.
Highlights:
Android 5 - Lollipop
Integrates the latest Dhollmen Kernel.
Supports NTFS file system.
Supports EXFAT filesystem.
Supports F2FS filesystem.
Available configuration options for Dhollmen Kernel overclock.
Integration of Viper4 Audio FX as an equalizer, amplifier and sound effects manager.
Supports for Joystick and game controllers.
Supports for gestures on the keyboard.
First Installation:
Download the zip file from Rom as tablet model
Download the add-on with pre-settings Viper4 Convolver IRS
Download the add-on with Google applications (Gapps)
Boot the tablet in recovery mode
Make "wipe data / factory reset" at this time
Install the Rom file
Install the Viper4 IRS file
Install The Gapps file
Reboot
Subsequent installations:
Download the updated zip file
Reboot to recovery mode
Do NOT any kind of "wipes"
Install the updated zip file
Reboot
Information:
Frequently asked questions you must read.
Downloads:
Recovery TWRP
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: Your assumes at your SOLE RESPONSIBILITY all results produced by the "software" and/or instructions in this thread.
XDA:DevDB Information
Dhollmen, ROM for the Samsung Galaxy Tab 2
Contributors
tuxafgmur
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Beta Version: 5.0.2
Beta Release Date: 2015-02-09
Created 2015-02-03
Last Updated 2015-02-15
.
> Rom's Notes.
Who installs this Rom, accept it "as is".
Contains just the apps and options installed.
What you want to add will have to be obtained from Google-Play or any other sources.
Please, don't report bugs if you are not using the installed Dhollmen Kernel.
In case of questions or comments, you must indicate additional apps, tweaks or installed "optimizations".
if you insert images, do it in a 'hide' tag. This hide your image until an user click to show it.
I assume you has installed a suitable Recovery and know how to perform the required steps.
Keep in mind that Antutu and others related apps give you very similar values, regardless of the Rom used.
In such apps, OC influence on speed, but its goal is to evaluate the hardware, not the Rom.
Don't use any kind of overclock before three consecutive stability test in Antutu.
> Rom take a long time to boot after installing.
It is quite normal because ART is used and applications are self-compiled at first boot time, after installing a new Rom.
> Applications are slow to start after installing.
It is quite normal because ART is used and have self-compiled before first use.
Although it may seem at times, the Rom is not hung, just have to wait.
> Get Root access.
In Settings app, entering development option and select Root access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Performance.
> Get Performance access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Development option.
> Google Apps (Gapps).
All Gapps packages available are virtually identical.
Only differ, from each other, in the amount of installed applications.
Never two different packages must be installed as likely to cause Google applications FC.
The Dhollmen Gapps, being valid for any Rom, are specifically adapted for installation on it.
> Viper4 - Convolver - IRS.
This application controls the System Sound FX.
It also includes a number of advanced pre-equalizer settings (made by others) that are the IRS whose installation files requested.
Access to Convolver (manager of the IRS) is obtained by selecting the option Expert in Experience Settings.
Using another equalizer (provided by external applications) usually interfere with it.
You can only have one active equalizer in the system, but if you want to use another one, kindly Viper4 can be turned off.
> Restoring backups.
It is very common Titanium Backup (or similar) problems in Rom.
If backup /data partition are made and, after a change of Rom, restored, usually side effects will occur.
In this directory and subdirectories it contains, there are many configuration files and internal databases.
When it comes to a specific application should not be a problem as long as it is not part of the Rom.
When sub-directories containing settings are restored, the likelihood of problems increases exponentially.
For example, all Roms have a Settings application, but the content of his configurations differs between them and is not interchangeable.
Under no circumstances you should restore /system partition apps.
> Brick Bug.
Don't worry about.
No problems here
> Recovery.
In the wave of failures of equipment, widely discussed and until the problem is completely cleared
The user is strongly advised not to use another recovery than Dhollmen TWRP-2.8.0.5 or Andi TWRP-2.8.0.1
First impressions: very smooth ??
Before I had slimlp. Did a full wipe and factory reset and installed it. No problems at all!
First reboot was much quicker than slimlp.
So far didn't find any problem with it.
Great job already Dhollmen.
Grtz,
John
---------- Post added at 09:40 PM ---------- Previous post was at 08:41 PM ----------
First hickup: YouTube video's won't play
BTW: nice bootlogo. Very smooth and subtile
Grtz,
John
Can't install, Error 7
Hi, great work but after trying several themes they are not working
Error Status7
gucio9377 said:
Can't install, Error 7
Click to expand...
Click to collapse
Please, be advised to change recovery for newest. I've used PhilzTouch6.59 and had not any problem with installation of ROM.
hello,
try many times to download but don't succeed
Up and running. Thank you tux!
Sent from my GT-P5110 using Tapatalk
Update: I have no audio. Viper installed properly but no video or touch or notification sounds on 5110, sorry to report.
Sent from my GT-P5110 using Tapatalk
Error code
Negative results, error code #65537. Unable to flash with latest TWRP 2.8.4.0 - P5110 recovery. Reverting back to: Dhollmen SlimROM based KitKat 4.4.4 - 2015/ 01/ 18. As always, thank you anyway!
Very nice!
I've flashed and tested this ROM for P5100.
Flashing was sucsessfully after CM11 without any problem. Tablet becames quicker and smoother.
Some problems:
1. Phone part does not work. But with SMS is everithing OK!
2. I had failure with disclosure of sattelits on GPS.
So, the Rom is very good! Thank you for great work!
I've flashed too the P5100 ROM
faorekh said:
1. Phone part does not work. But with SMS is everithing OK!
Click to expand...
Click to collapse
indeed, gives fc: com.android.incallui
Messages and USSD messages (like *100#) are working...
Good work:good:, will post back soon with more findings...
Very good rom ,good work, everysing work's great for me, tank you very much.
Sent from my GT-P5100 using XDA Premium HD app
No Sound
Installed twice (5110), no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
John_Br said:
First hickup: YouTube video's won't play
BTW: nice bootlogo. Very smooth and subtile
Grtz,
John
Click to expand...
Click to collapse
wmwamidi said:
Installed twice, no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
Click to expand...
Click to collapse
same for me
Also for me (p5110) no such of sound...all the rest is fine
wmwamidi said:
Installed twice (5110), no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
Click to expand...
Click to collapse
I think this works for now!
Confirmed no sound on 5110. Looks like the audio.primary.default.so file in /system/lib/hw was omitted when compiling for 5110. Just for the heck of it, I downloaded the 5100 build and the .so file was present in that rom. So, I just took the audio.primary.default.so from the 5100 build and put it in the 5110 build, sound working fine now.
I archived the file in the 5110 zip, then flashed the rom but you can also push the file with a root file explorer. Just make sure to set proper permissions and then reboot for it to take effect.
BoroZG said:
I think this works for now!
Confirmed no sound on 5110. Looks like the audio.primary.default.so file in /system/lib/hw was omitted when compiling for 5110. Just for the heck of it, I downloaded the 5100 build and the .so file was present in that rom. So, I just took the audio.primary.default.so from the 5100 build and put it in the 5110 build, sound working fine now.
I archived the file in the 5110 zip, then flashed the rom but you can also push the file with a root file explorer. Just make sure to set proper permissions and then reboot for it to take effect.
Click to expand...
Click to collapse
Yes It works thanks
egystep said:
Yes It works thanks
Click to expand...
Click to collapse
Simple and smooth, it works perfectly only a small problem with the account on the new browser. Very well. Thank You
.
For all those who so kindly have tested this first beta: :good:
I've taken note of all comments and I am reviewing each and every one of them.
when I've prepared the corrections I'll upload a new version.
I'll try the beta status as short as possible.
:highfive:
Related
Unofficial CyanogenMod 10.2 for the Kindle Fire HD 7"
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
BEFORE YOU BEGIN MAKE SURE YOU HAVE A 2ND-BOOTLOADER INSTALLED CORRECTLY AND CAN SEE THE BLUE LOGO DURING BOOTUP:
http://forum.xda-developers.com/showthread.php?t=2128848
NOTE: In this build I do not have the HBOGO or Voice Plus patches yet.
