Database Info

[CM12/12.1-UPDATED] S4 Display Color Profiles for CyanogenMod 11, 12, 12.1

### CM12(.1) UPDATE ### (see bottom)
Hey Folks,
are you also tired of the oversaturated colors of the S4 amoled display??
I found out that the S4minisettings.apk, that was originally developed for the S4 Mini by @F4k to regulate the saturation and other colour concerning features, does the job for the S4 aswell! It works very similar to the colour profiles built into samsung stock roms.
After installation you can find a new settings option "advanced settings" in systemsettings/display just like they're are built in into the carbon roms.
Installation:
Download the apk from the link below.
Then you have to manually put the s4minisettings.apk to /system/app and after that it's very important to set ownership and permissions as follows:
Owner: root, root
Permissions: rw,r,r (644)
reboot!
The main option to reduce the saturation is called "Mode - Set the mDNIe mode". I choose "natural" and the oversaturation of the display is gone!
Some other options don't apply until you switch screen off an on once.
___________________________________________________
The apk can be downloaded here:
http://forum.xda-developers.com/attachment.php?attachmentid=2443961&d=1386605141
original thread here (search for F4K's post):
http://forum.xda-developers.com/showthread.php?t=2558702&page=11
you may also want to have a look at s4miniarchive who did a good article/video about it:
http://www.s4miniarchive.com/2014/01/enable-color-saturation-galaxy-s4-mini-cyanogenmod11.html
all thanks go to @F4k for creating this nice apk!
###CM12(.1)-Instructions###
So, f4k made a new lollipop version of this tool S4MiniSettings and built it into his S4 Mini cm12 rom. I extracted it and offer it to you for download.
Instructions:
- extract zip
- copy the folder "S4Minisettings" to /system/app folder
- set permissions of the folder to rwxr-xr-x (755), the apk to rw-r--r-- (644)
- reboot
- after reboot there is a new icon in the app drawer
- if you prefered the setting "natural" from the kitkat version, now choose "movie"
Notes:
- Important: SELinux level higher than "strikt"/"enforcing" is needed to write to system folder and/or set permissions, and the apk to be loaded at boot. Custom kernels like Alucard mostly got SELinux set to "moderat".
- Don't be confused about the app name - it does work with the S4 - definitely!

Doesn't S4 4.4.2 have this by default? I can do same changes through my Display settings - no need for additional apk.

I use kernel perseus to better experience with real colors.
Enviado do meu GT-I9500

creage said:
Doesn't S4 4.4.2 have this by default? I can do same changes through my Display settings - no need for additional apk.
Click to expand...
Click to collapse
The "S4" has this by default in the Touchwiz ROM it ships with, but this thread is about CyanogenMod.
Speaking of which, it possible to adjust color cast in CM11 on my Note 8.0 under Display/Display Advanced. Maybe this feature will also come to CM11 on the i9500.

When i reboot nothing happends :/ i have everything like you said, bit it doestn appear. I have cm 11 snapshot m3, help?

Or does this only work on nightlies build?? :crying:

elmaku said:
When i reboot nothing happends :/ i have everything like you said, bit it doestn appear. I have cm 11 snapshot m3, help?
Click to expand...
Click to collapse
Did you set the permissions and owner correctly? Otherwise it can't work.

Peter Semper said:
Did you set the permissions and owner correctly? Otherwise it can't work.
Click to expand...
Click to collapse
the permissions are exactly like you have it, but still its not working. It doesnt scan my apps when I reboot :/. Also worth noting, every time i go to see the permissions or change it it says in a square. "The current file system is read-only. Do you want to remount as read-write and continue the operation?" I click yes, then i change it rw--r--r and reboot and nothing happends. When I go check it againg is the same prosses all over againg.
Edit: Also, in my settings I have Display & lights instead of "Display" as the video shows. I know nothing and I understand this may be a dumb question, but it may had to do with the problem? sorry.

Over-saturated colours of S4? Oh Dear Lord :|

elmaku said:
the permissions are exactly like you have it, but still its not working. It doesnt scan my apps when I reboot :/. Also worth noting, every time i go to see the permissions or change it it says in a square. "The current file system is read-only. Do you want to remount as read-write and continue the operation?" I click yes, then i change it rw--r--r and reboot and nothing happends. When I go check it againg is the same prosses all over againg.
Click to expand...
Click to collapse
Which file manager do you use? "root explorer" i.e. has sometimes problems and sais it's write protected. I use "root browser" which does a good job, mostly.

devilsdouble said:
Over-saturated colours of S4? Oh Dear Lord :|
Click to expand...
Click to collapse
killjoy

Peter Semper said:
Which file manager do you use? "root explorer" i.e. has sometimes problems and sais it's write protected. I use "root browser" which does a good job, mostly.
Click to expand...
Click to collapse
I have used both! and none of them works when I reboot . Man what a bad luck I have.

elmaku said:
I have used both! and none of them works when I reboot . Man what a bad luck I have.
Click to expand...
Click to collapse
And also tried the file manager provided with cm 11? Just have to "unleash" it in the options, I mean enable root mode.

Peter Semper said:
And also tried the file manager provided with cm 11? Just have to "unleash" it in the options.
Click to expand...
Click to collapse
Nope... just tried it and it doesnt optimize the apps when rebooting. I'm stuck.

elmaku said:
Nope... just tried it and it doesnt optimize the apps when rebooting. I'm stuck.
Click to expand...
Click to collapse
Very strange, you must have done something wrong.

Peter Semper said:
Very strange, you must have done something wrong.
Click to expand...
Click to collapse
I really don't understand :/... It is just not detecting it... maybe an option I have enable? I hate these saturated colors... :/ maybe it is only on nightlies?

