XDA:DevDB Information
Permanently Closed, ROM for the AT&T Samsung Galaxy S4
Contributors
CIGBURN
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Build Any + SafeStrap + PC
Based On: STOCK I337 OC3 "Completely Fixed Audio, with procedures..."
Version Information
Status: No Longer Updated
Current Stable Version: OC3 5.0.1 FINAL
Stable Release Date: 2020-03-19
Created 2017-08-22
Last Updated 2020-05-31
My Work & Installation Procedure:
Permanently Closed
Presets for audio?
Permanently Closed
Is for i337?
Sent from my ONEPLUS A3000 using XDA Labs
anderson79 said:
Is for i337?
Sent from my ONEPLUS A3000 using XDA Labs
Click to expand...
Click to collapse
Yes this is for i337
Will try later on, thanks
CIGBURN said:
Yes this is for i337
Click to expand...
Click to collapse
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Sent from my ONEPLUS 3T using XDA Labs
anderson79 said:
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Click to expand...
Click to collapse
When I get home today I am releasing Lollipop with Work Arounds unfortunately but a 100% Xposed OC4 + Dolby Atmos + Dolby Digital Plus + Waves MaxxAudio + Noozxoide EZIO-rewire PRO + ViPER4Android FX + ViPER4Android XHiFi + AM3D Zirene Sound All In One SafeStrap /system Backup.
anderson79 said:
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Sent from my ONEPLUS 3T using XDA Labs
Click to expand...
Click to collapse
Updated with embedded links EVERYTHING IS FINAL!
CIGBURN said:
What Work have you done?:
All of the work to get this working and all in one plus mods for you on Stock OC4 is all by me!
I have gathered all the essential files for you.
Give you my bullet proof install procedure.
Add all my special tweaks and gatherings from all over xda.
Help by sharing all of getting this working Audio Engine + Presets
Pre-Install Requirements:
THIS PROCEDURE REQUIRES THE USE OF A PC!This thread assumes that you are running Stock Build NB1 or up to build NJ4 with SafeStrap installed. If you are not then please do the following...
1: Download This -> https://www.mediafire.com/file/v9uxcvecc06f3rb/Install Prep.7z
2: Extract Install Prep.7z to your computer
3: Use the Samsung Flash folder to open Odin and Flash NB1.tar.md5
4: Boot NB1
5: Copy and install all three apps in the archive to get SafeStrap
Installation Procedure:
1: Extract HEX FX Fire Final TouchWiz.7z
2: Copy the HEX FX Fire Final TouchWiz folder to /sdcard/TWRP/BACKUPS/(SERIAL NUMBER)/
3: Restore HEX FX Fire Final TouchWiz in SafeStrap
4: Full Dalvik Data & Cache Wipe your device
5: Delete SafeStrap while in SafeStrap (Mount - /system) (Advanced - File Manager - Navigate to /system/etc/safestrap - Select Folder & Delete)
6: REBOOT TO DOWNLOAD MODE
7: Odin the OC4 Bootloader
8: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
9: Odin the OC4 Kernel
10: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
11: Odin the OC4 Modem
12: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
13: Odin the OC4 Recovery
14: HOLD VOL-DOWN BEFORE ODIN REBOOTS YOUR PHONE!
15: Reboot to Success!
16: Install Nooz FX
17: DONE!
Experiencing Problems with the Audio Engine?
1: Extract HEX FX Fixes
2: Use root explorer to copy system to /system
3: Reboot
Boot Animation + Sound Change:
1: Extract Boot Animation.7z
2: Use root file explorer to copy the files to /system/media
3: DONE!
Click to expand...
Click to collapse
SuperBrolySSJ said:
Will try later on, thanks
Click to expand...
Click to collapse
Thank You let me know how it goes! Also I updated the instructions for fixing HEX FX
CIGBURN said:
Experiencing Problems with the Audio Engine?
1: ViPER4Android Should Boot as Running before flashing this, A First Boot is Required do not copy via SafeStrap!
2: Extract HEX FX Fixes
3: DELETE RESIDUAL MAXX FX FILES! or you will get FCs
Folders:
/system/priv-app/
-MaxxAudio Folder
-MaxxService Folder
Files:
/system/lib
-libMA3-wavesfx-Coretex_A9.so
/system/lib/soundfx
-libmaxxeffect-cembedded.so
4: Use root explorer to copy system to /system
5: Reboot
6: If ViPER4Android FX or XHiFi Breaks (Check Via Driver Status) Continue
7: Move the etc folder found via /system/vendor/ to a secure location
8: Reboot Check V4A FX & XHiFi Status
9: Replace etc folder from the secure location back to /system/vendor
Still Not Fixed?
-Take the /system/vendor/etc/audio_effects.conf
-Verify with text viewer that Maxx FX libs are in it
-Move the file to system/etc
-Completely remove the etc folder from /system/vendor
10: Done!
Click to expand...
Click to collapse
anderson79 said:
Being on android 4.4.4 I have to do to install the ROM, just install the ROM and now?
Sent from my ONEPLUS 3T using XDA Labs
Click to expand...
Click to collapse
Updated HEX FX Fixes Instructions!
CIGBURN said:
Experiencing Problems with the Audio Engine?
1: ViPER4Android Should Boot as Running before flashing this, A First Boot is Required do not copy via SafeStrap!
2: Extract HEX FX Fixes
3: DELETE RESIDUAL MAXX FX FILES! or you will get FCs
Folders:
/system/priv-app/
-MaxxAudio Folder
-MaxxService Folder
Files:
/system/lib
-libMA3-wavesfx-Coretex_A9.so
/system/lib/soundfx
-libmaxxeffect-cembedded.so
4: Use root explorer to copy system to /system
5: Reboot
6: If ViPER4Android FX or XHiFi Breaks (Check Via Driver Status) Continue
7: Move the etc folder found via /system/vendor/ to a secure location
8: Reboot Check V4A FX & XHiFi Status
9: Replace etc folder from the secure location back to /system/vendor
Still Not Fixed?
-Take the /system/vendor/etc/audio_effects.conf
-Verify with text viewer that Maxx FX libs are in it
-Move the file to system/etc
-Completely remove the etc folder from /system/vendor
10: Done!
Click to expand...
Click to collapse
Looking good!!! Thank you so much for putting all this effort into this. Especially loving all the audio tweaks! Sorry for the late reply, I've been super busy.
Also just got a Galaxy Tab s2 2016 with oem unlock capability (yay).
About Xposed. Xposed for lollipop safemode was disabled due to knox incompatibility, leading to hard issues if you got an Xposed module bootloop. I created a way to fix this. If you want, it could be a nice feature for users I think
BBRecon said:
Looking good!!! Thank you so much for putting all this effort into this. Especially loving all the audio tweaks! Sorry for the late reply, I've been super busy.
Also just got a Galaxy Tab s2 2016 with oem unlock capability (yay).
About Xposed. Xposed for lollipop safemode was disabled due to know incompatibility, leading to hard issues if you got an Xposed module bootloop. I created a way to fix this. If you want, it could be a nice feature for users I think
Click to expand...
Click to collapse
Awesome! I will look into this. Also if you get v4a errors be sure to check the change log in the OP to fix it. Furthermore now that the ROM is as final as I can get it I'll be releasing better presets for all audio apps starting with v4a. One last thing let me know if your Galaxy tab has a qcom processor I'd love to help you get an audio engine on it. If it has an Exynos processor I'd really love to test, I've never had that processor so I don't yet know if it is fully capable with all the audio stuff
CIGBURN said:
Awesome! I will look into this. Also if you get v4a errors be sure to check the change log in the OP to fix it. Furthermore now that the ROM is as final as I can get it I'll be releasing better presets for all audio apps starting with v4a. One last thing let me know if your Galaxy tab has a qcom processor I'd love to help you get an audio engine on it. If it has an Exynos processor I'd really love to test, I've never had that processor so I don't yet know if it is fully capable with all the audio stuff
Click to expand...
