Database Info

[APP] Boot Manager Pro - Dual boot unlimited ROMS! [WIP]

Hola peoples!!! Ok so I just thought I'd create my own thread on this matter. Mustangtim started one in apps and themes (and here is the link to that thread) but since I'm taking over this project it was brought to our attention that this should be in the dev section as its no longer just an app.. I am actually tearing .imgs apart trying to figure out what the deuce.
FIRST OFF THIS IS A WORK IN PROGRESS, WE ARE NOT YET FULLY SUPPORTED. HOWERVER I'M DOING MY BEST TO CHANGE THAT.
Secondly if you want to help get this started please visit the market and grab the app here. Its a $3 dollar app for unlimited amount of roms, based on your SD card storage capacity anyway. And speaking of which you need AT LEAST a class 4 or better SD card to make this run smoothly.
Also feel free to visit the forums at http://forum.init2winitapps.com/
Ok so here it is, Boot Manager Pro. Its been a long time coming for the g2x to dual boot. First off let me say long story short, I currently have a bootable SD Rom, known as ROM1. I have yet to be able to recreate my findings tho. But it works and it doesnt brick at all. However it is a bit laggy on my class 4 SD card. Luckily I've already done my research on this project as there are many threads of such awesome info so I'm just going to be lazy about it and quote the good people of xda versus re-writing it based off of their info.
ChrisDDD said:
So here's a very basic description of how it works... It doesn't partition your SD card, it just creates a folder of its own, and then sub-folders to hold the different roms you install. When you install a rom, it basically creates images of the usual Android partitions - system, data, cache, & boot. These are standard .img files, just like the ones Clockwork creates when you do a backup. After the images are created and wiped (formatted, which you should do initially) it installs your rom into these essentially the same way as Clockwork installs a rom to your phone's actual partitions. I assume it modifies the kernel that comes with each rom to mount the image files on the SD card instead of the phone's partitions.
When you want to boot a rom, it just replaces your current boot image with the modified one and restarts the phone. With the modified boot image, the system, data and cache images on the SD card are mounted to the correct locations and Android starts up none the wiser. The rom will initially run a little slow, because the SD card is slower than the internal memory, but after things get cached it speed up considerably.
When you want to reboot to another rom, or back to the phone's rom, Boot Manager again swaps boot images that mount the desired rom's partitions (in the case of the phone's rom) or files (in the case of an SD card installed rom).
When you first run Boot Manager, it makes a Clockwork flash able backup of your current boot image, which you can flash if a rom hangs or loops on startup. Alternatively, you can also simply boot into recovery and do an advanced restore, choosing just the boot image to restore from a backup. It accomplishes the exact same thing.
It can be a little hit or miss, with some roms just plain refusing to start through Boot Manager, but it does work and when it does, it's pretty amazing given what it's actually doing.
Click to expand...
Click to collapse
So basically upon installing the app you need to setup your phone so that way you can properly install a ROM, follow these steps:
1. Go into the supersu(or superuser app) and then go to settings then disable logging or click none.
2. Then go into the BMP app and press the menu button on your phone, not the app, and go to settings. Once in settings put a check mark in force large boot.img, screen on during install, and then go into variables, leave tegra alone but change the sdcard block to show mmcblk1p1. Then press finish and let the app restart. By the way I didnt change any of the sizes of the .imgs but feel free to do so. But be warned do not decrease the size of the system.img only increase it, if desired.
3.Then after you've done the above you need to setup the phone rom. Click on 'Setup Phone' under phone rom and follow that process to setup your phone rom.
4. Once your phone rom is setup you may begin to install a zip to rom1 or rom2 or whatever slot you want. This is the tricky part. I have done tons of reading and most people say that if your using CWM, which us g2x'ers do, then you will probably have a better chance of getting a bootable rom by restoring from a nandroid backup you did versus installing new.
5. So after you decide which path you will take, nandroid backup or fresh rom install, choose install. If you choose a fresh rom, wipe system, data, and cache right away. If nandroid, then wipe after the install.
6. Now once you have clicked install put your phone down, DONT MESS WITH YOUR PHONE AT ALL! PUT IT DOWN AND WALK AWAY OR SOMETHING! Don’t mess with it, text from it, xda from it, dont even use the screen as a mirror!!!! lol seriously the app is picky and while under the .img creation process you want nothing to mess that up or you will not get it booted. You may however drag down the notifications bar to follow the progress of the install.
7. Once its complete, tap the install complete notification in the notification bar and let the app do its thing to finalize the install and get you back to your rom selection screen. Now if you did a nandroid back up here is where you click 'manage slot' and then factory reset the backup you did. Just do it, dont ask why.
7.1 Also so if you desire to install gapps and/or possibly a different kernel, now would be the time to do so while your here. I have read mixed reviews of doing this process right after the rom installs. However when I set up my rom1, I booted into it first all happily then realized I had no gapps. So I had to reinstall BMP on rom1 then boot back to phone rom and then I installed GB gapps and had no issues booting back into rom1.
8. Once the above steps are done if your feelin lucky go ahead and tap on boot the rom you installed, and if all goes well it will boot up.
9. If it boots up you need to post confirmation here!!! Provided info such as phone rom and the info on the sd rom you used and slot number and such.
Hopefully it will just work for you. I have done all the above steps using HFP 2.1 as my phone rom and only been able to get 1 bootable rom. Being it was for testing I used HFP as my phone rom and as well as my rom1.
So if the above steps dont wortk out for you and your boot lopped or what ever, then turn your phone off and reboot into cwm. You have 2 options to resolve the boot issue you just created. 1, you may go to restore then advanced restore then restore your boot. Or 2. select install a zip and nav to the bootmanager folder then phone rom then flash the update zip there.. then reboot and you should be back at your phone rom.
Here is a basic run down of everything that I have done so far:
When I first started working on this project I wasn’t doing any dev'ing to change any of the stuff in the boot.img. I just changed settings in the app per all the research I did. So when all was said and done I restored HFP 2.1 to ROM1 and it actually booted!! And it works lovely btw.. I can still boot into this rom today. I then decided to pass the word and ways that I created the working rom1, well I nor anyone else I passed the info to was able to get it working. Only one other person was able to confirm that rom1 works but only after I copied all my rom1 info and sent it to him for testing.. and he was able to boot into my created rom1… As I see it, it was a blue moon event that I have yet to repeat. So I thought eff it lets do some dev'in so I unpacked the boot.img from rom1 then compared that to the unpacked boot.img from rom2 that I created in my trial and error experiences. So in doing so I noticed 4 differences; 1, the mount points obviously, 2, in the sbin folder had a ueventd file from the working rom1 was a text file viewable by gedit in ubuntu. In rom2 it was just a non-readable file. 3, in the init.rc file was also missing a chmod command for system, (the command is in rom1 but not rom2) and 4, there was a ueventd.tegra file that was in rom1 that wasn’t in rom2, but everything else is the same. So I decided to plug and play with the differences to see if she boots and no go. I don’t understand why its boot looping because I am using the same rom as phone rom as for rom1 and rom2. So it boot looped. So I had to restore my boot.img many times in cwm.
So then I said eff it lets do some more research, then I noticed in the .zips folder plus the individual rom folder there are .zips that will let you flash via cwm if you get boot loops and 'should' get you booting to your desired sdrom. I then tried that way and no go.. so then I opened up the zip and had a look at the internals.. first there is the moveboot.sh file that the app runs in cwm flash the given boot.img. I then checked out the meta-inf and opened up the updater-script thinking that the app wasn’t actually flashing the boot.img which is why it loops... Well I think im half way right. However the script itself is lil dodgy... first thing I noticed was at the end of the script they have a command to cp the log from /tmp to /sdcard/bootmanager well the command was wrong so it never copied the log. So I fixed that. I also saw that the assert command was pointing to ‘boot’ instead of mmcblk0p5, so I changed that too. Then I decided to do away with the assert command and the moveboot.sh file they have going on to utilize the same functions that the kernel zips use, which is a kernel folder that holds the boot.img and a run_program that dd's the boot.img to 0p5. plus I even updated the update-binary that the file uses. I used the one from the g2x nullifier as I know that one was made for our phone and should have no issues.. plus there was a noticeable difference in the sizes of the provided binary to that replaced binary. So with the updated.zip file I then rebooted into cwm to flash that being that I was using a different command to flash the boot.img as well as the other changed stuff and still it boot looped. So as of now the only thing I don’t think ive done was grab the boot.img from rom1 then change the mount points, only change that, and then use that for rom2 and see if it boots. I don’t think I’ve done that yet. But every dam process I do I get boot loops. So basically I have came to the conclusion that it’s now NOT a boot.img issue being that I have done everything to change the boot.img and to make sure it flashes, which it does indeed and now creates the log too… I think maybe it has issues with the system.img as that’s what comes next in the boot process. But that’s just my hypothesis. I won’t be able to confirm this till I liberate rom1’s boot.img then change the mount points to point to rom2 and then see if it boots.. if it don’t work then that would mean to me that there is an issue with system.img created. But that’s just my hypothesis…
What I don’t understand is why the eff when I didnt hack the app I got a working sd-rom, but when I do change some stuff with it still don’t work!!???!! I guess maybe ill just edit/hack the apk to see what’s up.. This is getting way more complicated than it needs to be, since it worked prior to all my major changes to the script its using for flashing and the boot.img and what not. Anyone have any ideas feel free to add them.
My next steps are to edit rom1 boot.img one last time to change the mount points to point to rom2 and then if that’s a no go then it’s got to be the system.img that’s getting created. By the way this whole process I have only been restoring my nandroid backup for HFP 2.1. I have not attempted to flash new as with thru my research more times than not people would get a bootable rom via restoring versus flashing new.. so if anyone wishes to experience an sd rom let me know, ill send you a link to download my rom1 to get it going. Mind you that its not perfect and you need a class 4 or better sdcard. Everything works but it just takes a bit longer to load things and get things cached as its on the sdcard and not nand. Also if you have any input or are wishing to help pm me I need more heads to get this sorted as I can’t be the only one who knows how to edit scripts and unpack imgs and such. Either way I will continue to do this until I get it right damit!!! Oh and I just ordered a class 10 sdcard to help with this process…
That was copied from the other thread that mustangtim started. Last night when I went home the first thing I did was change the mount points on rom1 to reflect rom2, I changed nada else, then I tried to boot it... it boot looped. So maybe its a permissions issue or the system.img.
So just as a proof of concept and before anyone calls bs on my work/findings Here is the link to my rom1 that boots and is HFP2.1. *Update, 'm just going to
leave it on my DB for now till I find something better I guess. xda wont let me attach the file since its 233MB. Oh well here is the link :
Code:
[URL="http://db.tt/eBZwrOrs"][U][B]Here it is, my Rom1 HFP 2.1[/B][/U][/URL].
I have also attached my updated script file to flash back to rom1, for now.
The boot.img points to rom1 instead of phone rom, ill add to phone rom
as well, just not the now. :) Feel free to flash this via cwm versus
restoring...
Also this is part of the this: the ‘.zips’ folder you need to replace the file in
that folder as well. It’s an update file for rom1 to flash the boot.img.
..
If you’re going to use this you need install a random rom to rom1 then replace those created files in rom1 with these files in the 7z file..
So I am doing this new thread to get the devs or people with know how to help me out with my findings. I have edited the boot.img so much I could pretty much re-write everything in there by now including using magic to create to my own kernel eff!! lol jk but seriously I need people with knowhow to provide confirmation of go or no go. Basically I have people whom have helped out but It seems that I'm the only one who has dug this far into this app(unless i've been misinformed) and I have no one on my level to talk with except the init2winit devs. Which are very helpful btw.
And lastly:
Conap said:
Guys if it's failing to make the boot.img first make sure your using the market version....others have released cracked versions of our app which they broke...if your using the actual market version just send me a pm or email [email protected] and send your log.txt from BootManager folder on sdcard and we'll get it straightened out. Thanks.
Click to expand...
Click to collapse
or post here or PM me, I'm always down to help out.
Also thanks go to the init2win team, Gflam and Conap as they started this app. and as well to Mustangtim as he brought me into the light of BMP.
So you got all that???!!!??? Now lets get this party started and get full support for dual booting. I will not rest until I get this working. Thanks for your time and possible assistance.

