and run the same in bootloader. I have tried it and it works. Let us know if your still facing issues.

Locked /data won't allow sideload.
Hi, I've installed twrp, but it fails to sideload LG2.zip as the /data can't be mounted as it is encrypted. The TWRP doesn't have a format option for the /data partition so I can't reformat it to delete the encryption. So I'm stuck in TWRP.

Gphoton31 said:
Hi, I've installed twrp, but it fails to sideload LG2.zip as the /data can't be mounted as it is encrypted. The TWRP doesn't have a format option for the /data partition so I can't reformat it to delete the encryption. So I'm stuck in TWRP.
Click to expand...
Click to collapse
I had similar issue initially , had to restore back to 1.5 and then clean all the data and then sideload 2.0 back. Try that and let us know if that worked.

You are the man! That worked
Installed recovery.img bootloader, then ran the 1.5 bat file, then reinstalled twrp. /data unlocked and mounted, sideloaded 2.0. You turned my brick back into a watch. Thank you very much.

suresh.chikkanna said:
Just making sure !! Try force restarting the watch by holding power button.
Did you reset the watch before sideloading ?
On android wear 1.5 use 7zip and unzip the tgz file and browse the folder till you see flashall bat file and run the same in bootloader. I have tried it and it works. Let us know if your still facing issues.
Click to expand...
Click to collapse
Thanks.
I made sure to reset before force restart and reset before sideloading. Still having some trouble with the 1.5 reset though.
In bootloader, which option to I select for flashall to work? ADB Devices can't see it and if i just run from bootloader home screen i get , <waiting for any device>. Same thing in TWRP.
Thanks again for your help
[Note for other users unfamiliar with this process & having similar problems - you'll have to unzip the source file, then unzip "output" to extract all the files... tooke me a few attempts to realize i missed a step!]

Solved flash-all not working
OzzieJez said:
Thanks.
I made sure to reset before force restart and reset before sideloading. Still having some trouble with the 1.5 reset though.
In bootloader, which option to I select for flashall to work? ADB Devices can't see it and if i just run from bootloader home screen i get , <waiting for any device>. Same thing in TWRP.
Thanks again for your help
[Note for other users unfamiliar with this process & having similar problems - you'll have to unzip the source file, then unzip "output" to extract all the files... tooke me a few attempts to realize i missed a step!]
Click to expand...
Click to collapse
As with some other users the cable connection seemed to be causeing me some problems. I used a different USB port and held the connector against the watch and flashing to 1.5 worked this time.
---------- Post added at 06:37 PM ---------- Previous post was at 06:05 PM ----------
OzzieJez said:
Thanks.
I made sure to reset before force restart and reset before sideloading. Still having some trouble with the 1.5 reset though.
In bootloader, which option to I select for flashall to work? ADB Devices can't see it and if i just run from bootloader home screen i get , <waiting for any device>. Same thing in TWRP.
Thanks again for your help
[Note for other users unfamiliar with this process & having similar problems - you'll have to unzip the source file, then unzip "output" to extract all the files... tooke me a few attempts to realize i missed a step!]
Click to expand...
Click to collapse
As with some other users the cable connection seemed to be causeing me some problems. I used a different USB port and held the connector against the watch and flashing to 1.5 worked this time.

Gphoton31 said:
Installed recovery.img bootloader, then ran the 1.5 bat file, then reinstalled twrp. /data unlocked and mounted, sideloaded 2.0. You turned my brick back into a watch. Thank you very much.
Click to expand...
Click to collapse
I am really happy for you.

OzzieJez said:
Thanks.
I made sure to reset before force restart and reset before sideloading. Still having some trouble with the 1.5 reset though.
In bootloader, which option to I select for flashall to work? ADB Devices can't see it and if i just run from bootloader home screen i get , <waiting for any device>. Same thing in TWRP.
Thanks again for your help
[Note for other users unfamiliar with this process & having similar problems - you'll have to unzip the source file, then unzip "output" to extract all the files... tooke me a few attempts to realize i missed a step!]
Click to expand...
Click to collapse
Flash the original recovery.img extracted from the .tgz file and try again it should work.
For ADB access in TWRP use sideload using ADB option .

So will android pay work now with this

B
OzzieJez said:
Thanks.
I made sure to reset before force restart and reset before sideloading. Still having some trouble with the 1.5 reset though.
In bootloader, which option to I select for flashall to work? ADB Devices can't see it and if i just run from bootloader home screen i get , <waiting for any device>. Same thing in TWRP.
Thanks again for your help
[Note for other users unfamiliar with this process & having similar problems - you'll have to unzip the source file, then unzip "output" to extract all the files... tooke me a few attempts to realize i missed a step!]
Click to expand...
Click to collapse
I think I am having the same issue as you. I was sideloading 2.0 as instructed and I think I had a bad cable connection. I am now stuck with no wear operating system at all. When I start my phone it only stays on LG boot screen with the unlock icon on the bottom. My computer is now unable to recognize the device because I cannot get into settings to turn on ADB Debugging. If I follow the same steps as you can I sideload wear 1.5 and update via boot loader screen?

I think I am having the same issue as you. I was sideloading 2.0 as instructed and I think I had a bad cable connection. I am now stuck with no wear operating system at all. When I start my phone it only stays on LG boot screen with the unlock icon on the bottom. My computer is now unable to recognize the device because I cannot get into settings to turn on ADB Debugging. If I follow the same steps as you can I sideload wear 1.5 and update via boot loader screen?

How to unroot, lock bootloader and go back to stock?