Another options
splitterzelle said:
Hey Folks,
are you also tired of the oversaturated colours of the S4 amoled display??
I found out that the S4minisettings.apk, that was originally developed for the S4 Mini by F4K to regulate the saturation and other colour concerning features, does the job for the S4 aswell! It works very similar to the colour profiles built into samsung stock roms.
....
The apk can be downloaded here:
http://forum.xda-developers.com/attachment.php?attachmentid=2443961&d=1386605141
....
all thanks go to F4K for creating this nice apk!
Click to expand...
Click to collapse
This apk requires way too many permissions for the task it performs... Suspicious...
There is another option: KTweaker tool which comes with Ktoonsez kernels also allows to modify this setting (works with CM11 kernel, not only with Ktoonsez) .
After all this setting can be set via kernel "/sys" filesystem. From terminal emulator execute command:
Code:
echo 2 > /sys/class/mdnie/mdnie/mode
To make this change permanent (survive reboots and ROM updates) one may use init.d supplied with CM11, and create additional script in /data/local/ (in this location script will survive CM update).
Seems like init.d in CM11-M10 doesn't start scripts in /data/local/userinit.d/ directory, so the only option is to place script code to /data/local/userinit.sh
Permissions of this script must be set to 0755 (-rwxr-xr-x).
For anyone who interested in adopting this method I've prepared template script (also it sets some other available screen options, not only mode):
Code:
#!/system/bin/sh
# For SGS4 screen mode can be chosen from:
# 0 - STANDARD
# 1 - DYNAMIC
# 2 - MOVIE
# 3 - NATURAL
echo 3 > /sys/class/mdnie/mdnie/mode
# For SGS4 screen scenario can be chosen from:
# 0 - UI_MODE
# 1 - VIDEO_MODE
# 2 - VIDEO_WARM_MODE
# 3 - VIDEO_COLD_MODE
# 4 - CAMERA_MODE
# 5 - NAVI
# 6 - GALLERY_MODE
# 7 - VT_MODE
# 8 - BROWSER
# 9 - eBOOK
echo 0 > /sys/class/mdnie/mdnie/scenario
# Other parameters are boolean: 0 - Disabled, 1 - Enabled
echo 0 > /sys/class/mdnie/mdnie/negative
echo 0 > /sys/class/mdnie/mdnie/outdoor
Additionally I've prepared TWRP (CWM should work also, but I've not tested) installable version of this script (see attachment).
In that case if you dislike my default setting you'll need to unpack it, edit "data/local/userinit.sh" and pack it back using zip.
PS
This MAY work with other Samsung AMOLED devices. I can confirm that it works with galaxy tab 7.7 (p6800).

qolob said:
This apk requires way too many permissions for the task it performs... Suspicious...
Click to expand...
Click to collapse
It's not suspicious in any way! The developer f4k who wrote this little apk is a very honorable guy, just have a look at his profile and all of the work he does...
This apk does the job perfectly and doesn't do any harm to nothing.
Your remark/comment is very unnessessary here. So why don't you go start a thread your own instead of lousing this one up?

splitterzelle said:
It's not suspicious in any way! The developer f4k who wrote this little apk is a very honorable guy, just have a look at his profile and all of the work he does...
This apk does the job perfectly and doesn't do any harm to nothing.
Click to expand...
Click to collapse
I'm not trying to blame anyone in anything.
I'm not a pro in android programming and maybe such permissions are implied to all apk's that manage system settings.
However I can't see any reason for app that manages screen settings to require permissions to make calls, access user contacts etc. and it seems suspicious to me. That's all.
splitterzelle said:
Your remark/comment is very unnessessary here. So why don't you go start a thread your own instead of lousing this one up?
Click to expand...
Click to collapse
When I was searching how to setup screen settings in CM11 on SGS4 I've found only this thread. And when I've managed to solve this problem with alternative method I've decided that other users maybe interested in this information. I've posted to Your thread because I thought that it is a good idea to post all possible solutions for 'S4 amoled display colour profiles with cyanogenmod 11' in one thread to help other people find them quickly and in one place.
Sorry if I was wrong and violated something.

qolob said:
I'm not trying to blame anyone in anything.
I'm not a pro in android programming and maybe such permissions are implied to all apk's that manage system settings.
However I can't see any reason for app that manages screen settings to require permissions to make calls, access user contacts etc.
...
Sorry if I was wrong and violated something.
Click to expand...
Click to collapse
Mostly when there are high ranking permissions for an app requested, it isn't because of maliciousness of the author, it's often just carelessness of the creator not deactivating them in the building tool's presets he uses.
And after all, just don't be so mistrustful about things coming from senior xda developers......
This method I announced here is very simple to install, safe and works perfectly even with the latest nightlies so far.

[ROM][Umi Zero ] (UPDATE 02/11/15)Arcatarc's "EMUmIZERO"

(UPDATE 02/11/15)Version EMUmIZEROCompleta......full EMUI3 Experience!
For a SUPERLEGGERA (superlight) version of it check this thread: EMUmIZERO SUPERLEGGERA
******************************************************************************************************
INSTALLATION using ROOTJOY:
For the ones who prefer to flash the rom with ROOTJOY:
1: Download the Rom zip and replace " updater-script" inside folder "META-INF\com\google\android" with this one(unzip it before)
...now flash it by selecting the new created zip in rootjoy....that's all my friends...
******************************************************************************************************
INSTALLATION using CUSTOM RECOVERY (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-------------------IMPORTANT STEP----------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
THIS STEP IS VERY IMPORTANT BECAUSE MY TWRP MAKE A BACKUP OF VITAL PARTITIONS WHERE IS STORED IMEI,MAC ETC...
it's a good idea to copy the backup folder on your PC, it could be very useful in future in case of problem with missing IMEI and other trouble...
-------------------IMPORTANT STEP----------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (Without exit from recovery) Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on EMUmI!
******************************************************************************************************
IMPORTANT:
ALWAYS CHECK SERVICE PACKS THREAD and flash the latest one(if present)!
Before asking ALWAYS check TIPS SECTION,probably you will find (probably)a solution.
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS

Screenshots
Some Screenshots:

Service pack
Service pack:
Not needed in Rom UPDATE 02/11/15

ADDONS:
ADDONS:
Here you will find "MODULES" to install and obtain new functions:
For those having troubles with 3G data connection (check the frequencies supported by your mobile operator)(flashable in recovery without wipe):
BASEBANDS(Modem):
900 Mhz Baseband:
800/850/900 Mhz Baseband:
-------------------------------------------------------------------------------------------------------------------------------
EngineeringMode (Extract folder and install like normal apps)
MaxxAudioFx:
http://forum.xda-developers.com/android/general/maxx-audio-effects-mediatek-edition-t3044224
Am3D Zirene Audio Fx:
http://forum.xda-developers.com/android/development/sound-mod-am3d-zirene-audio-fx-t3152714
New Fonts:
http://forum.xda-developers.com/showthread.php?t=3032517
KERNELS:
(1.7Ghz)EMUmI_021105_DefaultKernel.zip (Default one included in rom zip,stablest and battery friendly)
(2.0Ghz)EMUmI_021105_Kernel.zip (Fastest but not underclockable)
All Kernels are flashable in RECOVERY.

