Okay I have no idea and need a little help. I'm using a 2013 Google Nexus razor as a in dash car project. I have it running a USB Reverse camera, USB radio,USB HDD and USB GPS. I stumbled upon 'You are Here GPS' in the app store and when my USB device is the only one plugged in it works well on HEMA maps. When my other devices plug in via a powered USB Hub it goes awry. My though is it has no way of selecting the correct USB device when there is more than one. If anyone can help by making a code to fix this modify the app or tell me what I can do to fix it will be greatly appreciated.
JOSH
bump
Related
I don't know why, but ever since i got my USB keyboard.
when i plug my phone in to active sync my keyboard and mouse acts up.
it's like it turns it self on and off.
i type or move for 5 seconds then it stops.
it also seems like it seems to be moving between windows?
like and alt-tab kinda thing.
cuz the IE window would got active and unactive.
am i making any sense?
does anyone else have this problem?
thanks!
bump, please help.
Active synce used to work great on PC but now it's acting up.
I recently replaced my KVM switch with a USB one, so i can use my USB keyboard and wireless mouse.
but ever since I did this, when i plug my phone in to active sync my keyboard acts up.
it's like it turns it self on and off.
for example, I'm chatting with someone, i type for 5 seconds then it stops, and i have to click on the window again.
am i making any sense?
does anyone else have this problem?
the PCI usb port has 4 ports, on it, it has an external 4 port USB hub, 1 usb cable that i use to plug my phone in to sync or d/l pics from my camera, and one port for the KVM switch. could it be my USB port is overloaded?
So i decieded to plug my phone into a USB port on the motherboard. the same problem happens!
so does it rule out my PCI usb ports were over loaded?
I also tried just leaving in the KVM and plugging in the phone. the samething happens!
does anyone know what could be causing this? I installed and reinstalled active sync many times.
Please help me!
hmmm !strange behavior,I'm using both a usb Logitech wireless keyboard and a usb cordless Logitech MX 1000 Laser Mouse.I have also got a separate usb cable attached for my phone,which I use very regularly,but have never had any sort of problem.
Although, I have eight usb ports on my PC,I have plugged each to a separate usb port,well as there are some usb ports in your PC which are cable to work as usb2 while are cable only usb1 data transfer.Checkout and try to connect to ports with usb 2 data transfer capable,check if it works.
secondly,disable 'connection through usb' option in the Activesync and connect the phone with the pc via usb cable and check or there's another option in the Activesync to enable connection through network connectivity or something,as I don't have the Activesync installed in my PC at present ,I can't tell you about it at present.
thirdly,which windows are you using ? if you are using winxp than upgrade to sp2 ,it'll upgrade your usb drivers automatically or download usb update drivers from Microsft site and update your usb drivers,hope it'll solve this problem.
Cheers
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Ray_jai said:
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Click to expand...
Click to collapse
This option enable network connections or somthing is available in the settings option of the Activesync.Right click the small icon in the Task bar of Activesync near the clock icon and you'll get the settings option,check out if this helps,good luck
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Ray_jai said:
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Click to expand...
Click to collapse
Glade you got it worked out,no I'm not using Setpoint,
Cheers
I just got a 2010 Infiniti G37. It has a USB port, but no aux input and no Bluetooth audio streaming (wtf Infiniti?). It reads and plays iPods and iPhones just fine. I can not get it to recognize my android phone at all (Motorola triumph running stock 2.2 rooted). It will recognize flash drives though. I think the problem with the phone is it takes a few seconds to click 'connect USB storage' and then 'ok' before it reports itself as a mass storage device. By that time the car is already reporting an error. I have tried with debugging on and off... Makes no difference. So, is there any tweak, app, or hack I can do to force my phone into USB mode (without the prompts) every time I connect it?
This is actually a pretty important feature to me and I'm disappointed I can't get my phone and new car to play nice. Might even consider switching to an iPhone if there is no other option. Please help.
Thanks.
the MIUI rom im running has an option to auto mount when plugged in to a usb port. hope that helps
I have a 2.2.1 (rooted) Mesmerize and I can't get it to recognize anything plugged into the Samsung Micro USB to USB Adapter I just bought.
The phone is set to "Mass Storage" for USB and I've tried both USB Debugging on and off.
I can't get it to recognize any of 5 thumb drives that I've tried connecting to it. So either it's a bad cable, or something else in the phone is preventing the connection. Help, please!