Click to collapse
I'm on the qcom 652 model, but I decided not to alter the system because I don't want to void my warranty. Someday I'd totally install some cool things like magisk... Is a shame I can't do that without voiding my warranty :/
Possibly a dumb question, but will this work on the MDL bootloader using loki doki?
StoneyJSG said:
Possibly a dumb question, but will this work on the MDL bootloader using loki doki?
Click to expand...
Click to collapse
I have no idea but I would advise against installing this. I made it for locked devices only. If you have full twrp with the capability of installing cyanogenmod etc... Then pick your favorite rom install it then come back here and give me the details so I can get a port of SoundAlive on it and all the other 7 audio apps as well! If you have the time I would love to have you test a port I have been meaning to test, but I dont have a snapdragon chipset with custom rom capability just yet. Also dont install the Galaxy S5's version of SoundAlive. I tried to port it a few days ago. I got the S5's version to process the audio but it doesnt work with all the other apps like the version installed to the Galaxy S4, furthermore I found that with the Galaxy S4 none of the configured libs in the audio_effects.conf file are required to get SoundAlive to process the audio unlike the version on the Galaxy S5. But I'm looking forward to helping you out, so let me know and dont install this rom it may break loki capability.
StoneyJSG said:
Possibly a dumb question, but will this work on the MDL bootloader using loki doki?
Click to expand...
Click to collapse
Turns out there are multiple courses you can go. You can install this but Do Not Flash OK2 Bootloader. But if I had loki I would install marshmallow and then install my latest audio engine for marshmallow found here -> https://forum.xda-developers.com/showthread.php?t=3655177
CIGBURN said:
Turns out there are multiple courses you can go. You can install this but Do Not Flash OK2 Bootloader. But if I had loki I would install marshmallow and then install my latest audio engine for marshmallow found here -> https://forum.xda-developers.com/showthread.php?t=3655177
Click to expand...
Click to collapse
Awesome, I would like to try it but don't want to lose my Loki capabilities so I won't flash the bootloader. Since I like touch wiz, right now I am running golden eye rom 5.0 lollipop with imperium kernel. I don't have TWRP, but I do have CWM recovery by shabby penguin installed. I know it's old, but still works good.
StoneyJSG said:
Awesome, I would like to try it but don't want to lose my Loki capabilities so I won't flash the bootloader. Since I like touch wiz, right now I am running golden eye rom 5.0 lollipop with imperium kernel. I don't have TWRP, but I do have CWM recovery by shabby penguin installed. I know it's old, but still works good.
Click to expand...
Click to collapse
I heard that flashing anything in Odin breaks Loki!
Honestly I still wouldn't flash this. I would hate for you to lose Loki. Go to my Galaxy S4 HEX FX thread if that's what you interested in. Then flash that on your current ROM. Make sure no other audio mods are installed.
Thread located here -> https://forum.xda-developers.com/showthread.php?t=3655177
StoneyJSG said:
Awesome, I would like to try it but don't want to lose my Loki capabilities so I won't flash the bootloader. Since I like touch wiz, right now I am running golden eye rom 5.0 lollipop with imperium kernel. I don't have TWRP, but I do have CWM recovery by shabby penguin installed. I know it's old, but still works good.
Click to expand...
Click to collapse
If you still want to try, you will need TWRP to restore system then instead of using Odin to flash install a custom Loki kernel instead. Don't flash the ROM zip that will definitely break Loki and don't Odin anything. If it does boot the custom kernel then go back to what you had and flash the audio engine
Related
(UPDATE 02/11/15)Version EMUmIZEROCompleta......full EMUI3 Experience!
For a SUPERLEGGERA (superlight) version of it check this thread: EMUmIZERO SUPERLEGGERA
******************************************************************************************************
INSTALLATION using ROOTJOY:
For the ones who prefer to flash the rom with ROOTJOY:
1: Download the Rom zip and replace " updater-script" inside folder "META-INF\com\google\android" with this one(unzip it before)
...now flash it by selecting the new created zip in rootjoy....that's all my friends...
******************************************************************************************************
INSTALLATION using CUSTOM RECOVERY (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-------------------IMPORTANT STEP----------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
THIS STEP IS VERY IMPORTANT BECAUSE MY TWRP MAKE A BACKUP OF VITAL PARTITIONS WHERE IS STORED IMEI,MAC ETC...
it's a good idea to copy the backup folder on your PC, it could be very useful in future in case of problem with missing IMEI and other trouble...
-------------------IMPORTANT STEP----------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (Without exit from recovery) Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on EMUmI!
******************************************************************************************************
IMPORTANT:
ALWAYS CHECK SERVICE PACKS THREAD and flash the latest one(if present)!
Before asking ALWAYS check TIPS SECTION,probably you will find (probably)a solution.
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS
Screenshots
Some Screenshots:
Service pack
Service pack:
Not needed in Rom UPDATE 02/11/15
ADDONS:
ADDONS:
Here you will find "MODULES" to install and obtain new functions:
For those having troubles with 3G data connection (check the frequencies supported by your mobile operator)(flashable in recovery without wipe):
BASEBANDS(Modem):
900 Mhz Baseband:
800/850/900 Mhz Baseband:
-------------------------------------------------------------------------------------------------------------------------------
EngineeringMode (Extract folder and install like normal apps)
MaxxAudioFx:
http://forum.xda-developers.com/android/general/maxx-audio-effects-mediatek-edition-t3044224
Am3D Zirene Audio Fx:
http://forum.xda-developers.com/android/development/sound-mod-am3d-zirene-audio-fx-t3152714
New Fonts:
http://forum.xda-developers.com/showthread.php?t=3032517
KERNELS:
(1.7Ghz)EMUmI_021105_DefaultKernel.zip (Default one included in rom zip,stablest and battery friendly)
(2.0Ghz)EMUmI_021105_Kernel.zip (Fastest but not underclockable)
All Kernels are flashable in RECOVERY.
CHANGELOG
CHANGELOG:
Installation script modifyed according with new (fixed) recovery....now both are "how they should be!".
Totally rebuild from newest Huawei firmware 268 Version.
Plenty of Optimizations and security Patches,included Stagefright bug
New Music app with Equalizer and full working songs dowload
New Baseband from stock Huawei firmware (better??)
Improved Camera
Improved GPS(agps enabled and editable in location setting).
Improved&Fixed all Sensors(now we have a full working compass!).
Added Compass app.
Re-edited new kernel with fix and optimizations.
Improved stability.
Full DTS Sound included!.
Huawei ID & related apps removed (not need to register to download themes).
Patched Service.jar(you can install engineering apps!..you can find them in ADDONS thread),many tnx to eryen :good:
Adopted some Folder&Files (from Huawei firmware)to menage various startup configurations(power policy,icons,toggles default home screen etc..).
Added "Motion control" in settings.
...probably some other things i don't remember..
Full working in every single function(exept the one mentioned in bugs thread)
.......FULL HUAWEI EMUI EXPERIENCE TRANSPLANTED TO UMI ZERO!.
NEW SECTION ADDED: "ADDONS":Her you will find "MODULES" to install and obtain new functions.
P.S.: Superleggera(Superlight) Version will be uploaded ASAP!
BUGS&TIPS
BUGS:
....probably you will find "G750-T20" or "Huawei" in some places:this is needed for the firmware to working(many libs and function refering to those names)
........
TIPS:
NVRAM WARNING: ERR 0x10 (& random WLAN MAC ADDRESS) ???....HERE THE DEFINITIVE SOLUTION
To download Themes and Songs remember to have simcard inserted and not to be in "Flight Mode":Those apps need to access your IMEI number to finalize autentication..
EMUmI is PREROOTED but there isn't the Supersu apk,all apps needing root will work well,i suggest to install SuperSu(from market) only if you need to manage apps permissions..