CHANGELOG
CHANGELOG:
Installation script modifyed according with new (fixed) recovery....now both are "how they should be!".
Totally rebuild from newest Huawei firmware 268 Version.
Plenty of Optimizations and security Patches,included Stagefright bug
New Music app with Equalizer and full working songs dowload
New Baseband from stock Huawei firmware (better??)
Improved Camera
Improved GPS(agps enabled and editable in location setting).
Improved&Fixed all Sensors(now we have a full working compass!).
Added Compass app.
Re-edited new kernel with fix and optimizations.
Improved stability.
Full DTS Sound included!.
Huawei ID & related apps removed (not need to register to download themes).
Patched Service.jar(you can install engineering apps!..you can find them in ADDONS thread),many tnx to eryen :good:
Adopted some Folder&Files (from Huawei firmware)to menage various startup configurations(power policy,icons,toggles default home screen etc..).
Added "Motion control" in settings.
...probably some other things i don't remember..
Full working in every single function(exept the one mentioned in bugs thread)
.......FULL HUAWEI EMUI EXPERIENCE TRANSPLANTED TO UMI ZERO!.
NEW SECTION ADDED: "ADDONS":Her you will find "MODULES" to install and obtain new functions.
P.S.: Superleggera(Superlight) Version will be uploaded ASAP!

BUGS&TIPS
BUGS:
....probably you will find "G750-T20" or "Huawei" in some places:this is needed for the firmware to working(many libs and function refering to those names)
........
TIPS:
NVRAM WARNING: ERR 0x10 (& random WLAN MAC ADDRESS) ???....HERE THE DEFINITIVE SOLUTION
To download Themes and Songs remember to have simcard inserted and not to be in "Flight Mode":Those apps need to access your IMEI number to finalize autentication..
EMUmI is PREROOTED but there isn't the Supersu apk,all apps needing root will work well,i suggest to install SuperSu(from market) only if you need to manage apps permissions..
The rom is FULLY ODEXED (more stable&fast)....so is not reccomended using Titanium or similar app to remove and then restore apps:It will remove the related libs from system but it will not restore them...so i suggest to use it only if you know what you are doing..(to reinstall an app you need to extract the libs from his .apk and copy them to system/lib again.....)..however you can restore "Only data" of apps without problems.
Many Google related apps are not present(tts,search...)first of all to gain space,second because they are often updated....if you need them you can download from Market without problem..
How To Enable On Screen Soft Buttons:modify this line in build.prop:
#qemu.hw.mainkeys=0
TO
qemu.hw.mainkeys=0
(remember to left an empty line at the end of build.prop!)

First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app

Downloading, gonna test.
I hope huawei and lenovo will bring us more stable firmwares.
Thanks for porting.

Thank you very much for your job!

arna1958 said:
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can:mine is a modded version of it.....

Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:

River825 said:
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
Click to expand...
Click to collapse
Can you share some pros/cons compared with stock 3.05?

Hi
Rom is multilingual?

Does this ROM supports double tap to wake ? Are there ang chance that photos are better?

alvin2014 said:
Hi
Rom is multilingual?
Click to expand...
Click to collapse
Yes it is MultiLanguage...

mightystorm said:
Can you share some pros/cons compared with stock 3.05?
Click to expand...
Click to collapse
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet

River825 said:
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
Click to expand...
Click to collapse
Did have you try enabling DTS sound?

kovalski1 said:
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
Click to expand...
Click to collapse
I am also interested in the "double tap to wake" or so called "knock code".

JankyLV said:
I am also interested in the "double tap to wake" or so called "knock code".
Click to expand...
Click to collapse
I think it could be inplemented(lib files are included in system)i'll try....

Good work to continue. Congratulations. You ported the rom from which Huawei model. Thanks.
Sent from my HUAWEI MT7-TL10 using Tapatalk