Ok so since I have a book above I thought this is a good place for links and such...
So just incase anyone is curious, here is the Official Boot Manager Manual
Here is a nice link for Tips and Tricks while Installing ROM's that so far has good info to help you watch via adb what the BMP is doing in its creation process.
Some FAQs:
When should I set up my phone ROM?
Set up your phone ROM EVERYTIME you install a new ROM to your phone so you can get back to your phone ROM and won't get stuck on your SD ROM.
My SD ROM seems to lag how can I fix this?
SD ROM lagging may be due to a few things which all have easy fixes. First fix is that most of you have class 2 cards which are what usually come with your phones. These have a much lower read/write then cards of a higher class, we recommend a class 6 card or above. Another easy solution is overclocking merely install a better kernel and use CPU Boost (or any other overclock app) to overclock your phone.
Can I nandroid my SD ROM slots?
Yes and no you can't nandroid them in the traditional sense of the word using recovery but this app works as a recovery for your SD ROM slots and you can back up your ROM slots within the app in the Manage Installed ROMs section which works as a nandroid for your slots by fully backing up your slots to your sdcard which can later be restored.
What if I want to change the sizes of my images, how may I determine the individual sizes easily?
Easiest way is to open up terminal emulator in your app drawer. Type 'su', then grant permissions if need be, then type 'df -h' and it will display such information. You may also use adb in the same fashion. Connect via usb, open up command prompt/terminal and get adb connected and then type 'df - h' again and the same info will show. I will say this again just because, do not decrease the size of your system.img ever! Unless you want mad issues!
Here is the changlog link and just for heck of it the info based on that link:
Code:
V3.2.6
Fixed DroidX/Droid2 Install issue
Fixed UI theme issues
Fixed issue with spaces in name of pic when selecting photo for screen shot
V3.2.5
Fix to allow continue of install if no boot.img is found.
V3.2.4
Added support for HTC Rezound
Added support for rom's with multiple boot.img's
Added support for rom's made for multiple phones
AutoDetect sdcard for usb mounting
Fix for installing ICS gapps
Optimized SDRom Install process
Added support for Motorola RAZR
Added install queue
V3.2.3
Fixed issues with rom's not showing when on emmc on Droid Incredible
Fixed issues with not showing correct booted rom in app
More improvements to sms sync(all rom's will need updated app for changes to apply)
Fix issues with loader
Fixed issue with switching to backup server when main server goes down
Fixed 1x1 widget to show unlimited rom slots
Added 2x2 widget that works with unlimited rom slots
V3.2.2
Fixed force close for img's over 1Gb when resizing
Fixed current booted rom displaying correctly on gnex
Fixed issue with wrong busybox downloading on gnex which should fix alot of install/boot issues
V3.2.1
Fix for errors causing installs to fail.
Fix for some of the licensing stuff.
Removed sdbooster prefs from Galaxy Nexus(Since they don't have sdcard).
V3.2
Changed 4 sd slots to infinite slots!
Galaxy Nexus Support
Sms and Call Log synced between ROMs (you choose what ones too also requries updating boot manager in all slots)
License Check extended to a week
ROMs do not need market installed for boot manager to run (requires updating boot manager in all slots)
Hide su toasts (superuser elite only)
Fix for force close when setting screen shot in MIUI rom's
Thunderbolt defaulted to force large boot.img
Fixed unsupported device using a key
Manually setting variables only accepts numbers
V3.1.1
Fix for various force closes in rom installs and Nand restores
V3.1
Added su binary check
User selectable colors for everything
Better navigation (press title for quick action)
Added compatability for new twrp backups
Better compatiblitlity with memory tweak scripts(i.e. supercharger script and liquids default scripts)
Fix for install process being killed by android
Fix for some themes erasing img's
Fix more force closes during install
Force smaller boot.img option in settings(Fix for some phone's who's boot.img won't fit on the phone after BootManager edit's it)
Improved gapps checker
Improved security
Boot Manager now accepts keys pay for by paypal (see http://init2winitapps.com/stories/BootManager.html)
Added Evo 3d GSM Support
Added notifcation sound/vibrate for finished install (turn on in settings)
Improved data check
V3.0.3
Fix some force closes
V3.0.2
Added backup server (Sorry our server dropped out)
Fixed some force closes
2nd init fixes for Liquid's ROMs
V3.0.1
Last minute UI fixes
V3.0
UI Completely redone
Includes screen shot of each slot
Custom Info
Custom Dialogs
Custom Animations
Custom everything!
Bug Fixes
Added Droid 2 Global support
Screen shot with long press of search
V2.2.1
Bug fixes in file browsers
File browsers only show relevent files
Kernel installer fix
Droid 2 bug fix
V2.2
New security (more advanced and requires data only once a day)
Installs no longer require data
Added Italian translation thanks Black-Ice
Droid X support
Droid 2 support
Fixed status bar notifications
Fixed phone rom rebooter if gapps aren't installed
Bug fixes
V2.1
Restore android_secure to sd from nandroids
Added TWRP nandroid support
Added CWM tar nandroid support
Added Spanish translation
Made widgets easier to use
SD Booster added (Change SD read cache for better preformance)
Added current settings to manually set variables.
Added option to keep screen on during install in settings
Fixed usb layout
Updated Security
Bug Fixes
V2.0
Install now runs from the foreground (status bar)
Restore Nandroids to slots also in the foreground
User can cancel installs as they run
4 new themes added including one by apophis9283
Some phones such as tb moved to new install code (Fix for some sense rom's)
V1.3
Added third theme to app (Red Theme)
Added 4x1 widget and new widget styling
Fixed in app messenger
Added support for Htc Evo 3D
Added support for Htc Sensation
Added Support for Htc Incredible 2
Added Support for Htc Incredible S
Added Support for Htc Desire S
Added support for LG Ally
V1.2
Added option to reboot to phone rom to install gapps in license check dialog
Better error checking and error logging
Automatically install's ext2 libs if not present
Moved Set Names to Manage rom's
Fix for add-on's not installing correctly
Better compatiblility for rom's that use data2ext or apps2sd(user must set larger img's in manual variables)
Trash cleaner added to extras
Better Fix for WiFi issues on Droid 1
Added display to show what rom you are booted into
Fix for updater-script not found errors
Added support for Htc NexusOne
Added support for Htc MyTouch4G
More compatiblity for ext4 support
V1.1
Fix WiFi issues on Droid 1
Fix bug in rom installer for setting permissions correctly
Fix bug for cache size not setting correctly in setting variables manually
Fix for decimals entered into partition sizes causing force close
Fix force close in widget
Fix force closes in installer
Added Wipe data/Factory reset to Manage Rom's section
Added code to show what file's are being unzipped in dialog
Added support for rom's that extract files to sdcard so the files actually end up on your sdcard
Added support for Htc Desire (apps2sd and data2sd rom's support is experimental. Please email if you test it and it works/doesn't work)
Added support for Htc Inspire4g
Added support for Htc DesireHD
Added option to use ext4 filesystem if rom's support it-Experimental Won't work with all rom's.
Added log.txt file to sdcard to log errors during install
V1.0
Initial Release