The rom is FULLY ODEXED (more stable&fast)....so is not reccomended using Titanium or similar app to remove and then restore apps:It will remove the related libs from system but it will not restore them...so i suggest to use it only if you know what you are doing..(to reinstall an app you need to extract the libs from his .apk and copy them to system/lib again.....)..however you can restore "Only data" of apps without problems.
Many Google related apps are not present(tts,search...)first of all to gain space,second because they are often updated....if you need them you can download from Market without problem..
How To Enable On Screen Soft Buttons:modify this line in build.prop:
#qemu.hw.mainkeys=0
TO
qemu.hw.mainkeys=0
(remember to left an empty line at the end of build.prop!)
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Downloading, gonna test.
I hope huawei and lenovo will bring us more stable firmwares.
Thanks for porting.
Thank you very much for your job!
arna1958 said:
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can:mine is a modded version of it.....
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
River825 said:
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
Click to expand...
Click to collapse
Can you share some pros/cons compared with stock 3.05?
Hi
Rom is multilingual?
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
alvin2014 said:
Hi
Rom is multilingual?
Click to expand...
Click to collapse
Yes it is MultiLanguage...
mightystorm said:
Can you share some pros/cons compared with stock 3.05?
Click to expand...
Click to collapse
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
River825 said:
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
Click to expand...
Click to collapse
Did have you try enabling DTS sound?
kovalski1 said:
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
Click to expand...
Click to collapse
I am also interested in the "double tap to wake" or so called "knock code".
JankyLV said:
I am also interested in the "double tap to wake" or so called "knock code".
Click to expand...
Click to collapse
I think it could be inplemented(lib files are included in system)i'll try....
Good work to continue. Congratulations. You ported the rom from which Huawei model. Thanks.
Sent from my HUAWEI MT7-TL10 using Tapatalk
[Guide] Multi Boot Note 3 (Updated 24/07/2015)
*** Hi Guys i no longer have a note 3 so i cant do any testing but our team member is here to give support for you all and even im here to give support except testing. please contact @[email protected] and @djnim for support.***
I am using this on SM-N9005 Snapdragon Variant of the Note 3; I believe this will work with other Note 3 Variants as well. Few of them are already tested and you can find them below. Others who have different variants which are not tested can try this and update us, and we will be here to help you out if you are ready to try this out.
@chenxiaolong is the one who made this happen to our beloved Note 3
Main advantage of this is you can try any new rom with out loosing or having any kind of trouble with your existing rom. This mod will not change anything in your primary rom, so any time you can go back to your normal state.
Disclaimer
1.I am not responsible for bricked devices, dead SD cards,etc.
2.Before going further! YOU are choosing to make these modifications.
supported Devices: ( Tested and confirmed working)
SM-N9005 (International Qualcomm): hlte (Tested by me )
SM-N900T (T-Mobile US): hltetmo (Tested by @MistaEast ) confirmation post
SM-N900R4 (US Cellular): hlteusc (Tested by @harshal10398 ) confirmation post
SM-N900 (International Exynos): ha3g (Tested by @mohnishkat ) confirmation post
SM-N900P (Sprint): hltespr (Tested by @lord dredd ) confirmation post
SM-N900K(Korean): (Tested by @Premananda_laishram) confirmation post
Requirements
* Read the full guide before Starting.
* Backup your phone if you are doing this first time. (Full Nandroid backup recommended for the new comers and it’s also recommended to others who don’t know what they are doing exactly even if they have multi booted several times)
* Rooted Note 3 with custom recovery (preferred TWRP or philz).
* free space in your internal SD (for example a Cm based roms take up to 2.5GB to 3.5GB and a TW roms take up to 5GB or more.)
* If you face any trouble please read the FAQ before doing something or asking for help. And if you want help please provide as much as details(device, roms, etc.) you can.
*
Instruction:
1.Download your desired Rom which you want to use for multi booting and the mods, addons, gapps, Kernel etc for the same. Keep the files in your internal memory.
2. Download the most recent snapshot release of Dual Boot Patcher and install it on your Note 3.
3. Open Dual Boot Patcher and grant SU permission. Then go to ROMS and you will see your Primary rom, press the 3dotmenu key and click "set kernel". If it fail to set kernal please read the FAQ.
4. Then In Dual Boot Patcher go to Patch Zip File and Choose hlte for snapdragon variant and ha3g for Exynos veriant (Samsung Galaxy Note 3) from the drop down menu.
5. In the second drop down menu select "Data Slot".
6. Below that you have to enter the ID of the secondary rom.(Example 1, 2, 3, etc. - it will take it as /data/multiboot/data-slot-1)
7.Now tap on the below button to choose the ROM's, Gapps, Kernel and mods to patch them and make them perfect for Multi booting.
8. Always remember to keep same slot ID for the Gapps, kernels and mods same as the rom. (Example: if you want to flash the gapps/kernel to the data-slot-1 rom then you have to select the same ID that’s 1 or if you want to flash the gapps/kernel to the data-slot-2 rom then you have to select the same ID that’s 2.)
9. When selecting the files except cm rom zip there will be a “preset” drop down menu, from that you have to select according to the file you are going to patch. (Examp: for roms, kernels, mods, addons – custom; for gapps – Google_Apps; for Su zip – other/SuperSu; For xposed-Other/Xposed)
10. Now press the tap to begin patching button to patch the file. And you will get a new patched zip file in the same location.
11. Now Boot into custom recovery and flash the new patched file and reboot.
12. And your device will boot into New Rom.
13.Install the Dual Boot Patcher app and set the kernel for your second ROM as well.
14. To switch between roms
•Open Dual Boot Patcher app/roms and click on primary or secondary rom as you like and reboot.
•Or Use Swap Roms to switch between Roms.
* Important things to keep in mind: while installing a rom or mod with Aroma installer don't reboot directly from the aroma.
You have to always uncheck the last option to reboot in aroma and click finish. So it can finish the final steps for multi booting.
And if you miss that it will only reboot to recovery. To boot back you have to flash your primary rom kernel or re-flash the patched rom.
Never update a secondary rom through OTA Update.
*. For other devices:
1. You have to download and install X-plore File Manager (which I am using) from play store.
2. Open X-plore File Manager from app drawer and navigate to the patched zip file and open it.
3. Now you will see a folder named multiboot inside that you will find info.prop, now open info.prop with the text editor which comes with the x-plore file manager.
• And then find and change mbtool.installer.ignore-codename=false to mbtool.installer.ignore-codename=true
Revert
To revert back or if you face any problem just flash my Multi Boot cleaner.zip which will wipe all the installation files from \system and restore the primary rom kernel.
As a backup keep a copy of your kernel flashable zip file.
FAQ
1. I can't set the primary rom kernel in xyz rom. And I can’t switch to other rom in primary rom.
Ans. Just download the set kernel fix as per your model and flash it in the recovery.
The above fix only work for primary rom. If you have trouble with any other roms just add ro.patcher.device=hlte(for other models add your model instead of hlte) to the bottom of build.prop of that rom and you are good to go.
If you don’t know how to do that just pm me and I will make a flash able zip to add it to your secondary rom.
if the above didnt work Read this post please
2. App sharing?
Ans. Until now no luck. (Still under testing)
3. This rom can’t be patched.
Ans. some roms are not supported its known, if the Dev have time may be he will consider including them.
Also read this
Credits/ Thanks:
@chenxiaolong
Original Thread: http://forum.xda-developers.com/showpost.php?p=45659284
Don't forget to thank him and if you can please consider a small donation for him because he really deserve it.
@aukhan & Team Emotroid
His Thread (Where I got the idea and help to make this guide): http://forum.xda-developers.com/note-4/general/dual-boot-n910f-snap-dragon-variant-t3065211
@rlorange for the help and support.