For background, I have Verizon pixel 2 and am using a Mac.
I went down a massive rabbit hole last night reading through these forums and all the posts and was able to unlock bootloader, flash the January OTA and then root by doing the modified boot file with magisk. (interestingly enough the booting into recovery gives me red ! Over a dead Android and I could not load the OTA that way, nor did the adb sideload OTA comand work either, I had to push the extracted walleye img and then the zip file as discussed in one of the steps in some other thread here)
So anywho, in the end I now have a phone that gives me 2 errors when it reboots, one for unlocked bootloader and another for root telling me something is wrong with my phone and i should contact the manufacturer (which I read on here is normal), but my biggest issue is that my ADT alarm app doesn't work anymore (even if i check it off for hide in magisk). I feel like the root is just not worth it for me and I want to revert to completely stock image, even if it resets my phone and I have to re back everything up all over again like did when i had to do the unlocking of the boot loader.
So -- What are the steps I should take?
1)uninstall magisk from magisk manager?
2)delete magisk manager?
The above will unroot me, correct?
3)Do I push the stock boot image file onto the phone?
4) do I have to repush the latest OTA walleye image and zip file onto the phone again?
5) do I then do the adb reboot and do the flashing lock command (same command i did to unlock the boot loader) to lock up the bootloader and reset to stock?
If someone could be as explicit as possible in correctiong or validating my steps above it would be much, much appreciated.
I don't want to do any more unnecessary steps in flashing things than is needed so if I have extra steps above (perhaps 4 is not needed?) Let me know.
Thanks

Proceed with Caution
I am not an expert by any means, but can speak from personal experience. I was in the exact same situation as you. I followed the detailed steps to unlock the bootloader on my pixel 2, received similar issues, and the same prompt when the phone rebooted. All that to say proceed with caution.
My thoughts on questions 1 & 2: I personally wouldn't recommend you remove or delete magisk from the manager. When I did i had to reinstall it via twrp. My phone functioned fine, apart from the error at reboot.
My thoughts on questions 3 -5: When I followed the steps on XDA for your questions here I ended up bricking my Pixel 2 with locked bootloader from Verizon. Probably an error on my part, but wouldn't want someone else to go through the headache, hours of issues, and then an expensive paper weight.
My suggestion would be to:
1. Leave your phone as is and attempt to trouble shoot the app or apps you are having issue with
2. contact Google support on your phone and see if they would replace it
3. wait for an established method to unroot the pixel 2 here
Thankfully Google replaced my phone due to the error after rebooting, prior to me bricking it. I knew I had a replacement phone coming. So I attempted to go back to stock and that is when I messed it up.
Note sure this is exactly what you were looking for, but hope this helps you.

Dozens of posts with hundreds of pages on how to root but no advice on how to go back to stock cleanly?

iridium7777 said:
Dozens of posts with hundreds of pages on how to root but no advice on how to go back to stock cleanly?
Click to expand...
Click to collapse
Your version is Verizon which is making things more complicated. Generally when the bootloader is unlocked, you just hit flash-all.bat and then relock the phone. Given that the Verizon I'm not sure.
So you are on stock ROM with all these apks loaded ? If you go to settings, then do a factory data reset, you'll reset the phone back to stock and completely wipe the phone and return it to stock, at that point you can go into bootloader mode and relock.
Again your bootloader is unlocked, so the flash-all is your best option. If you see the red exclamation point with the error android laying on his back, you press power and up volume and toggle that and it will bring in the stock recovery which you can sideload the OTA however it may fail since you have magisk.
I bought my phone stock last year and have not rooted it or modified it in anyway. Too many problems and it only gets harder and harder as Google releases a new phone.

@mikeprius -- thank you for replying. after reading more on here, it seems like that's the way to go -- flash-all script, seems like i don't really need to do 1&2 that i wrote above as the flash-all will wipe that out by itself.
at that point i should be running the latest stock 8.1 but with an unlocked bootloader (and according boot up message screen) and i should be able to re-do the fastbook unlocking command to lock the phone back up.
(and yes, after reading even more now -- and i tried this yesterday -- i completely missed the portion about PWR + Vol Up button, that's why i think i had that issue, but still, i was able to push the update by pushing img and then the zip through).

iridium7777 said:
@mikeprius -- thank you for replying. after reading more on here, it seems like that's the way to go -- flash-all script, seems like i don't really need to do 1&2 that i wrote above as the flash-all will wipe that out by itself.
at that point i should be running the latest stock 8.1 but with an unlocked bootloader (and according boot up message screen) and i should be able to re-do the fastbook unlocking command to lock the phone back up.
(and yes, after reading even more now -- and i tried this yesterday -- i completely missed the portion about PWR + Vol Up button, that's why i think i had that issue, but still, i was able to push the update by pushing img and then the zip through).
Click to expand...
Click to collapse
If I were in your situation and the bootloader is unlocked, just use flash-all which has a wipe script then call it a day. I think trying to screw around even more is just a waste of time and I wouldn't even bother with the OTA, just erase and flash stock. You don't have to relock your bootloader if you don't want to, if you stay fully stock you may still be able to get OTA updates. I'm not sure if a bootloader locked is required someone can chime in as it has been awhile since I've done this, but over 1 yr ago, I just kept the bootloader unlocked, kept things stock and everything was good to go. Obviously there are security issues with an unlocked bootloader, but I'm sure you know this already

@mikeprius you keep saying reset/erase, do you suggest i re-set the phone and then flash the stock image?
i was just going to flash the stock image, i figured it already wipes the phone, and locking the bootloader would wipe it again, so what's the point of erasing all data prior?

