[ROM][Umi Zero ] (UPDATE 02/11/15)Arcatarc's "EMUmIZERO" - UMi ZERO ROMs, Kernels, Recoveries, & Other Develo

(UPDATE 02/11/15)Version EMUmIZEROCompleta......full EMUI3 Experience!
For a SUPERLEGGERA (superlight) version of it check this thread: EMUmIZERO SUPERLEGGERA
******************************************************************************************************
INSTALLATION using ROOTJOY:
For the ones who prefer to flash the rom with ROOTJOY:
1: Download the Rom zip and replace " updater-script" inside folder "META-INF\com\google\android" with this one(unzip it before)
...now flash it by selecting the new created zip in rootjoy....that's all my friends...
******************************************************************************************************
INSTALLATION using CUSTOM RECOVERY (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-------------------IMPORTANT STEP----------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
THIS STEP IS VERY IMPORTANT BECAUSE MY TWRP MAKE A BACKUP OF VITAL PARTITIONS WHERE IS STORED IMEI,MAC ETC...
it's a good idea to copy the backup folder on your PC, it could be very useful in future in case of problem with missing IMEI and other trouble...
-------------------IMPORTANT STEP----------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (Without exit from recovery) Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on EMUmI!
******************************************************************************************************
IMPORTANT:
ALWAYS CHECK SERVICE PACKS THREAD and flash the latest one(if present)!
Before asking ALWAYS check TIPS SECTION,probably you will find (probably)a solution.
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS

Screenshots
Some Screenshots:

Service pack
Service pack:
Not needed in Rom UPDATE 02/11/15

ADDONS:
ADDONS:
Here you will find "MODULES" to install and obtain new functions:
For those having troubles with 3G data connection (check the frequencies supported by your mobile operator)(flashable in recovery without wipe):
BASEBANDS(Modem):
900 Mhz Baseband:
800/850/900 Mhz Baseband:
-------------------------------------------------------------------------------------------------------------------------------
EngineeringMode (Extract folder and install like normal apps)
MaxxAudioFx:
http://forum.xda-developers.com/android/general/maxx-audio-effects-mediatek-edition-t3044224
Am3D Zirene Audio Fx:
http://forum.xda-developers.com/android/development/sound-mod-am3d-zirene-audio-fx-t3152714
New Fonts:
http://forum.xda-developers.com/showthread.php?t=3032517
KERNELS:
(1.7Ghz)EMUmI_021105_DefaultKernel.zip (Default one included in rom zip,stablest and battery friendly)
(2.0Ghz)EMUmI_021105_Kernel.zip (Fastest but not underclockable)
All Kernels are flashable in RECOVERY.

CHANGELOG
CHANGELOG:
Installation script modifyed according with new (fixed) recovery....now both are "how they should be!".
Totally rebuild from newest Huawei firmware 268 Version.
Plenty of Optimizations and security Patches,included Stagefright bug
New Music app with Equalizer and full working songs dowload
New Baseband from stock Huawei firmware (better??)
Improved Camera
Improved GPS(agps enabled and editable in location setting).
Improved&Fixed all Sensors(now we have a full working compass!).
Added Compass app.
Re-edited new kernel with fix and optimizations.
Improved stability.
Full DTS Sound included!.
Huawei ID & related apps removed (not need to register to download themes).
Patched Service.jar(you can install engineering apps!..you can find them in ADDONS thread),many tnx to eryen :good:
Adopted some Folder&Files (from Huawei firmware)to menage various startup configurations(power policy,icons,toggles default home screen etc..).
Added "Motion control" in settings.
...probably some other things i don't remember..
Full working in every single function(exept the one mentioned in bugs thread)
.......FULL HUAWEI EMUI EXPERIENCE TRANSPLANTED TO UMI ZERO!.
NEW SECTION ADDED: "ADDONS":Her you will find "MODULES" to install and obtain new functions.
P.S.: Superleggera(Superlight) Version will be uploaded ASAP!

BUGS&TIPS
BUGS:
....probably you will find "G750-T20" or "Huawei" in some places:this is needed for the firmware to working(many libs and function refering to those names)
........
TIPS:
NVRAM WARNING: ERR 0x10 (& random WLAN MAC ADDRESS) ???....HERE THE DEFINITIVE SOLUTION
To download Themes and Songs remember to have simcard inserted and not to be in "Flight Mode":Those apps need to access your IMEI number to finalize autentication..
EMUmI is PREROOTED but there isn't the Supersu apk,all apps needing root will work well,i suggest to install SuperSu(from market) only if you need to manage apps permissions..
The rom is FULLY ODEXED (more stable&fast)....so is not reccomended using Titanium or similar app to remove and then restore apps:It will remove the related libs from system but it will not restore them...so i suggest to use it only if you know what you are doing..(to reinstall an app you need to extract the libs from his .apk and copy them to system/lib again.....)..however you can restore "Only data" of apps without problems.
Many Google related apps are not present(tts,search...)first of all to gain space,second because they are often updated....if you need them you can download from Market without problem..
How To Enable On Screen Soft Buttons:modify this line in build.prop:
#qemu.hw.mainkeys=0
TO
qemu.hw.mainkeys=0
(remember to left an empty line at the end of build.prop!)

First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app

Downloading, gonna test.
I hope huawei and lenovo will bring us more stable firmwares.
Thanks for porting.

Thank you very much for your job!

arna1958 said:
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can:mine is a modded version of it.....

Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:

River825 said:
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
Click to expand...
Click to collapse
Can you share some pros/cons compared with stock 3.05?

Hi
Rom is multilingual?

