Hi new here,i have the mad catz m.o.j.o and i am trying a brand new and working powered usb hub.But after it initialy detected it 1st time it now refuses to work with the m.o.j.o and on occasion it does but it then pretty quickly stops working again,any ideas what is causing it guys?
The usb debugging isn't causing it either as have disabled and enabled again as it is behaving the same either way,it's a simple generic ebay 7 port powered usb hub. All i would be happy with is getting the keyboard and mouse and my usb sd card reader working all from the hub.
Any help would be greatfully appreciated,and thanks in advance
OUYA MODDER said:
Hi new here,i have the mad catz m.o.j.o and i am trying a brand new and working powered usb hub.But after it initialy detected it 1st time it now refuses to work with the m.o.j.o and on occasion it does but it then pretty quickly stops working again,any ideas what is causing it guys?
The usb debugging isn't causing it either as have disabled and enabled again as it is behaving the same either way,it's a simple generic ebay 7 port powered usb hub. All i would be happy with is getting the keyboard and mouse and my usb sd card reader working all from the hub.
Any help would be greatfully appreciated,and thanks in advance
Click to expand...
Click to collapse
Strange, try removing the power? it could be a power usb issue?
I have a USB keyboard and mouse on a 4 unpowered hub and works fine.
Try the trail and error approach, and one item at a time and test each until you fine what makes it fail.
Good luck.
Edit: the MOJO forum is here BTW:
http://forum.xda-developers.com/mad-catz-mojo
More MOJO users there.
Thanks: POWERED USB HUB NOT WORKING ON MAD CATZ M.O.J.O (SOLVED)
gwaldo said:
Strange, try removing the power? it could be a power usb issue?
I have a USB keyboard and mouse on a 4 unpowered hub and works fine.
Try the trail and error approach, and one item at a time and test each until you fine what makes it fail.
Good luck.
Edit: the MOJO forum is here BTW:
http://forum.xda-developers.com/mad-catz-mojo
More MOJO users there.
Click to expand...
Click to collapse
Thanks,i finally got to the bottom of it all,basically added a male to female usb cable a short length like what comes with certain pc external dvd's etc,i have found that if quihoo 360 security app is set to sleep or if i reboot the m.o.j.o then i loose keyboard and mouse through the usb to ps2 adaptor and extension cable atachtched to the powered usb hub.
So now on waking up or restarting the console i simply disconnect the ps2 to usb from the usb extension cable attached to the hub and then detach the hub from the male to female atached to the console.
All i do at that stage then is reatach the hub to the usb male to female attached to the console,then just attach the ps2 to usb to the usb extension cable still attached to the hub and voila all working again.
Hope this helps anyone else who finds the keyboard drops on their mad catz m.o.j.o using a powered hub or ps2 to usb adaptor or both etc
Related
I don't know why, but ever since i got my USB keyboard.
when i plug my phone in to active sync my keyboard and mouse acts up.
it's like it turns it self on and off.
i type or move for 5 seconds then it stops.
it also seems like it seems to be moving between windows?
like and alt-tab kinda thing.
cuz the IE window would got active and unactive.
am i making any sense?
does anyone else have this problem?
thanks!
bump, please help.
Active synce used to work great on PC but now it's acting up.
I recently replaced my KVM switch with a USB one, so i can use my USB keyboard and wireless mouse.
but ever since I did this, when i plug my phone in to active sync my keyboard acts up.
it's like it turns it self on and off.
for example, I'm chatting with someone, i type for 5 seconds then it stops, and i have to click on the window again.
am i making any sense?
does anyone else have this problem?
the PCI usb port has 4 ports, on it, it has an external 4 port USB hub, 1 usb cable that i use to plug my phone in to sync or d/l pics from my camera, and one port for the KVM switch. could it be my USB port is overloaded?
So i decieded to plug my phone into a USB port on the motherboard. the same problem happens!
so does it rule out my PCI usb ports were over loaded?
I also tried just leaving in the KVM and plugging in the phone. the samething happens!
does anyone know what could be causing this? I installed and reinstalled active sync many times.
Please help me!
hmmm !strange behavior,I'm using both a usb Logitech wireless keyboard and a usb cordless Logitech MX 1000 Laser Mouse.I have also got a separate usb cable attached for my phone,which I use very regularly,but have never had any sort of problem.