Not to hijack this thread, but a question to add... I thought that there were kernels that would mask certain things to allow all of those apps to work, and get rid of the "problem with device" message.
Is that correct?

iridium7777 said:
@mikeprius you keep saying reset/erase, do you suggest i re-set the phone and then flash the stock image?
i was just going to flash the stock image, i figured it already wipes the phone, and locking the bootloader would wipe it again, so what's the point of erasing all data prior?
Click to expand...
Click to collapse
Just flash the stock images. It will auto reset.
Again, don't mess with anything just flash stock images, then go from there.
Also flash the newest version of the stock images out there. The pixel 2 will error if you try to downgrade any version.

here are all the steps to UNROOT and LOCK the boot loader on your Pixel 2 on a Mac (windblows users simply ignore all the "./" references).
1) download the latest ADB tools from google
2) download the latest factory Walleye image
3) unzip files from 1&2 into a common directory
4) edit flash-all.sh file and add "./" infront of every instance of "fastboot" in the script [windows users ignore this step]
5)hook up your phone to your computer in debug and file transfer mode. check that "./adb devices" loads your devide
6)type " ./adb reboot bootloader"
7) check that your device is still connected by typing "./fastboot devices"
8) type "./flash-all.sh"
===the script will run and your phone will be restored to stock, and UNROOTED. upon boot up skip through all of the setup steps and get to the phone settings as fast as you can. enable developer option, enable debug mode, set phone to data transfer ====
9) check that your phone is connect to your computer by "./adb devices"
10) type "./adb reboot bootloader"
11) check your devices is still connected by "./fastboot devices"
12) type "./fastboot flashing lock"
===== this will re-wipe your device again, you'll see the circle of death, and this will LOCK your boot loader back up again======
side note, feel free to skip over the steps where you check that your phone is still connected to the computer (./fastboot devices) if you're less paranoid and comfortable.

iridium7777 said:
here are all the steps to UNROOT and LOCK the boot loader on your Pixel 2 on a Mac (windblows users simply ignore all the "./" references).
1) download the latest ADB tools from google
2) download the latest factory Walleye image
3) unzip files from 1&2 into a common directory
4) edit flash-all.sh file and add "./" infront of every instance of "fastboot" in the script [windows users ignore this step]
5)hook up your phone to your computer in debug and file transfer mode. check that "./adb devices" loads your devide
6)type " ./adb reboot bootloader"
7) check that your device is still connected by typing "./fastboot devices"
8) type "./flash-all.sh"
===the script will run and your phone will be restored to stock, and UNROOTED. upon boot up skip through all of the setup steps and get to the phone settings as fast as you can. enable developer option, enable debug mode, set phone to data transfer ====
9) check that your phone is connect to your computer by "./adb devices"
10) type "./adb reboot bootloader"
11) check your devices is still connected by "./fastboot devices"
12) type "./fastboot flashing lock"
===== this will re-wipe your device again, you'll see the circle of death, and this will LOCK your boot loader back up again======
side note, feel free to skip over the steps where you check that your phone is still connected to the computer (./fastboot devices) if you're less paranoid and comfortable.
Click to expand...
Click to collapse
hey there. what is the command suppose to look like? every combination I try gives me an error:
first, I don't even enter the Fastboot command the same wayit given me an error:
Asads-MacBook:~ asad$ ./fastboot devices
-bash: ./fastboot: No such file or directory
so I try this: Asads-MacBook:~ asad$ fastboot devices
[serial #] fastboot
these are all the errors I get:
Asads-MacBook:~ asad$ cd /Users/asad/Desktop/walleye-opm1.171019.021
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: fastboot./: No such file or directory
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: ./fastboot: No such file or directory
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
fastboot: usage: unknown command ./flash
...
Asads-MacBook:walleye-opm1.171019.021 asad$ ./flash-all.sh
./flash-all.sh: line 21: fastboot./: No such file or directory
...
how is the command suppose to look that I can edit it the right way?

"fastboot: No such file or directory" means that you didn't do step 1, step 3 on the file you didn't download, and there should probably be a "cd /<whatever the 'common directory'>" is. (I just created a directory named adb. That's good enough for me to know what it's for.)
You have to download adb and fastboot (which come in the adb tools file), unzip them to whatever directory you're going to use for flashing the phone, and cd to that directory.
Then, since you're evidently on MacOS, each command has to have ./ in front of it (that says "the current directory"). Try all that, then see what happens.

Rukbat said:
"fastboot: No such file or directory" means that you didn't do step 1, step 3 on the file you didn't download, and there should probably be a "cd /<whatever the 'common directory'>" is. (I just created a directory named adb. That's good enough for me to know what it's for.)
You have to download adb and fastboot (which come in the adb tools file), unzip them to whatever directory you're going to use for flashing the phone, and cd to that directory.
Then, since you're evidently on MacOS, each command has to have ./ in front of it (that says "the current directory"). Try all that, then see what happens.
Click to expand...
Click to collapse
yayy! that worked!
so i had adb and fastboot in a folder (platform-tools) and i had the factory image in its own seperate folder (walleye-files). i was making the cd; walleye folder and trying to flash-all.sh there.
so i had to put the files from the walleye folder into the platform-tools folder. Then I made platform-tools the cd. now when . i could now follow all the steps from 4-12 and got the pixel 2 the way it was OTB.
thanks!

Great! I'm not a Mac expert (last time I used one was the 128K Mac in 1985), so I'm not sure how to export a path in MacOs, so I gave you the complicated way, but you got it done anyway. (If you ever find out how to add the platform-tools folder to your path, you can leave adb and fastboot in there and keep the ROMs [walleye] in their own folder, cd to it and adb and fastboot will still work.)

Question [SOLVED] "Pixel Is Starting"

Soft-Bricked my phone this morning flashing a Substratum Theme. Don't ask, I don't know why but it did.
Did a factory reset, Pixel Flasher, set up Magisk, rebooted - got Pixel is Starting. - couldn't get out of it and this was AFTER I recopied all my stuff back over form the last update I had on my Computer and Swift/Google Backups.
Factory reset, same thing happened while doing a reboot at some point int he process.
THIRD Factory reset, got everything done, restored, up and running, just did a reboot and it's back.WTF?? And how do I get out if this?

How are you factory resetting the device?
Also, perhaps something that you are restoring is causing the boot issue. You shouldn't restore data from Swift Backup immediately after fully re-imaging your phone - if that is part of what you are doing.