YEZZZ

glad to finally see this here!

jookdakang23 said:
glad to finally see this here!
Click to expand...
Click to collapse
indeed... hopefully it wont be before too long that I get this app fully supported for us!

This app will be extremely useful for G2X owners and makes the G2X more versatile and desirable.

da-pharoah said:
indeed... hopefully it wont be before too long that I get this app fully supported for us!
Click to expand...
Click to collapse
idk how you get it booted. lol i keep getting bootloops

jookdakang23 said:
idk how you get it booted. lol i keep getting bootloops
Click to expand...
Click to collapse
Are you using the files I supplied or the ones that BMP created for you?

Woo hoo good job bud
Sent from my LG-P999 using xda premium

x0xhellx0x said:
Woo hoo good job bud
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
LOL thanks bro.... Go Team Hellfire!!!!

da-pharoah said:
Are you using the files I supplied or the ones that BMP created for you?
Click to expand...
Click to collapse
i remember requesting the files but think you ever sent them

jookdakang23 said:
i remember requesting the files but think you ever sent them
Click to expand...
Click to collapse
no we had a miscommunication due to our avail times and GB's lacking ability to utilize two accounts on gtalk.... I have posted those files in the op however...

First, I want to thank everyone who has helped with us on this app. Second, I know I picked the right man for the job, did you see that OP! All kidding aside, a lot of you know I write for ACS under screen name artifintel. I just had too much on my plate to give this project the attention and direction it needs. The right guy is in charge, he's a stand up person and very knowledgeable with this app. Good luck everyone!
[email protected]

I tried installing CM9, it didnt work, stuck on first boot screen after the LG logo.
I'm using rooted stock 2.3.4

Rafase282 said:
I tried installing CM9, it didnt work, stuck on first boot screen after the LG logo.
I'm using rooted stock 2.3.4
Click to expand...
Click to collapse
what rom are using as phone rom? and you installed to rom1?

da-pharoah said:
what rom are using as phone rom? and you installed to rom1?
Click to expand...
Click to collapse
As phone rom i;m using rooted stock 2.3.4 v21y
The to rom1 I installed CM9 kang from oiwan with gapps and harsh kernel

Rafase282 said:
As phone rom i;m using rooted stock 2.3.4 v21y
The to rom1 I installed CM9 kang from oiwan with gapps and harsh kernel
Click to expand...
Click to collapse
and no bootloop you say?? well then it may be the stock rom your using... The app is very picky and if you get a bootloop, I feel that those can get booted with tweaks... but stuck on lg screen is just no bueno.. Try a different rom... maybe one that has its partitions at ext3 format just to try it.. I think owains rom uses ext4, but I could be wrong. I havent fully researched his rom yet..

hands down, a badass app...

SiL3nTKiLL said:
hands down, a badass app...
Click to expand...
Click to collapse
lol +1 for sure!

da-pharoah said:
I think owains rom uses ext4, but I could be wrong. I havent fully researched his rom yet..
Click to expand...
Click to collapse
positive on ext4

[ROM] Custom Rom For ChaCha - GB

Hello everyone!
Finally, I am satisfied with my chacha. I was constantly shifting between stock custom rom and cm roms. In stock rom everything works but automatic backlight settings are just terrible (especially dim threshold and keyboard light settings) and status bar is bigger than in cm roms (32px vs 25px). Cm roms have all of this but there are other things that still need improvement (front cam, some stability issues etc.). Therefore I decided to create my own mod of stock rom. It is based on Europe RUU 1.3.3 android 2.3.3. I couldn’t find anywhere 2.3.5 Europe rom but to be honest I don’t see any difference between the two. There are two versions:
1. Full sense rom: Link
What is different: rooted, added busybox, support init.d, dta2sd included (you need to partition your sd to ext2 or ext3 after installation and enter dta2sd commands from terminal emulator – google for the commands if you don’t know them), changed the ugly calculator app, added file explorer, added latest play store, Flash player 11 is working. I haven’t removed any apps because in this version I wanted to leave that to the user according to his/her own preferences. Status bar is smaller (more space on the screen) and I themed it a little, removed charging icon (I know that it is charging because phone’s led is orange ). Automatic brightness is tweaked (added lower brightness level, lowered the max brightness of the f button, and added one level for the keyboard lights (sometimes, in stock roms, I couldn’t see my keyboard clearly and the damn lights just wouldn’t turn on so I had to do this tweak as well). And rom is fully deodexed.
2. Stripped rom (no sense): Link
What is different: rooted, added busybox, support init.d, dta2sd included (you need to partition your sd to ext2 or ext3 after installation and enter dta2sd commands from terminal emulator – google for the commands if you don’t know them), changed the ugly calculator app, added file explorer, added latest play store, removed sense, added widget locker, holo launcher, removed a lot of bloatware (at least, bloatware for me), f button is not assigned (I’ll leave that to the user, I use it to turn my screen off but didn’t changed it to this since several people reported issues). Same automatic backlight and status bar tweaks like in the sense rom and it is also deodexed.
3. Stripped rom (odexed): Link
What is different: Same as in stripped rom with the exeption of these: odexed (now 120mb free out of the box), status bar icons have an ICS look and color (wifi, signal, data, bluetooth etc.), notification toggles app added (fully functional and works great, just in the settings set it as an on-going notification and as old in order to be always on top; it has many different icons and styles and colors are changable as well, really nice app), fb button is set to turn screen off, dta2sd not included, different backlight values.
Automatic backlight and status bar tweak for odexed version: Link
Automatic backlight and status bar tweak (sense and stripped deodexed): Link
Flash Player 11: Link
Instructions:
1. Reboot into recovery; wipe data/factory reset; mounts and storage/format system; install from sd card; choose and install your rom; reboot your phone; finish your first boot setup.
2. Reboot into recovery; install from sd card; choose and install backlight.zip; reboot your phone.
3. Install flash player apk; reboot phone.
That’s it. Hope that someone will like it.
Sorry for the poor screenshots.
Regards
P.S. I am not going to support these mods. Everyone is invited to use them and do with them whatever you want. So please don’t ask me does it support this, does it support that, can you do this, can you do that. For me, it is perfect and I don’t need to do or change anything. Everything is working for me. I just wanted to share it with you. I hope that you can understand this.
Edit: I used this guide (thanks kylon) to improve wifi signal range and it worked for me, so I am going to share these settings with you. Mke sure you do this with your WiFi off. Here is what you have to do:
1. Copy your calibration file (found in proc in the root of your phone) to the sd card (it is best to do all steps with root explorer) and download from the attachments framework.jar (here is a link for an odexed version - extract jar and odex files) and symlinkv2.zip.
2. Move the calibration file to system/etc and set permissions as they are set in the screenshot.
3. Reboot into recovery and install symlinkv2.zip.
4. Open calibration file in system/etc (again, best with root explorer) and change this line: rssi_offset=0 into this: rssi_offset=-30
Delete created bak file if you are using root explorer.
5. Copy downloaded framework.jar (I already modified it according to the offset - 30, and if you are using odexed version copy both jar and odex files) to system/framework and set permissions according to the screenshot. Reboot your phone.
6. Done.
This trick did wonders for me and my wifi, hope it will help you as well. If it doesn't, try different values both in calibration file and framework.jar according to the original thread.
Cheers.