Download Information:
[LATEST][11/15] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: Download (Goo.im)
Mirror 2: Download (Crackflasher)
md5sum: a84b02121236bef1e55fe6afede8f320
[08/12] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/tate/cm10.2/cm-10.2-20130812-UNOFFICIAL-tate.zip
md5sum: c1b26682ef8cc8e0d087e242b74eecbf
[07/31] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/tate/cm10.2/cm-10.2-20130731-UNOFFICIAL-tate.zip
md5sum: 61ecbf61297a4b03a325638a55859398
Older builds can be found in the same folder on goo.im:
http://goo.im/devs/Hashcode/tate/cm10.2/
Download Google Apps:
http://goo.im/devs/Hashcode/gapps
(For Android 4.3)
PLEASE BE SURE TO WIPE SYSTEM & DATA/CACHE (FACTORY RESET) WHEN COMING FROM AMAZON STOCK SOFTWARE.
(It's the "Wipe" button and then "System" and then "Factory Reset" button in TWRP -- this does NOT clear your sdcard space)
Be aware that the "sdcard" space has changed slightly from ICS to JB4.2. You will find your stock amazon OS files in /data/media/ or "sdcard" on the Stock OS. But CM10.1 will create a sub directory "/data/media/0" and call that "sdcard". And in TWRP it will also use "data/media/0" as "sdcard". This has to do with multi-user settings. So when placing files on the "sdcard" be sure to check both locations before wondering why that file is missing.
CHANGES (always includes CM changes):
[11/15] SElinux now included in the kernel and set to permissive. I don't recommend turning it to enforcing as I'm still debugging the "deny" messages.
[08/12] Includes a Trebuchet patch to fix the screen flip-flop when trying to drag an icon in landscape (by XDA user Wickets^)
[08/12] All new "from source" sensor driver
[08/12] Temp. disable light sensor (due to recode of sensor driver)
[07/31] First CM10.2 build
FEATURES / WORKING:
3.0.50 kernel (up from a stock 3.0.8 kernel). This includes updates from Texas Instruments, Google and Kernel.org.
PowerVR Graphics Drivers: DDK [email protected] for Android (Jellybean compatible)
Audio
Camera
Wifi
Bluetooth
Sensors
HWAcceleration
HD Codecs for YouTubeHD and Netflix
HDMI video out is now correct and work across several resolutions. YMMV
DEVS
BUILDING THIS ROM:
First, read through Google's Android website about "how to setup a build environment":
http://source.android.com/source/initializing.html
[ COMING SOON ]
SCREEN SHOTS:
CURRENT KNOWN ISSUES:
When long pressing icons in landscape mode to move them, etc the screen will flip upside down for a moment and right itself. This causes the action to be aborted.
Rotation selection in games is hit and miss. Some work perfectly and some like to flip the device upside down. Still debugging what is causing this.
AUDIO: Any decoder which uses Dolby surround current has a lower volume than the rest of the system (Netflix, Google Movies, etc). It's a WIP.
AUDIO: Headset volume still may be lowish. Testing better ways of increasing volume w/o distortion. It's a WIP.
Sensors: Testing various sensors, gyro seems 90 degrees off, etc.
Holy Crap, this is amazing!!! Thank you, Hashcode!!! The work you put into your devices is 2nd to none!
Thanks Hashcode, great work :good:
i dont understand that thing of bionic libraries, can we take them from galaxy nexus? or it is imposible, i never heard of this before, that´s why i m asking this questions. and there are any important changes of performance in android 4.3 ? send me the build.prop, i m going to remove trim for this version, because android 4.3 has it
Gee wizzz, nice. Thanks a lot HASH:thumbup:
Sent from my Amazon Kindle Fire HD using xda app-developers app
persano said:
i dont understand that thing of bionic libraries, can we take them from galaxy nexus? or it is imposible, i never heard of this before, that´s why i m asking this questions. and there are any important changes of performance in android 4.3 ? send me the build.prop, i m going to remove trim for this version, because android 4.3 has it
Click to expand...
Click to collapse
I'm sure the bionic libs will get optimized for OMAP eventually. The version of Android rolling to the GNex is the same as this.
I would imagine that their performance benchmarks dropped as well.
Any idea why I would be getting "Unable to parse data" errors in Titanium when trying to restore my apps after updating? I made a fresh backup beforehand, updated and now I can't restore... Tried every option I could think of, including setting permissions, etc. and nothing is working.
Sent from my SPH-L710
AthieN said:
Any idea why I would be getting "Unable to parse data" errors in Titanium when trying to restore my apps after updating? I made a fresh backup beforehand, updated and now I can't restore... Tried every option I could think of, including setting permissions, etc. and nothing is working.
Sent from my SPH-L710
Click to expand...
Click to collapse
The old backup was for 4.2.2 apps and the system, the new 4.3 has different data and system info which is incompatible backwards. I'm running PA 4.3 and I get the same message also if you try selecting data only the system presents you with a warning that ROM might become unstable. That's my 2¢.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
south956 said:
The old backup was for 4.2.2 apps and the system, the new 4.3 has different data and system info which is incompatible backwards. I'm running PA 4.3 and I get the same message also if you try selecting data only the system presents you with a warning that ROM might become unstable. That's my 2¢.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Worth upgrading right now from original Hascode release?
I don't really see a difference and benchmarks are low, mine was 8856, also if you have apps that you want to restore with data you won't be able to. I'd stick with 10.1 until more develops for 10.2, but wouldn't hurt to try it yourself.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
Thank you for the work Hashcode! I have a question. Can I directly flash this 4.3 zip package over 4.2.2 without any wiping actions?
Well after I installed this ROM, I've decided to go back to my backup ROM Kinology 7.3.1. Went into recovery TWRP 2.6.0.0 advance wipe, and wiped everything except SD card. Went back and did a restore on my ROM Kinology 7.3.1(took 5-10 minutes), after the 5-10 minutes it said FAIL. This may not have something to do with this ROM, but just wanted to point it out there. If anyone had the same situation and found a fix to it, please help
EDITED: 8/2/13 1:55 AM
Went into TWRP and wipe everything again except SD card, and did a restore and restored like a charm!
You rock Hash ! :highfive:
eridroid said:
Thank you for the work Hashcode! I have a question. Can I directly flash this 4.3 zip package over 4.2.2 without any wiping actions?
Click to expand...
Click to collapse
no no no no no no no no no no
you are asking for trouble
eridroid said:
Thank you for the work Hashcode! I have a question. Can I directly flash this 4.3 zip package over 4.2.2 without any wiping actions?
Click to expand...
Click to collapse
Just wipe cache and dalvik
So far so good, haven't ran into any issues yet, nice to see MX Player updated their app, its my favourite player & it didn't support 4.3 until yesterday.
EDIT: Wait, the new Focal app is always upside down.
Can anyone upload it to another mirror? Goo.im is very slow for me for some reason.
Thank you for this Hashcode. Really appreciate your hard work. Keep 'em coming!
south956 said:
The old backup was for 4.2.2 apps and the system, the new 4.3 has different data and system info which is incompatible backwards. I'm running PA 4.3 and I get the same message also if you try selecting data only the system presents you with a warning that ROM might become unstable. That's my 2¢.
Sent from my Kindle Fire HD 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ahhh... Makes sense I guess. Silly there's no backwards compatibility though... Guess I'll have to revert back for now. I wonder if there'll ever be a way? Hopefully the devs of Titanium will figure it out!
Sent from my SPH-L710
This Rom is based on and derived from SLIMRoms compiled from scratch, looking for maximum performance.
My goal is not only to compile. Is to modify and optimize adding value.
All sources: https://github.com/Dhollmen
Product Highlights:
Android 4.4.4
Compilation with 4.8 toolchain.
Apps and framework generated with Java-7
Integrated last Dhollmen Kernel.
Interface to overclock kernel options.
Management just like FAT32 NTFS without requiring either apps or additional widgets.
Management EXFAT exactly like FAT32 , without requiring either apps or additional widgets.
Management of F2Fs partitions.
IR support (p5113).
Viper4Android AudioFX Effects.
Multiwindow.
PIE controls.
Multiple keys programmable navigation bar.
More ...
This Rom includes Viper4Android AudioFX as equalizer and audio effects controller, credits to ViPER520 and zhuhang.