NippleSauce said:
How are you factory resetting the device?
Also, perhaps something that you are restoring is causing the boot issue. You shouldn't restore data from Swift Backup immediately after fully re-imaging your phone - if that is part of what you are doing.
Click to expand...
Click to collapse
No, I’m doing the factory reset in recovery. Then when the phone booths up just going through the bare minimum of settings to get to the home screen so I can flash the newest update and get routed. Since it’s a factory update and I need to disable verity and verification I have to wipe again anyway and then I go through the whole set up process, let google restore all my apps and stuff and then I use swift back up to restore my apps and data.
I wonder if when I do my back up from Swift I should just do data instead of letting the apps overwrite them selves

Searching online it looks like I can still connect with ADB. I’ll see if I can use the flashing tool and maybe re-flash without wiping

Ahh, gotcha. You can try what you said but I would also suggest re-imaging your phone with the matching factory image that you are currently running. You can do a proper, full re-image through recovery without wiping your phone.

NippleSauce said:
Ahh, gotcha. You can try what you said but I would also suggest re-imaging your phone with the matching factory image that you are currently running. You can do a proper, full re-image through recovery without wiping your phone.
Click to expand...
Click to collapse
How do I do that?

HipKat said:
How do I do that?
Click to expand...
Click to collapse
A lot of commands lol. I will update this comment in just a moment once I head over to my desktop. Typing this out on my phone would be a real disaster, haha.
Alrighty! Here is that update:
1. Ensure that you have the latest version of platform-tools somewhere on your hard drive. Also ensure that your phone has ADB enabled - which you said yours has enabled already - so you should be all good there.
2. Download the correct, most updated factory image here:
--> https://developers.google.com/android/images
3. Extract the contents of the factory image into your platform-tools folder. If you want to root, also be sure to extract the init_boot.img from image.zip file that is inside of the main factory image zip file.
4. Right-click and edit the flash-all.bat file and remove the "-w" near the bottom of the document. "-w" means "wipe". Make sure to save the document after making this change.
5. Copy the directory of your platform-tools folder.
6. Open CMD as an administrator.
7. In CMD, change directories to your platform-tools folder. The command is:
cd DirectoryLocationYouCopiedGoesHere
8. Connect your phone to your PC over USB.
9. In CMD once it is navigated to the platform-tools folder (which should also contain the extracted factory image files at this point), type the following commands:
adb reboot-bootloader
**This will reboot your phone into the bootloader**
flash-all
**This will run the flash-all.bat script which will re-image your phone with the downloaded factory image. It will not wipe your phone if you remembered to remove the "-w" line as mentioned above. Also, DO NOT interact with your phone while this command is running. It will automatically boot itself once it is done - which can take up to 5-10 minutes.
10. You can probably do the rest on your own from this point. But the basis of what comes next would be installing Magisk, copying the init_boot.img over to your phone, patching it in Magisk, copying the patched init_boot.img back over to your computer, booting your phone into recovery mode once again (via CMD) and then running the following command in CMD as admin:
fastboot flash init_boot MagiskPatchedInitBootFileNameGoesHere.img
**This will flash the patched init_boot.img file**
Then use this command:
fastboot reboot
**That will take your phone out of recovery and cause it to boot normally**.
I actually have to run to a birthday party right now so I can't write any more specific details. If you don't feel comfortable doing this all, please let me know. If that's the case, I'll make a video showing how to do this tomorrow or something, haha.

NippleSauce said:
A lot of commands lol. I will update this comment in just a moment once I head over to my desktop. Typing this out on my phone would be a real disaster, haha.
Click to expand...
Click to collapse
Lol,I’m hip

NippleSauce said:
A lot of commands lol. I will update this comment in just a moment once I head over to my desktop. Typing this out on my phone would be a real disaster, haha.
Alrighty! Here is that update:
1. Ensure that you have the latest version of platform-tools somewhere on your hard drive. Also ensure that your phone has ADB enabled - which you said yours has enabled already - so you should be all good there.
2. Download the correct, most updated factory image here:
--> https://developers.google.com/android/images
3. Extract the contents of the factory image into your platform-tools folder. If you want to root, also be sure to extract the init_boot.img from image.zip file that is inside of the main factory image zip file.
4. Right-click and edit the flash-all.bat file and remove the "-w" near the bottom of the document. "-w" means "wipe". Make sure to save the document after making this change.
5. Copy the directory of your platform-tools folder.
6. Open CMD as an administrator.
7. In CMD, change directories to your platform-tools folder. The command is:
cd DirectoryLocationYouCopiedGoesHere
8. Connect your phone to your PC over USB.
9. In CMD once it is navigated to the platform-tools folder (which should also contain the extracted factory image files at this point), type the following commands:
adb reboot-bootloader
**This will reboot your phone into the bootloader**
flash-all
**This will run the flash-all.bat script which will re-image your phone with the downloaded factory image. It will not wipe your phone if you remembered to remove the "-w" line as mentioned above. Also, DO NOT interact with your phone while this command is running. It will automatically boot itself once it is done - which can take up to 5-10 minutes.
10. You can probably do the rest on your own from this point. But the basis of what comes next would be installing Magisk, copying the init_boot.img over to your phone, patching it in Magisk, copying the patched init_boot.img back over to your computer, booting your phone into recovery mode once again (via CMD) and then running the following command in CMD as admin:
fastboot flash init_boot MagiskPatchedInitBootFileNameGoesHere.img
**This will flash the patched init_boot.img file**
Then use this command:
fastboot reboot
**That will take your phone out of recovery and cause it to boot normally**.
I actually have to run to a birthday party right now so I can't write any more specific details. If you don't feel comfortable doing this all, please let me know. If that's the case, I'll make a video showing how to do this tomorrow or something, haha.
Click to expand...
Click to collapse
Flashing now. For future reference, in CMD, you need to run adb kill-server, then adb-devices before rebooting to bootloader (I'm not a TOTAL ADB noob lol). In my case, none were found so I just disconnected and reconnected the USB from the phone and it found it.
Also, Pixel Flasher was not able to work in Recovery or in the Pixel Is Starting state, which shows up on the tool as ADB - probably not rooted.
I'll update when it's done

Grrrr, no luck. Right back to Pixel is Starting.
Back to the hard way

HipKat said:
Grrrr, no luck. Right back to Pixel is Starting.
Back to the hard way
Click to expand...
Click to collapse
When you're on this screen, normally it's a launcher thing. Have you flashed any mods for launchers?
If you're still able to access your settings through the notification bar, you should be able to go to apps in your settings and open the Play Store to temporarily download another launcher. This will at least allow you to get some usage from your phone.