Although, I have eight usb ports on my PC,I have plugged each to a separate usb port,well as there are some usb ports in your PC which are cable to work as usb2 while are cable only usb1 data transfer.Checkout and try to connect to ports with usb 2 data transfer capable,check if it works.
secondly,disable 'connection through usb' option in the Activesync and connect the phone with the pc via usb cable and check or there's another option in the Activesync to enable connection through network connectivity or something,as I don't have the Activesync installed in my PC at present ,I can't tell you about it at present.
thirdly,which windows are you using ? if you are using winxp than upgrade to sp2 ,it'll upgrade your usb drivers automatically or download usb update drivers from Microsft site and update your usb drivers,hope it'll solve this problem.
Cheers
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Ray_jai said:
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Click to expand...
Click to collapse
This option enable network connections or somthing is available in the settings option of the Activesync.Right click the small icon in the Task bar of Activesync near the clock icon and you'll get the settings option,check out if this helps,good luck
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Ray_jai said:
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Click to expand...
Click to collapse
Glade you got it worked out,no I'm not using Setpoint,
Cheers
Hi all,
Been having a lot of difficulty with this.
I've read and followed instructions regarding this but am totally stuck.
I have a USB Y cable to provide power (like the top picture in this thread: http://forum.xda-developers.com/nexus-4/orig-development/usb-otg-externally-powered-usb-otg-t2181820), and have also got the following:
Running Android 4.2.2 (Cyanogen Mod 10.1.2), but have also tried Android 4.3 and 4.0.1
Matr1x kernel (says it should have USB OTG support)
USB Host Controller 0.44 app
Unfortunately I'm not allowed to post an outside link as I don't have enough posts, but I've taken screenshots of the USB Host Controller pages, and nothing suggests it wouldn't work:
dropbox.com/sc/ybg5l9zo44fkrue/kZhNN5oFFe
Connecting a Microsoft Xbox 360 controller shows up in the connected devices section fine, but trying a USB stick doesn't work.
I've tried 4GB, 8GB, 64GB sticks that I have, none of which show up, or even have their lights come on.
I've also tried FAT 32, NTFS and exFAT, none of which work...
Does anyone have any ideas..? I'm totally out...
Greatly appreciate any help!
Anyone..?
scorpii said:
Anyone..?
Click to expand...
Click to collapse
Can you tell me what terminal of the cable goes where?
smit.sanghavi said:
Can you tell me what terminal of the cable goes where?
Click to expand...
Click to collapse
I have the cable from the charger/PC going into the female micro usb of the Y cable
USB device plugs into the female full sized USB on the Y cable
Male micro USB of the Y cable goes into phone
Thanks!
Anyone else have any ideas..?
I am trying to connect my NVidia Sheild to a powered usb hub with no luck at this point.
Heres what I'm using:
Powered Hub
USB to Ethernet
OTG to USB
Male to Male USB
So I am taking the OTG to USB and connecting it to the Sheild OTG port. From there I have a Male to Male USB connecting the OTG to USB to the Powered usb hub. When I do this I can see that the Sheild's power light is orange which indicates to me that it is getting power and not acting as the USB Host for the Hub?
I did notice when I tried to use an air mouse directly with the OTG to USB it works as it should but not when it's connected to the powered usb hub instead, then nothing works (just charging). Also my ethernet adapter doesnt work via the powered usb hub or the OTG to USB.
BTW this whole physical setup worked just fine (plug and play) with both android MK808 and MK908. I was surprised that the Sheild isnt picking this up as well.
Can anyone tell me if I have incompatable hardware and if so what is compatable? Also I do not have ROOT access to the Sheild...yet, could that be the issue?
Many thanks in advance.
Chris
Hi I made this thread to find out how I can get USB OTG to work. I have cm 11 s3 mini and want to control my phone by a remote and plug ? flash drives in but have no idea how this works. Also if you could provide a link for a USB OTG cable it would be greatly appreciated. thank you
AndroidGangster said:
Hi I made this thread to find out how I can get USB OTG to work. I have cm 11 s3 mini and want to control my phone by a remote and plug ? flash drives in but have no idea how this works. Also if you could provide a link for a USB OTG cable it would be greatly appreciated. thank you
Click to expand...
Click to collapse
Hi
Its just plug and play. You plug in the USB OTG cable to the phone's micro USB port and on the other end its a female USB port (the same like in your laptop or pc). So you just put in a pen drive and it will get detected on its own. You can open a file manager app and access it, or you can access it directly from any of your other apps (for example if you use MX player for seeing videos then the pen drive videos will automatically load up in the app as well).
To control your phone remotely I am guessing you mean keyboard/mouse?