The Viper4 Add-On includes the IRS-Starter-Pack and very nice presets by BSDgeek_Jake.
Download & installation: Post #2
Some comments about: Post #3
Changelog:
20150618
New interface.
Many modifications in apps.
Includes last kernel release.
Improvements in system base.
20150118
New compilation from scratch.
Includes new kernel release.
Restored 512 MHz Gpu frecuency.
Changes in some blobs.
20150103
New look in the browser, in line with other base apps (contacts, messages, email)
Removes unneded Hal power module.
Reducing camera resources.
Minimal improvements in system base.
Base inline 20150103 - 9
20141214
New system wallpapers
Improved translations
Modifications in some apps.
Improvements in system base.
Base inline 20141214 - 8.20
20141107
Rework SlimLauncher
Many modifications in apps.
More Improvements in system base.
Base inline 20141106 - 8.10
20141028
Includes new SlimLauncher modified by me.
Removes old Trebuchet Launcher.
Restore the ability to slide fingers in keyboard.
Many modifications in apps.
More Improvements in system base.
Base inline 20141027 - 8.8
20141018
Solves encrypted /data issue.
Changes to status bar.
Reduced logs and dropboxes files.
More Improvements.
Base inline 20141017 - 8.6.1
20141013
Solved battery icon when tablet in shutdown loading state.
Added SDcard NTFS and F2FS support
Added SDcard larger than 32 GB (i.e. 64GB) support.
Some more Improvements.
Base inline 20141012 - 8.4
20141009
Pre-release (please, read this post)
.
.
XDA:DevDB Information
Dhollmen, ROM for the Samsung Galaxy Tab 2
Contributors
tuxafgmur
ROM OS Version: 4.4.x KitKat
Based On: Slim Roms
Version Information
Status: Stable
Stable Release Date: 2015-06-18
Created 2014-06-11
Last Updated 2015-06-28
.
Install:
Ensure you have installed a kit-kat recovery.
Download the zip file for your model.
Download the Google Apps.
Download the Viper4Android IRS file.
Reboot into recovery mode.
Imperative to do "wipe data/factory reset" (first time only)
Install the Rom zip file.
Install the Gapps zip file.
Install the Viper4Android IRS zip file.
Updates:
Download the last zip file available.
Reboot into recovery mode.
Install the zip file without doing wipes.
Download:
Rom for GT-P5100 device
Rom for GT-P5110/5113 device
Google Apps (Gapps)
Viper4 Convolver IRS
Recovery TWRP Dhollmen
Keyboard Xperia-TNG
Flash Player Kit-Kat
Dock module activation . . . . . . . (if you own such dock, only)
.
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: Your assumes at your SOLE RESPONSIBILITY & RISK all results produced by the "software" and/or instructions in this thread.
.
> Rom's Notes.
Who installs this Rom, accept it "as is".
Contains just the apps and options installed.
What you want to add will have to be obtained from Google-Play or any other sources.
Please, don't report bugs if you are not using the installed Dhollmen Kernel.
In case of questions or comments, you must indicate additional apps, tweaks or installed "optimizations".
if you insert images, do it in a 'hide' tag. This hide your image until an user click to show it.
I assume you has installed a suitable Recovery and know how to perform the required steps.
Keep in mind that Antutu and others related apps give you very similar values, regardless of the Rom used.
In such apps, OC influence on speed, but its goal is to evaluate the hardware, not the Rom.
Don't use any kind of overclock before three consecutive stability test in Antutu.
> Rom take a long time to boot after installing.
It is quite normal if ART runtime is used as applications are self-compiled at first boot time, after installing a new Rom or changing to ART.
> Applications are slow to start after installing.
It is quite normal if ART is used because apps have self-compiled before first use.
Although it may seem at times, the Rom is not hung, just have to wait.
> Get Root access.
In Settings app, entering development option and select Root access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Performance.
> Get Performance access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Development option.
> Google Apps (Gapps).
All Gapps packages available are virtually identical.
Only differ, from each other, in the amount of installed applications.
Two different packages must be never installed as likely to cause Google applications FC.
The Dhollmen Gapps, being valid for any Rom, are specifically adapted for installation on it.
> Viper4 - Convolver - IRS.
This application controls the System Sound FX.
It also includes a number of advanced pre-equalizer settings (made by others) that are the IRS whose installation files requested.
Access to Convolver (manager of the IRS) is obtained by selecting the option Expert in Experience Settings.
Using another equalizer (provided by external applications) usually interfere with it.
You can only have one active equalizer in the system, but if you want to use another one, kindly Viper4 can be turned off.
> Restoring backups.
It is very common Titanium Backup (or similar) problems in Rom.
If backup /data partition are made and, after a change of Rom, restored, usually side effects will occur.
In this directory and subdirectories it contains, there are many configuration files and internal databases.
When it comes to a specific application should not be a problem as long as it is not part of the Rom.
When sub-directories containing settings are restored, the likelihood of problems increases exponentially.
For example, all Roms have a Settings application, but the content of his configurations differs between them and is not interchangeable.
Under no circumstances you should restore /system partition apps.
Loving this Rom! It's like a super carbon Rom, great work! I like the keyboard, ribbons working for me, everything feels great! The only problem I am having is with IR blaster, doesn't seem to work, but besides from that I am really enjoying this. Thanks!!
Sent from my GT-P5110 using Tapatalk 4
Sounds great ! I'll give it a try!
Are you kidding me lol I was so sad about carbon being left out to dry I just downloaded the new p.a. rom but now I see this! Oh baby given er a go nowish!
Sent from my SGH-I317M using Tapatalk 4
Cool
Looks like a cool rom bu t is there a app that could backup my apps and data/data files so that i can restore them later?
language confusion
tuxafgmur said:
.
As a general rule, there is little text translation faults in the Rom.
Except Carbon Fibers program (Interface) which is only available in English.
I have made the translation into Spanish, but little I can do about other languages.
Click to expand...
Click to collapse
does this mean the only system language is english or
spanish?
so i cant change to other than english or spanish in settings->language and input->language
Tom Mix said:
does this mean the only system language is english or
spanish?
so i cant change to other than english or spanish in settings->language and input->language
Click to expand...
Click to collapse
No, it only concern carbon fibbers( the customization apps from carbon team)
You can choose your language for the rest of the system
Dowloading... Let's try it!
Nexus⁴ / Cataclysm / Franco / Viper4Android
GT-p5110 / Carbón / DhollmenCM / Vper4Android
can i update from cm 4.2.2 without losing app data?
definator said:
can i update from cm 4.2.2 without losing app data?
Click to expand...
Click to collapse
I think you have not problem, but settings is more different from your Rom.
Maybe you can reset data from settings app.
catalinjulia said:
Looks like a cool rom bu t is there a app that could backup my apps and data/data files so that i can restore them later?
Click to expand...
Click to collapse
Maybe you can use some backup program from Google-Play.
Really nice work!!
Nexus 4 / Cataclysm / Franco / V4A
Very gold rom THX
Envoyé depuis mon GT-P5100 en utilisant Tapatalk 4
definator said:
can i update from cm 4.2.2 without losing app data?
Click to expand...
Click to collapse
Get titanium backup, once in 4.3 you may need to correct the backup location of you use the internal default.
---------- Post added at 08:21 PM ---------- Previous post was at 08:12 PM ----------
Tuxafgmur, congratulations on the rom release! I was just looking for a new rom also. The"controversial" release on the previous carbon thread was amazing, I'm sure this rom will be great.
Will this work in the P5113???
definator said:
can i update from cm 4.2.2 without losing app data?
Click to expand...
Click to collapse
The best app (imo) it's nandroid manager, you make a backup just of your data into recovery, then with this app you will be able to restore all app and more. Works great.
ejamin73 said:
Will this work in the P5113???
Click to expand...
Click to collapse
Yes, if a rom works for p5110 it does for p5113
Has anyone tried on the P5100 ? How it works ? :good:
I am currently on Pac-Rom 4.2.2 and it works great so I wonder if it is worth crossing to the carbon? Can you lift the processors clock and what is the native speed of processors?
What is the difference in keyboards : Keyboard Tng 20130928 and Keyboard AOSP 20130928 ? Can anyone upload pictures of them so I can know wich one I like more?
THX !