Curiousn00b said:
When you're on this screen, normally it's a launcher thing. Have you flashed any mods for launchers?
If you're still able to access your settings through the notification bar, you should be able to go to apps in your settings and open the Play Store to temporarily download another launcher. This will at least allow you to get some usage from your phone.
Click to expand...
Click to collapse
It's an encryption thing with the unlock method, pin, fingerprint, etc form everything I've read, and I read a lot and no one has been able to get past it without a wipe. I've used Nova Pro with the same settings over many devices
You can't get to apps. You can get to settings but if you select Apps and try to open an app, the only options are Uninstall and Force Stop

It's in the data on the Swift Restore. Everything is good after restoring Google Backup, and Swift missing Apps. I restored only data on system apps and user apps and the next reboot gave me this error. I wonder if I should NOT restore system data... I almost didn't just to see what happened, but I would have anyway

Confirmed, not restoring System Data was the fix. Funny, I have restored Sys Data Twice before today....

HipKat said:
Flashing now. For future reference, in CMD, you need to run adb kill-server, then adb-devices before rebooting to bootloader (I'm not a TOTAL ADB noob lol). In my case, none were found so I just disconnected and reconnected the USB from the phone and it found it.
Click to expand...
Click to collapse
In adb you do not have to run those commands. Adb devices would just let you check if an adb enabled device is connected. Adb kill-server only needs to be run if you had already used adb commands with your connected device, disconnected it and then reconnected it. That would kill the originally established and utilized adb connection which would then allow you to establish another one - which I suppose I should have mentioned considering you had tried things over adb prior to my comment, haha. My apologies.
But regardless, I'm glad that you got it working again! So it was that Swift Backup restore after all? That is good to know. Awesome stuff.

NippleSauce said:
In adb you do not have to run those commands. Adb devices would just let you check if an adb enabled device is connected. Adb kill-server only needs to be run if you had already used adb commands with your connected device, disconnected it and then reconnected it. That would kill the originally established and utilized adb connection which would then allow you to establish another one - which I suppose I should have mentioned considering you had tried things over adb prior to my comment, haha. My apologies.
But regardless, I'm glad that you got it working again! So it was that Swift Backup restore after all? That is good to know. Awesome stuff.
Click to expand...
Click to collapse
Yeah, I should know better than to restore old System Data. It used to be a no-no, but the first 2 times I did a restore after first rooting and then a wipe a few weeks ago, I hadn't even thought of it. That's what 78 years away from the Rooting game does to you.
As for those commands, ADB-Devices came back with nothing till I did kill-server. Probably just something on my end

How To Guide How to extract boot.img from OnePlus 9 firmware packages to patch with Magisk & flash to your phone using Linux Mint 21.1