Looks noice
Is it faster/smoother than the stock rom? I would go back to the stock rom if it wasn't so hard to configure and it wasn't so damn sluggish compared to CM7/CM9.

ethancottier said:
Looks noice
Is it faster/smoother than the stock rom? I would go back to the stock rom if it wasn't so hard to configure and it wasn't so damn sluggish compared to CM7/CM9.
Click to expand...
Click to collapse
Every rom that I use is fast enough for me. Even the unmodified stock. I just wanted to get rid of some apps that are obsolete for me, and I needed to improve backlight settings because when it is night the original settings don't dim the lights enough which really hurts my eyes and I hate that because I have to manually dim. In this rom I don't have that issue. Lights dim automatically.
Although, I found out today that there is an issue with the dta2sd, or maybe the kernel itself. DTa2sd moves my apps and dalvik to sd-ext, clockworkmod creates a backup of sd-ext in a backup folder, and when I restore it my rom just will not mount my sd-ext on boot after that, thus I need to do a fresh install. I would appreciate if someone has an idea why this happened? It is not an issue for me, since I am going to use this rom for a while, but I would like to fix it for the others. When I don't use dta2sd there are no issues. I looked in init.rc in ramdisk, but couldn't find anything unusual. This happened to me with Void rom as well, so I really don't know where to start regarding this.
Regards
Edit: I have been using recovery for a different phone. I just realized this and now, with the proper recovery, everything is restoring fine.

didije said:
Every rom that I use is fast enough for me. Even the unmodified stock. I just wanted to get rid of some apps that are obsolete for me, and I needed to improve backlight settings because when it is night the original settings don't dim the lights enough which really hurts my eyes and I hate that because I have to manually dim. In this rom I don't have that issue. Lights dim automatically.
Although, I found out today that there is an issue with the dta2sd, or maybe the kernel itself. DTa2sd moves my apps and dalvik to sd-ext, clockworkmod creates a backup of sd-ext in a backup folder, and when I restore it my rom just will not mount my sd-ext on boot after that, thus I need to do a fresh install. I would appreciate if someone has an idea why this happened? It is not an issue for me, since I am going to use this rom for a while, but I would like to fix it for the others. When I don't use dta2sd there are no issues. I looked in init.rc in ramdisk, but couldn't find anything unusual. This happened to me with Void rom as well, so I really don't know where to start regarding this.
Regards
Click to expand...
Click to collapse
I don't know about data2SD, but I use link2SD, and that works perfectly but with the stock rom, you have to format the sd-ext partition in ext2 rather than ext4, and you can't do it with clockworkmod either, cos it doesn't format it properly :/ you have to use a tool like gparted (if you're a linux user) or some windows/mac equivalent to format it properly

Wow that does look pretty nice.thanks man.

ethancottier said:
I don't know about data2SD, but I use link2SD, and that works perfectly but with the stock rom, you have to format the sd-ext partition in ext2 rather than ext4, and you can't do it with clockworkmod either, cos it doesn't format it properly :/ you have to use a tool like gparted (if you're a linux user) or some windows/mac equivalent to format it properly
Click to expand...
Click to collapse
Link2sd works well. Just tested it. Thanks! I don't have the time to look deeper into the issue with dta2sd..

john9 said:
Wow that does look pretty nice.thanks man.
Click to expand...
Click to collapse
Thank you. In a couple of weeks I will tweak the backlight settings little more, and maybe build a similar 2.3.5 rom (if I find a RUU).
Cheers

Stripped with full stock Facebook Button Functionallity
Great work. This is a solid setup. Thanks for the hard work.
I appreciate that you left the F-Button unassigned for the end user, but is there a way to get back to stock functionallity using your Stripped Rom?
Thank you.

maxwellsk said:
Great work. This is a solid setup. Thanks for the hard work.
I appreciate that you left the F-Button unassigned for the end user, but is there a way to get back to stock functionallity using your Stripped Rom?
Thank you.
Click to expand...
Click to collapse
Unzip Stripped Rom, add attached apks to system/app and attached chacha-keypad.kl (unzip the keypad file) to system/usr/keylayout. Zip it and flash it. Let me know if it works.
Cheers.

didije said:
Unzip Stripped Rom, add attached apks to system/app and attached chacha-keypad.kl (unzip the keypad file) to system/user/keylayout. Zip it and flash it. Let me know if it works.
Cheers.
Click to expand...
Click to collapse
Thank you so much for the exceptionally quick response. Unfortunately I ran into an error. Let me walk you through what I did.
1. Dowloaded Sripped Rom, and all the files in the previous post.
2. I unzipped the Rom on my desktop
3. I inserted each of the files in their respective folders
4. Zipped the Rom back up
5. Transferred to SD
6. Booted to Recovery mode and tried to flash.
Here is what I got ....
CWM-based Recovery v5.0.2.7
-- Installing: /sdcard/Stripped-Chacha_1-3-3.zip
Finding update package...
Opening update package...
Installing update ...
Installation aborted.

maxwellsk said:
Thank you so much for the exceptionally quick response. Unfortunately I ran into an error. Let me walk you through what I did.
1. Dowloaded Sripped Rom, and all the files in the previous post.
2. I unzipped the Rom on my desktop
3. I inserted each of the files in their respective folders
4. Zipped the Rom back up
5. Transferred to SD
6. Booted to Recovery mode and tried to flash.
Here is what I got ....
CWM-based Recovery v5.0.2.7
-- Installing: /sdcard/Stripped-Chacha_1-3-3.zip
Finding update package...
Opening update package...
Installing update ...
Installation aborted.
Click to expand...
Click to collapse
That is weird. I just tested it, and it worked for me. Maybe you zipped it with high compression or sth. Try with normal compression. If that doesn't work, I will upload zip for you later today. I use recovery 5.0.2.8, but I don't think that it matters.
Edit: Here is the link - Link

Flash Player Stopping
Stripped down ROM is great - now have more room for downloading apps.
One problem I've come across on this ChaCha is that Flash Player stops working (returns to home screen) after around 2 seconds of playing anything.
Anyone else had a similar problem?

didije said:
That is weird. I just tested it, and it worked for me. Maybe you zipped it with high compression or sth. Try with normal compression. If that doesn't work, I will upload zip for you later today. I use recovery 5.0.2.8, but I don't think that it matters.
Edit: Here is the link - Link
Click to expand...
Click to collapse
That got it! I'm sooooo happy!!! Thanks!! It is perfect!!

maxwellsk said:
That got it! I'm sooooo happy!!! Thanks!! It is perfect!!
Click to expand...
Click to collapse
That's great. Glad I could help.
Regards
scgellion said:
Stripped down ROM is great - now have more room for downloading apps.
One problem I've come across on this ChaCha is that Flash Player stops working (returns to home screen) after around 2 seconds of playing anything.
Anyone else had a similar problem?
Click to expand...
Click to collapse
As you can see from the screenshot below I don't have that issue. Try different flash player for armv6 devices. There are few, just google it.

dta2sd
Little suggestion. If you are planning to use this rom for a longer time, after your setup, copy your data from your sd card to your computer, go into clockworkmod recovery, in advanced options partition your sd card (I set sd-ext to 256, don't need more) and reboot. After that download terminal emulator from play store. In terminal type this:
su (then press enter and allow superuser permissions)
a2sd reinstall (enter and wait for your phone to reboot. It will take some time)
After it is booted enter this:
su (enter)
a2sd cachesd (press enter and wait for your phone to reboot. It will take some time).
The end result you can see in the attached screenshot. After installing all my apps I still have over 120mb free.
Of course, after everything is done copy your data back to sd card.
Regards

Added wifi tweak to the first post. It works for me, hopefully it will work for you as well.
Regards

languages included in europe rom
What languages are included in this ROM?
Thx!