Hey All,
Thanks for the hard work with this ROM, I would like to try it however I have a totally nOOb Question
The short of it is I acquired a SGT2 10.1, but not sure if it's rooted, booted into ODIN mode and shows count 2 - current is official Samsung 4.0.3 from memory maybe 4.1?
Do I need to root the SGT2 how to confirm if it's already rooted?
When I look at the steps to root the device, it's seems old and outdated as the files recommended have newer versions so it's not clear.
To use this particular ROM, do I need CWM or philz touch, if Philz touch, there lasted is blocked due to violation trying to grab the tar version, yet the zip was ok, however trying to root the device via ODIN 1.8.5 to select PDA philz, can't see the zip as it's expecting .tar
Just want to make sure before I brick this as I am trying to set it up as I've not touch Flashing in ages
Any help would be appreciated
Thanks Team
(UPDATE 02/11/15)Version EMUmIZEROCompleta......full EMUI3 Experience!
For a SUPERLEGGERA (superlight) version of it check this thread: EMUmIZERO SUPERLEGGERA
******************************************************************************************************
INSTALLATION using ROOTJOY:
For the ones who prefer to flash the rom with ROOTJOY:
1: Download the Rom zip and replace " updater-script" inside folder "META-INF\com\google\android" with this one(unzip it before)
...now flash it by selecting the new created zip in rootjoy....that's all my friends...
******************************************************************************************************
INSTALLATION using CUSTOM RECOVERY (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-------------------IMPORTANT STEP----------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
THIS STEP IS VERY IMPORTANT BECAUSE MY TWRP MAKE A BACKUP OF VITAL PARTITIONS WHERE IS STORED IMEI,MAC ETC...
it's a good idea to copy the backup folder on your PC, it could be very useful in future in case of problem with missing IMEI and other trouble...
-------------------IMPORTANT STEP----------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (Without exit from recovery) Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on EMUmI!
******************************************************************************************************
IMPORTANT:
ALWAYS CHECK SERVICE PACKS THREAD and flash the latest one(if present)!
Before asking ALWAYS check TIPS SECTION,probably you will find (probably)a solution.
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS
Screenshots
Some Screenshots:
Service pack
Service pack:
Not needed in Rom UPDATE 02/11/15
ADDONS:
ADDONS:
Here you will find "MODULES" to install and obtain new functions:
For those having troubles with 3G data connection (check the frequencies supported by your mobile operator)(flashable in recovery without wipe):
BASEBANDS(Modem):
900 Mhz Baseband:
800/850/900 Mhz Baseband:
-------------------------------------------------------------------------------------------------------------------------------
EngineeringMode (Extract folder and install like normal apps)
MaxxAudioFx:
http://forum.xda-developers.com/android/general/maxx-audio-effects-mediatek-edition-t3044224
Am3D Zirene Audio Fx:
http://forum.xda-developers.com/android/development/sound-mod-am3d-zirene-audio-fx-t3152714
New Fonts:
http://forum.xda-developers.com/showthread.php?t=3032517
KERNELS:
(1.7Ghz)EMUmI_021105_DefaultKernel.zip (Default one included in rom zip,stablest and battery friendly)
(2.0Ghz)EMUmI_021105_Kernel.zip (Fastest but not underclockable)
All Kernels are flashable in RECOVERY.
CHANGELOG
CHANGELOG:
Installation script modifyed according with new (fixed) recovery....now both are "how they should be!".
Totally rebuild from newest Huawei firmware 268 Version.
Plenty of Optimizations and security Patches,included Stagefright bug
New Music app with Equalizer and full working songs dowload
New Baseband from stock Huawei firmware (better??)
Improved Camera
Improved GPS(agps enabled and editable in location setting).
Improved&Fixed all Sensors(now we have a full working compass!).
Added Compass app.
Re-edited new kernel with fix and optimizations.
Improved stability.
Full DTS Sound included!.
Huawei ID & related apps removed (not need to register to download themes).
Patched Service.jar(you can install engineering apps!..you can find them in ADDONS thread),many tnx to eryen :good:
Adopted some Folder&Files (from Huawei firmware)to menage various startup configurations(power policy,icons,toggles default home screen etc..).
Added "Motion control" in settings.
...probably some other things i don't remember..
Full working in every single function(exept the one mentioned in bugs thread)
.......FULL HUAWEI EMUI EXPERIENCE TRANSPLANTED TO UMI ZERO!.
NEW SECTION ADDED: "ADDONS":Her you will find "MODULES" to install and obtain new functions.
P.S.: Superleggera(Superlight) Version will be uploaded ASAP!
BUGS&TIPS
BUGS:
....probably you will find "G750-T20" or "Huawei" in some places:this is needed for the firmware to working(many libs and function refering to those names)
........
TIPS:
NVRAM WARNING: ERR 0x10 (& random WLAN MAC ADDRESS) ???....HERE THE DEFINITIVE SOLUTION
To download Themes and Songs remember to have simcard inserted and not to be in "Flight Mode":Those apps need to access your IMEI number to finalize autentication..
EMUmI is PREROOTED but there isn't the Supersu apk,all apps needing root will work well,i suggest to install SuperSu(from market) only if you need to manage apps permissions..
The rom is FULLY ODEXED (more stable&fast)....so is not reccomended using Titanium or similar app to remove and then restore apps:It will remove the related libs from system but it will not restore them...so i suggest to use it only if you know what you are doing..(to reinstall an app you need to extract the libs from his .apk and copy them to system/lib again.....)..however you can restore "Only data" of apps without problems.
Many Google related apps are not present(tts,search...)first of all to gain space,second because they are often updated....if you need them you can download from Market without problem..
How To Enable On Screen Soft Buttons:modify this line in build.prop:
#qemu.hw.mainkeys=0
TO
qemu.hw.mainkeys=0
(remember to left an empty line at the end of build.prop!)
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Downloading, gonna test.
I hope huawei and lenovo will bring us more stable firmwares.
Thanks for porting.
Thank you very much for your job!
arna1958 said:
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can:mine is a modded version of it.....
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
River825 said:
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
Click to expand...
Click to collapse
Can you share some pros/cons compared with stock 3.05?
Hi
Rom is multilingual?
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
alvin2014 said:
Hi
Rom is multilingual?
Click to expand...
Click to collapse
Yes it is MultiLanguage...
mightystorm said:
Can you share some pros/cons compared with stock 3.05?
Click to expand...
Click to collapse
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
River825 said:
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
Click to expand...
Click to collapse
Did have you try enabling DTS sound?
kovalski1 said:
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
Click to expand...
Click to collapse
I am also interested in the "double tap to wake" or so called "knock code".
JankyLV said:
I am also interested in the "double tap to wake" or so called "knock code".
Click to expand...
Click to collapse
I think it could be inplemented(lib files are included in system)i'll try....
Good work to continue. Congratulations. You ported the rom from which Huawei model. Thanks.
Sent from my HUAWEI MT7-TL10 using Tapatalk
During the last few months I have been testing several Nougat rom/kernel/modem/su combinations for the hlte N9005 international.
I created this thread to share my setup, hoping it will help others to save the many hours of research, trial, error and frustration I had before reaching the jackpot.
I have 3 hlte phones at my disposal, two myself and one my wife. All three are running trouble free.
By using my setup you will get:
Absolutely no freezes, reboots or FCs
Stable root and Safetynet checks ok
GPS fast and stable fix - average 5 seconds worst 20 seconds
Low battery drain (of course actual drain depends heavily on your apps and usage)
Everything works (AFAIK - you tell me what does not)
Keep in mind my main goal is to provide a stable setup. I will do my best to update this thread regularly, but it is very unlikely I will be using the very latest builds available, mainly because before I adopt a new build it must be thoroughly tested.
If you're interested head to the guide in Post #2
Why Resurrection Remix?
RR has, IMHO, the best combination of features and stability. The RR team has been around for a long time without the ups and downs of other roms. For the Note 3 we are in a very fortunate time, with an official build and many unofficial builds to choose from.
Since RR is based on LineageOS, it is available for most devices. It is very likely when we finally retire our Note 3 and move to another flagship, RR will be there for it.
Why Not Oreo?
Well, thread title says it all.