Does this ROM supports double tap to wake ? Are there ang chance that photos are better?

alvin2014 said:
Hi
Rom is multilingual?
Click to expand...
Click to collapse
Yes it is MultiLanguage...

mightystorm said:
Can you share some pros/cons compared with stock 3.05?
Click to expand...
Click to collapse
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet

River825 said:
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
Click to expand...
Click to collapse
Did have you try enabling DTS sound?

kovalski1 said:
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
Click to expand...
Click to collapse
I am also interested in the "double tap to wake" or so called "knock code".

JankyLV said:
I am also interested in the "double tap to wake" or so called "knock code".
Click to expand...
Click to collapse
I think it could be inplemented(lib files are included in system)i'll try....

Good work to continue. Congratulations. You ported the rom from which Huawei model. Thanks.
Sent from my HUAWEI MT7-TL10 using Tapatalk

Related

[ROM][02-jan-2011][PATCH update]FolioTntMod v0.4a for Toshiba Folio100

!!This is ONLY for Toshiba Folio 100!!!
This Mod is based on Tnt Stock image for Viewsonic G tablet and now working on our Folio 100.
V0.4 EDITION BREAKS QUADRANT SCORE OF 3000+ with fs optimization patch
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod or you can visit my new homepage at Dexter's mods
Folio100 Wiki pages available here and here
Other non-FolioMod , but folio100 threads Kernel&Tweaks & General questions thread
Please use these for non-FolioMod questions, like screen,battery etc...
Installation Instructions:
ALWAYS HAVE CHARGER CONNECTED WHEN UPDATING A FIRMWARE
Download FolioTntMod v0.4
Extract contents to a folder and follow instructions below or Readme inside zip file.
copy the update.zip to a sdcard, and insert sdcard into folio.
Enter "Recovery menu" when folio is just turned on and press (POWER) once and (VOL up) next.
press (VOL up) Factory reset or system update.
press(VOL down) to continue to system update.
press (VOL up) to confirm system update.
during installation progress bar will show har far it is.
folio will reboot after installation.
if you need to wipe, repeat the steps above without sdcard inserted, and you get into recovery menu. Press "HOME" button to see menu and choose "factory reset".
Rollback to original stock rom:Download Folio stock image for full restore to stock rom
extract zip to a folder, and from here follow steps 1 - 9 above, to install the update.zip .
This image is for rollback purpose, if you do not want the mod edition, here is the way back to stock rom.
Remember to run a factory reset before or after this stock rom install..​
Old releases
Mirror 1 - FolioMod v0.3a Nvidia based
Mirror 1 - FolioMod v0.2a Nvidia based
Patches
IMPORTANT PATCH 02-01-2011 - Fixes serious fs optimization problem download here
This patch will automatically enable the fs optimization in v0.4 as well.
Rename zip file to update.zip and install using recovery menu.
Known issues (also reported by users)
- Wifi seems to work in inverse on v0.4, you need to force "always enabled" in avanced settings, to have it turn off when not used
- all - Cannot use "clear data" in "manage application".
- Vending(Market app) has wrong icons (stars looks wrong)​
CHANGELOG
v0.4a
Fixes serious problem with fs optimization , if a crash occur.
Fixes wrong sensor library used.
v0.4
Wifi adhoc/regular mode possible with FolioWidget (installed seperately)
Games orientation fix by weeds2000 (tested with Asphalt5,3d tilt as example)
Nvidia performance pack v2 (originally built by rothnic/xda-forum)
(Quadrant 3D performance increase is +400 compared to previous runs)
filesystem optimization addon solution
* put "update-enablefsoptimize.zip" on sdcard, rename to "update.zip"
and run through recovery as normally with update.zip to enable optimization.
DO NOT EXTRACT "update-enablefsoptimize.zip"!! JUST RENAME IT.
(Quadrant I/O performance is adding another 700+ points to score)
Custom kernel included for CIFS support
v0.3a
Audio missing with tnt drivers, so its using folio drivers now.
v0.3
Based of latest TNT release 1.1-3338
Added Gapps support
Added Superuser apk
Removed a few unneeded apks (OTA update for TNT only)
Paid Apps can be downloaded in this version!.
Fixed framework to utilize our external sdcard + usb stick.
Thanks to all those which have donated. Its truly appreciated to see people actually like this and would pay a little to get the improvements in place!!
Thanks!
Thanks to all who reported on beta-testing of this latest release..