LG G Flex 2 H959 Ultimate Mod Guide

(ATTENTION: Using this guide is your choice. I am not responsible if your phone gets bricked. All I'm doing is sharing my results so people can enjoy a better experience on their G Flex2, I do not know if this guide will work in anyone else's phone, I only know it worked on mine)
Hello, and welcome to my guide . I'm going to guide you through all the process I went through to install mods that will tweak your experience. The tweaks and mods used, are, as follows:
Audio Enhancement [Viper4Audio (credits to: users zhuhang and guitardedhero) Dolby Atmos (credits to: users guitardedhero and worstenbrood) and a modified mixer_paths profile (credits to: users paris07121978 and soosoolhastam)]
Camera Enhancement [modified camera_config and media_profiles (credits to: user jacksoncolocho)]
Screen And G4 Style-Tweaks [Flash-Mods (credits to: user bountyman334)]
Better Performance and Less Heat Output [modified thermal-engine-8994 (credits to: user probaina) tweaked interactive governors (credits to: users soosoolhastam and soniCron)]
Widened Scope of Phone Modifications [Xposed (credits to: user rovo89)]
Latest (Lollipop, Marshmallow on a locked bootloader is not rootable yet) Software Rooted Image (as of 5th of June, 2016) [15e rootedsystem image (credits to: user kevin3688)]
(I'm so sorry if I let anyone out, if I forgot to credit someone, please reply and I'll add him/her)
TL;DR, here's the guide:
1. (If you haven't already) Flash this image (https://drive.google.com/file/d/0B0UblGbOPFYBT2RERDZKcUhqcnM/view) on your phone, with this guide (http://forum.xda-developers.com/g-flex2/general/lg-h959-v15a-rooted-andriod-5-1-1-t3178517). Note that that flash command works for the 15e image. Now you have the latest software version.
2. Download and Install (on your phone) FlashFire, from the google store (yes, from the google store, not the old 0.24 version).
3. Download and install Stericon's busybox from the play store.
4. Download XposedInstaller.apk into your phone and also download the zip file (the one you'll flash with FlashFire), which has to be from sdk22 (that's for android 5.1.1) and from arm64 (http://forum.xda-developers.com/showthread.php?t=3034811). Make sure to download the latest one. Now open Flashfire and flash the zip file (+ button, tap on flash zip or ota, select the zip file to the downloaded location, and uncheck mount read/write, then tap on flash). Afterwards, install the downloaded XposedInstaller.apk on your phone and open it. You are now able to use Xposed, which is a unique framework that allows you to download modules, which are "apps" that can change your phone in a lot of ways, way more than a regular app, I think. To install modules, open the XposedInstaller and... you'll figure it out.
5. Downgrade your flashfire app into the 0.24 version, by uninstalling it and installing this version instead (http://flashfireapk.com/flashfire-0.24.apk).
6. Flash the mod (same thing as before, but now there's only the auto-mount option, don't check it) provided by this thread, look for the h959 link (http://forum.xda-developers.com/g-flex2/development/dec-21-stock-lollipop-flex-2-ls996-t3275531). Download it (on your phone) and flash it with FlashFire (it might take a while). Now you should have a slightly better screen, G4 design changes and other tweaks to your phone.
7. Uninstall flashfire 0.24 and install the version from the google store again.
8. Download the Dolby Atmos zip file (http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446) and flash it with FlashFire (same thing as before, now there are more options again, uncheck mount read/write again). You should now have a dolby atmos app on your app drawer, it uses an intelligent equalizer and other cool stuff to make your audio sound better. Tweak it to your liking.
9. Download the zip file "ViperAtmos x (x represents the latest version, 5.5 as of now) sony beats edition" (link: http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075) (that "sony beats edition" is not completely necessary, so if in a future version it's not there anymore, don't worry about it). But don't flash it. Instead, copy the content of that zip file to your root folder (mount the folder as read/write with your file explorer and overwrite what's already there) (the lowest/highest folder on your phone, it's not accessible via pc, only via a root browser). The folder can also be called "system(root)" or a hashtag or just "/", don't confuse it with the folder named root that is inside "/" or the folder "system" that is also inside "/". If any files couldn't be placed, like for example audio_effects.conf, try finding that file (it's in "vendor/ect", "system/etc" and "system/vendor/etc") and mount that file read/write, now try copying and pasting again, if it doesn't work again try rebooting and trying again. Open the V4A (V4A stands for Viper4Android) app, it may say to install drivers or it might be already installed, if it says install drivers tap on ok. It will say drivers are installed, so reboot.
10. Download and install SE Linux Mode Changer (http://forum.xda-developers.com/showthread.php?t=2524485), give it root permission and change the mode to permissive. Now Viper4Android and Dolby Atmos should be working together. Viper4Android is an audio tweaking tool that enhances your listening experience, and gives you a range of customization to do so. Tweak it to your liking.
11. Download the following file: http://forum.xda-developers.com/attachment.php?attachmentid=3566699&d=1449390187 (delete the mixer_paths from that zip file). Also download the mixer_paths file from this thread (http://forum.xda-developers.com/g-flex2/development/surround-mode-h955-t3376881), look for the latest post of the user "soosoolhastam" on that thread, the one where he uploaded his modification of the mixer_paths file. Also download the thermal-engine-8994 file from Probaina here (http://forum.xda-developers.com/g-flex2/general/thermal-throttling-hotplug-settings-t3106165), it's in a reply he made to his own thread, it's on the first page. Now that all those files are on your phone, use a root text editor (the only one that worked for me is the app QuickEdit) to copy the content of all those files, and replace the content from the files (with the same name) on the folder /etc. Don't replace the files, since that "broke" my phone, just replace the text content of those files with the content of the files you downloaded, that have the same name. Now you have unlocked 60fps on your camera, your photos are now all stored with 100% quality, your audio has a higher volume and it's more surround, and your phone should heat up less.
12. Download the file "init.qcom.post_boot_xxxxxx.zip" (again, the Xs represent whatever the latest version is, choose the biggest number, not the "original" version) from here (http://forum.xda-developers.com/g-flex2/general/tweak-interactive-governor-lag-battery-t3371210). Extract the file and navigate to the folder GhostPepperVx (x=latest version) (you can choose from the other folders if you want, they have different cpu governors, if you want to try another one) then copy the file "init.qcom.post_boot" inside that folder into system/etc. Make sure your phone is not overheated (since that changes things).
13.Wipe dalvik cache with flash fire to cleanup your phone after all the flashes and stuff. There. Now your phone should be better in every way!

so, i preciate all your work...really, this thread will help a lot of people, this AIO is really exelent, conglats!
now, the G4 Mod with Bravia engine, all sxstem icons and apps will be like g4 sure?? or only 2 or 3?? tell me, i never flash it bcs i never know.