His thread for Dual boot backup and restore app. http://forum.xda-developers.com/showthread.php?t=2491299, http://forum.xda-developers.com/not...-4-15-multi-boot-backup-restore-v1-0-t3087187
@AholicCert for helping me with some scripts
@ other XDAmembers
Video Guide
https://www.youtube.com/watch?v=upeSC65t5XQ
Going to try it mate tnx
a_prabhu7 said:
Going to try it mate tnx
Click to expand...
Click to collapse
Welcome try it and let us know.
Sent from my SM-N9005 using XDA Free mobile app
Has anyone tried this out on N900????
thetitanium said:
Has anyone tried this out on N900????
Click to expand...
Click to collapse
Try it your self and let us know. i will promise you that it will not touch your primary rom. Any time you can go back to normal.
54NJ41 said:
Try it your self and let us know. i will promise you that it will not touch your primary rom. Any time you can go back to normal.
Click to expand...
Click to collapse
tried on my 4.4.4 vn rom-set kernel-failed to set kernel..
vagenrider said:
tried on my 4.4.4 vn rom-set kernel-failed to set kernel..
Click to expand...
Click to collapse
1. First of all have you grant super user permission for Dual Boot Patcher. If not just reboot and try again.
2. Do you have enough space in your sdcard (internal) for the backup of the kernel.
3. Just check if there is sdcard/multiboot/primary/boot.img is their.
4. Try the 8.0.0.r1119.g9c51715 version of dual boot patcher if the above didn’t help.
54NJ41 said:
1. First of all have you grant super user permission for Dual Boot Patcher. If not just reboot and try again.
2. Do you have enough space in your sdcard (internal) for the backup of the kernel.
3. Just check if there is sdcard/multiboot/primary/boot.img is their.
4. Try the 8.0.0.r1119.g9c51715 version of dual boot patcher if the above didn’t help.
Click to expand...
Click to collapse
tried all mate but nothing..
vagenrider said:
tried all mate but nothing..
Click to expand...
Click to collapse
Hi bro can you please send me the link to the rom which you are using. I will try and let you know.
54NJ41 said:
Hi bro can you please send me the link to the rom which you are using. I will try and let you know.
Click to expand...
Click to collapse
here you go http://samsungviet.vn/threads/note-3-snapdragon-vn-team-vn-rom-v7-0-online.1034/
apreciate very much your time-effort etc thank you
vagenrider said:
here you go http://samsungviet.vn/threads/note-3-snapdragon-vn-team-vn-rom-v7-0-online.1034/
apreciate very much your time-effort etc thank you
Click to expand...
Click to collapse
Which version 7.2 or other
54NJ41 said:
Which version 7.2 or other
Click to expand...
Click to collapse
7.2
Here we go! I have complete dual Boot on my Note 3! It's awesome! My first Rom is Aryamod 5.3 and my Second Rom is temasek unoffical cm rom! Thanks to the Developers for your great Roms! And now Thanks to you 54NJ41! Your tutorial is great! I wait over 1 year for dual Boot on my Note 3 and now I have it!
does anyone knows how i could get more system partition space?
I tried to use titanium backup to move some apps but it says my system is 2.38gb full
Rogers Note 3
Anyone can tell me if I can install it for the Canadian Rogers Galaxy Note 3 ?
Thank you
you said:
Download and keep your desired (Secondary Rom) CM or AOSP rom + Gapps zip files
the second must be CM or AOSP?
what about if i want to use Arya and Omega roms for example?
vagenrider said:
7.2
Click to expand...
Click to collapse
I have tried the rom but same result as yours. But don’t worry I have an alternative way to set the kernel for your primary rom.
First make folders in your SDCard, “MultiBoot” in it “Primary” it should be like: Sdcard/MultiBoot/Primary
Then extract the boot.img from your rom zip and copy it to Sdcard/MultiBoot/Primary
So the result will be Sdcard/MultiBoot/Primary/boot.img
It’s done.
NightForce said:
Here we go! I have complete dual Boot on my Note 3! It's awesome! My first Rom is Aryamod 5.3 and my Second Rom is temasek unoffical cm rom! Thanks to the Developers for your great Roms! And now Thanks to you 54NJ41! Your tutorial is great! I wait over 1 year for dual Boot on my Note 3 and now I have it!
Click to expand...
Click to collapse
Welcome bro
dream_catcher79 said:
does anyone knows how i could get more system partition space?
I tried to use titanium backup to move some apps but it says my system is 2.38gb full
Click to expand...
Click to collapse
To make space in your system partition.
1. Delete what ever apps you are not using from system/app and syatem/priv-app (Don’t delete if you don’t know what it is or what your are doing.)
Example: shealth, etc.
2. Move some google apps from /system/app to /data/app to make them user app using root explorer.
Example: maps, gmail, chrome, etc.
thermax04 said:
you said:
Download and keep your desired (Secondary Rom) CM or AOSP rom + Gapps zip files
the second must be CM or AOSP?
what about if i want to use Arya and Omega roms for example?
Click to expand...
Click to collapse
To dual boot two TW roms is very hard. Because there is not enough space to fit both system file in your system partition. Other wise you have to deboalt the primary rom and you have to deboalt secondary rom zip before flashing. And by doing so you will lose most of the features of your TW roms.
And if you want to use CM as primary and TW rom as secondary its possible but not recommended. Because you will have trouble with flashing mods etc for your TW rom.
The better option at the moment is to keep the TW rom as Primary and others a secondary.
With Sunshine unlocking droid Turbo Bootloader I will be moving on to making ROM's not just an img. please see my Forum on XDA here and my Website Computerfreek.com Here for more info.
I will continue to do MOFO support for the next month or so as users make the switch.
Computerfreek274_Turbo_lollipop (SU4TL-44)
Also On my website Computerfreek.com Now has updated help and support how to setup stuff like adaway,Boot anamation, Dpi and more. Also I will be posting Pre-Released images there days be for there on XDA. There will also be images some custom images that will not ever be listed on here on XDA for I will not support them. So please check out the site it is still a work in progress but it is getting there. As of right now I did not get custom IMG listed and the newest ver is still 1.6 and it is listed below.
This Firmware upgrade to 5.1 SU4TL-44 from 4.4.4! VIA Mofo.
If you took the OTA 5.1 update you out of luck as you where told not to on here over and over. Go check out sunshine root maybe coming soon for locked 5.1 users.
If this software somehow kills your phone I am not to be held liable.
PLEASE BACKUP YOUR DATA 1st For the best speed and no bugs if you are coming from 4.4.4 for the 1st time I recommend that you backup your photos,music and other data. and when you get to step 3 wipe Data and cache. It is not a must but for me to give you support this is a must.
Thanks to @firstEncounter for his great post and images. Thank you @mattlgroff for his help and everyone who sent me links to the OTA and Full ver.
Thanks to http://motofirmware.center/files/ for hosting stock lollipop IMG's so I an update missing or outdated system files I had.
Big Thanks for PON-3 Audio mod from @mrchezco1995 and his forum is here
Please support better battery stats and give a big thanks over on there forum here. The better battery stats companion app installed in 1.4 will only work with paid ver of bbs from google play.
Thank you guys so much.
Features:
Stable! - I don't publish images without exhaustively testing them. If you have any issues to report, reply to this post and either myself or the community will rally to help fix the issue.
Much better battery life! - This image focuses on battery savings without compromising performance. Your phone will last much longer while running this system image.
Multiple versions - Custom version from DPI dpi higher resolution to Custom fonts
Fast! - This image is lean, fast, and enhanced for performance.
No bloat! - All bloat that is available on the Play Store has been removed. Extra files (like help videos and help audio files) have also been removed.
Optional adblocking! - Adblocking via AdAway that can be toggled on and off.
Now with Pon-3 Audio/ V4A - Increase the volume and the quality of audio output from the Droid Turbo by enabling VIPER4Android which comes bundled in this system image.
Enabled for XPOSED Updated to newest ver. - This system image has been enabled for the XPOSED framework as well as includes BusyBox.