EDIT: I'm possibly naive in assuming that this (reading a USB thumb drive from the phone) will work at all, but since they (Samsung) sell the cable and tout it as being capable of it, I must just be missing something such as a setting or the necessary version of Android or a wonderful hack from this group.
good day to everyone. firstly, i would like to thank you for having the time to read my post.
well basically heres my inquiry, my unit is the alcatel tab t10. i never had any problems with it until recently, my device's usb port suddenly stops working.
tried unchecking the usb debug mode, tried checking it but to no avail, the usb still does not work. it doesnt seem to connect to my laptop. tried changing the cable.
i also tried connecting my device to my brothers laptop.
correct me if im wrong, but when the usb fails to connect to any laptop, their should be a notification in the laptop that the device is not recognized. but in my condition, no notification shows up. its like my device does not really connect at all.
oh and if it helps, i bought an otg cable before it started malfunctioning. but the only thing i had conneceted to my device is a wired mouse and a wired generic gamepad, which both seems to be working perfectly fine.
also, if i connect my device to a wired mouse, it would work perfecly fine. i could also connect to a usb flash drive, that is via the otg cable.
so whats weird is that the usb cable does not work, but the otg cable works fine.
if you have any question or any suggestion , i would truly appreciate it.
Hmm.....well the good thing is the port itself isn't "dead" as you can still utilize it for OTG. My only suggestion is make a backup of all your apps and data and try a factory reset.
Sent from my SCH-R880 using xda app-developers app
thank you for the suggestion guitarman2010. unfortunately my usb port isnt still working. i also reflashed my device's current firware. but still wasnt the solution i was looking for. i was just wondering if there is a directory under the root folder that holds the devices usb driver? would it be possible that the device's driver itself got deleted? i wam still at awe that the otg cable still works like a charm.
and another thing, is the male usb pin the same with the flash drive's pin? cause if i connect the usb cable to the otg cable it wont work, but the flash drive works normally.
sorry for the amount of question im posting
thank you very much for the suggestion. especially when u told me that the port itself wsnt dead. i can now breathe easier..
and future suggestion and advice would be appreciated.
do you guys know how to access the phoneutil in tablet? maybe i should change the usb option to pda? but i heard that its only applicable to samsung 4.0.3 devices? suggestions are appreciated.
Hi new here,i have the mad catz m.o.j.o and i am trying a brand new and working powered usb hub.But after it initialy detected it 1st time it now refuses to work with the m.o.j.o and on occasion it does but it then pretty quickly stops working again,any ideas what is causing it guys?
The usb debugging isn't causing it either as have disabled and enabled again as it is behaving the same either way,it's a simple generic ebay 7 port powered usb hub. All i would be happy with is getting the keyboard and mouse and my usb sd card reader working all from the hub.
Any help would be greatfully appreciated,and thanks in advance
OUYA MODDER said:
Hi new here,i have the mad catz m.o.j.o and i am trying a brand new and working powered usb hub.But after it initialy detected it 1st time it now refuses to work with the m.o.j.o and on occasion it does but it then pretty quickly stops working again,any ideas what is causing it guys?
The usb debugging isn't causing it either as have disabled and enabled again as it is behaving the same either way,it's a simple generic ebay 7 port powered usb hub. All i would be happy with is getting the keyboard and mouse and my usb sd card reader working all from the hub.
Any help would be greatfully appreciated,and thanks in advance
Click to expand...
Click to collapse
Strange, try removing the power? it could be a power usb issue?
I have a USB keyboard and mouse on a 4 unpowered hub and works fine.
Try the trail and error approach, and one item at a time and test each until you fine what makes it fail.
Good luck.
Edit: the MOJO forum is here BTW:
http://forum.xda-developers.com/mad-catz-mojo
More MOJO users there.
Thanks: POWERED USB HUB NOT WORKING ON MAD CATZ M.O.J.O (SOLVED)
gwaldo said:
Strange, try removing the power? it could be a power usb issue?
I have a USB keyboard and mouse on a 4 unpowered hub and works fine.
Try the trail and error approach, and one item at a time and test each until you fine what makes it fail.
Good luck.
Edit: the MOJO forum is here BTW:
http://forum.xda-developers.com/mad-catz-mojo
More MOJO users there.
Click to expand...
Click to collapse
Thanks,i finally got to the bottom of it all,basically added a male to female usb cable a short length like what comes with certain pc external dvd's etc,i have found that if quihoo 360 security app is set to sleep or if i reboot the m.o.j.o then i loose keyboard and mouse through the usb to ps2 adaptor and extension cable atachtched to the powered usb hub.
So now on waking up or restarting the console i simply disconnect the ps2 to usb from the usb extension cable attached to the hub and then detach the hub from the male to female atached to the console.
All i do at that stage then is reatach the hub to the usb male to female attached to the console,then just attach the ps2 to usb to the usb extension cable still attached to the hub and voila all working again.
Hope this helps anyone else who finds the keyboard drops on their mad catz m.o.j.o using a powered hub or ps2 to usb adaptor or both etc