Thanks for this rom, great daily use

Great Rom, Thank you!
This is the best ChaCha rom I have used so far. Everything works great super fast flash even works!
YouTube can play 240p with no lag, any higher and it will.
BBC iplayer crashes but I have yet to find a rom that bbc iplayer will work on when it comes to the ChaCha.

Perfect rom but can u create a RTL fix for arabic support ?
thanks.

[ROM][Umi Zero ] (UPDATE 02/11/15)Arcatarc's "EMUmIZERO"

(UPDATE 02/11/15)Version EMUmIZEROCompleta......full EMUI3 Experience!
For a SUPERLEGGERA (superlight) version of it check this thread: EMUmIZERO SUPERLEGGERA
******************************************************************************************************
INSTALLATION using ROOTJOY:
For the ones who prefer to flash the rom with ROOTJOY:
1: Download the Rom zip and replace " updater-script" inside folder "META-INF\com\google\android" with this one(unzip it before)
...now flash it by selecting the new created zip in rootjoy....that's all my friends...
******************************************************************************************************
INSTALLATION using CUSTOM RECOVERY (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-------------------IMPORTANT STEP----------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
THIS STEP IS VERY IMPORTANT BECAUSE MY TWRP MAKE A BACKUP OF VITAL PARTITIONS WHERE IS STORED IMEI,MAC ETC...
it's a good idea to copy the backup folder on your PC, it could be very useful in future in case of problem with missing IMEI and other trouble...
-------------------IMPORTANT STEP----------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (Without exit from recovery) Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on EMUmI!
******************************************************************************************************
IMPORTANT:
ALWAYS CHECK SERVICE PACKS THREAD and flash the latest one(if present)!
Before asking ALWAYS check TIPS SECTION,probably you will find (probably)a solution.
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS

Screenshots
Some Screenshots:

Service pack
Service pack:
Not needed in Rom UPDATE 02/11/15

ADDONS:
ADDONS:
Here you will find "MODULES" to install and obtain new functions:
For those having troubles with 3G data connection (check the frequencies supported by your mobile operator)(flashable in recovery without wipe):
BASEBANDS(Modem):
900 Mhz Baseband:
800/850/900 Mhz Baseband:
-------------------------------------------------------------------------------------------------------------------------------
EngineeringMode (Extract folder and install like normal apps)
MaxxAudioFx:
http://forum.xda-developers.com/android/general/maxx-audio-effects-mediatek-edition-t3044224
Am3D Zirene Audio Fx:
http://forum.xda-developers.com/android/development/sound-mod-am3d-zirene-audio-fx-t3152714
New Fonts:
http://forum.xda-developers.com/showthread.php?t=3032517
KERNELS:
(1.7Ghz)EMUmI_021105_DefaultKernel.zip (Default one included in rom zip,stablest and battery friendly)
(2.0Ghz)EMUmI_021105_Kernel.zip (Fastest but not underclockable)
All Kernels are flashable in RECOVERY.

CHANGELOG
CHANGELOG:
Installation script modifyed according with new (fixed) recovery....now both are "how they should be!".
Totally rebuild from newest Huawei firmware 268 Version.
Plenty of Optimizations and security Patches,included Stagefright bug
New Music app with Equalizer and full working songs dowload
New Baseband from stock Huawei firmware (better??)
Improved Camera
Improved GPS(agps enabled and editable in location setting).
Improved&Fixed all Sensors(now we have a full working compass!).
Added Compass app.
Re-edited new kernel with fix and optimizations.
Improved stability.
Full DTS Sound included!.
Huawei ID & related apps removed (not need to register to download themes).
Patched Service.jar(you can install engineering apps!..you can find them in ADDONS thread),many tnx to eryen :good:
Adopted some Folder&Files (from Huawei firmware)to menage various startup configurations(power policy,icons,toggles default home screen etc..).
Added "Motion control" in settings.
...probably some other things i don't remember..
Full working in every single function(exept the one mentioned in bugs thread)
.......FULL HUAWEI EMUI EXPERIENCE TRANSPLANTED TO UMI ZERO!.
NEW SECTION ADDED: "ADDONS":Her you will find "MODULES" to install and obtain new functions.
P.S.: Superleggera(Superlight) Version will be uploaded ASAP!

BUGS&TIPS
BUGS:
....probably you will find "G750-T20" or "Huawei" in some places:this is needed for the firmware to working(many libs and function refering to those names)
........
TIPS:
NVRAM WARNING: ERR 0x10 (& random WLAN MAC ADDRESS) ???....HERE THE DEFINITIVE SOLUTION
To download Themes and Songs remember to have simcard inserted and not to be in "Flight Mode":Those apps need to access your IMEI number to finalize autentication..
EMUmI is PREROOTED but there isn't the Supersu apk,all apps needing root will work well,i suggest to install SuperSu(from market) only if you need to manage apps permissions..
The rom is FULLY ODEXED (more stable&fast)....so is not reccomended using Titanium or similar app to remove and then restore apps:It will remove the related libs from system but it will not restore them...so i suggest to use it only if you know what you are doing..(to reinstall an app you need to extract the libs from his .apk and copy them to system/lib again.....)..however you can restore "Only data" of apps without problems.
Many Google related apps are not present(tts,search...)first of all to gain space,second because they are often updated....if you need them you can download from Market without problem..
How To Enable On Screen Soft Buttons:modify this line in build.prop:
#qemu.hw.mainkeys=0
TO
qemu.hw.mainkeys=0
(remember to left an empty line at the end of build.prop!)

First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app

Downloading, gonna test.
I hope huawei and lenovo will bring us more stable firmwares.
Thanks for porting.

Thank you very much for your job!

arna1958 said:
First of all thanks a lot for your job.
Can I update the rom with twrp?
Sent from my UMI ZERO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can:mine is a modded version of it.....

Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:

River825 said:
Thanks a lot for this rom guys, I've just installed it using CWM Recovery and so far it's working fine haven't had any problems :good:
Click to expand...
Click to collapse
Can you share some pros/cons compared with stock 3.05?

Hi
Rom is multilingual?

Does this ROM supports double tap to wake ? Are there ang chance that photos are better?

alvin2014 said:
Hi
Rom is multilingual?
Click to expand...
Click to collapse
Yes it is MultiLanguage...

mightystorm said:
Can you share some pros/cons compared with stock 3.05?
Click to expand...
Click to collapse
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet

River825 said:
I've only been using it for 30 minuets
the camera seems slightly better although i haven't tested it in the dark yet
i haven't had any random reboots
headphones work fine
I haven't found anything wrong with it yet
Click to expand...
Click to collapse
Did have you try enabling DTS sound?

kovalski1 said:
Does this ROM supports double tap to wake ? Are there ang chance that photos are better?
Click to expand...
Click to collapse
I am also interested in the "double tap to wake" or so called "knock code".