As a OnePlus 9 user who likes to root their phone mainly to allow Network Signal Guru to work (as well as a few other root things like AdAway) I had been trying to extract the boot.img the same way as I had done with a OnePlus 7T using Payload Dumper for Windows. However it looks like Payload Dumper has issues with extracting xx.img files (including boot.img) if the payload.bin file is bigger than 4.3 GB in size. So I've been looking to see if another method was possible that would work for our OnePlus 9 ROMs that are above this file size. As I use Linux Mint as my usual desktop OS & only fall back onto Windows for stuff that'll only run on that OS, I went to have a look to see if something could be done under Linux. Turns out there is an old thread elsewhere on XDA that almost nearly provides what is needed for this, and I thought I would gives details here that should work for the time of this post (March 2023).
This not only extracts the boot.img to patch in Magisk, but also extracts other xx.img files as well.
I'm using Linux Mint 21.1, but I'd assume that this will also work for similar Ubuntu builds or anything that is based on Debian.
Obligatory disclaimer: The following instructions I'm giving below have worked well for me several times in the past, however I am in no way responsible for screwing up or damaging your phone if you try and follow what I've written below. In extreme cases, a bad flash may require using the OnePlus MSM tool to completely reflash your phone. Back up anything important first before doing any of the following!​
1. You will need to ensure that you have downloaded packages to be able to do adb & fastboot from the command line. You can check by running the following commands - if it's already installed with the latest versions, the terminal interface will let you know...
Code:
sudo apt install adb
Code:
sudo apt install fastboot
2. You will need to go to your software manager in LM21.1 and install both Python 3 & the Python Protobuf compiler. Just search for "Python 3" & "Protobuf-compiler" in the software manager and the first option for each search is what you should need - if they are not installed, install them.
3. Create a read/writable directory that will hold your ROM that you've just downloaded & other files that I'll mention soon. I just use a folder calls "ROM" in my Downloads folder (e.g. /home/lawhec/Downloads/ROM ), but you can choose wherever you want that suits you.
4. If you have not done so already, make sure you have the FULL package of your OnePlus 9 ROM downloaded. As of right now (March 2023) it seems the best way is to download the package using the Oxygen Updater app which is available on Google Play - more info available at oxygenupdater.com - just download the ROM to your phone and transfer it on to your computer into the folder you've created for it.
5. Download and save the following two Python scripts/files ("Right click" & "Save Link As") into the folder you have just created for your ROM (all credit to Gregory Cyxx at github.com/cyxx )...
https://raw.githubusercontent.com/c...payload/master/extract_android_ota_payload.py
https://raw.githubusercontent.com/cyxx/extract_android_ota_payload/master/update_metadata_pb2.py
6. Make sure in your file browser (Nemo in my case as it is the default for LM21.1 Cinammon, yours may differ) the window is open in the ROM folder that contains the two Python scripts above that you've just downloaded as well as a ROM package (ZIP file) you've downloaded (in my case from Oxygen Updater mentioned in step 3). Create a new folder for the extracted images to be written to - in my case I just call the folder "output" which is located at "/home/lawhec/Downloads/ROM/output" but again you can call it what you wish.
7. After you've created your output folder, in your ROM directory in the file manager window right-click on your mouse in a white or free space and select "Open in Terminal" - a command terminal will pop up defaulting to your directory.
8. In the command terminal, type the following command and press enter/return...
Code:
sudo python3 extract_android_ota_payload.py <<Your ROM.zip>> <<Your Output Directory>>
...for example, in my case the command would be either...
Code:
sudo python3 extract_android_ota_payload.py LE2113_11_F-75.zip output
...or for handiness you can type "sudo python3 extract_android_ota_payload.py " (remember to leave a space) and simply drag the ROM zip file to the command terminal, press space and then drag the output foler to the terminal line, which will look like in my case...
Code:
sudo python3 extract_android_ota_payload.py '/home/lawhec/Downloads/ROM/LE2113_11_F-75.zip' '/home/lawhec/Downloads/ROM/output'
...this will now run the python script you downloaded earlier that will begin extracting the ROM you've specified and will output all relevant xx.img files into your output folder, including the one we want, "boot.img" - there is no need to extract paylod.bin beforehand, the script will automatically do this for you. Once all xx.img files have been extracted the script will stop, depending on your computer this will take anything from 1-5 minutes, maybe longer on some very old or low spec'd computers - but just let it run its course. Once it is done you can then close the terminal window.
9. Now with the boot.img we've extracted, transfer this file on to your phone (the Downloads folder is usually a good choice). Now open Magisk and patch the boot.img file - once this has been completed, it'll generate a patched boot.img file named something like "magisk_patched-25200_12345.img" - copy and paste this patched boot image back on to your computer (into the folder you've been using will be fine here).
10. If your OnePlus 9 phone is connected to your computer via USB cable, disconnect it now. Then shutdown your phone into a power-off state then reboot it into fastboot mode - this can be done by holding down the volume up & down buttons, then holding down the power button and keep holding down all three buttons until you feel a vibration from your phone. Your OnePlus 9 should then boot into fastboot mode.
11. Now reconnect your OnePlus 9 to your computer via the USB cable and then open up a new display terminal (preferably by right-clicking in the file window of the directory where you saved your Magisk patched boot.img file). Enter the following...
Code:
fastboot devices
...you should then get a line featuring a block of numbers that should match the serial number that is displayed on your phone's display, followed by "fastboot", for example...
Code:
85f53405 fastboot
...if you get anything else, double check your connections at try again - if more than one device is displayed, disconnect the and try again to make sure that only one device is listed. It might also be the case that you don't have the proper drivers installed on your computer for your phone though in my case LM21.1 automatically recognises my phone, so I'm not of any direct help here I'm afraid for this, sorry.
12. Now you will be flashing your patched boot.img to your phone - this is where things can be a little nervous though as long as you do everything right nothing should really go wrong. Type the following into the command terminal, assuming you did so by opening a command terminal from the folder your Magisk Patched boot.img file is located...
Code:
fastboot flash boot <<Magisk Patched boot.img>>
...for example in my case the command line would be...
Code:
fastboot flash boot magisk_patched-25200_12345.img
...otherwise you will need to provide the location of where your patched boot.img is, so in this case...
Code:
fastboot flash boot '/home/lawhec/Downloads/ROM/magisk_patched-25200_12345.img'
...either way, your phone will now be in the process of getting its boot image replaced with the one patched by Magisk. This should take no more than a few seconds and that should be it done! You can then close the terminal window again.
13. Once you've patched the boot image, disconnect the phone from the USB cable to the computer and make sure that the screen on your mobile says "START" in green at the top, if it doesn't, use the volume keys to change this. Then just simply press the power button and your phone will now reboot, this can take a little bit longer than before as your phone's firmware has changed so give it time - (however if it takes longer than 10 minutes or so you might have a problem here) - once your home screen becomes available, give it a few seconds once you've entered before selecting the Magisk app. Once you've done this, Magisk should say that it is installed however to double check, use an app that requires root permissions either to work (e.g. Network Signal Guru) or to do additional things, like a simple root checker app that you can download from wherever you download your apps. If everything is good, then you've rooted your OnePlus 9!
Notes: This process will probably work for other firmware packages for various phones where the boot.img can be extracted to be patched by Magisk and then flashed via fastboot (assuming the bootloader is unlocked) which includes the OnePlus 7T's stock firmware, but I can give no guarantees for this. Once again, try at your own risk.​

I would suggest to boot the magisk patched image and then doing a direct install from the app instead of flashing it directly. This way you can use the "Restore images" feature in the Magisk app that can be useful when doing incremental update.

Thank You for thinking of Us Linux Users !
Attempted to update to LOS 20 via ADB, and now my touch screen will not work. All the remedies here require a Windows system for the MSM tool, which I do not have...

barguybrady said:
Thank You for thinking of Us Linux Users !
Attempted to update to LOS 20 via ADB, and now my touch screen will not work. All the remedies here require a Windows system for the MSM tool, which I do not have...
Click to expand...
Click to collapse
You have a computer you can install windows on another partition it's not like you don't have the ability to use msm

stez827 said:
You have a computer you can install windows on another partition it's not like you don't have the ability to use msm
Click to expand...
Click to collapse
no comment

barguybrady said:
Yup.
Just gonna spend another 4 or 5 hours prepping a drive to somehow install windows just to fix a phone.
Maybe - No....
Click to expand...
Click to collapse
It does not take that long as a Linux user who has had to install for that exact reason it took maybe an hour or 2