Credits and Thanks:
@vidwhal for the current RR build
@gj86 for Synergy kernel
@Jairus980 for Xenial kernel
@Hereiwas and @jcadduono for modems and bootloaders
@topjohnwu for Magisk
@stangri and @kantjer for Magisk unofficial daily beta builds
@Deic for the Safetynet fix Magisk module and @NovelliJack for finding the module
@MastahF and all other contributors that made the Open GApps project possible
Special thanks to @tarkzim for the RRN build used in initial setups.
and everyone else I forgot to mention.
>>>>>>> I know - screenshots below are from a previous setup. I will update then sometime in the future.
Rock Stable Setup
Using Resurrection Remix
Revision 11 - 11-Mar-2018
Phase 1 - Prepare for install
Here I am assuming you have a Windows PC. If not you will need to use google search to adapt my instructions to your available OS/hardware. The PC is only required for this phase.
1 - Samsung USB Driver:
Make sure you have the Samsung USB driver installed in your Windows PC.
If not download and install the latest driver:
- SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.65.0.exe
2 - Odin:
If you do not have Odin, get it here, unpack to any folder and create a shortcut pointing to Odin3 v3.09.exe.
There are newer versions of Odin, but they may have issues with our Note 3. Odin v3.09 is the one to use.
3 - TWRP
New to TWRP? Read this guide: TWRP: the complete guide to using Recovery on Android.
If you do not already have it, install TWRP 3.2.1-0. Download it from https://dl.twrp.me/hlte. More info here.
If you no not have TWRP installed download the .tar file and flash with Odin.
If you have an older version download the .img file and use your current TWRP to flash the image into recovery partition.
4 - Update Bootloader and Modem:
You have to install latest Nordic Countries Bootloader and Modem. I have prepared a "tar.md5" with both.
And yes, modem is not country or region dependent. Rest assured Nordic will work no matter where you are.
Get it from here: N9005_Nordic_XXUGPQB1-Modem_XXSGBQD1-Bootloader.tar.md5
Updating bootloader and modem is a must!
If you don't you may get the "SIM Card not detected" error and GPS fix will be slow or not work at all.
There are many sure ways to flash modem and bootloader so that they "stick". What always works for me is:
- Restart into Recovery (TWRP)
- Select Reboot->Power off
- Turn on directly into download mode by holding Down Arrow+Home+Power at the same time
- Connect phone to PC
- Flash with Odin using the AP slot
Now you should check if update was successful. The best way is to install the app Phone INFO, run it and select the Firmware tab. The correct Bootloader and Baseband (modem) above should be displayed. There is a screenshot in first post.
If the update did not work repeat the steps carefully until it does. You may, as a last resort, after powering off remove the battery, wait for about 30 seconds, reinsert the battery and then turn on directly into download mode.
Thanks to @Hereiwas for the files I have used in previous setups. Check out in his thread Bootloader and Baseband for SM-N9005.
If you need more info on flashing modems and bootloaders also take a look at @jcadduono thread [Direct Download] Latest Bootloaders & Modems.
PHASE 2 - Download the necessary installation files
1 - Resurrection Remix Nougat rom - thanks @vidwhal:
Download from here: RR-N-v5.8.5-20180101-hlte-Official-vidwhal.zip.
Please note that I am not the rom builder or developer. All credits go to @vidwhal and the RR Team.
This is the rom thread: [ROM][HLTE][UNOFFICIAL][OMS]Resurrection Remix N.
Please note this build may not be the latest available. The goal here is to have a stable rom that you will be able to use as a daily driver with no issues for a long time. Only after a lot of testing a new build makes into my setup.
I modified the zip to remove Magisk. This will make it easier to use newer or beta Magisk builds if necessary in the future. Remember Safetynet is a cat and mouse game and changes happen fast.
Special thanks to @tarkzim, who produced the RR builds used in earlier setups. He did a fantastic job of producing a very stable build without a Note 3 device for tests. His builds led me to create this thread.
2 - Magisk v16.0 Official - thanks @topjohnwu):
Magisk Installer: Magisk-v16.0.zip
Magisk Manager: MagiskManager-v5.6.1.apk (optional - you might need it in the future)
Magisk Uninstaller: Magisk-uninstaller-20180222.zip (optional - you might need it in the future)
if you decide to use newer builds do it at your own risk. I strongly recommend to keep these.
3 - Gapps:
Open Gapps Pico: open_gapps-arm-7.1-pico-20180311.zip
Not much to say here. Open GApps FTW.
Again the above build is the one I tested. Use this for a failproof installation, but feel free to use a newer build. Usually it will not be a problem.
I prefer Pico Gapps so I have the bare minimum as system apps. And I live by the KISS Principle. All other gapps I need are installed as user apps so I am allowed to use Titanium Backup to backup/restore them with data.
If you would rather use another Gapps package just pick the one you want. All packages should work but the Aroma. Aroma does not work in TWRP 3.
4 - Xenial Kernel - thanks @Jairus980:
Xenial Kernel: [Hlte][Xenial-b26x][02.01.18][N7.1-GSM].zip
Kernel thread: [Kernel][Xenial][Hlte].
With Xenial you have some fixes like the correct charging current in lock screen and working Gravity, Linear acceleration and Orientation sensors. Of course there is a lot more under the hood. If you plan to do some kernel tweaking Xenial offers more options.
If you do flash Xenial kernel do not report any bugs in RR thread. To report a bug you must first go back to stock kernel by dirty flashing RR and Magisk. If you are still able to reproduce the bug then you may post it in RR thread.
Even if there is a newer kernel release, you should keep using the build I posted here to have my tested stable setup.
Special thanks to @gj86 for his Synergy Kernel, used in my previous setup. It is also a great option.
5 - GPS Fix:
In this setup there is no need for a GPS fix. GPS is fast and rock stable as it should always have been.
But you really must update your modem to my recommend Nordic QB1 or GPS will be slow or not work at all.
Do not worry about your current location. The modem will work not matter where you are.
Latest RR builds somehow made GPS fix slower. I checked the gps.conf file and it is exactly the same as in previous builds.
I have my own optimized gps.conf, prepared originally for Marshmallow CM13, with a few more adjustments for Nougat.
After installing my gps.conf in latest RR build, gps fix is back to normal, taking only a few seconds.
I prepared a flashable zip to install my gps.conf. It saves existing gps.conf and put mine in its place.
Download it from here: Fix-GPS-for-hlte-la14.1-based-roms-v1.zip.
PHASE 3 - Backup!!
Now it is time to make backups of your current setup.
Use TWRP to make a nandroid backup. You will need it if something goes wrong. If you are paranoid like me make two and save them on your PC hard drive.
If you use Titanium make also a Titanium full backup. Remember that you should never restore system apps or settings. Use Titanium only to restore user apps and xml backups of wifi passwords, call log and sms messages.
The steps to install the new ROM will not erase your internal storage, but why not make a backup of everything to your PC or an OTG USB Drive.
PHASE 4: Install
- Make sure you have updated TWRP and your bootloader and modem as instructed in phase 1
- Make sure you have all files downloaded from phase 2 in your phone - preferably in external sdcard
- Make sure you have backups!!
- Reboot into Recovery (TWRP)
- Use advanced wipe to wipe System, Data and Cache
- Flash RR-N-v5.8.5-20180101-hlte-Official-vidwhal.zip
- DO NOT WIPE ANYTHING
- Reboot System (be patient - it will take a while, around 3-4 minutes)
- Pick your preferred launcher
- Check Settings->Date & Time and make sure it is ok
- Reboot into Recovery (TWRP)
- Flash [Hlte][Xenial-b26x][02.01.18][N7.1-GSM].zip
- Flash Magisk-v16.0.zip
- Flash open_gapps-arm-7.1-pico-20180311.zip (or the one you prefer)
- DO NOT WIPE ANYTHING
- Reboot System (this time it will be faster)
- Go to Settings->Accounts and add your google account
- Customize your other settings
- Run Magisk Manager and check if SafetyNet passes
- If not disable/reenable "Magisk Hide" option in Magisk Manager Settings and try again
- Restore/install apps/data
- PROFIT!
[Reserved]
wow, nice to see that someone using and "sharing" my builds
but a little tip for you, maybe you can ask me first before you post something are modified from me, no offense and i saw that includes my name on it.
just remind you and i think i will keep building this when i'm free, anyway, thank you for posing this. all good.