WARNING: Use this image at your own risk and i take no responsibility if
you brick your tablet.. Image has been tested on a Toshiba Folio 100 and works fine if guidelines are followed.
FIRST!!!
Thanks Dexter!!!
downloading now...
Thanks
downloading..............................
My Folio should come in few days and I have questin, which room should I choose? This one or 1.2?
Best regards M-XXXX
Hi Dexter,
Do we need Wipe Before Installation ?
shpitz said:
Hi Dexter,
Do we need Wipe Before Installation ?
Click to expand...
Click to collapse
yes..
and sorry..
download has been pulled...
framework does not seems to work with new Vending.apk app..
i tested it fine with old vending apk, and at last moment installed new Vending apk and now it crashes.
Cool, wait until you upload a revised version.
Hi Dexter,
Do yu think it's possible to use TitaniumBackup Backup(Program and system) from 1.2 to réinstall program and system on these 0.3?
Thanks
Stéph.
Ive installed the "crashing" version...
now I wait for the new release...
but...
it's possible to have some some more languages (i.e. Italian )
Ive force close with contact app...maybe a new market related issue...
I cant set my own wallpaper...ther is a way to do that please?
btw great rom! maybe better than foliomod! I really like the new interface!
ps. no screen lock. Ihave to set it somewhere?
davidebeatrice said:
it's possible to have some some more languages (i.e. Italian )
Click to expand...
Click to collapse
did you try "morelocale2" as i suggested in readme?
davidebeatrice said:
I cant set my own wallpaper...ther is a way to do that please?
ps. no screen lock. Ihave to set it somewhere?
Click to expand...
Click to collapse
don't know.. normally you can "lock screen" in settings.
HCPASS said:
Hi Dexter,
Do yu think it's possible to use TitaniumBackup Backup(Program and system) from 1.2 to réinstall program and system on these 0.3?
Click to expand...
Click to collapse
apps yes, but generic settings for the specific edition no..
as this has other framework + different launcher, some settings differ.
but try and find out, you probably find some apps crashing, but then try uninstalling and reinstall.. never tried it.
Dexter_nlb said:
did you try "morelocale2" as i suggested in readme?
Click to expand...
Click to collapse
oops...didn't readed
Dexter_nlb said:
don't know.. normally you can "lock screen" in settings.
Click to expand...
Click to collapse
i cant find screen lock option in settings...
wallpaper issue?
thx!
First experience (except for my small marketapp problem)
is , that it download/install faster... and lagging seems less here?
Of course post experience compared to my Toshiba edition, so we know if its worth using or just maybe, the fact that our Toshiba edition is actually is quite good..
Seriously I love it, it's running perfectly great:
-notification bar and setting are just awesome..
-wifi working great for me
-memory usage is good
-battery and standby I'll check tomorrow after night testing
-SDCard works great even with toshiba file manager (used titanium backup to install back my apps)
-new home also great but less responsive
-launcherpro or adw.launcher both works great but "setting" doesn't work since it's using new setting app
-Browser and mail client looks great
Still some bugs:
-No 360° rotation - Sorry 360° works great but doesn't work with home default launcher
-Only english (us & uk), more local 2 don't change a lot
-Taskmanager doesn't work
well this is my feedback after few minutes testing
again Dexter a great work, thanks
PS/ Happy Holidays for all
Dexter_nlb said:
download/install faster... and lagging seems less here?
Click to expand...
Click to collapse
I confirm...
bigbbl said:
mail client looks great
Click to expand...
Click to collapse
I love it!!!
bigbbl said:
-Only english (us & uk), more local 2 don't change a lot
Click to expand...
Click to collapse
you must be doing something wrong, i got like 15 languages selectable, and even more, when i type my national code as explained in readme.txt .
so check again.. many lang's works fine on this one, just using morelocale2
Hi all,
thanks for this new mod Dexter, but I've some questions :
- With morelocale2, I've change the langage to french, but I've always a QWERTY keyboard, any idea ?
- The mail app don't sync my email with hotmail in exchange, do you know why ?
I like this mod, you're doing a very good work, all my respect
Cheers
hi dexter,
Did You upload the updated version without the crash?
shpitz said:
hi dexter,
Did You upload the updated version without the crash?
Click to expand...
Click to collapse
yes it just finished now.. and its verified!!!