For better support I have removed old versions on here my focus is to have better support for all of you starting from 1.5+
Please Read! If your not on Kernel Version 3.10.40-perf-g90ddf4a Sept 1st 2015 Please Download and flash all .IMG files in this zip here. To find the kernel build go to settings > About phone. Most of you guys will need to update!
Computerfreek274_TurboPop_1.6 Update. 11/07/2015
Now With Turbo 2 Command Center. Screenshot
Download 1.6 Here
Change Log.
Updated .img files in 1..6 No need to download Img pack when upgrading from KK or to update your kernel,modem,etc... all files are updated 1.6 Zip.
Cleaned up some more junk from system
Updated some apps.
Removed music2 aka google music.
Samsung Sans Font IMg's has the IOS9 emojis.
Turbo 2 Command Center
Download 1.5B Here Updated 10/16/2015 Base on SU4TL-44
Download 1.5 Here 10/5/2015
Custom fonts in 1.4 I will update 1.5 as needed.1.4 Download Here.
All Files and IMG's files that are needed to install my IMG are Zipped with all my system images from ver 1.3 and up Just download 1.4 or 1.3 and unzip open the help file and do a step by step install.
Please Read 09/12/2015 For Android Pay support and Setup please see Post #3
You can still download 1.3 and 1.3A here.
[/URL].
1.5B Change Log 10/16/2015.
Updated to SU4TL-44
Updated Xposed
Boosted overall audio and mixer profile updated
Fix Pon-3 audio buffer for large audio high bit rate files buffer from 32m to 48m
Few other tweaks also see 1.5 for more info. This has all the tweaks from 1.5 and 1.5 is the best battery and fast running ver to date.
1.5 Change Log 10/5/2015
Removed more junk like maps and stuff as you have updated ones from market.
Added for more Tweaks for faster GPU and CPU and more memory.
In call VOL boosted default was max 3 now max 10.
Better GPS.
Battery Seems much better with memory fixes.
1.4 Change Log 6/12/2015
Android Pay Support Please see post #3 For more info.
Custom Fonts There will be 1.4 img with custom fonts. More to come check one of the last post for more info.
Some Of the changes listed here is from 1.3A
PowerSave Is in all from 1.3A and up.
Removed some more bloat.
SuperSU is the stable ver.
Xposed to newest ver Please uninstall your old xposed.apk be for you flash.
HDR Camera setting is fixed as of 1.3A
Updated some system files.
Tweaked GPS a bit for faster lock.
PON-3 updated
Fixed audio profiles for PON-3 to match are turbo for a more stable PON-3 audio.
Updated Mixer Profiles for better audio.
mixer_paths updated louder audio as we had in my ver of KK. 09/02/2015 I had to make a new one for Lollipop as the old mods did not work.
updated to work better with the turbo Pon-3.
There is now a set of 1.4 Pure/MAX IMG's also for none Verizon users only.
More help and support can be found on my website at Computerfreek.com for full install and updates Or read below.
How to install
See Post number 2. http://forum.xda-developers.com/showpost.php?p=61636340&postcount=2.
To setup DPI,Adaway and more.
To install system img via mofo see post 2.
Setup Adaway Install AdAway from Play Store. Run AdAway (don't download hosts files yet) and go to settings - preferences. Check 'allow redirections' and under 'target hosts file' select '/data/host Then go back and hit update host files.
Xposed In Pre-installed and setup just install the mods you like to use.
On Pon-3 V4A Open Pon 3 and check the sound devices you like to enable.
Setting up an custom boot animation place bootanimation.zip under /data/local/moodle/bootanimation.zip for more info or watch this small video on how to. https://www.dropbox.com/s/lom6zduant...rding.mp4?dl=0
For 493 Builds to fix the ambient display being off set you must install xposed MOD app settings found here or download it from inside of xposed. and set moto diplay to 640 DPI. If you need more help check the forums here.
Flashing from KitKat to Lollipop
This is a nice well written guide by @Purpeltendire Thank you @Purpeltendire Thank you for this great guide.
If you are new or upgrading and need more help I updated help and info on my website also at computerfreek.com
Steps to flash from KitKat to Lollipop - This assumes that you're currently using a rooted KitKat image already, and have used mofo to get root.
BACK UP ANY DATA YOU DO NOT WISH TO LOSE.
YOU ARE ULTIMATELY RESPONSIBLE FOR ANY LOST FILES OR DEVICE PROBLEMS.
Make sure you have a good hour or two set aside, at the minimum. It’s probably not a great idea to try this right before work or class.
Install mofo, ADB, and fastboot on your computer if you haven't already. On Windows, I like using this for ADB/fastboot.
Download the image of your choice.
Download 5.1_images.zip. Extract the files, and put them into the same directory as fastboot. Next, boot into your phone's bootloader (turn the phone on by holding power and volume down), and flash each file seperately using fastboot:[/FONT]
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot erase ddr
Now open mofo_gui.bat, and flash the system image you downloaded:
Code:
mofo flash Your_imagename_here.img
Once that finishes, you want to try to boot the phone. Select Boot to System from the bootloader and then go grab a snack - chances are, it will sit at the Motorola boot screen for some time. After about five minutes, press and hold power to turn the phone off.
Next, boot into the bootloader again and select Recovery. You will likely get a "Dead Android" screen with "No Command." To bypass this, hold power and tap volume up (if that method does not work after a few tries, hold volume up and press power).
Now that you're in recovery, you're wiping both data (factory reset) and cache. Wipe cache first - this may take a very long time (20-30 minutes), especially if you've never done it before. Wipe data/factory reset second. If you're feeling paranoid, wipe everything again.
From recovery, boot to the bootloader. From bootloader, boot to system. This first boot might take some time as well.
Assuming all went well, you should see a Lollipop setup screen within 10-15 minutes. Congratulations!
Remember that your device is now in “like new and improved” mode. You’ll need to restore your apps and settings from wherever you backed them up to, and you'll still need to get the APKs for Xposed and AdAway. Again, nobody else is responsible for any of your lost data.
[FONT=Arial[/FONT]
For more help see Computerfreek.com
Android Pay Setup and Support. 9/28/2015
Update The updated android pay from google market is no longer working with root so if you flash back to an rooted img after setting up this one android pay will stop working.
9/30/2015
For Working android play and info please go to this forum I have made an IMG with tweaks and more here with working android pay.
Tomsgt said:
just talked with the dev behind moforoot and he said that mofo was patched in android 5.1 but he may look into other ways to get around it.
Click to expand...
Click to collapse
This was stated in another thread. I don't know if you heard, but I'm holding on that there's still hope. Is there still a possibility to be able to make a rooted image? I'm really hoping that we'll be able to have root with lollipop, but at the same time, I don't want you to put in all this time and effort for nothing.
Sent from my XT1254 using XDA Free mobile app
There's a lot of places with the ota, try one of them
Jaocagomez said:
There's a lot of places with the ota, try one of them
Click to expand...
Click to collapse
he needs the firmware img's
Michaelmansour1997 said:
he needs the firmware img's
Click to expand...
Click to collapse
Those will be released in the following days
Jaocagomez said:
Those will be released in the following days
Click to expand...
Click to collapse
noooo i need them today to fix my paperweight
Ahhhhh! I can barely wait!
Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /
MoPhoMike said:
Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /
Click to expand...
Click to collapse
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
Yes but I like to get ahold of a system dump. I been working on the ota today.
Pretty stoked!
Sent from my XT1254 using Tapatalk
siegesoldier said:
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.
Click to expand...
Click to collapse
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.
Want to make sure so if you have root via MOFRO then you should wait and not install the OTA and wait for new System Image from the Freek!!!
computerfreek274 said:
Yes but I like to get ahold of a system dump. I been working on the ota today.
Click to expand...
Click to collapse
Gotcha. Well unless someone has had luck with Kingroot (early reports said that it didn't work), I don't think that will be possible.
EDIT: Nevermind. It's totally possible. I'll try to track down someone who can get it to you.
computerfreek274 said:
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.