EDIT: also i think there is no need for removing magisk separately, it's fine for flashing newer magisk over the older one.
tarkzim said:
wow, nice to see that someone using and "sharing" my builds
but a little tip for you, maybe you can ask me first before you post something are modified from me, no offense and i saw that includes my name on it.
just remind you and i think i will keep building this when i'm free, anyway, thank you for posing this. all good.
EDIT: also i think there is no need for removing magisk separately, it's fine for flashing newer magisk over the older one.
Click to expand...
Click to collapse
Sorry, you are absolutely right.
Thanks for being cool with it.
The main point in changing the rom zip is removing the magisk manager system app. It is a little tricky for noobs to remove the system app to be able to install the v5 beta Magisk Manager.
And thanks again for making your fantastic RR build available.
Thank's for your work. I installed all, but then I had a problem. When I try to open settings/apps, it crashes everytime....
sperug said:
Thank's for your work. I installed all, but then I had a problem. When I try to open settings/apps, it crashes everytime....
Click to expand...
Click to collapse
This does not happen in my phones.
In my work phone I have 600+ apps installed. It takes a while to open but no crashes.
If you post a logcat I may be able to help.
I reinstalled everything, and before made a full wipe, also of the internal storage. And the problem was no more present! Wow! And thank you again...
I checked AFH and have 30+ downloads of installation files.
Any more success or failure cases? Please let me know.
This might be a silly question: You wrote I should download the latest NORDIC COUNTRY Bootloader and Modem.
Is this also correct if im not living in an other region or should I download the one from my Country? Thanks.
BobbyKa said:
This might be a silly question: You wrote I should download the latest NORDIC COUNTRY Bootloader and Modem.
Is this also correct if im not living in an other region or should I download the one from my Country? Thanks.
Click to expand...
Click to collapse
AFAIK it should work for you no matter where you are.
I live in Rio de Janeiro, Brasil and use it.
If it does not work for you just flash another one.
I tried the Nordic ones and everything seems to work. Not a killer but would be great: is there a way to get SPen functions inclidung Air Command? Thanks for the help.
BobbyKa said:
I tried the Nordic ones and everything seems to work. Not a killer but would be great: is there a way to get SPen functions inclidung Air Command? Thanks for the help.
Click to expand...
Click to collapse
To use Sammy Spen apps/features you need a Touchwiz based stock rom.
There are some apps with similar features for AOSP roms.
Many users say the best is SPenCommand developed by @emandt. It is paid but users say that the app is well worth the price.
Check the SPenCommand Google+ Comunity.
Great post. I don't see google assistant working, any clue?
Sent from my Pixel using Tapatalk
---------- Post added at 09:22 PM ---------- Previous post was at 09:10 PM ----------
Please ignore, I installed nano gapps and it worked
Sent from my Pixel using Tapatalk
what about battery life ?
has anyone tried this on Sprint Note 3 sm-n900p ?
svbarbosa said:
Check the SPenCommand Google+ Comunity[/URL].
Click to expand...
Click to collapse
I installed SPenCommand but the App doesn't open. When clicking the Icon nothing happens. Anyone knows about this Problem or knows another app for this?
Beside that everything (incl. Batterylife) seems great on this first day of testing.
I have followed your step to instal, wipe dalvik/art, system, data & chache. Flash ROM then reboot.
I got 'Could not do normal boot'.
Enter TWRP again and instal synergy kernel and reboot, I still got 'Could not do normal boot'.
My phone:
Samsung Galaxy Note 3 SM-N900S (Korea)
TWRP 2.8.7.0 hlteskt
CP N900SKSU0GPC5
BL N900SKSU0GPB1
sent from my Galaxy Note 3 using XDA Labs
BobbyKa said:
I installed SPenCommand but the App doesn't open. When clicking the Icon nothing happens. Anyone knows about this Problem or knows another app for this?
Beside that everything (incl. Batterylife) seems great on this first day of testing.
Click to expand...
Click to collapse
I have never used SPenCommand myself. Just read good things about it many times in other threads. Try to search and get help from people who are using it.
You may also check these apps: Note Buddy (S Pen Helper) and CM S Pen Add-on(ROOT).
And this guide on them: The Ultimate S Pen Customization Tool for Your Galaxy Note 3.
But be advised that I have no experience using these apps. Just found them using google.
opexblue said:
I have followed your step to instal, wipe dalvik/art, system, data & chache. Flash ROM then reboot.
I got 'Could not do normal boot'.
Enter TWRP again and instal synergy kernel and reboot, I still got 'Could not do normal boot'.
My phone:
Samsung Galaxy Note 3 SM-N900S (Korea)
TWRP 2.8.7.0 hlteskt
CP N900SKSU0GPC5
BL N900SKSU0GPB1
sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
Sorry I can not be of help here. I only have the hlte N9005 international Note 3.
Maybe you could replace Synergy RC9 by a kernel that you are sure works with your N900S.
svbarbosa said:
Sorry I can not be of help here. I only have the hlte N9005 international Note 3.
Maybe you could replace Synergy RC9 by a kernel that you are sure works with your N900S.
Click to expand...
Click to collapse
Thank you for fast response. I will try other kernel.
Hello A7600-F Tablet owners, It's been awhile since there has been an updated ROM for this tablet. I have released ported ROMs for this tablet before, however they all had some annoying bugs and many of you reported issues with corrupted SD card partitions. The goal of this ROM is to provide as close to daily driver material for this old tablet as possible.
What better ROM than Resurrection Remix to do the job! :good:
Instructions:
Follow carefully! This process involves going back to STOCK firmware FIRST! This is to ensure your Internal storage gets properly formatted.
SAVE YOUR PERSONAL DATA! (Some where other than your tablet) You will lose it when flashing stock firmware. Don't worry about the struggles of getting ROOT on stock firmware, I have expedited the process greatly.
STEP 1: Get back to stock firmware. THIS STEP ERASES EVERYTHING, so save your data!!! Don't skip this step.
- Get any stock firmware file from here and follow the tutorial also in this link!
- The SP-Flash tool and drivers are all conveniently included with the firmware download.- Don't worry about taking the battery out when the tutorial says to.- If you have issues with the driver provided in the download, try these. (Run dpinst.exe) - Once completed boot into the new firmware just to ensure that you were successful. (Don't worry about going through initial setup we don't need it)
STEP 2: Install TWRP without root. You should now have a stock A7600-F Tablet, lets put TWRP back on.
- We will install TWRP with the same SP-Flash tool so that root is not required.
- Download the SP-Flashable TWRP image and scatter file from here.
- Follow the instructions in the tutorial linked in step 1 again but use the extracted TWRP scatter file you just downloaded instead of the stock firmware scatter file.
- You should only see "RECOVERY" listed in SP Flash Tool instead of all the stock partitions like last time - Once complete unplug the USB and use Vol-UP and Power buttons to get into TWRP
STEP 3: Wiping Instructions. THIS IS IMPORTANT! You should have TWRP installed and running at this point.
- DO NOT WIPE INTERNAL STORAGE! Doing so will cause the Corrupt SD-Card errors!
- Just don't do it! There is never any need to wipe internal storage on most devices.
- Go to Wipe -> Advanced Wipe
- Select only: Dalvik/Art Cache, System, Cache, and Data
- Wipe it.
STEP 4: Installing RR 7.1.2. You should now have an A7600-F with the stock partitions restored, and no ROM installed, sitting in the TWRP main menu.
- ROM Download: here
- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)
- Now simply flash the ROM ZIP followed by the Gapps ZIP.
Reboot and Enjoy!
Things I improved over previous ROM PORTS:
- Better Audio quality
- Smoother Substratum OMS Support
- Camera Fixes
- FM Radio (Headphones only)
Kernel Source: here
Just yesterday I've dusted off this tablet, and so I was browsing the forums to see what rom I can put inside, and lickily, about the same time this thread was created! Installing it right now, gonna post a follow-up once I'm finished tinkering with it.
OK, firstly wanna thank you for this awesome rom, it's stable and fast, no major issue with it. What I did find, however, is that the camera flash is not working along with the night mode which is not turning on. Besides those two issues, everything seems to be in working order
Cheers!