[ROM][S3] BackToBasics_v3 (based on RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110)

So here we go I can say finally I managed to produce firs custom rom for our beloved HTC One S C2 (I called it this way cause that is how on gsmarena.net is presented). If we ever get a sub forum this is how I suggest it is called. It is not very special rom, but it is a start. cause I don't like bloatware on my phone, I've tried to remove as many unnecessary stuff as I could remember, and I could miss.
Since this is my very first rom I've build with kitchen (for public use at least), don't be to harsh on me. I will try to improve it, and remove even more sens components, cause I just prefer stock experience.
You will need android sdk on you computer (you may know it as adb shell)
REQUIREMENTS
Unlocked Bootloader and Root access
TWRP Recovery
INSTALLATION
1. Download the ROM, extract only boot.img where you have android-sdk installed installed in folder platform-tools
2. Make a backup of your apps with Titanium backup or other similar app (so that you can restore them after flashing my rom)
3. Boot into Recovery (with GooManager, or restart phone and hold volume down, when in fastboot choose recovery with volume down and press power button)
4. Make a BACKUP in recovery!
5. WIPE! Do a factory reset and System wipe
6. "install zip from sdcard"
7. "choose zip from sdcard"
8. Flash the ROM
9. Go back to the main menu of recovery, choos reboot, and then reboot to bootloader.
10. Flash kernel with Command prompt (go into direcotry where you have extracted boot.img) and run:
(step by step guide)
Short version:
Code:
fastboot flash boot boot.img
fastboot erase cache
fastboot reboot
11. Wait until android boots up, it will take a few mintues (5-10), because it is deodexed, but only first boot takes longer after that it is normal.
What is working:
Since this is sense based rom all the functionality should work (calling, texting, mobile data, GPS, wifi, bluetooth, camera, etc)
POSSIBLE PROBLEMS:
- There might be some reports of some services stop executing, this is nothing to worry about, it would just be something that I have removed cause it is only sens based and drains battery, but it should impact with phone experience.
- Due to all HTC widgets removal, not all the lockscreen options are functional (like people).
FUTURE:
I hope I'll have time and the will to make this rom to look and feel almost as an AOSP based (that is with statusbar, lockscreen, dialer, settings, etc). But I am still learning so don't expect to much. If there is themer among you or modder, I would really apperaciate some help with this stuff. Together we can make this something ! I would also need some mirror if this rom will become popular.
WARRINING:
This rom is for HTC One S with S3 processor only!!!
Flashing any kind of custom rom voids your warranty, and it could brick your phone. I am not responsible if this happens to you. So you flash this software completely at your own risk!
That being said here is the download link.
BackToBasics_v1
BackToBasics_v2:
(you have to downloade both rar files in sam folder and then extract from .part1, it will extract flashable .zip)
PART 1
PART 2
BackToBasics_V3
If you are coming from lower version of this rom, just make backup, wipe cache, flash rom and you are good to go. No need to factory reset (data wipe) or system wipe in this case
THANKS TO:
- dsixda for his amazing rom kitchen
- torxx for his update-binary and updater-script
- Chainfire for SuperSU
- PaulOBrien for his superboot, which provide us root
- Tesla Coil software for Nova Launcher
- Estrogen Inc. for File explorer
- everyone else that makes this community so good!
If I forgot somebody important please forgive me and let me know, I will immediately add him or her.
[ROM][S3] BackToBasics_v2 (based on RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110)
About rom:
v3:
- HTC Lockscreen widgets enabled (People, Weather, FriendStream, etc)
- HTC Locksreen shortcuts re-enabled with application Lockscreen Shortcut (thanks to itandy)
- Added missing Gallery
- Updated SuperSU an Su binary
- Updated ES File Manager
- Added GooManager for easy rom flashing and backing up
v2:
- root access now works
- WIFI problem solved
- Camera problem solved
- added Busybox free application
- removed boot sound (it really annoys me)
v1:
- Based on RUU_VILLEC2_U_ICS_40_HTC_Europe_1.11.401.110
- All originally included languages are in there
- Deodexed
- Zipaligned
- Rooted with SuperSU
- Added busybox run parts
- Removed Rosie launcher and replaced with Nova Launcher (free version)
- Included ES File Explorer
- Insecure boot.img (stock kernel) -> adb shell root enabled
- A lot of build.prop tweaks
- Added /data/app/ functionality
- /etc/init.d script support
- custom bootanimation support (but for now I've kept original boot animation)
- 95 removed apps (all sens widgets and other stuff)!
Congratulations for the first S3 rom :]
EDIT: I noticed that you didn't claim two posts. So if you need to expand the content to this post just send me a PM and I will add it to this post erasing my content.
thx!!!
downloading
haha that's very good
hohoho
very nice to see an s3 rom get here!
Qzem, you should include some screenshot in first post.
oww .. what i should say ??? CONGRATZ TO OUR S3 DEVICE !! :laugh:
Thanks for the share.. works great.
I having a super hard time connecting my wifi ... stuck at obtaining IP address all the time !!
Down not working from dropbox
Sent from my HTC One S using xda premium
Alright , I found a solution for wifi obtaining IP address problem .
This is just a temp way to do it .
go to ur specific wifi , long press it . Click show show advance option . and choose static IP . Key in the data .
It connect successful . qzem , try to find what is the problem for cant obtaining ip automatically . It would be quite suffer when wanna use public wifi
waint for a link to download
Problem at my devices :
1) Can't save picture after took picture using camera app .
2) superusers got problem , can't get permission for the apps .
3 ) wifi cant get ip address automatically . ( have to manual set up static ip )
I will get to debugging and trying to fixing problems on monday,cause I am on camping for weekend with my buddies .
Sent from my HTC One S using xda app-developers app
Any chance its possible to remove the 3 button menu and remap menu to long hold home?
Sent from my HTC One S using xda premium
onlinechi said:
Any chance its possible to remove the 3 button menu and remap menu to long hold home?
Click to expand...
Click to collapse
Is this mode available for One S? This would be first thing I would like to change for sure :good:
There is some info HERE
Try this WIFI fix and report if it works. I am gonna test soon. And if it does I will include it in next version.
banesi said:
Is this mode available for One S? This would be first thing I would like to change for sure :good:
There is some info HERE
Click to expand...
Click to collapse
I can include this, but I will read a little more, to see if it is worth it.
EDIT: Good news I've solved WIFI and root problems. Will upload new build tommorow, cause I most probably I won't have enaught time today.
New version is up!
I suggest you to change thread caption to v2, and to move up changelog for v2.

HUAWEI ASCEND G510 u8951-0100 ROMS & TWEAKs(NEW LEWA OS.V5)