Click to expand...
Click to collapse
Pulling /system with adb should be easy and noob-proof.
Sent from my LG-E400 using XDA Free mobile app
TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
there are no system img's in the ota, its a flashable zip not an xml
Is this what we're looking for?
http://forum.xda-developers.com/droid-turbo/general/lollipop-5-1-coming-23-11-38-t3146663/page4
I have the restore firmware ... where should I host it?
VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-turbo/general/droid-turbo-lolipop-firmware-t3147979
Here is a complete guide on how to get V4A stock and V4A Sony Beats Edition working on your Samsung Galaxy S7 Device. Please note I have tested this personally on my own S7 Edge SM-G935F and it is working 100%. There was a few bumps along the way to get everything working and if it wasn’t for @guitardedhero help and everyone else involved I wouldn’t have figured it out. There were similar tutorials HERE and HERE that offered some insight but didn' provide a fully working procedure so I put together my own guide that will work for sure.
You will need a rooted device for this to work (SuperSU by @Chainfire CF-AUTO-ROOT) and a working recovery TWRP version 3.0.0 or above found HERE
As usual please backup all your data and files (internal and external SD cards) as mistakes can be made and things don’t always go as planned
0. In your SuperSU app go to setting and deselect/un-tick “Mount namespace separation” (this is causing issues with the installation process on this and other devices)
1. Install BusyBox by Stephen (Stericson) with the default settings of /su/xbin
2. Install the latest version of Viper4Android (currently 2.4.0.1) from the official website - LINK or if you prefer use the older version as it has been favored for providing better quality. (Do not open just yet, only install)
2.3.4.0 with its Super Quality driver is absolutely superior to 2.4.0.1 and its driver in every aspect, it's almost not even fair. I promise you, this build will absolutely blow your mind, especially when used with the ViPER|Audio™ Audiophile™ 4.0 Profile @guitardedhero
3. Make sure Viper4Android has write permissions (this should be on as default but check just in case) Settings -> Applications -> Application manager -> V4A -> Permissions -> and make sure all available options are enabled.
4. Freeze the stock Sound Alive or Adapt Sound app using Titanium Backup.
5. Open up Root Explorer (or your preferred root browser) and change the system to MOUNT R/W
6. Go to root/system/etc/ and rename the file audio_effect.conf to audio_effect.conf.backup
7. Download the modified audio_effect.conf from HERE and copy it to /system/etc/ and /vendor/etc/
(This last location will have no files, it may be skipped?)
8. Set permissions of the new files to rw-r-r (0644) (important! Or you may have boot loops)
9. Change your system back to MOUNT R/O and exit.
8. Restart your device in recovery and flash THIS FILE HERE and reboot (I didn’t perform any wipes)
9. Once your device reboots, open up V4A and grant root permissions and install the requested drivers.
10. Reboot once again and this should be it…
You should now have V4A working on your device
If you feel the stock V4A isn’t giving you the correct audio niche or experience then consider changing to ViPER|Atmos™ 4.8.1 Sony™ Beats™ Edition by @guitardedhero – (I have not tested other editions found here on the OP Thread, they may or may not work… any volunteers ??? )
FLASH THIS FILE TO GET STARTED ViPERAtmos 4.8.1 Sony Beats Driverless.zip
Once your phone reboot you will have a new looking V4A icon and upon opening it should work but your Dolby Atmos app will keep crashing until you FLASH THIS FILE dap_r6.5.zip - Fresh Dolby Atmos App file.
And here is a quick guide written by @guitardedhero to enable the Audiophile profiles...
I don't recommend others to flash without an acceptable backup to restore as this build drops compatibility big time for some devices resulting in no in-call volume for example. It is the custom version I built for my Nexus 6 ViPER|Atmos™ Audiophile™ rom and is just absolutely incredible!
Post-install instructions:
In v4a:
Menu > Show Notification (disable through notification shade if you wish)
Menu > Ui Setting > Expert
Menu > Save Effect Profile > As New Effect > Stock
Download and extract ViPERAudio Audiophile Profile 4.0 zip from the OP attachments section or HERE.
Search in:
/data/media/legacy/ViPER4Android/Profile
and
/storage/emulated/0/ViPER4Android/Profile
until you find the Stock folder you just saved earlier.
Take note that this is your working v4a directory.
Copy the Kernel and Profile folders in the ViPERAudio Audiophile folder you extracted earlier and paste them into the /ViPER4Android folder of your working v4a directory. Compare the folder and file permissions to the Stock folder and files and set them to the same permissions if necessary.
In v4a:
Menu > Load Effect Profile > Audiophile 4.0
Recommended Dolby Atmos™ Settings:
Music tab highlighted at the top
Open or Flat EQ preset
All three effects at the bottom turned Off except for Dialogue Enhancer if it sounds good to you.
Troubleshooting and additional steps will be written here shortly...
Please find all needed and extra files bellow...
REVISED - ViPERAudio_audio_policy_S7_Edge.zip has been added...
First! :highfive:
I've got one more goodie, provide me your stock /system/etc/audio_policy.conf and I'll provide ViPER4Android processing like you guys have never seen! (heard)
Fantastic tutorial from which many will certainly benefit! @themoto
Great job! :good:
guitardedhero said:
First! :highfive:
I've got one more goodie, provide me your stock /system/etc/audio_policy.conf and I'll provide ViPER4Android processing like you guys have never seen! (heard) :good:
Click to expand...
Click to collapse
ill post it shortly, still fixing up this guide and correcting everything...
GODSPD said:
ill post it shortly, still fixing up this guide and correcting everything...
Click to expand...
Click to collapse
:good:
find it bellow
guitardedhero said:
:good:
Click to expand...
Click to collapse
Here is my original file from the the Galaxy S7 Edge SM-G935F found inside the .rar file
GODSPD said:
Here is my original file from the the Galaxy S7 Edge SM-G935F found inside the .rar file
Click to expand...
Click to collapse
audio_policy.conf
guitardedhero said:
audio_policy.conf
Click to expand...
Click to collapse
my mistake, here is the right file...
GODSPD said:
my mistake, here is the right file...
Click to expand...
Click to collapse
Here you go, friend!
Feel free to add this to your OP, a flashable audio_policy for you and your friends! :good:
Thanks! 2 questions..
1) what's the battery drain like compared to without v4a?
2) how do we fully revert back to stock and remove v4a?
Thanks for this guide, kinda got stuck at step 5 though, couldn't figure out how to mount r/w using es file explorer with root? When I tried to change the filename of audio_effects.conf it said task failed which is because I didn't mount r/w I assume
You made my day man
2.3.4.0 is way better than 2.3.4.1 by miles.
I have GS5 besides my 7 edge and the reason i kept it around is the sound quality, i always favored it to listen to music over my 7 edge and just figured out the reason; 2.3.4.0 is installed on my GS5.
GS5 -----> drewer
Sent from my SM-G935F using Tapatalk
GODSPD said:
ill post it shortly, still fixing up this guide and correcting everything...
Click to expand...
Click to collapse
Is there any difference between your thread and this one ?
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
I see you've linked the other 2 posts in your op. It may have been better to just include the additional information in that thread, only a suggestion
sawdoctor said:
Is there any difference between your thread and this one ?
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
I see you've linked the other 2 posts in your op. It may have been better to just include the additional information in that thread, only a suggestion
Click to expand...
Click to collapse
the op had added some profile and kernel for v4a. and also dolby atoms
relax24 said:
Thanks! 2 questions..
1) what's the battery drain like compared to without v4a?
2) how do we fully revert back to stock and remove v4a?
Click to expand...
Click to collapse
1) Battery drain - I haven't noticed any significant changes on my device
2) If you install the apk just uninstall it and unfreeze your Sound Alive
3) and undo any changes
sawdoctor said:
Is there any difference between your thread and this one ?
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
I see you've linked the other 2 posts in your op. It may have been better to just include the additional information in that thread, only a suggestion
Click to expand...