LukaHM said:
OK, firstly wanna thank you for this awesome rom, it's stable and fast, no major issue with it. What I did find, however, is that the camera flash is not working along with the night mode which is not turning on. Besides those two issues, everything seems to be in working order
Cheers!
Click to expand...
Click to collapse
Thanks for the report.
Camera flash? My A7600 Does not have a flash. No actual LED to produce a flash.
As for the Night mode, I have ported a lot of ROMS to this device and I havn't ever seen the night mode work right. If I even do get it to turn on, it lags the whole device.
SaberShip said:
Thanks for the report.
Camera flash? My A7600 Does not have a flash. No actual LED to produce a flash.
As for the Night mode, I have ported a lot of ROMS to this device and I havn't ever seen the night mode work right. If I even do get it to turn on, it lags the whole device.
Click to expand...
Click to collapse
Haha, I've turned the damn thing over, looked at the sensor, and you're right. Havent actually used this device previously to know about it, so glad we have that one sorted out!
Thanks SaberShip. The ROM works great for general use and apps but I'm having an issue downloading files. It says SD card not found Download to default folder. I attempt to download to Downloads folder where it says I have 10.43gb stroage available but it keeps telling me SD card not found. I don't use an SD card for storage on the device. Do I need to use one or can you offer any other advice? I've carefully gone through above installation steps 3 times.
---------- Post added 08-02-2019 at 12:38 AM ---------- Previous post was 07-02-2019 at 11:57 PM ----------
caoiveen said:
Thanks SaberShip. The ROM works great for general use and apps but I'm having an issue downloading files. It says SD card not found Download to default folder. I attempt to download to Downloads folder where it says I have 10.43gb stroage available but it keeps telling me SD card not found. I don't use an SD card for storage on the device. Do I need to use one or can you offer any other advice? I've carefully gone through above installation steps 3 times.
Click to expand...
Click to collapse
So I put in an sd card and I then had option to save to downloads or sd. I still could not select downloads but I could select sd card which is worrying for me now. Thanks again Sabership. Nice work
caoiveen said:
Thanks SaberShip. The ROM works great for general use and apps but I'm having an issue downloading files. It says SD card not found Download to default folder. I attempt to download to Downloads folder where it says I have 10.43gb stroage available but it keeps telling me SD card not found. I don't use an SD card for storage on the device. Do I need to use one or can you offer any other advice? I've carefully gone through above installation steps 3 times.
---------- Post added 08-02-2019 at 12:38 AM ---------- Previous post was 07-02-2019 at 11:57 PM ----------
So I put in an sd card and I then had option to save to downloads or sd. I still could not select downloads but I could select sd card which is worrying for me now. Thanks again Sabership. Nice work
Click to expand...
Click to collapse
What app are you using? I have not seen any issues with downloading yet. If you see 10.43Gb it sounds like your internal storage is formatted correctly. I haven't seen any download issues with Firefox and ES-File Explorer.
Unable to flash firmware - because unable to install Android USB driver on Windows 10
Thank you for the new firmware. However, the instructions to install the Android USB driver in smartphone flash tool (link below) the link below does not work.. There is a signature error and everyone (as per youtube video comments) is having same problem.
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Pls advise.
D2sx34 said:
Thank you for the new firmware. However, the instructions to install the Android USB driver in smartphone flash tool (link below) the link below does not work.. There is a signature error and everyone (as per youtube video comments) is having same problem.
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Pls advise.
Click to expand...
Click to collapse
Main post updated with signed drivers. Please try it now.
Thank you @SaberShip!
The installation of Resurrection Remix 5.8.5 was successful after installing the signed Android USB driver!. System is stable and fast. Thank you again.
App issues:
1. Netflix app (not available on playstore, but at netflix web site) works online, but does not allow video downloads.
Netflix diagnostic error for download is OF.NA.4 -which probably means device does not meet security requirements. ? any workarounds?
// Amazon Prime video works, with offline video downloads as well. Google chrome works. Tried other apps as well.
Documentation issues (minor):
1. "- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)" --> Google Apps Super package did not install since the device ran out of space (error 70). Google Apps "Nano" worked.
System issues:
1. Wifi still does not auto-reconnect after Wireless Access Point is rebooted, but given that this has happened with different ROMs I am concluding it is due to a hardware issue with this device (and not ROM specific).
// Skype camera issue fixed. Camera image is NO longer upside down.
D2sx34 said:
Thank you for the new firmware. However, the instructions to install the Android USB driver in smartphone flash tool (link below) the link below does not work.. There is a signature error and everyone (as per youtube video comments) is having same problem.
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Pls advise.
Click to expand...
Click to collapse
Netflix app not working on ROM due to Widevine DRM
Great job on the ROM!! - it is fast and stable.
I have been investigating why the <latest> Netflix app with offline download capability does not work with Resurrection Remix 5.85 ROM.
I found that some other ROM has similar problem, and it was caused because Widevine DRM was not supported. Netfix (latest app and offline download) started working after Widevine DRM support was added to that ROM.
Is it possible to support Widevine DRM in this ROM?
Here is the quote from another ROM:
"Quote:
Originally Posted by Federek
I recently found out the reason why after opening the Netflix app it shows the error "this app is not compatible with your device". The only workaround right now is to download an old APK directly from Netflix website (it doesn't support the feature of downloading movies). After some digging, I'm pretty sure the error is due to the fact that on, I think any Oreo rom available for bacon, Widevine Drm is not supported (as u can see in the screenshot below). I think it's connected to the files in the screenshot below, but I didn't manage to find a solution. I believe it must be implemented by someone directly in the rom code (I'm absolutely not an expert). I'm also sure it's not connected with root or anything else (the Netflix app is available in the play store for me).
(sorry is my first post)
[/IMG]"
SaberShip said:
Hello A7600-F Tablet owners, It's been awhile since there has been an updated ROM for this tablet. I have released ported ROMs for this tablet before, however they all had some annoying bugs and many of you reported issues with corrupted SD card partitions. The goal of this ROM is to provide as close to daily driver material for this old tablet as possible.
What better ROM than Resurrection Remix to do the job! :good:
Instructions:
Follow carefully! This process involves going back to STOCK firmware FIRST! This is to ensure your Internal storage gets properly formatted.
SAVE YOUR PERSONAL DATA! (Some where other than your tablet) You will lose it when flashing stock firmware. Don't worry about the struggles of getting ROOT on stock firmware, I have expedited the process greatly.
STEP 1: Get back to stock firmware. THIS STEP ERASES EVERYTHING, so save your data!!! Don't skip this step.
- Get any stock firmware file from here and follow the tutorial also in this link!
- The SP-Flash tool and drivers are all conveniently included with the firmware download.
- Don't worry about taking the battery out when the tutorial says to.
- If you have issues with the driver provided in the download, try these. (Run dpinst.exe) - Once completed boot into the new firmware just to ensure that you were successful. (Don't worry about going through initial setup we don't need it)
STEP 2: Install TWRP without root. You should now have a stock A7600-F Tablet, lets put TWRP back on.
- We will install TWRP with the same SP-Flash tool so that root is not required.
- Download the SP-Flashable TWRP image and scatter file from here.
- Follow the instructions in the tutorial linked in step 1 again but use the extracted TWRP scatter file you just downloaded instead of the stock firmware scatter file.
- You should only see "RECOVERY" listed in SP Flash Tool instead of all the stock partitions like last time - Once complete unplug the USB and use Vol-UP and Power buttons to get into TWRP
STEP 3: Wiping Instructions. THIS IS IMPORTANT! You should have TWRP installed and running at this point.
- DO NOT WIPE INTERNAL STORAGE! Doing so will cause the Corrupt SD-Card errors!
- Just don't do it! There is never any need to wipe internal storage on most devices.
- Go to Wipe -> Advanced Wipe
- Select only: Dalvik/Art Cache, System, Cache, and Data
- Wipe it.
STEP 4: Installing RR 7.1.2. You should now have an A7600-F with the stock partitions restored, and no ROM installed, sitting in the TWRP main menu.
- ROM Download: here
- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)
- Now simply flash the ROM ZIP followed by the Gapps ZIP.
Reboot and Enjoy!