Well ,i create that new tread because of that specific device HUAWEI U8951-0100.
Unlucky other that device they left it to die(...) EXCEPT DEVELOPERS around the world.
Please i don't want donate , exept if you find somthing really helpfull.
As i know there is mainly SEVERAL types of that model:
U8951-010,U8951-0100, AND U8951-0200 e.t.c
I THING ONLY U8951-0100 HAVE NO firmware U P G R A T E S
Can some one knows WHY?
Any way for all those that have this version you can install "eng" versions of that link http://www.mediafire.com/?00nn01girip80
.I tested works good. I am absolutely sure that ROMS is nicer AND FASTER rather than
VODAFONE ones.
Before of that you must already have unlocked boot loader (HUAWEI) official and a recovery openrecovery-twrp-2.6.0.0-u8951.img
The LEWA team works very effectively as you will see. Thanks LEWA team
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.BE AWERE
INSTRUCTIONS
1 save zip rom file on sdcard.
2 turn off phone
3.push volume up and power for at list 10 sec
4 on recovery state select wipe data
5 select wipe cache
6 select install
7 select your rom zip
8 re-wipe
9 reboot
enjoy
Also gapps from here :http://forum.xda-developers.com/showthread.php?t=2240652
If you have lite time you can uninstall (useless) apk by using link2sd or titaniumbackup.Both can uninstall system applications easily .
NEW UPDATE ---->LEWA 23.8.13
http://www.4shared.com/zip/i0n04rnL/LeWa_HUAWEI_C8813D_JB_ROM_1308.html
ADDITIONALL
---------8/18/13 WIFI MALFUNCTION---------->SOLVED
---------23.8.13 2X SPEED WIFI TWEAKS[/COLOR
---------09.9.13 NEW G510 UPDATE https://docs.google.com/file/d/0B7aiJXKXWaVRbUlQVllNZTJGQUU/edit?usp=sharing
HUAWEI G510 17.9.13 UPDATE LINK====>https://docs.google.com/file/d/0B7aiJXKXWaVRT1gwQk1uNFVWcTg/edit?
usp=sharing
(for some details look the post)
HUAWEI G510-0100 28/10/2013 NEW LEWA UPDATE OS v.5 link:https://drive.google.com/file/d/0B7aiJXKXWaVRZU84RmVvRlVfZUk/edit?usp=sharing
(for more info below )
So is this just a official eng rom for the G510-0100 or is it a custom rom? how do i install it ? from dload folder o sd or can i use CWM?
If it is a stock rom will or is there any custom rom or is there going to be a Cyanogen port for the G510-0100?
Is a custom ROM.I installed via twrp version 2.5 or ,2.6( first post).
There is weekly updates for that ROM (china web) but I must do some modifications to Google installer for compatibility.
I will upload only critical rom updates(slow upload limited).
-THERE IS NO OFFICIAL UPDATE FOR THAT SPECIFIC MODEL...AND PROBABLY WILL NOT....FOR UNKNOWN REASONS...
Sent from my HUAWEI C8813d using xda app-developers app
---------8/18/13 WIFI MALFUNCTION----------
It appears wifi malfunction on that rom but not only .ALL new hardware (MORE-LESS) with a new wifi chip are no full compatible with JB 4.1.2 (.Even stock Vodafone...B171)
I resolve it in my device and now testing... .If some one want it just let me know. maybe i could make a patch.
Sent from my HUAWEI C8813d using xda app-developers app[/QUOTE]
Huawei g510-0100 wifi fx
gyankamp1 said:
---------8/18/13 WIFI MALFUNCTION----------
It appears wifi malfunction on that rom but not only .ALL new hardware (MORE-LESS) with a new wifi chip are no full compatible with JB 4.1.2 (.Even stock Vodafone...B171)
I resolve it in my device and now testing... .If some one want it just let me know. maybe i could make a patch.
As a say wifi fix is ready:
But there is no time for flashable zips(…).Be patient.
Instractions:
DOWNLOAD FIX ARCHIVE http://www.4shared.com/rar/AF266kS1/G510-0100_wifi_FIX.html
(ALL ARCHIVES TESTED FOR VIRUS AND OTHER MALICIOUS AND IS SAFE) A V A S T
You need a good file explorer (I use rootexplorer)
Aprox 10 minutes of time.
-extract zip to sdcard
-TURN OFF WIFI
-open root explorer go to /data/misc/
AND DELETE WIFI FOLDER
1 . FROM EXTRACTED FOLDER
COPY /LIB folder copy /paste all (4) files to -- /system/lib/ (and replace existing)
THEN GIVE THEM (4) , PERMISSION RW-R-R each (FROM EXPLORER SELECT PERMISSIONS)
2 .GO TO SYSTEM FOLDER: /SYSTEM/WIFI/ ON YOUR SYSTEM PARTITION AND DELETE ALL FILES/FOLDERS
3 .GO AGAIN TO zip EXTRACTED FOLDER and COPY/PASTE ALL STUFF FROM /WIFI FOLDER To -- /SYSTEM/WIFI/
FINALLY GIVE TO ALL FILES RW-R-R PERMISSION ON /SYSTEM.WIFI/ AND FOR FOLDERS(2) RWXR-XR-X
example http://www.4shared.com/photo/k36F8xbg/folder_correction__1_.html
example http://www.4shared.com/photo/_ZOtzsET/file_correction__2_.html
REBOOT
NOW YOUR WIFI MUST BE PERFECT
(PLS press thanks button to know that works for you also or replay )
Sent from my HUAWEI C8813d using xda app-developers app
Click to expand...
Click to collapse
[/QUOTE]
2x wifi tweaks
[/QUOTE]
i already tested.It works.
I post this because it was surprise me. Wifi became double speed!!!
Instractions.
1.download this zip http://www.4shared.com/rar/4NugfNw4/2X_WIFI.html
2. unzip on your pc and move it to your sdcard.
3.from unzipped folder install PimpMyRom-alpha-3.3.1.apk
4.run it and go to tools / universal init.d support and just ACTVIVATE it. and then close program.
5.take second file 99SuperCharger and copy/paste on /system/etc/init.d folder (by rootexplorer)
6 reboot
If you use speed tester you can see the difference by numbers.http://forum.xda-developers.com/images/icons/advanced/clock.png
Also afterwords you can uninstall the PimpMyRom-alpha-3.3.1.apk.(depends on you)
enjoy
P.S ALL BENEFITS MUST GO TO V6SUPERCHARGING TEAM
23.8.13 update lewa huawei g510-0100
I try to post critical updates for LEWA roms.
Update 23.8.13
http://www.4shared.com/zip/i0n04rnL/LeWa_HUAWEI_C8813D_JB_ROM_1308.html
INSTRACTIONS TO FLASH :look first post