Click to collapse
The first guide didn't provide a fully working method, try it and it will keep asking you to reinstall drivers, the second was designed for the S6 and provided a different method, here it is covered 101% plus additional sound mods, profiles, Atmos, and much more.
GODSPD said:
The first guide didn't provide a fully working method, try it and it will keep asking you to reinstall drivers, the second was designed for the S6 and provided a different method, here it is covered 101% plus additional sound mods, profiles, Atmos, and much more.
Click to expand...
Click to collapse
No problem thank you for your reply??
Sent from my SM-N920C using Tapatalk
hookguy said:
Thanks for this guide, kinda got stuck at step 5 though, couldn't figure out how to mount r/w using es file explorer with root? When I tried to change the filename of audio_effects.conf it said task failed which is because I didn't mount r/w I assume
Click to expand...
Click to collapse
just try it with root explorer app from the store, the second you open it it has that option displayed in the top right hand corner, you cant miss it...
Any reason why the audio sounds high pitched/faster after installation?
El Maestro said:
You made my day man
2.3.4.0 is way better than 2.3.4.1 by miles.
I have GS5 besides my 7 edge and the reason i kept it around is the sound quality, i always favored it to listen to music over my 7 edge and just figured out the reason; 2.3.4.0 is installed on my GS5.
GS5 -----> drewer
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
How did you install 2.3.4.0?
When I download the zip I can't flash it, and It is not possible to install the apk's inside it either
Team DevDigitel Presents:
Stock With Goodies =)
This is a stock based rom based on the QI5, QK3, QL9, RA6, and It is Pre-rooted with SuperSu, Heavy Debloat and some slight adds, this is just the basic start, Moded boot animations and removal of all carrier info that is not sprint, so non sprint users... well sorry, this is the sprint side of things.. if you want to flash this and you are non sprint, go ahead and do so, then after phone has fully booted one time, put phone in download mode and flash your carriers csc, please do not request support in this thread for porting to other carriers.
WHAT YOU NEED:
You must have already Rooted your device with SamFail, You also will need FlashFire and Busy-Box installed and some common sense!
FlashFire : https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
(OR)
SAFE STRAP TWRP: https://forum.xda-developers.com/ga...covery-locked-nougat-7-1-1-safestrap-t3772765
Busy-Box: https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer&hl=en
Okay here lets get started, and oh wait..
And as always, I can not be held liable for the damage or malfunction of your device using these files, you proceed at your own risk and remove my liability by continuing to the downloads portion of this post!
STEPS:
Step 1: Insure Busybox is installed into system directly. I prefer /system/xbin
Step 2: Install FlashFire and grant it root permission
Step 3: Click the Little RED + button in the bottom right corner and choose Flash ZIP or OTA
Step 4: Navigate to where you have downloaded my rom and select it.
Step 5: Check the box next to ( Mount / System read / Write) then hit the check mark in top right corner
Step 5.5: If you are not already on my rom, you must choose WIPE and do a full wipe, this is deodexed and the old data needs removed, this also needs to be put at the top of the flash list to be done 1st just click and hold on the wipe and drag it to the top.
Select the following : Wipe System Data, 3rd Party apps, Dalvik Cache, Cache Parition.
Step 6: Hit the FLASH button at the bottom and hold on for the ride! If all goes well you should have installed TeamDevDigitel rooted stockish rom and enjoying yourself.
Step 7: Hit the thanks button at the bottom of the post and keep checking back here for updates!!! Photos attached to post to see how things should look on boot-up and during install using FlashFire.
Please Join The Telegram Group For Faster Communication!! Group ID: t.me/DevDigitel
Please See Changelog in Post #3 for more information about the ROM versions
DOWNLOADS BELOW:
U3/RA6 & Newer BOOTLOADER/FIRMWARE
Download Links:
U3_DevDigitel_BRB4_V1: Feb Sec Patch
Link 1: https://www.androidfilehost.com/?fid=890129502657595794
U3_DevDigitel_RA6_V1: Jan Sec Patch
Link 1: https://www.androidfilehost.com/?fid=890129502657583230
U2/QJB & Newer BOOTLOADER/FIRMWARE
Download Links:
U2_DevDigitel_QL9_V1: Dec Sec Patch
Link 1: https://www.androidfilehost.com/?fid=746010030569947345
U2_DevDigitel_QK3_V2: Nov Sec Patch
Link 1: https://www.androidfilehost.com/?fid=745849072291696990
U2_DevDigitel_QK3_V1: Nov Sec Patch
Link 1: https://www.androidfilehost.com/?fid=745849072291696564
U1/QI5 OR OLDER BOOTLOADER/FIRMWARE
Download Links:
U1_DevDigitel_QI5_V5: Oct Sec Patch
Link 1: https://www.androidfilehost.com/?fid=673791459329058731
U1_DevDigitel_QI5_V4: Oct Sec Patch
Link 1: https://www.androidfilehost.com/?fid=817906626617943327
U1_DevDigitel_QI5_V3: Oct Sec Patch
Link 1: https://www.androidfilehost.com/?fid=817906626617941853
U1_DevDigitel_QI5_V2: Oct Sec Patch
Link 1: https://www.androidfilehost.com/?fid=673791459329055952
Status : Stable
BUGS / KNOWN ISSUES:
*Pop-up While being plugged into pc saying device can not be used, this is normal just dismiss and use as normal.
*Certain Apps do not work due to being rooted; SamsungPay, SHealth, SecureFolder and others are effected by this.
some apps now working with tima=0
*If you get stuck in setup wizard, please click back and go forward again, if it still wont proceed just reboot phone and it will make it through the setup. This happens randomly for setups it seems.
If you are having audio issues : go to /system/etc/mixer_paths_tavil.xml and change to mixer_paths_tavil.xml.bak2 and take the mixer_paths_tavil.xml.bak and remove the .bak off of it. This essentially turns off the dual speaker mod, but shouldn't need to be done, some apps just may not like dual speaker mod?
Removed This pre-built in feature on BRB4 due to many apps not supporting dual audio this way.
Developer:
@Team DevDigitel
Contributor(s)
Special Thanks to These guys for getting ROOT!
- @partcyborg
- @me2151
- @elliwigy
Donations: Thank you guys for the support and donation, I hope you guys have enjoyed the work ive provided and continue to benefit from it. Please join telegram group if you guys have any issues or feel free to hit me up at [email protected]
@fiver5 (Gifted Ad Free)
@Mediocrates (Gifted Ad Free)
Team Dev Digitel Recommended & Tested Mods & App Links:
Boot Animations MOD:https://forum.xda-developers.com/sp...s/mod-boot-animations-root-flashfire-t3691310
3Minit Battery MOD: https://forum.xda-developers.com/sp...es/mod-3minit-battery-root-flashfire-t3694694
Surround Sound Mod: https://forum.xda-developers.com/galaxy-note-8/themes/note-8-soundmod-magisk-module-t3677719
SystemUI Tuner APP : https://forum.xda-developers.com/sp...app-systemui-tuner-root-root-options-t3688773
Weta-Mod APP : https://forum.xda-developers.com/tmobile-galaxy-note-8/themes/mod-weta-1-4-t3705882
FlashFire APP : https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
Safe-Strap APP: https://forum.xda-developers.com/ga...covery-locked-nougat-7-1-1-safestrap-t3772765
Busybox APP : https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer&hl=en
Shortcut Master APP : https://play.google.com/store/apps/details?id=org.vndnguyen.shortcutmaster.lite&hl=en
Rom ToolBox : https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox&hl=en
Viper4Android : https://forum.xda-developers.com/galaxy-note-8/themes/snapdragon-viper4android-t3685936
Changelog
Please pay attention to how files are labeled as this is to help insure you have chosen the correct firmware for your device. The U1 or U2 will be to determine if your device has been updated or not to the newer bootloader. This will forever lock your device to the newer revision bootloader U2 and you no longer can flash U1 roms or use their data from backups. Please insure you either update and flash U2 or if you are still on U1 and you bootloop and cant recover, restore using a u1 firmware or choose to flash the latest firmware.