lawhec said:
As a OnePlus 9 user who likes to root their phone mainly to allow Network Signal Guru to work (as well as a few other root things like AdAway) I had been trying to extract the boot.img the same way as I had done with a OnePlus 7T using Payload Dumper for Windows. However it looks like Payload Dumper has issues with extracting xx.img files (including boot.img) if the payload.bin file is bigger than 4.3 GB in size. So I've been looking to see if another method was possible that would work for our OnePlus 9 ROMs that are above this file size. As I use Linux Mint as my usual desktop OS & only fall back onto Windows for stuff that'll only run on that OS, I went to have a look to see if something could be done under Linux. Turns out there is an old thread elsewhere on XDA that almost nearly provides what is needed for this, and I thought I would gives details here that should work for the time of this post (March 2023).
This not only extracts the boot.img to patch in Magisk, but also extracts other xx.img files as well.
I'm using Linux Mint 21.1, but I'd assume that this will also work for similar Ubuntu builds or anything that is based on Debian.
Obligatory disclaimer: The following instructions I'm giving below have worked well for me several times in the past, however I am in no way responsible for screwing up or damaging your phone if you try and follow what I've written below. In extreme cases, a bad flash may require using the OnePlus MSM tool to completely reflash your phone. Back up anything important first before doing any of the following!​
1. You will need to ensure that you have downloaded packages to be able to do adb & fastboot from the command line. You can check by running the following commands - if it's already installed with the latest versions, the terminal interface will let you know...
Code:
sudo apt install adb
Code:
sudo apt install fastboot
2. You will need to go to your software manager in LM21.1 and install both Python 3 & the Python Protobuf compiler. Just search for "Python 3" & "Protobuf-compiler" in the software manager and the first option for each search is what you should need - if they are not installed, install them.
3. Create a read/writable directory that will hold your ROM that you've just downloaded & other files that I'll mention soon. I just use a folder calls "ROM" in my Downloads folder (e.g. /home/lawhec/Downloads/ROM ), but you can choose wherever you want that suits you.
4. If you have not done so already, make sure you have the FULL package of your OnePlus 9 ROM downloaded. As of right now (March 2023) it seems the best way is to download the package using the Oxygen Updater app which is available on Google Play - more info available at oxygenupdater.com - just download the ROM to your phone and transfer it on to your computer into the folder you've created for it.
5. Download and save the following two Python scripts/files ("Right click" & "Save Link As") into the folder you have just created for your ROM (all credit to Gregory Cyxx at github.com/cyxx )...
https://raw.githubusercontent.com/c...payload/master/extract_android_ota_payload.py
https://raw.githubusercontent.com/cyxx/extract_android_ota_payload/master/update_metadata_pb2.py
6. Make sure in your file browser (Nemo in my case as it is the default for LM21.1 Cinammon, yours may differ) the window is open in the ROM folder that contains the two Python scripts above that you've just downloaded as well as a ROM package (ZIP file) you've downloaded (in my case from Oxygen Updater mentioned in step 3). Create a new folder for the extracted images to be written to - in my case I just call the folder "output" which is located at "/home/lawhec/Downloads/ROM/output" but again you can call it what you wish.
7. After you've created your output folder, in your ROM directory in the file manager window right-click on your mouse in a white or free space and select "Open in Terminal" - a command terminal will pop up defaulting to your directory.
8. In the command terminal, type the following command and press enter/return...
Code:
sudo python3 extract_android_ota_payload.py <<Your ROM.zip>> <<Your Output Directory>>
...for example, in my case the command would be either...
Code:
sudo python3 extract_android_ota_payload.py LE2113_11_F-75.zip output
...or for handiness you can type "sudo python3 extract_android_ota_payload.py " (remember to leave a space) and simply drag the ROM zip file to the command terminal, press space and then drag the output foler to the terminal line, which will look like in my case...
Code:
sudo python3 extract_android_ota_payload.py '/home/lawhec/Downloads/ROM/LE2113_11_F-75.zip' '/home/lawhec/Downloads/ROM/output'
...this will now run the python script you downloaded earlier that will begin extracting the ROM you've specified and will output all relevant xx.img files into your output folder, including the one we want, "boot.img" - there is no need to extract paylod.bin beforehand, the script will automatically do this for you. Once all xx.img files have been extracted the script will stop, depending on your computer this will take anything from 1-5 minutes, maybe longer on some very old or low spec'd computers - but just let it run its course. Once it is done you can then close the terminal window.
9. Now with the boot.img we've extracted, transfer this file on to your phone (the Downloads folder is usually a good choice). Now open Magisk and patch the boot.img file - once this has been completed, it'll generate a patched boot.img file named something like "magisk_patched-25200_12345.img" - copy and paste this patched boot image back on to your computer (into the folder you've been using will be fine here).
10. If your OnePlus 9 phone is connected to your computer via USB cable, disconnect it now. Then shutdown your phone into a power-off state then reboot it into fastboot mode - this can be done by holding down the volume up & down buttons, then holding down the power button and keep holding down all three buttons until you feel a vibration from your phone. Your OnePlus 9 should then boot into fastboot mode.
11. Now reconnect your OnePlus 9 to your computer via the USB cable and then open up a new display terminal (preferably by right-clicking in the file window of the directory where you saved your Magisk patched boot.img file). Enter the following...
Code:
fastboot devices
...you should then get a line featuring a block of numbers that should match the serial number that is displayed on your phone's display, followed by "fastboot", for example...
Code:
85f53405 fastboot
...if you get anything else, double check your connections at try again - if more than one device is displayed, disconnect the and try again to make sure that only one device is listed. It might also be the case that you don't have the proper drivers installed on your computer for your phone though in my case LM21.1 automatically recognises my phone, so I'm not of any direct help here I'm afraid for this, sorry.
12. Now you will be flashing your patched boot.img to your phone - this is where things can be a little nervous though as long as you do everything right nothing should really go wrong. Type the following into the command terminal, assuming you did so by opening a command terminal from the folder your Magisk Patched boot.img file is located...
Code:
fastboot flash boot <<Magisk Patched boot.img>>
...for example in my case the command line would be...
Code:
fastboot flash boot magisk_patched-25200_12345.img
...otherwise you will need to provide the location of where your patched boot.img is, so in this case...
Code:
fastboot flash boot '/home/lawhec/Downloads/ROM/magisk_patched-25200_12345.img'
...either way, your phone will now be in the process of getting its boot image replaced with the one patched by Magisk. This should take no more than a few seconds and that should be it done! You can then close the terminal window again.
13. Once you've patched the boot image, disconnect the phone from the USB cable to the computer and make sure that the screen on your mobile says "START" in green at the top, if it doesn't, use the volume keys to change this. Then just simply press the power button and your phone will now reboot, this can take a little bit longer than before as your phone's firmware has changed so give it time - (however if it takes longer than 10 minutes or so you might have a problem here) - once your home screen becomes available, give it a few seconds once you've entered before selecting the Magisk app. Once you've done this, Magisk should say that it is installed however to double check, use an app that requires root permissions either to work (e.g. Network Signal Guru) or to do additional things, like a simple root checker app that you can download from wherever you download your apps. If everything is good, then you've rooted your OnePlus 9!
Notes: This process will probably work for other firmware packages for various phones where the boot.img can be extracted to be patched by Magisk and then flashed via fastboot (assuming the bootloader is unlocked) which includes the OnePlus 7T's stock firmware, but I can give no guarantees for this. Once again, try at your own risk.​
Click to expand...
Click to collapse
If Using the t-Mobile Variant - LE2117 - we are Unable to Install any OTA Updates with OxygenUpdater, and are promptly warned of this limitation upon install. Nevertheless, I forged ahead and,
Following this Method, I downloaded a LE2115_11_F.17.zip, and proceeded to use your helpful .py scripts to extract the boot.img file, and Flash it - promptly sending me to a Qualcomm CrashDump mode.
Having a chance to MSM back to "stock" LE2117 - 11.2.2.2 LE54CB, I am wondering if I should just let the t-Mobile Update, through "Settings >> System >> System update" to Update the Stock ( bloated !? ) OS with all that are available,
Then attempt to Extract a boot.img and Magisk patch it ?
Any Advice?
TIA