BUT DON'T WIPE ANYTHING IF YOU WISH TO KEEP YOUR DATA.
ALL tweaks MUST RE-INSTALL AGAIN.(i can do anything for that).
(the Chinese version you must know we can't install it in our device)
This is a Leawa ROm from a China boy.Is from 23/7/13 Lewa update for g510-010 but works also for g510-0100.
Has already wifi fix correction. http://shuajidown2.lexun.cn/down/NIKOLU/2013/08/29/LeWa_HUAWEI_G510-0010_13.08.23_4.1.zip
In my opinion those roms have a lot of applications mated for China.That STUFF makes rom HAVY.
Compatibility
You say: " how it is possible to be functional a g510-010 rom to g510-0100."
Well its not strange.Actually incompatibility exist on HUAWEI stock roms.
Now about custom rom it depends. Various custom rom can be compatible with ALL g510 (all versions).Frequently ,
boot.img causes problems (bootloops) or malfunction as (no network reception) because of wrong baseband.
All those problems can be solving but we must wait a lite bit.Now its very risky to change par-example radine wrong step
and mobile Hard/brick. Most important is unblocking FLASH DRIVE.Afterwords all it will be safer.
At list (but not last) a interesting OVERCLOCK.
HUAWEIG510-0100.Android4.1.Emotion_UI.V100R001XXXB171
HUAWEI G510-0100.Android4.1.Emotion_UI.V100R001XXXB171.
IMPORTANT SUGGESTION for all those using that firmware as is or as a base for a custom rom.
Compering with A G510-0100-V100R001XXXB170 version.
IT'S BETTER USE B170 BECAUSE:
-HAVE MORE STABLE MOBILe cell SIGNAL.
- STRONGER MOBILE cell SIGNAL
-HAVE MORE STABLE WIFI SIGNAL
-STRONGER WIFI SIGNAL AND FASTER DATA TRANSFER
ALL THOSE I CHECK IT TRIPLE
Well ,for that reasons i prefer use B170 firmware as base.
You?
HUAWEI G510-XXX LEWA UPDATE 6/9/13
-NO NEED ANY WIFI PATCH ANYMORE
-APK otimazation
--added NIGHT MODE
many more
UPDATE LINK: https://docs.google.com/file/d/0B7aiJXKXWaVRbUlQVllNZTJGQUU/edit?usp=sharing
HUAWEI G510-XXX LEWA UPDATE 17.9.13
update link: https://docs.google.com/file/d/0B7aiJXKXWaVRT1gwQk1uNFVWcTg/edit?usp=sharing
on that update; 1. impruve wifi replace wifi module and drivers
2. deleted some drivers that isn't necessary
3. delete some aplications
g510-0200 b189 backup
I made a back up of my factory stock rooted b189 g510-0200 rom with twrp . if anyone needs it i can send them a link to my dropbox. its a very nice rom but you cant download it from anywhere cause huawei only have the old rom b173 on there web site. . this is the latest rom with huawei notification toggles enabled. if you have twrp you can just copy my back up to your sd card then restore with twrp. :good:
sonyachin said:
I made a back up of my factory stock rooted b189 g510-0200 rom with twrp . if anyone needs it i can send them a link to my dropbox. its a very nice rom but you cant download it from anywhere cause huawei only have the old rom b173 on there web site. . this is the latest rom with huawei notification toggles enabled. if you have twrp you can just copy my back up to your sd card then restore with twrp. :good:
Click to expand...
Click to collapse
You can write the link (if you want).I thing it will be better for some one who wants give a try.
About f ir m w a r e u p d a t e
[...] All people that working on android devices spend all lot of time.I say that because a notice that there is some archive roms for g510-0100 (b196) etc.,THE IMPORTANT THING IN A F I R M W A R E U P D A T E is that upgrade or resolve critical low level routines(software- hardware configuration).
All the rest (system softawere) kernel e.t.c is match more easier to find solutions.
UNFORTUNATELY THE PROBLEM IS THAT WITH THOSE FLASH ROMS DOESN'T DO ANYTHING ON THAT DIRECTION.(this include ALL zip stuff (lewa).
There is a possibility to have (until December) a new JB 4.2.2 Official HUAWEI firmware up-grate.(WILL SEE).
Soon I will upload an lewa rom security update.
Sent from my HUAWEI C8813d using xda app-developers app
Lewa new OS version 5.
I prepared for G510.
I will upload at the end of October.
Soon...
Sent from my HUAWEI C8813d using xda app-developers app
28.10.2013 LEWA OS v5 FOR HUAWEI G510-0100
DOWNLOAD LINK======>https://drive.google.com/file/d/0B7aiJXKXWaVRZU84RmVvRlVfZUk/edit?usp=sharing
INSTRACTIONS:
-COPY PASTE ZIP TO SDCARD
-GO TO RECOVERY MODE
--FULL WIPE
-GO TO WIPE/ADVANCE AND WIPE DATA
-INSTALL ROM ZIP ARCHIVE
-wait 1 -2 minute
-reboot
ENJOY
[UNFORTUNATLY (BECAUSE OF MANY CHANGES) you must use titanium backup or an similar program to backup/restore you programs.
-additionally all my patches in first page must re-applyed EXEPT WIFI PATCH that i already applyed .
[/COLOR]
That Lewa upgrate to v.5 include many improvements-stabilities changes.
G510 problem - screen turns off in call
Hello dear friends,
My new G510 has a problem,
My screen turns off while receiving calls or calling someone,
and I can't turn it back on, not with the touch screen nor power/volume keys.
I tried to change to CM10.2 - but no dual sim support, so I went back to stock rom.
Please help.
Thank you
G510 problem - screen turns off in call
HUAWEI G510-0100 (Android 4.1.1)
Root (works with locked bootloader) – use the application to root then install superSU from Play store
http://www.cydiaimpactor.com/
Unlocking bootloader (be careful you could brick your device) http://www.huaweidevice.com/worldwide/servicePolicy.do?method=preUnlock
Or
https://www.dc-unlocker.com/huawei-ascend-y300-unlock
TWRP recovery
http://www.modaco.com/topic/362074-recoveryall-official-twrp-2631-root-21102013/
Other resources
http://www.modaco.com/forum/743-huawei-ascend-g510-development/
http://www.modaco.com/topic/365268-all-custom-roms-for-huawei-ascend-y300g510/