JankyLV said:
I am also interested in the "double tap to wake" or so called "knock code".
Click to expand...
Click to collapse
I think it could be inplemented(lib files are included in system)i'll try....

Good work to continue. Congratulations. You ported the rom from which Huawei model. Thanks.
Sent from my HUAWEI MT7-TL10 using Tapatalk

Customized version of the ROM B370 Kit Kat for Huawei Ascend G6-L11

05-03-2016
Hi!
This is the ROM i have in my phone, it was changed by me and for now everything is working fine.
If you want default version go here :
>>>DEFAULT TUTORIAL:
If you want the default tutorial look here: https://www.facebook.com/Huawei.Ascend.G6.L11.Kit.kat.B370/posts/1427876034188089.
My version still Kit kat B370 but edited by me, is a backup from my phone.
Please read all to understand and see what you need to do and how to do it.
>>>>>This Rom have:
-Custom bootanimation
- One Hand UI ( helps to write in keyboard with one hand, you can find in shortcuts bar )
- Root
- Root tools (Root Browser, ES File Explorer, build.prop editor, etc...)
-Same cosmetic changes ( battery icon, signal reciver and wifi icons edited)
- sound is fixed ( distortion in ring and music )
-Swap
- Governor set to performance
-Low cpu frequencie set to minimum ( 300000 )
- RAM tweaks
- Entropy tweaked ( https://en.wikipedia.org/wiki/Entropy_(computing) )
-Google Play updated
-Huawei backup app update
-Huawei File manager Update
-Only basic Google apps
-The Icons order was changed
-P8 Theme manager
And same other things...
For me, is my best version!
I hope you enjoy it.
ADVISE!
Always do backup from the ROM you have in your device.
If you have root you can use this tool, it do a backup option.
G6Sknife for windows OS
https://mega.nz/#!WgoVWLjQ
Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI
My device is working properly without any problem so far, some times bugs only be noticed with use and i will update this post with the ROM fixed.
Install it by your own free will, I am not responsible for any damage that may appear in the device.
This is a European ROM but, like the default one, there are same country restrictions in providers that may affect the 4G reception, etc, etc.
If you want to install, you can try to unlock these restrictions since the ROM has root.
>>>>> FIX CUST, CHANGE PROVIDER AFTER INSTALL ROM
This ROM was edited to vodafone pt but can be changed to your provider.
When you flash it, if you are not from Portuguese Vodafone it will show a bootanimation that say " Change Cust after settings than do a factory reset ".
This is how to fix it with Root Browser, that you can find in ROM, go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as example zt/rt, now we left the folder /DATA and go to the folder /CUST , we open it and we will find a folder with the name vodafone, we will change the name of it to the first name that we saw in custom.bin in our example will is zt, use small font, now we entered the zt folder and we will find another folder that his name is pt, let's switch to the second name of our exemple which will be rt, use small font!
Go back and exit the app, do a factory reset. Done!
.
.
>>>HOW TO INSTALL ROM.
Do backup from your data with the default backup app from the phone, and you can do to a backup with TWRP from your ROM.
->You need bootloader unlocked, search in this page to how to do it ( http://forum.xda-developers.com/ascend-g6/general/huawei-ascend-g4-4g-l-11-instant-t3190617/page2 ) , and need TWRP recovery FROM THIS POST, to install TWRP boot in bootloader ( fastboot - turn off the phone, press vol - and power, release power on boot than vol when you see the fastboot screen, must say in red unlocked) and execute this file to install TWRP recovery:
TWRP2d.exe
https://mega.nz/#!T9pygRAC
KEY:
!qVujE5A7RrQeQ1dqFFuRGYtUvBLWo-PfrEAGr6QoGsI
To install ROM, copy the zip file bellow ( ROM ) to sd card, turn off the phone, press vol + and power at same time, release the power on boot than vol + when you see the blue screen from TWRP, go to install and search for the zip, than swipe to install! Done. The ROM will install the default recovery again, if you want to stay with TWRP you must flash it again.
----->Before ROM flash, IF YOU WANT to win 2205MB more for apps and user data flash this zip file with TWRP like it was a ROM, you can read the steps in the end of flash, but i will write bellow. For you understand when you see "Insufficient storage available" is not the storage where music or pictures go, that is like a sdcard, is data partition storage. What this zip do? This will take from that storage where music and pictures go to give to data partition storage. Why this is good? Every one have a external sd card for pictures and music, i think and this will let to to install more apps in phone!!!
ADVISE: This do a factory reset!!
https://mega.nz/#!OgRzmDiK
KEY:
!zPrLPGzJPQOM1eTxX_L3SX1qiUyCs7ewkx-Fz77yM3U
->After zip Flash DON´T GO OUT FROM TWRP!
Go to main menu -> WIPE ->Advanced Wipe ->Select data -> go to repair or change file system -> change file system ->EXT4 Swipe to Change -> Now you can reboot.
.
-> My ROM have a swap ON ( https://en.wikipedia.org/wiki/Paging#SWAP-SPACE ).
Now the ROM!
06-03-2016!
Basic_B370_ROM_06032016.zip
https://mega.nz/#!T0gBQZob
KEY:
!JK4vluqbbHunMX4543BdVlWV-MQNwfRJmvSHianNql8
Note:
This "MAYBE" works in same L22, L33 but not dual SIM. Only testing you can know it. The Only issue for sure that will be is the home key but can be fix it with a simple app from google play.
You can try to use this app with this ROM, for now, if you want it.
Notes:
Tap Tap App is to use light sensor to unlock the phone, open Tap Tap app, Install, go to setup sensor, select "Unlock when removing the cover", unselect "Tap Tap unlocks the screen" ( G6 don´t have this option in kernel).
Busybox, is a tool to install several Linux tools to use with Android, like cmd in Windows... if i can say like this... You can use them with terminal emulator.
GPS Status helps with GPS, it gets faster, better if data is ON.
>>>Multi-action Home Button<<<
https://play.google.com/store/apps/details?id=com.home.button.bottom
https://youtu.be/gv2bEPloL6Y

G6_L11 problem after update...
Hello...
I have a G6-L11, Digitel Venezuela ...
Since I did ROM upgrade, the gyroscope and proximity sensors do not work, either lighting and ...
What can I do..??

Hí, this is a great rom so far, thanks.
Only couple glitches came out for me so far, can be my mistake tho, been a pain ita too root in the first place.
Homescreen organizing resets sometimes after closing an app,
There are some wifi networks i cant connect, although others working perfectly.

Latest update of this rom is really nice, and it fixed the annoying media player bug on G6-L11.