Guide to Rooting the Infinix Hot 30 Play, With Magisk

Preface​Luckily, it looks like Infinix is following the general trend of Android root solutions being more straightforward than in the recent past. Besides the usual spiel about your warranty being voided, and the annoying chirp each time you boot your phone, this hopefully won't present any problems for you if you do end up rooting your phone.
Notices​
Still, I'm not responsible for anything bad that will happen to your phone if you do this, and there's no support guaranteed either from me or your OEM/support centre.
There's quite a few steps to this, and naturally you're gonna need a few more things to setup before you even start.
Your phone's data will be reset, please backup everything you'd like to keep before rooting your phone (now and in general).
You do need to know some things already, mainly what ADB and Fastboot are, and how to keep your working environment clean and straightforward.
Please do review all the tools you're working with, be sure that you personally trust all the software you're running.
And last but not least, you won't be able to update your phone through OTA updates anymore unless you go back to stock firmware.
The process​
Make an environment for easy access:
Setup ADB and Fastboot (either as a local executable or a global environment variable to that executable).
Setup an easy to access directory with the Google Fastboot driver in it.
Grab your firmware's boot.img file, or grab the one attached to this post, or from here (and skip to the preliminary work section):
1. Download your phone's current ROM.
2. Extract it, as it should be a simple .zip file.
3. Look for the file of the same name (boot.img).
4. Copy it to your phone's storage, anywhere works.
Install the Magisk APK (from their Github).
Once it's installed, Magisk's app frontend allows you to patch your stock boot.img with itself, the gist of it is:
Click on Install within the app, in the "Magisk" section of the main menu.
Click "Select and patch a file", a file selection menu will show up, select the stock boot.img, then start the installation.
Magisk should spit out a patched boot.img named in the format of magisk_patched_[random_strings].img, in your phone's /sdcard/Download/ directory.
Copy that back into our working directory, and rename it to magisk_patched.img for easier usage.
Now, let's do some preliminary work, in any order, really:
Have Powershell or CMD open in the directory of all your tools, alongside the patched image.
Click to expand...
Click to collapse
From here on out, if you have to use adb as a command, and it's not a global environment variable, use ./adb while in the working directory instead, the same goes for fastboot.
Click to expand...
Click to collapse
Make sure that the adb daemon (adbd) is properly detecting your phone:
Enable developer options.
Enable ADB debugging.
Run adb devices to start the server daemon for ADB, and see if ADB detects your phone.
Authorize your PC for ADB debugging if it prompts you to.
Click to expand...
Click to collapse
Infinix's implementation of Fastboot will exit back out of itself and into normal boot after 60 seconds of inactivity, which makes this a tad annoying, although you can simply send it any input to reset that timer.
Click to expand...
Click to collapse
Let's start:
Restart the phone into Fastboot, adb reboot bootloader loader, it'll take a second, the phone is slow.
Unlock flashing 3rd party software, fastboot flashing unlock, the phone will prompt you on the screen to confirm doing this. Yes, this will void your warranty.
Flash magisk_patched.img to both A and B virtual partitions, fastboot flash boot_a magisk_patched.img and then fastboot flash boot_b magisk_patched.img.
That should be it! fastboot reboot to boot normally!
Be sure to also run the Magisk app so it finishes setting itself up, with another reboot, naturally.
Technicalities​The Infinix Hot 30 Play does have a dedicated vbmeta partition, it's advised that you also flash it alongside flashing the patched boot.img for Verified Boot, but that's not necessary if you don't want to tinker with your super partition's crypto keys.
Thank yous​- topjohnwu for their work on Magisk.
- ansh_/ and their post/guide on rooting the Infinix Hot 11, that I used originally.

Addendum​
Using fastboot with MediaTek SoCs will be a bit of a pain as their driver availibilty is limited, if it doesn't get installed by Windows automatically, you have a few options:
Grab the Google's Pixel driver, and install it in realtime during fastboot.
Try to install the VCOM driver from a source you trust.
For grabbing the Google one, you'll have to:
Extract the driver somewhere easy to access.
Open Windows' Device Manager.
Plug in your phone during fastboot to your Windows PC.
Replace the "Unknown" entry for your phone with the Google driver in device manager, within the 60 second window it stays open in.
Note that you'll have to do this every time you go into fastboot.