[ ROM ] - Dhollmen LOLLIPOP 5.0.2

.
Highlights:
Android 5 - Lollipop
Integrates the latest Dhollmen Kernel.
Supports NTFS file system.
Supports EXFAT filesystem.
Supports F2FS filesystem.
Available configuration options for Dhollmen Kernel overclock.
Integration of Viper4 Audio FX as an equalizer, amplifier and sound effects manager.
Supports for Joystick and game controllers.
Supports for gestures on the keyboard.
First Installation:
Download the zip file from Rom as tablet model
Download the add-on with pre-settings Viper4 Convolver IRS
Download the add-on with Google applications (Gapps)
Boot the tablet in recovery mode
Make "wipe data / factory reset" at this time
Install the Rom file
Install the Viper4 IRS file
Install The Gapps file
Reboot
Subsequent installations:
Download the updated zip file
Reboot to recovery mode
Do NOT any kind of "wipes"
Install the updated zip file
Reboot
Information:
Frequently asked questions you must read.
Downloads:
Recovery TWRP
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: Your assumes at your SOLE RESPONSIBILITY all results produced by the "software" and/or instructions in this thread.
XDA:DevDB Information
Dhollmen, ROM for the Samsung Galaxy Tab 2
Contributors
tuxafgmur
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Beta Version: 5.0.2
Beta Release Date: 2015-02-09
Created 2015-02-03
Last Updated 2015-02-15
.
> Rom's Notes.
Who installs this Rom, accept it "as is".
Contains just the apps and options installed.
What you want to add will have to be obtained from Google-Play or any other sources.
Please, don't report bugs if you are not using the installed Dhollmen Kernel.
In case of questions or comments, you must indicate additional apps, tweaks or installed "optimizations".
if you insert images, do it in a 'hide' tag. This hide your image until an user click to show it.
I assume you has installed a suitable Recovery and know how to perform the required steps.
Keep in mind that Antutu and others related apps give you very similar values, regardless of the Rom used.
In such apps, OC influence on speed, but its goal is to evaluate the hardware, not the Rom.
Don't use any kind of overclock before three consecutive stability test in Antutu.
> Rom take a long time to boot after installing.
It is quite normal because ART is used and applications are self-compiled at first boot time, after installing a new Rom.
> Applications are slow to start after installing.
It is quite normal because ART is used and have self-compiled before first use.
Although it may seem at times, the Rom is not hung, just have to wait.
> Get Root access.
In Settings app, entering development option and select Root access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Performance.
> Get Performance access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Development option.
> Google Apps (Gapps).
All Gapps packages available are virtually identical.
Only differ, from each other, in the amount of installed applications.
Never two different packages must be installed as likely to cause Google applications FC.
The Dhollmen Gapps, being valid for any Rom, are specifically adapted for installation on it.
> Viper4 - Convolver - IRS.
This application controls the System Sound FX.
It also includes a number of advanced pre-equalizer settings (made by others) that are the IRS whose installation files requested.
Access to Convolver (manager of the IRS) is obtained by selecting the option Expert in Experience Settings.
Using another equalizer (provided by external applications) usually interfere with it.
You can only have one active equalizer in the system, but if you want to use another one, kindly Viper4 can be turned off.
> Restoring backups.
It is very common Titanium Backup (or similar) problems in Rom.
If backup /data partition are made and, after a change of Rom, restored, usually side effects will occur.
In this directory and subdirectories it contains, there are many configuration files and internal databases.
When it comes to a specific application should not be a problem as long as it is not part of the Rom.
When sub-directories containing settings are restored, the likelihood of problems increases exponentially.
For example, all Roms have a Settings application, but the content of his configurations differs between them and is not interchangeable.
Under no circumstances you should restore /system partition apps.
> Brick Bug.
Don't worry about.
No problems here
> Recovery.
In the wave of failures of equipment, widely discussed and until the problem is completely cleared
The user is strongly advised not to use another recovery than Dhollmen TWRP-2.8.0.5 or Andi TWRP-2.8.0.1
First impressions: very smooth ??
Before I had slimlp. Did a full wipe and factory reset and installed it. No problems at all!
First reboot was much quicker than slimlp.
So far didn't find any problem with it.
Great job already Dhollmen.
Grtz,
John
---------- Post added at 09:40 PM ---------- Previous post was at 08:41 PM ----------
First hickup: YouTube video's won't play
BTW: nice bootlogo. Very smooth and subtile
Grtz,
John
Can't install, Error 7
Hi, great work but after trying several themes they are not working
Error Status7
gucio9377 said:
Can't install, Error 7
Click to expand...
Click to collapse
Please, be advised to change recovery for newest. I've used PhilzTouch6.59 and had not any problem with installation of ROM.
hello,
try many times to download but don't succeed
Up and running. Thank you tux!
Sent from my GT-P5110 using Tapatalk
Update: I have no audio. Viper installed properly but no video or touch or notification sounds on 5110, sorry to report.
Sent from my GT-P5110 using Tapatalk
Error code
Negative results, error code #65537. Unable to flash with latest TWRP 2.8.4.0 - P5110 recovery. Reverting back to: Dhollmen SlimROM based KitKat 4.4.4 - 2015/ 01/ 18. As always, thank you anyway!
Very nice!
I've flashed and tested this ROM for P5100.
Flashing was sucsessfully after CM11 without any problem. Tablet becames quicker and smoother.
Some problems:
1. Phone part does not work. But with SMS is everithing OK!
2. I had failure with disclosure of sattelits on GPS.
So, the Rom is very good! Thank you for great work!
I've flashed too the P5100 ROM
faorekh said:
1. Phone part does not work. But with SMS is everithing OK!
Click to expand...
Click to collapse
indeed, gives fc: com.android.incallui
Messages and USSD messages (like *100#) are working...
Good work:good:, will post back soon with more findings...
Very good rom ,good work, everysing work's great for me, tank you very much.
Sent from my GT-P5100 using XDA Premium HD app
No Sound
Installed twice (5110), no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
John_Br said:
First hickup: YouTube video's won't play
BTW: nice bootlogo. Very smooth and subtile
Grtz,
John
Click to expand...
Click to collapse
wmwamidi said:
Installed twice, no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
Click to expand...
Click to collapse
same for me
Also for me (p5110) no such of sound...all the rest is fine
wmwamidi said:
Installed twice (5110), no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
Click to expand...
Click to collapse
I think this works for now!
Confirmed no sound on 5110. Looks like the audio.primary.default.so file in /system/lib/hw was omitted when compiling for 5110. Just for the heck of it, I downloaded the 5100 build and the .so file was present in that rom. So, I just took the audio.primary.default.so from the 5100 build and put it in the 5110 build, sound working fine now.
I archived the file in the 5110 zip, then flashed the rom but you can also push the file with a root file explorer. Just make sure to set proper permissions and then reboot for it to take effect.
BoroZG said:
I think this works for now!
Confirmed no sound on 5110. Looks like the audio.primary.default.so file in /system/lib/hw was omitted when compiling for 5110. Just for the heck of it, I downloaded the 5100 build and the .so file was present in that rom. So, I just took the audio.primary.default.so from the 5100 build and put it in the 5110 build, sound working fine now.
I archived the file in the 5110 zip, then flashed the rom but you can also push the file with a root file explorer. Just make sure to set proper permissions and then reboot for it to take effect.
Click to expand...
Click to collapse
Yes It works thanks
egystep said:
Yes It works thanks
Click to expand...
Click to collapse
Simple and smooth, it works perfectly only a small problem with the account on the new browser. Very well. Thank You
.
For all those who so kindly have tested this first beta: :good:
I've taken note of all comments and I am reviewing each and every one of them.
when I've prepared the corrections I'll upload a new version.
I'll try the beta status as short as possible.
:highfive:

[Xolo Q3000] [ROM] [4.4.2_KitKat] ANSP_v5 [Android Non Source Project]

On the occasion of my BIRTH DAY, I'm presenting u, my 2nd ported rom ANSP_v5 for Xolo Q3000.
It was already ported to our Xolo Q3K by Vipul Karkar(Hats off for Vipul). But, it has lots of unresolved bugs(as users have mentioned). So, I’m presenting my 2nd ported rom ANSP_v5 for Xolo Q3000. with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) Yavuz21 for the wonderful rom,
3) Dr. Avinash for Boot Logo.
4) Of course, me for Repartitioning Xolo Q3000. But, I need not to Thank myself, as I know, U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but ur work is all credited to you, so, please forgive me.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded anspv5-release-26042015.zip in sd card.
2) Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4) Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5) Install anspv5-release-26042015.zip
6) Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7) Immediately, Install the ANSP_v5_Patch.zip
8) Again, Wipe Cache & Dalvik Cache.
9) Reboot System.
10) 1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo).
WARNING: I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Custom Boot_Logo (Joker)
2) Latest Google Camera
3) ES Explorer as default File Manager
4) Latest Apollo music player
5) Lollipop messaging app
6) Official changelog at: http://forum.xda-developers.com/android/general/android-source-proeject-gm-discovery-t2931201
Bugs:
No major bugs, till now, few minor bugs are as follows:
1) Settings FC at Preferred Networks, APN & Network Operators
2) Report, if you found any.
Notes:
1) For weather settings, you have to set weather widget 1st.
2) For clock in notification bar, change color of clock in settings\ui settings\clock style
3) For Preferred Networks, use Engineer Mode.
Download Links:
1) ANSPv5 Full ROM
2) ANSP_v5_Patch
ALL THE BEST GUYS....
Screenshots:
https://drive.google.com/folderview?id=0B9c3NsdJ2PscUmRrZUkwZWhXZFE&usp=sharing
All the links are updated and working. All the best guys......
Great work
keep it up!!!
avi3230 said:
Great work
keep it up!!!
Click to expand...
Click to collapse
Thanks Bro, we r really missing you. Nice to c u again.
great......
dude....
simply superb....
How to add APN?
How to change DPI ???
Vinay Patani said:
How to add APN?
How to change DPI ???
Click to expand...
Click to collapse
I've already mentioned bugs, I'm trying to resolve bugs, u must wait & if u want to change dpi then use any third party app from play store.
Sent from HM NOTE 1W_MIUI6_5.7.23
sachin.r.fulzele said:
..... to change dpi then use any third party app from play store.....
Click to expand...
Click to collapse
don't know how it's with this rom, but on stock kitkat (rooted), i was able to edit build.prop file in /system.
added the line ro.sf.lcd_density=380 as the last line under ADDITIONAL_BUILD_PROPERTIES and rebooted to get my preferred resolution.
hi @sachin.r.fulzele, i'm an earlier user of xolo q3000. i happened to get back the device for a few days and i'd like to try out your rom.
please mention md5 checksums for your rom zip and patch zip. the rom zip has the following details:
Code:
anspv5-release-26042015.zip
Owner: muratyavuzakarsu
Size: 392 MB
is this the latest release as you intended? also, what exactly is the patch for? thanks in advance for your response.
@mohan, I am speaking frankly that I don't know, how to generate checksum & what is its purpose.
I've referred the link of original thread by @yavuz21, you can check it for latest version.
Patches are always provided, as you know, to suit our needs.
Sent from HM NOTE 1W_MIUI6_5.7.23
sachin.r.fulzele said:
.....how to generate checksum & what is its purpose.
Patches are always provided, as you know, to suit our needs....
Click to expand...
Click to collapse
if you're keen to know, http://bfy.tw/1HZr
nobody would know, unless you post about it.
upload pics
m0han said:
if you're keen to know, http://bfy.tw/1HZr
nobody would know, unless you post about it.
upload pics
Click to expand...
Click to collapse
What is it's use?
Sent from HM NOTE 1W_MIUI6_5.7.23
sachin.r.fulzele said:
What is it's use?
Click to expand...
Click to collapse
the patch? i wanna know too.
m0han said:
the patch? i wanna know too.
Click to expand...
Click to collapse
I've already told, what it is......
Sent from HM NOTE 1W_MIUI6_5.7.23
Hello
Where can we find themes for ANSP 5
Vinay Patani said:
Where can we find themes for ANSP 5
Click to expand...
Click to collapse
I've mentioned origional thread link, you can check it, if there is any progress.......

Categories

Resources