There is a new update in the Facebook page.

persona78 said:
There is a new update in the Facebook page.
Click to expand...
Click to collapse
Hello,
I'm very interrested in using this rom but the link for downloading the rom itslef is not working (It says, file had been removed.... Other links are fine)
Can you please post a new link for this rom?
Many thanks in advance.

pierrottls31 said:
Hello,
I'm very interrested in using this rom but the link for downloading the rom itslef is not working (It says, file had been removed.... Other links are fine)
Can you please post a new link for this rom?
Many thanks in advance.
Click to expand...
Click to collapse
Check this one
https://www.facebook.com/story.php?story_fbid=1548800932095598&id=1427869617522064

persona78 said:
Check this one
https://www.facebook.com/story.php?story_fbid=1548800932095598&id=1427869617522064
Click to expand...
Click to collapse
Thank you, it s already installed, you did a good job, this is one of the best ROM I have used for my G535.
THanks again
Regards.

Hello,
I am really interesting in changing the ROM of my G6-4G-L11. I began to see your video https://www.youtube.com/watch?v=SMDnP1tBsJ4&feature=youtu.be (what a shame there is no more sound!) as some things to do is not so easy to understand for me...
I have read all the topic above and you tell " Always do backup from the ROM you have in your device". I have no root access but I will try to have it with Kingo Android, is it a good option? After that, I would use your G6knife tool. I would try to follow all the steps you describe to change the ROM but I am really afraid! In case of problem, is it possible to return to the origianl ROM?
Thanks a lot

Can you please update download link for custom ROM. I have Ascend G6 l11 LTE and really want to try this. Im from Croatia, will it work for me?

[Rom]HTC BOLT/Stock-Ish/Debloated/Magisk/Updated 8-19-17

DEV DIGITEL PRESENTS
Stock 7.0 Magisk Debloated/Deodexed + Mods
Whats Included:
Magisk Version 13.xx <- Passes Safety-net As of 8/19/17
BusyBox Pre-built into system + Magisk Module
3minit Clock / 3minit Battery @OvrDriVE For spending the time to get the SystemUI Corrected!
Stock Htc Apps From HTC U11 : Gallery, Music, MMS, Htc Sense Home, Htc weather, Htc Clock , Internet, Camera
Shortcutter App Added - For endless quick tiles
SystemUI Tuner - Made by Local XDA Dev Zach
Hotspot Mod
****Many other tweaks etc, all Gplay apps and things that can be dl from google play were removed****
Before we move any further lets get this outta the way, I AM NOT LIABLE FOR WHAT MAY HAPPEN TO YOUR DEVICE, You remove my liability by proceeding any further and downloading / installing any software or mod developed by @Team DevDigitel. Worst Case, RUU back to stock and try again!
So 1st, always make a backup and be prepared to restore your device and possibly brick it. I am not liable for your device or the effects of this software, please use at your own risk. And feel free to report bugs and submit feedback as well as help resolve some issues we are working on!
STEPS
1) Unlock Bootloader - Go to HTC DEV SITE AND FOLLOW STEPS AND RETURN HERE ONCE UNLOCKED
2.) Flash the TWRP RECOVERY.img
Using fastboot while in bootloader mode
use command: "recovery.img is name of twrp recovery or rename to match"
Fastboot flash recovery recovery.img
3.) Make sure your using the newset twrp. No longer encryption issues!
4.) Go now to install in twrp and choose the rom.zip you downloaded and flash it to the device. After flash completes you need to reboot device and allow the 1st boot to complete. Due to being deodexed and 1st boot, this will take 5 - 10 minutes to complete just wait!
5.) Reboot and Enjoy and, Also dont forget to hit the Thanks button !!
ROM Downloads:​
Revision 3 : DevDigitel_1.32.651.6_7.0R3
https://www.androidfilehost.com/?fid=817550096634793725
Twrp Recovery :
http://forum.xda-developers.com/bolt/development/recovery-twrp-touch-recovery-t3519304
This was built using the stock image that comes pre-loaded to the HTC BOLT
This was rebased; The Updated Rom is Based off Stock Version 1.32.651.6 De-odexed by Bad Boys Team
@OMJ Thank you for providing the necessary files and de-odexing for this base!
The device must be bootloader unlocked and TWRP recovery used to flash.
S-OFF is not required but recommended ( No radio included with this rom)
RUU to latest version 1st to obtain latest radios without S-OFF
Please do not redistribute my work without giving proper credits to all involved as well as asking permission to host such work 1st! Thanks!
Contributors:
@OMJ - General Help + Newest Base for Rom.
@OvrDriVE - Smali / xml files related to SystemUI mods / General Support
@topjohnwu - magisk
@Captain_Throwback -twrp , root
@Chainfire - root[/CENTER]

Reserved

Reserved

Is this build of TWRP fully working? I only ask because the other 2 builds up until now have had certain things broken...

bdizzle1686 said:
Is this build of TWRP fully working? I only ask because the other 2 builds up until now have had certain things broken...
Click to expand...
Click to collapse
This twrp does not decrypt htc encryption still.
while using the decrypted boot.img it can access all features
backup/restore etc.
using on a encrypted storage will not work still. atleast until captain throwback comes back with the correct mods needed.

New link is up, located a few issues and removed them.
Boot.img was being pre-rooted and was causing a hang, no longer a issue.
The setup wizard has been removed, the default homescreen was cleaned, almost all bs apps are gone, ill update with a newer version here soon.
Just need to flash the su zip after first boot, the fingerprint and service issues shouldnt be present in this build anymore.

old system size was well over 12gb. Now it's at a healthy 8gb debloated.. What a difference.

delete please

Is hot-spot unlocked?

Revived for any Htc bolt users out there, ill update some good screenshots here in a few!!
Hope this helps someone out!! Hit the Thanks on OP if it did!!

Screenshots added to the Post / Pay attention to status bar, I made sure to include some with 3Minit battery options and different locations.
Re-uploading Rom with some apps moved to User-data instead of System/App; Cleaning up scripts and removing dead directories.

htc themes account
htc themes account not working..not updating either not installing after 19/8/17 update

How can i deal with the problem of getting hot on my phone?:crying:htc 10 evo

stream1027 said:
How can i deal with the problem of getting hot on my phone?:crying:htc 10 evo
Click to expand...
Click to collapse
a lot of it has to do with the design of the phone being its metal. Unfortunately its not something im able to deture much. You could reduce temps some by under-clocking the processor or reducing the amount of use the processor is going through, kernel auditor or similar apps give you the ability to scale back the cpu, but you will take a performance hit doing so. A case at least removes some of the heat transfer to your hands but inst much of a "fix"

does this rom have radio

adnanagha said:
htc themes account not working..not updating either not installing after 19/8/17 update
Click to expand...
Click to collapse
has there been a fix for this i am having the same problem

also have been having trouble with certain apps crashing on my htc bolt

Can I use hot-spot freely with this?
Sent from my 2PYB2 using Tapatalk

This rom has band 8 activated?

this rom work on htc 10 evo ??