Will work on H955?

oskarmaly said:
Will work on H955?
Click to expand...
Click to collapse
Sorry mate, but at least flashing the h959 rooted image won't work, certainly. And I'm not sure how the installation would go in your model. I'm really sorry, I wish I could help.

copy2050 said:
so, i preciate all your work...really, this thread will help a lot of people, this AIO is really exelent, conglats!
now, the G4 Mod with Bravia engine, all sxstem icons and apps will be like g4 sure?? or only 2 or 3?? tell me, i never flash it bcs i never know.
Click to expand...
Click to collapse
The G4 mod changes a lot of things, some things I didn't even like, like the phone dialer and the contacts design, but I'm keeping it because of the rest of the things that come with the mod. I'll list the things I noticed until now: changes (very minor) to the little menu that pops up when you slide down, it adds a button (an engine icon) to access settings faster (was it already there?), and by its side there's a button that redirects you to a menu where you can change "users", not quite sure how that works, the default calling app is completely changed, I think the design changes are from G4. When you insert headphones/usb a little menu pops up, I just checked and apparently it's a feature called "plug and pop apps", one of the apps that is shown by default is the music app. The mod adds a new app to the menu drawer, called "QTheater", not sure what it does yet. Clock app looks unchanged, gallery app has a new icon, but aside from that nothing's changed there. Quickmemo+ seems also unchanged. Music app is... A little different. Kinda uglier, in my opinion, really. Calculator's the same. Camera app is the same. OOH! Never mind, gallery app is so much better, I really can't describe well what I'm seeing here, you'll have to try it out for yourself. Calendar app just changed to color of the (orange or red?) on it to a more orange one. Email app is the same (who uses that app?). Tasks app is the same. Weather app is also the same. Voice recorder is the same. Dunno if Voice Mate app is changed, never paid attention to it. Update center app is the same. Settings app has a dramatic design change. A bunch of new features on the settings app, including a setting for the phone to read messages out loud. Holy moly so many new features in the settings app. I think that's it. Until now I haven't noticed any other differences until now. You can install a module for Xposed to get more g4 tweaks, including the option to record your calls! Sorry if I missed anything.

can it be removed/uninstalled if we do not like it?

soosoolhastam said:
can it be removed/uninstalled if we do not like it?
Click to expand...
Click to collapse
I'm not sure but I think so. But I am sure you can always re-flash the 15e image (that'll erase all the mods, and don't worry, it won't erase any of your data, only the mods), and you can follow the guide without installing the mods you don't like, like the g4 tweaks mod.

Permanently Closed

XDA:DevDB Information
Permanently Closed, ROM for the AT&T Samsung Galaxy S4
Contributors
CIGBURN
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Build Any + SafeStrap + PC
Based On: STOCK I337 OC3 "Completely Fixed Audio, with procedures..."
Version Information
Status: No Longer Updated
Current Stable Version: OC3 5.0.1 FINAL
Stable Release Date: 2020-03-19
Created 2017-08-22
Last Updated 2020-05-31

My Work & Installation Procedure:
Permanently Closed

Presets for audio?
Permanently Closed

Is for i337?
Sent from my ONEPLUS A3000 using XDA Labs

anderson79 said:
Is for i337?
Sent from my ONEPLUS A3000 using XDA Labs
Click to expand...
Click to collapse
Yes this is for i337

Will try later on, thanks

CIGBURN said:
Yes this is for i337
Click to expand...
Click to collapse
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Sent from my ONEPLUS 3T using XDA Labs

anderson79 said:
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Click to expand...
Click to collapse
When I get home today I am releasing Lollipop with Work Arounds unfortunately but a 100% Xposed OC4 + Dolby Atmos + Dolby Digital Plus + Waves MaxxAudio + Noozxoide EZIO-rewire PRO + ViPER4Android FX + ViPER4Android XHiFi + AM3D Zirene Sound All In One SafeStrap /system Backup.

anderson79 said:
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Sent from my ONEPLUS 3T using XDA Labs
Click to expand...
Click to collapse
Updated with embedded links EVERYTHING IS FINAL!
CIGBURN said:
What Work have you done?:
All of the work to get this working and all in one plus mods for you on Stock OC4 is all by me!
I have gathered all the essential files for you.
Give you my bullet proof install procedure.
Add all my special tweaks and gatherings from all over xda.
Help by sharing all of getting this working Audio Engine + Presets
Pre-Install Requirements:
THIS PROCEDURE REQUIRES THE USE OF A PC!​This thread assumes that you are running Stock Build NB1 or up to build NJ4 with SafeStrap installed. If you are not then please do the following...​
1: Download This -> https://www.mediafire.com/file/v9uxcvecc06f3rb/Install Prep.7z
2: Extract Install Prep.7z to your computer
3: Use the Samsung Flash folder to open Odin and Flash NB1.tar.md5
4: Boot NB1
5: Copy and install all three apps in the archive to get SafeStrap
Installation Procedure:
1: Extract HEX FX Fire Final TouchWiz.7z
2: Copy the HEX FX Fire Final TouchWiz folder to /sdcard/TWRP/BACKUPS/(SERIAL NUMBER)/
3: Restore HEX FX Fire Final TouchWiz in SafeStrap
4: Full Dalvik Data & Cache Wipe your device
5: Delete SafeStrap while in SafeStrap (Mount - /system) (Advanced - File Manager - Navigate to /system/etc/safestrap - Select Folder & Delete)
6: REBOOT TO DOWNLOAD MODE
7: Odin the OC4 Bootloader
8: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
9: Odin the OC4 Kernel
10: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
11: Odin the OC4 Modem
12: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
13: Odin the OC4 Recovery
14: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
15: Reboot to Success!
16: Install Nooz FX
17: DONE!
Experiencing Problems with the Audio Engine?
1: Extract HEX FX Fixes
2: Use root explorer to copy system to /system
3: Reboot
Boot Animation + Sound Change:
1: Extract Boot Animation.7z
2: Use root file explorer to copy the files to /system/media
3: DONE!
Click to expand...
Click to collapse

SuperBrolySSJ said:
Will try later on, thanks
Click to expand...
Click to collapse
Thank You let me know how it goes! Also I updated the instructions for fixing HEX FX
CIGBURN said:
Experiencing Problems with the Audio Engine?
1: ViPER4Android Should Boot as Running before flashing this, A First Boot is Required do not copy via SafeStrap!
2: Extract HEX FX Fixes
3: DELETE RESIDUAL MAXX FX FILES! or you will get FCs
Folders:
/system/priv-app/
-MaxxAudio Folder
-MaxxService Folder
Files:
/system/lib
-libMA3-wavesfx-Coretex_A9.so
/system/lib/soundfx
-libmaxxeffect-cembedded.so
4: Use root explorer to copy system to /system
5: Reboot
6: If ViPER4Android FX or XHiFi Breaks (Check Via Driver Status) Continue
7: Move the etc folder found via /system/vendor/ to a secure location
8: Reboot Check V4A FX & XHiFi Status
9: Replace etc folder from the secure location back to /system/vendor
Still Not Fixed?
-Take the /system/vendor/etc/audio_effects.conf
-Verify with text viewer that Maxx FX libs are in it
-Move the file to system/etc
-Completely remove the etc folder from /system/vendor
10: Done!
Click to expand...
Click to collapse