#####################U1 FIRMWARES##########################
U1_DevDigitel_QI5_V2 -
Deodexed stock sprint QI5 Base - Using Superrs Kitchen
Bundled Sprint CSC with matching apps to restore VVM, Wi-Fi Calling and Sprint Zone
Removed carrier data for non Sprint devices
Further removed non essential market apps
Injected Latest SuperSU and BusbyBox parts
Removed KNOX Based Apps
SeLinux Set to permissive,Dm Verity Patched (Due to using Eng boot.img)
U1_DevDigitel_QI5_V3 -
Removed Additional Bloat
Now able to un-check apps on the main setup wizard
Init.d & SU.d Support added to system ( Without Kernel dependencies)
Added 3Minit Battery Mod
Zip-aligned Apps after changes were made for optimization.
ADB Mount/Remount Mod
Killed IZAT reporting/logging app
U2_DevDigitel_QI5_V4 -
Added Viper4Arise, Viper4AndroidFX, Viper4AndroidXHIFI (Viper4Arise you will have to install driver via app and reboot to use , this breaks V4A)
Added Custom DDC, Kernel, Profiles For all 3 Viper Apps to use, Compiled from all their builds, 130+ options easy!
Added Users Mode for multiple users - Click Profile icon in the status-bar / quick toggles to setup additional users. Max of 5
Disabled multiple device loggers, this should increase battery life, increase performance Aka Mild Build.prop tweak
Debloated more non-sprint services
Added Google Photos - Google Lens Feature ( Pixel 2 pure google feature)
Probably other things ive forgotten to mention....
U1_DevDigitel_QI5_V5 -
All Builds now set to mount system RW / wipe system files only without user-data
Added Full Busy-box Run Parts to insure no mods would fail to be implemented.
Patched imsservice.apk to hide the RCS and VOLTE icons, no need to use 3rd party app to hide.
Added DexDesktopmode to system for Dex desktop docks
Changes to build.prop to include fix for SHealth Security and other Knox blocked apps
Removal of more non sprint services ( Multi-Carrier items)
Modem For AQI5: Flash with Odin after flashing rom. Don't/Wont wipe anything
Link:https://www.androidfilehost.com/?fid=817906626617958621
#####################U2 FIRMWARES##########################
U2_DevDigitel_QK3_V1 -
First Release on latest November Security Patch. I believe I have moved everything over that was built into the revision 5 build and merged it with the latest firmware after de-odex
Modem For BQK3: Flash with Odin after flashing rom. Don't/Wont wipe anything
Link:https://www.androidfilehost.com/?fid=817906626617952674
U2_DevDigitel_QL9_V1 -
Dec Security Patch - Minor additional debloat, fixes for non facing issues.
Based on Sprint QL9, This is to replace the QLA variant used for dec patching ( Prev. Based on Tmo Firmware)
Modem For BQL9: Flash with Odin after flashing rom. Don't/Wont wipe anything
Link:https://www.androidfilehost.com/?fid=817906626617958620
#####################U3 FIRMWARES##########################
U3_DevDigitel_BRA6_V1 -
Jan Security Patch -Based on Sprint BRA6 Firmware, DeOdexed, Surround Sound Mod Added & Modded to work with Viper.
Moved all mods from Previous Version.
Modem For BRA6: Flash with Odin after flashing rom. Don't/Wont wipe anything
Link: https://www.androidfilehost.com/?fid=962187416754460857
U3_DevDigitel_BRB4_V1 - FINAL 7.1.1 BUILD
Feb Security Patch -Based on Sprint BRB4 Firmware, DeOdexed, Surround Sound Mod REMOVED, You must remove extension from the mod to activate now.
Modem For BRB4: Flash with Odin after flashing rom. Don't/Wont wipe anything
Link: https://www.androidfilehost.com/?fid=673956719939832589
Haha !!! 1st! Can't wait to give this a go. Thank you for your hard work! You rock!
Well ive narrowed down the camera to a issue with the updater script and the links/perms to the hardware for camera. Not sure where to start as the stock img and the eng img built very different scripts.. gonna have to play around some and see.
WOO!!! Glad to see you got it working before me!
I wanna go for a ride.. I'm buckling up!
Sent from my SM-N950U1 using XDA-Developers Legacy app
Was thinking about flashing but first wanna confirm. There is currently 2 things that don't work, the flashlight and camera? Is that correct still? Because I use those 2 daily lol
powerstroke said:
Was thinking about flashing but first wanna confirm. There is currently 2 things that don't work, the flashlight and camera? Is that correct still? Because I use those 2 daily lol
Click to expand...
Click to collapse
Yes that's correct
Both are still not working. I'm still just in testing phase that it's flashing with flashfire and booting correctly for multiple people. Wiping data etc and it still works. Looking for fc's etc. I'm working on redoing the scripts in hope the cam and flash are just tied to the perm/metadata/symlinks auto generated by my tool
Team DevDigitel said:
Yes that's correct
Both are still not working. I'm still just in testing phase that it's flashing with flashfire and booting correctly for multiple people. Wiping data etc and it still works. Looking for fc's etc. I'm working on redoing the scripts in hope the cam and flash are just tied to the perm/metadata/symlinks auto generated by my tool
Click to expand...
Click to collapse
Ok, I'll wait to flash then because I use both daily lol
It didn't flash for me per the op. Suggestions?
Sent from my SM-N950U1 using XDA-Developers Legacy app
treoarx said:
It didn't flash for me per the op. Suggestions?
Sent from my SM-N950U1 using XDA-Developers Legacy app
Click to expand...
Click to collapse
What happened? I'm thinking you would need to have selected wipe system and data and placed it at the top 1st because you are coming from a non deodexed Rom and i completely forgot about this step as I've been on deodexed myself for some time and it wouldn't effect me. If you want to give it another go that would be what would cause the issue.
Team DevDigitel said:
What happened? I'm thinking you would need to have selected wipe system and data and placed it at the top 1st because you are coming from a non deodexed Rom and i completely forgot about this step as I've been on deodexed myself for some time and it wouldn't effect me. If you want to give it another go that would be what would cause the issue.
Click to expand...
Click to collapse
10 4
Sent from my SM-N950U1 using XDA-Developers Legacy app
Glad to see you over here. Still using your V20 rom until I can upgrade to the N8.
well great news! got everything sorted out, decided to start from scratch and deodex my own base, added the sprint files needed for wfc and the sprint zone stuff, figured out the perms and links and got camera and the flash fixed! uploading a new version now. will be ready in 30min!
op will be updated with correct process to install as well
Team DevDigitel said:
well great news! got everything sorted out, decided to start from scratch and deodex my own base, added the sprint files needed for wfc and the sprint zone stuff, figured out the perms and links and got camera and the flash fixed! uploading a new version now. will be ready in 30min!
op will be updated with correct process to install as well
Click to expand...
Click to collapse
Looking forward to downloading once uploaded, thanks for fixing the bugs
OP HAS BEEN UPDATED AND FRESH DL LINK IS AVAILABLE!
Make sure to review steps as they have changed, and i have attatched photos to op of the way flashfire should look.
Thanks so much for your hard work!
One question - I'm not rooted (yet); does flashing this (and hence being rooted) limit us to charging up to only 80%?
Thanks in advance!
altimuh said:
Thanks so much for your hard work!
One question - I'm not rooted (yet); does flashing this (and hence being rooted) limit us to charging up to only 80%?
Thanks in advance!
Click to expand...
Click to collapse
Yes once rooted we are stuck at max 80% charge
Ok thanks - just got my note 8 on Saturday and I'm dying to root it. I'm just having a hard time accepting a 20% loss lol.
Hopefully the masterminds figure out a way to overcome that.