Things I improved over previous ROM PORTS:
- Better Audio quality
- Smoother Substratum OMS Support
- Camera Fixes
- FM Radio (Headphones only)
Click to expand...
Click to collapse
SaberShip, thank you for all your work and caring about the A7600-F! Your instructions are clean and elegant. It's great to be able to install your ROM without root. It looks and performs great.
I installed your ROM a week ago. Unfortunately, I've spent much time since then trying to get NordVPN to work. It worked fine on the stock version of my tablet. Now, it connects to NordVPN servers, but fails to adopt the remote IP address (whatismyv6.com reports my ISP IP).
I've exhausted [email protected] I'd be grateful for any pointers you might have.
Hello,
so i will thank Sabership, too, for his new build. I went the way as most builds are normally flashed - reboot from AIM build into TWRP, did a factory reset, and flashed RR and a new GApps build. Everything went fine, i am just typing on it. The bug with WiFi not connecting automatically i am hoping will be gone, it was the only bug i found in AIM for me.
One question: the security patch date is of November 2017. Will there be an update (as asked in AIM, too)?
Regards
jfaheyfan said:
SaberShip, thank you for all your work and caring about the A7600-F! Your instructions are clean and elegant. It's great to be able to install your ROM without root. It looks and performs great.
I installed your ROM a week ago. Unfortunately, I've spent much time since then trying to get NordVPN to work. It worked fine on the stock version of my tablet. Now, it connects to NordVPN servers, but fails to adopt the remote IP address (whatismyv6.com reports my ISP IP).
I've exhausted [email protected]. I'd be grateful for any pointers you might have.
Click to expand...
Click to collapse
I believe VPN connectivity may have been one of the issues with the original ROM even before I ported it to the A7600F. Therefore, there isn't much I can do unfortunately.
If you absolutely need VPN, your options are to use Stock ROM or find a different ROM that has VPN working. Another possible workaround is to setup NordVPN on your router or whatever gateway is between you and the internet: https://support.nordvpn.com/Connectivity/Router/1047409322/Setting-up-a-router-with-NordVPN.htm
Catfish78 said:
Hello,
so i will thank Sabership, too, for his new build. I went the way as most builds are normally flashed - reboot from AIM build into TWRP, did a factory reset, and flashed RR and a new GApps build. Everything went fine, i am just typing on it. The bug with WiFi not connecting automatically i am hoping will be gone, it was the only bug i found in AIM for me.
One question: the security patch date is of November 2017. Will there be an update (as asked in AIM, too)?
Regards
Click to expand...
Click to collapse
I have witnessed wifi disconnection issues on every ROM I've ever ported/used for this device aside from Stock I wish there was more that I could do. As mentioned in the title and before, this ROM is ported from another device. What this means is that I don't have the source code and therefore cannot update things like Android security patch dates. If this were a ROM built from source, I would simply have to sync with updated RR sources to get the new patches and RR bugfixes/features. To do it with a port, I need to find a whole new ROM with the updated sources and then port the whole ROM over to this device again. That is just too much work.
As a side note, I had intended this to be the last ROM I ported for this device due to its age, however If there is enough demand and I can find one, maybe someday I will port a more updated Oreo ROM to this device. Good quality MT6582 Oreo ROMs built from source are still not really common.
SaberShip said:
I believe VPN connectivity may have been one of the issues with the original ROM even before I ported it to the A7600F. Therefore, there isn't much I can do unfortunately.
If you absolutely need VPN, your options are to use Stock ROM or find a different ROM that has VPN working. Another possible workaround is to setup NordVPN on your router or whatever gateway is between you and the internet: https://support.nordvpn.com/Connectivity/Router/1047409322/Setting-up-a-router-with-NordVPN.htm
I have witnessed wifi disconnection issues on every ROM I've ever ported/used for this device aside from Stock I wish there was more that I could do. As mentioned in the title and before, this ROM is ported from another device. What this means is that I don't have the source code and therefore cannot update things like Android security patch dates. If this were a ROM built from source, I would simply have to sync with updated RR sources to get the new patches and RR bugfixes/features. To do it with a port, I need to find a whole new ROM with the updated sources and then port the whole ROM over to this device again. That is just too much work.
As a side note, I had intended this to be the last ROM I ported for this device due to its age, however If there is enough demand and I can find one, maybe someday I will port a more updated Oreo ROM to this device. Good quality MT6582 Oreo ROMs built from source are still not really common.
Click to expand...
Click to collapse
Thanks for your answer. If only i could do something like that of my own... i have so much interests, i don't know if i could learn that in a usefull time!
By the way, why did you call it "old"? i'm using the Galaxy S2 build 2011, with LineageOS 16. I think this is an old device , like my Galaxy Tab 1 and 2.
But anyway, thanks for your work. After some time i'll write again about issues i found, if it will be helpful.
Regards
Thank you, SaberShip. It's been on my list to get a DD-WRT enabled router, so maybe now's the time.
I've had no problems with WiFi.
If you build an updated Oreo ROM, I volunteer to test it. I'm fond of my A7600-F.
SaberShip said:
Hello A7600-F Tablet owners, It's been awhile since there has been an updated ROM for this tablet. I have released ported ROMs for this tablet before, however they all had some annoying bugs and many of you reported issues with corrupted SD card partitions. The goal of this ROM is to provide as close to daily driver material for this old tablet as possible.
What better ROM than Resurrection Remix to do the job! :good:
Instructions:
Follow carefully! This process involves going back to STOCK firmware FIRST! This is to ensure your Internal storage gets properly formatted.
SAVE YOUR PERSONAL DATA! (Some where other than your tablet) You will lose it when flashing stock firmware. Don't worry about the struggles of getting ROOT on stock firmware, I have expedited the process greatly.
STEP 1: Get back to stock firmware. THIS STEP ERASES EVERYTHING, so save your data!!! Don't skip this step.
- Get any stock firmware file from here and follow the tutorial also in this link!
- The SP-Flash tool and drivers are all conveniently included with the firmware download.
- Don't worry about taking the battery out when the tutorial says to.
- If you have issues with the driver provided in the download, try these. (Run dpinst.exe)
- Once completed boot into the new firmware just to ensure that you were successful. (Don't worry about going through initial setup we don't need it)
STEP 2: Install TWRP without root. You should now have a stock A7600-F Tablet, lets put TWRP back on.
- We will install TWRP with the same SP-Flash tool so that root is not required.
- Download the SP-Flashable TWRP image and scatter file from here.
- Follow the instructions in the tutorial linked in step 1 again but use the extracted TWRP scatter file you just downloaded instead of the stock firmware scatter file.
- You should only see "RECOVERY" listed in SP Flash Tool instead of all the stock partitions like last time
- Once complete unplug the USB and use Vol-UP and Power buttons to get into TWRP
STEP 3: Wiping Instructions. THIS IS IMPORTANT! You should have TWRP installed and running at this point.
- DO NOT WIPE INTERNAL STORAGE! Doing so will cause the Corrupt SD-Card errors!
- Just don't do it! There is never any need to wipe internal storage on most devices.
- Go to Wipe -> Advanced Wipe
- Select only: Dalvik/Art Cache, System, Cache, and Data
- Wipe it.
STEP 4: Installing RR 7.1.2. You should now have an A7600-F with the stock partitions restored, and no ROM installed, sitting in the TWRP main menu.
- ROM Download: here
- GAPPS Download: here (Select Arm, 7.1, and whatever size you want)
- Now simply flash the ROM ZIP followed by the Gapps ZIP.
Reboot and Enjoy!
Things I improved over previous ROM PORTS:
- Better Audio quality
- Smoother Substratum OMS Support
- Camera Fixes
- FM Radio (Headphones only)
Click to expand...
Click to collapse
Does usb otg work?
thierry_w said:
Does usb otg work?
Click to expand...
Click to collapse
Just tested, It works perfectly with my USB wireless Keyboard and mouse combo.
When I tried a USB flash drive it did not mount automatically, however "SDA" does appear in the /dev/block/ directory so you can likely mount the flash storage manually with some terminal commands. YMMV
USB OTG works with both my wired and wireless trackballs (Logitech).
I mount/unmount flash drives with StickMount and explore them with Total Commander.
excellent. Works very well