anderson79 said:
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Sent from my ONEPLUS 3T using XDA Labs
Click to expand...
Click to collapse
Updated HEX FX Fixes Instructions!
CIGBURN said:
Experiencing Problems with the Audio Engine?
1: ViPER4Android Should Boot as Running before flashing this, A First Boot is Required do not copy via SafeStrap!
2: Extract HEX FX Fixes
3: DELETE RESIDUAL MAXX FX FILES! or you will get FCs
Folders:
/system/priv-app/
-MaxxAudio Folder
-MaxxService Folder
Files:
/system/lib
-libMA3-wavesfx-Coretex_A9.so
/system/lib/soundfx
-libmaxxeffect-cembedded.so
4: Use root explorer to copy system to /system
5: Reboot
6: If ViPER4Android FX or XHiFi Breaks (Check Via Driver Status) Continue
7: Move the etc folder found via /system/vendor/ to a secure location
8: Reboot Check V4A FX & XHiFi Status
9: Replace etc folder from the secure location back to /system/vendor
Still Not Fixed?
-Take the /system/vendor/etc/audio_effects.conf
-Verify with text viewer that Maxx FX libs are in it
-Move the file to system/etc
-Completely remove the etc folder from /system/vendor
10: Done!
Click to expand...
Click to collapse

Looking good!!! Thank you so much for putting all this effort into this. Especially loving all the audio tweaks! Sorry for the late reply, I've been super busy.
Also just got a Galaxy Tab s2 2016 with oem unlock capability (yay).
About Xposed. Xposed for lollipop safemode was disabled due to knox incompatibility, leading to hard issues if you got an Xposed module bootloop. I created a way to fix this. If you want, it could be a nice feature for users I think

BBRecon said:
Looking good!!! Thank you so much for putting all this effort into this. Especially loving all the audio tweaks! Sorry for the late reply, I've been super busy.
Also just got a Galaxy Tab s2 2016 with oem unlock capability (yay).
About Xposed. Xposed for lollipop safemode was disabled due to know incompatibility, leading to hard issues if you got an Xposed module bootloop. I created a way to fix this. If you want, it could be a nice feature for users I think
Click to expand...
Click to collapse
Awesome! I will look into this. Also if you get v4a errors be sure to check the change log in the OP to fix it. Furthermore now that the ROM is as final as I can get it I'll be releasing better presets for all audio apps starting with v4a. One last thing let me know if your Galaxy tab has a qcom processor I'd love to help you get an audio engine on it. If it has an Exynos processor I'd really love to test, I've never had that processor so I don't yet know if it is fully capable with all the audio stuff

CIGBURN said:
Awesome! I will look into this. Also if you get v4a errors be sure to check the change log in the OP to fix it. Furthermore now that the ROM is as final as I can get it I'll be releasing better presets for all audio apps starting with v4a. One last thing let me know if your Galaxy tab has a qcom processor I'd love to help you get an audio engine on it. If it has an Exynos processor I'd really love to test, I've never had that processor so I don't yet know if it is fully capable with all the audio stuff
Click to expand...
Click to collapse
I'm on the qcom 652 model, but I decided not to alter the system because I don't want to void my warranty. Someday I'd totally install some cool things like magisk... Is a shame I can't do that without voiding my warranty :/

Possibly a dumb question, but will this work on the MDL bootloader using loki doki?

StoneyJSG said:
Possibly a dumb question, but will this work on the MDL bootloader using loki doki?
Click to expand...
Click to collapse
I have no idea but I would advise against installing this. I made it for locked devices only. If you have full twrp with the capability of installing cyanogenmod etc... Then pick your favorite rom install it then come back here and give me the details so I can get a port of SoundAlive on it and all the other 7 audio apps as well! If you have the time I would love to have you test a port I have been meaning to test, but I dont have a snapdragon chipset with custom rom capability just yet. Also dont install the Galaxy S5's version of SoundAlive. I tried to port it a few days ago. I got the S5's version to process the audio but it doesnt work with all the other apps like the version installed to the Galaxy S4, furthermore I found that with the Galaxy S4 none of the configured libs in the audio_effects.conf file are required to get SoundAlive to process the audio unlike the version on the Galaxy S5. But I'm looking forward to helping you out, so let me know and dont install this rom it may break loki capability.

StoneyJSG said:
Possibly a dumb question, but will this work on the MDL bootloader using loki doki?
Click to expand...
Click to collapse
Turns out there are multiple courses you can go. You can install this but Do Not Flash OK2 Bootloader. But if I had loki I would install marshmallow and then install my latest audio engine for marshmallow found here -> https://forum.xda-developers.com/showthread.php?t=3655177

CIGBURN said:
Turns out there are multiple courses you can go. You can install this but Do Not Flash OK2 Bootloader. But if I had loki I would install marshmallow and then install my latest audio engine for marshmallow found here -> https://forum.xda-developers.com/showthread.php?t=3655177
Click to expand...
Click to collapse
Awesome, I would like to try it but don't want to lose my Loki capabilities so I won't flash the bootloader. Since I like touch wiz, right now I am running golden eye rom 5.0 lollipop with imperium kernel. I don't have TWRP, but I do have CWM recovery by shabby penguin installed. I know it's old, but still works good.