If you plug in a mouse, a cursor shows up the next second and you have a working mouse. Same with a keyboard, works on its own. If you want to use both together, you need a wireless keyboard and mouse so that you can plug in the dongle to the otg cable, and then both the keyboard and mouse will instantly start working.
If you have a PS3 controller you can even connect that to your phone and use it to play many games - but this does not work via plug and play, you need to follow instructions to set this up and you can search on xda or google for that.
If you search USB OTG on amazon or ebay you will find loads of places to buy it from in your country.
http://www.ebay.com/sch/i.html?_fro...0.TRC0.H0.Xusb+otg.TRS0&_nkw=usb+otg&_sacat=0
My Samsung S9 has had some screen damage and the touchscreen mostly does not work.
In order to navigate it I must use a mouse that I connect to the phone using the supplied USB C- A adapter.
I wish to get my phone repaired but I wish to backup all the data upon it first.
If I plug my phone directly into my PC, it asks for my permission to allow the PC access. However, since the touchscreen does not work properly, I cannot press the button to accept.
I could not plug both the mouse and PC simultaneously.
So I bought a USB-C hub. (Actually I've bought several, none of them have worked, this latest one is the most expensive and I had hoped it would work - (https://www.amazon.co.uk/gp/product/B07ZVKTP53/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1).
It has a separate port for USB-C Power Delivery and a separate one for data.
I plug the attached USB-C cable from the hub into my phone, and then I plug my mouse into a regular USB port, my charger into the USB-C PD port, and another USB-C to A cable from the USB-C Data port on the hub into a USB port at the back of my (new) PC.
Now my computer does not recognise my phone at all, nor does my phone seem to acknowledge it is connected to a PC. The mouse still works upon the phone and it charges fine through the PD port. If I plug the phone straight into the PC, it is recognised, so I do not think the problem lies there. The hub seems to block communication between the phone and PC.
I would like to backup my data and get my phone repaired. If anyone can solve the USB-C Hub issue or propose another solution to my problem then I would be grateful.
A mouse and keyboard will take priority over anything else in a hub.
I'm betting the hub's power is 2000mA or 2.0 Amps.
What does your fone charger state its power is? Add the mouse, keyboard, and fone's milliamps together. If it's more than the hub's power pack supplies....
In this situation, I would use Vysor, this will defo solve your problem, it allows you work with your fone on your pc/lappy by providing a lovely window that is a duplicate of your fone screen, you'll be glad you found this!!!
I can provide an old cracked version I used for my emergencies, if there is no objections?
Then you'll only need the mouse to use as your finger
Google Vysor. case closed lol.
Pachacouti said:
A mouse and keyboard will take priority over anything else in a hub.
I'm betting the hub's power is 2000mA or 2.0 Amps.
What does your fone charger state its power is? Add the mouse, keyboard, and fone's milliamps together. If it's more than the hub's power pack supplies....
In this situation, I would use Vysor, this will defo solve your problem, it allows you work with your fone on your pc/lappy by providing a lovely window that is a duplicate of your fone screen, you'll be glad you found this!!!
I can provide an old cracked version I used for my emergencies, if there is no objections?
Then you'll only need the mouse to use as your finger
Google Vysor. case closed lol.
Click to expand...
Click to collapse
Hi
Thanks for your reply
It's not a battery hub, but just a USB-C hub (check the link). Power comes from the PD USB-C port which is hooked up to my phone's original USB-C charger.
It also fails to work even when a mouse isn't attached to it.
I will look into Vysor. Also thought about the possibility of using a standalone bluetooth mouse which would free up the cable.
Your fone will suck the life out of a poorly powered hub, by using vysor, your pc/lappy mouse will work your fone using vysor, best app I've ever seen for working with broken screens, just plug phone direct into lappy, vysor works if you've no screen at all!!!!!
Use
Vysor
www.vysor.io
...Njoi
Dont pay for mouses/hubs in this scenario. Just pay for a top quality tool. I would place this as my number one android tool for ANY fone.
Again, if all your doing is data recovery (saving your stuff) I have a patch for an earlier version to unlock full version I swear by, you could use this once if only to try before you buy
The hub supports 85W fast charging directly from mains, which is what it is getting.
How do I enable USB debugging specifically for the app?
I have enabled it in developer options but when I connect my phone via USB to my computer as per the Vysor app, another window pops up on my phone asking to allow USB debugging. Ask there is no mouse attached to the phone at this point, I am unable to allow it.