StoneyJSG said:
Awesome, I would like to try it but don't want to lose my Loki capabilities so I won't flash the bootloader. Since I like touch wiz, right now I am running golden eye rom 5.0 lollipop with imperium kernel. I don't have TWRP, but I do have CWM recovery by shabby penguin installed. I know it's old, but still works good.
Click to expand...
Click to collapse
I heard that flashing anything in Odin breaks Loki!
Honestly I still wouldn't flash this. I would hate for you to lose Loki. Go to my Galaxy S4 HEX FX thread if that's what you interested in. Then flash that on your current ROM. Make sure no other audio mods are installed.
Thread located here -> https://forum.xda-developers.com/showthread.php?t=3655177

StoneyJSG said:
Awesome, I would like to try it but don't want to lose my Loki capabilities so I won't flash the bootloader. Since I like touch wiz, right now I am running golden eye rom 5.0 lollipop with imperium kernel. I don't have TWRP, but I do have CWM recovery by shabby penguin installed. I know it's old, but still works good.
Click to expand...
Click to collapse
If you still want to try, you will need TWRP to restore system then instead of using Odin to flash install a custom Loki kernel instead. Don't flash the ROM zip that will definitely break Loki and don't Odin anything. If it does boot the custom kernel then go back to what you had and flash the audio engine

Improved Audio on Oreo Custom ROMs (Ainur Sauron)

I am part of the team for Ainur Sauron, and I am here to present improved audio on the Le Max 2. Sauron has a userconfig which can be adjusted. Download the latest from there and place the attached file at /sdcard before installing. Make sure to remove the '.txt' at the end of the file too! Enjoy :victory:
Impedance is currently set to 16Ω which can be changed to whatever you desire. To set edit the attached sauron_useroptions file and change qc.impedance to whatever your headphones impedance is in Ohms multiplied by 1000 (eg. for 22Ω it would be 22000).
Tested by @I_Raptor_I on his x2, if it doesn't work just send me a log
EDIT: Attached the file

I did not know that anyone else was using Ainur Sauron on LeX2 It really improves the audio quality significantly on Oreo!
Quick question - why does it say "Axon 7" during installation procedure?

LazerL0rd said:
I am part of the team for Ainur Sauron, and I am here to present improved audio on the Le Max 2. Sauron has a userconfig which can be adjusted. Download the latest from there and place the attached file at /sdcard before installing. Make sure to remove the '.txt' at the end of the file too! Enjoy :victory:
Impedance is currently set to 16Ω which can be changed to whatever you desire. To set edit the attached sauron_useroptions file and change qc.impedance to whatever your headphones impedance is in Ohms multiplied by 1000 (eg. for 22Ω it would be 22000).
Tested by @I_Raptor_I on his x2, if it doesn't work just send me a log
EDIT: Attached the file
Click to expand...
Click to collapse
Hi, I download and flash the version MK II but can't see any app for setting my personal audio. How it works?

GaetanoS.89 said:
Hi, I download and flash the version MK II but can't see any app for setting my personal audio. How it works?
Click to expand...
Click to collapse
Hello GaetanoS.89, first things first uninstall the MK II Magisk module. Now place the given text file in /sdcard folder, then go and flash that module again, it should state that it has detected the user options text file and that's it.

I_Raptor_I said:
Hello GaetanoS.89, first things first uninstall the MK II Magisk module. Now place the given text file in /sdcard folder, then go and flash that module again, it should state that it has detected the user options text file and that's it.
Click to expand...
Click to collapse
I have not installed magisk n the smartphone.
Can you tell me how I can uninstall it?
Do I need magisk to let work this audio mod?
Thanks

GaetanoS.89 said:
I have not installed magisk n the smartphone.
Can you tell me how I can uninstall it?
Do I need magisk to let work this audio mod?
Thanks
Click to expand...
Click to collapse
Magisk isn't needed as it'll install with any configuration. All you need to do is placed the attched file at /sdcard (called Internal Storage) and rename it to sauron_useroptions (remove the .txt. at the end).

LazerL0rd said:
Magisk isn't needed as it'll install with any configuration. All you need to do is placed the attched file at /sdcard (called Internal Storage) and rename it to sauron_useroptions (remove the .txt. at the end).
Click to expand...
Click to collapse
Did it, and after What I have to do?

@Lazerlord: I tried your mod today by described method.
I copied "sauron_useroptions" into sdcard folder by TWRP file explorer.
Afterwards I flashed latest zip (17.03.) using TWRP. Everything was fine with it during this.
Wiped chache and dalvik and rebooted without any problems.
Result: No ringtone anymore, no message sound, but media sound works fine and was adjustable, no app or menue occoured in regard to your mod. I did not check more.
I could succesfully remove your mod by described method (flash again same file from TWRP)
After removal everything was fine as before :good:
My Phone: X829 with latest AEX 8.1 using Magisk 16.0

123Bart said:
@Lazerlord: I tried your mod today by described method.
I copied "sauron_useroptions" into sdcard folder by TWRP file explorer.
Afterwards I flashed latest zip (17.03.) using TWRP. Everything was fine with it during this.
Wiped cache and dalvik and rebooted without any problems.
Result: No ringtone anymore, no message sound, but media sound works fine and was adjustable, no app or menue occoured in regard to your mod. I did not check more.
I could succesfully remove your mod by described method (flash again same file from TWRP)
After removal everything was fine as before :good:
My Phone: X829 with latest AEX 8.1 using Magisk 16.0
Click to expand...
Click to collapse
Ah, well could you follow these instructions on the main thread which say "help to extend features". It'll help us fix those issues. :good:
How was the media sound though? Did it sound better according to you?

LazerL0rd said:
Ah, well could you follow these instructions on the main thread which say "help to extend features". It'll help us fix those issues. :good:
How was the media sound though? Did it sound better according to you?
Click to expand...
Click to collapse
I removed the "sauron_useroptions" from sdcard folder (as it was described in the file itself, that UO is not mandatory) and reflashed the zip-file again.
With this way everything works !
Will read a little bit the instructions now...
Generaly I have to say I am using Leeco CDLA as headphones atm which are extraordinary by themselves.
So maybe I will use adapter for 3,5mm jack whithin next days and try some user options. Leeco Loadspeaker judgement is difficult imho.
Also new AEX is very good ROM in regard to speaker sound I have to say.

On Oreo 8.1.0. PixelRevenge 15.1 works very well in music playback. He gave me a strange problem. I removed the system camera that I can not install anymore. I had to put another one. I have not tried calls and notifications yet
edit:- Notifications and ringtones ok. In-call audio worsened, the voice is less clear. In speakerphone there is a loud hiss that makes the speakerphone unusable

RISS23 said:
On Oreo 8.1.0. PixelRevenge 15.1 works very well in music playback. He gave me a strange problem. I removed the system camera that I cannot install anymore. I had to put another one. I have not tried calls and notifications yet
edit:- Notifications and ringtones ok. In-call audio worsened, the voice is less clear. In speakerphone, there is a loud hiss that makes the speakerphone unusable
Click to expand...
Click to collapse
We're working on a fix for the mixer_paths that'll correct notifications, ringtones, and other audio. I'm happy that you're enjoying music playback. However, the system camera app problem is nothing to do with Sauron it's probably a ROM issue, or possibly even a Magisk issue.

I've installed this Mod by using Magisk 16.0 (v5.6.4) on RR 6.0(22-03-18).
Before I did this I placed the file sauron_useroptions to /sdcard folder.
During the installation Magisk showed that the useroption file was found and used for the installation.
In Poweramp I get the message that there is a problem with app native libraries (libampffmpeg.so).
I don't know whether the error message has something to do with that, but the volume control in Poweramp after flashing this modul is faulty.
Just when the volume is set the half I can hear anything. The volume control steps seems to be broken, but just in Poweramp.(After uninstalling, the issue is gone, but the error message is still sthere)
In other Apps the volume control is normal.
Since I use RR 6.0(8.1) instead of RR 5.8.5(7.1.2) the speaker sounds cheap tinny - Ainur Sauron didn't help to solve this issue. I removed AudioFX, can this be the reason?
It's difficult to describe the issue "cheap tinny", but I think the audio drivers have problems to divorce the difference frequences.
On RR 5.85. the speaker was more "smooth" and the frequences were divorced much better.
Sorry for my bad english and the critic. I think I'm an individual case and other people don't have the problems which I have, but in my case, the Mod seems not to improve the audio quality.

Azubi96 said:
I've installed this Mod by using Magisk 16.0 (v5.6.4) on RR 6.0(22-03-18).
Before I did this I placed the file sauron_useroptions to /sdcard folder.
During the installation Magisk showed that the useroption file was found and used for the installation.
In Poweramp I get the message that there is a problem with app native libraries (libampffmpeg.so).
I don't know whether the error message has something to do with that, but the volume control in Poweramp after flashing this modul is faulty.
Just when the volume is set the half I can hear anything. The volume control steps seems to be broken, but just in Poweramp.(After uninstalling, the issue is gone, but the error message is still sthere)
In other Apps the volume control is normal.
Since I use RR 6.0(8.1) instead of RR 5.8.5(7.1.2) the speaker sounds cheap tinny - Ainur Sauron didn't help to solve this issue. I removed AudioFX, can this be the reason?
It's difficult to describe the issue "cheap tinny", but I think the audio drivers have problems to divorce the difference frequences.
On RR 5.85. the speaker was more "smooth" and the frequences were divorced much better.
Sorry for my bad english and the critic. I think I'm an individual case and other people don't have the problems which I have, but in my case, the Mod seems not to improve the audio quality.
Click to expand...
Click to collapse
I've heard from @I_Raptor_I that RR already has a loss in audio quality. I advise the use of another ROM and if the tinnyness persists use the attached Sauron zip.
The Poweramp problem is probably due to DVC (Direct Volume Control) in their FAQ they state it may cause issues with 24-bit or HQ audio. The native libraries issue is not related to Ainur as it doesn't touch that file.
About the audio. ROM (which Sauron edits) isn't the only thing that contributes. the HAL and kernel do too, so RR's bad audio may not be able to be fixed or corrected by Ainur but we'll take a look into it.

Ok guys, @LazerL0rd is kindly developing a very nice Oreo kernel for our Le Max 2 improving the speeds dramatically and most importantly audio, he has already optimized our Qualcomm DSP, expect a very nice audio experience on Oreo from now on so stay tuned and make sure to thank LazerL0rd for his hard work, he doesn't even have a Le Max 2 and yet he is spending hours making this kernel for us

Magisk viper?
I have installed viper on RR Oreo via magisk and audio quality is now on point with how it worked through flashing viper and Dolby Atmos on the nugart RR via twrp. There are a couple of things to consider though, viper must be activated before listening to music through your app, viper does not work over Bluetooth by default in viper meaning you must go to viper settings and set mode to compatibility from normal and then viper will work over Bluetooth. The last thing, and I can't remember if this was true on nugart but viper seams to only work with music that you have downloaded to your device and will not work with streaming music from the web.

mikedavo said:
I have installed viper on RR Oreo via magisk and audio quality is now on point with how it worked through flashing viper and Dolby Atmos on the nugart RR via twrp. There are a couple of things to consider though, viper must be activated before listening to music through your app, viper does not work over Bluetooth by default in viper meaning you must go to viper settings and set mode to compatibility from normal and then viper will work over Bluetooth. The last thing, and I can't remember if this was true on nugart but viper seams to only work with music that you have downloaded to your device and will not work with streaming music from the web.
Click to expand...
Click to collapse
To fix streamed music install universal deep buffer remover magisk module by @Zackptg5 , it's on the repo too.

I_Raptor_I said:
Ok guys, @LazerL0rd is kindly developing a very nice Oreo kernel for our Le Max 2 improving the speeds dramatically and most importantly audio, he has already optimized our Qualcomm DSP, expect a very nice audio experience on Oreo from now on so stay tuned and make sure to thank LazerL0rd for his hard work, he doesn't even have a Le Max 2 and yet he is spending hours making this kernel for us
Click to expand...
Click to collapse
Kernel released and in Havoc OS. Source is https://github.com/Havoc-Devices/android_kernel_leeco_msm8996. I'll update personal repo and both to 3.18.108 soon.

does it work on xiaomi mi 6 miui 9? Android 8.0
Wysłane z mojego MI 6 przy użyciu Tapatalka

LazerL0rd said:
Kernel released and in Havoc OS. Source is https://github.com/Havoc-Devices/android_kernel_leeco_msm8996. I'll update personal repo and both to 3.18.108 soon.
Click to expand...
Click to collapse
waitting for the update, thanks