good day to everyone. firstly, i would like to thank you for having the time to read my post.
well basically heres my inquiry, my unit is the alcatel tab t10. i never had any problems with it until recently, my device's usb port suddenly stops working.
tried unchecking the usb debug mode, tried checking it but to no avail, the usb still does not work. it doesnt seem to connect to my laptop. tried changing the cable.
i also tried connecting my device to my brothers laptop.
correct me if im wrong, but when the usb fails to connect to any laptop, their should be a notification in the laptop that the device is not recognized. but in my condition, no notification shows up. its like my device does not really connect at all.
oh and if it helps, i bought an otg cable before it started malfunctioning. but the only thing i had conneceted to my device is a wired mouse and a wired generic gamepad, which both seems to be working perfectly fine.
also, if i connect my device to a wired mouse, it would work perfecly fine. i could also connect to a usb flash drive, that is via the otg cable.
so whats weird is that the usb cable does not work, but the otg cable works fine.
if you have any question or any suggestion , i would truly appreciate it.
Hmm.....well the good thing is the port itself isn't "dead" as you can still utilize it for OTG. My only suggestion is make a backup of all your apps and data and try a factory reset.
Sent from my SCH-R880 using xda app-developers app
thank you for the suggestion guitarman2010. unfortunately my usb port isnt still working. i also reflashed my device's current firware. but still wasnt the solution i was looking for. i was just wondering if there is a directory under the root folder that holds the devices usb driver? would it be possible that the device's driver itself got deleted? i wam still at awe that the otg cable still works like a charm.
and another thing, is the male usb pin the same with the flash drive's pin? cause if i connect the usb cable to the otg cable it wont work, but the flash drive works normally.
sorry for the amount of question im posting
thank you very much for the suggestion. especially when u told me that the port itself wsnt dead. i can now breathe easier..
and future suggestion and advice would be appreciated.
do you guys know how to access the phoneutil in tablet? maybe i should change the usb option to pda? but i heard that its only applicable to samsung 4.0.3 devices? suggestions are appreciated.
Related
I don't know why, but ever since i got my USB keyboard.
when i plug my phone in to active sync my keyboard and mouse acts up.
it's like it turns it self on and off.
i type or move for 5 seconds then it stops.
it also seems like it seems to be moving between windows?
like and alt-tab kinda thing.
cuz the IE window would got active and unactive.
am i making any sense?
does anyone else have this problem?
thanks!
bump, please help.
Active synce used to work great on PC but now it's acting up.
I recently replaced my KVM switch with a USB one, so i can use my USB keyboard and wireless mouse.
but ever since I did this, when i plug my phone in to active sync my keyboard acts up.
it's like it turns it self on and off.
for example, I'm chatting with someone, i type for 5 seconds then it stops, and i have to click on the window again.
am i making any sense?
does anyone else have this problem?
the PCI usb port has 4 ports, on it, it has an external 4 port USB hub, 1 usb cable that i use to plug my phone in to sync or d/l pics from my camera, and one port for the KVM switch. could it be my USB port is overloaded?
So i decieded to plug my phone into a USB port on the motherboard. the same problem happens!
so does it rule out my PCI usb ports were over loaded?
I also tried just leaving in the KVM and plugging in the phone. the samething happens!
does anyone know what could be causing this? I installed and reinstalled active sync many times.
Please help me!
hmmm !strange behavior,I'm using both a usb Logitech wireless keyboard and a usb cordless Logitech MX 1000 Laser Mouse.I have also got a separate usb cable attached for my phone,which I use very regularly,but have never had any sort of problem.
Although, I have eight usb ports on my PC,I have plugged each to a separate usb port,well as there are some usb ports in your PC which are cable to work as usb2 while are cable only usb1 data transfer.Checkout and try to connect to ports with usb 2 data transfer capable,check if it works.
secondly,disable 'connection through usb' option in the Activesync and connect the phone with the pc via usb cable and check or there's another option in the Activesync to enable connection through network connectivity or something,as I don't have the Activesync installed in my PC at present ,I can't tell you about it at present.
thirdly,which windows are you using ? if you are using winxp than upgrade to sp2 ,it'll upgrade your usb drivers automatically or download usb update drivers from Microsft site and update your usb drivers,hope it'll solve this problem.
Cheers
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Ray_jai said:
Thanks, but i don't know how to get active sync to connect thru network?
all the usb ports on my computer are usb 2.0 except for 2.
i tried it on all the usb ports and i get the same results.
thanks in advance.
Click to expand...
Click to collapse
This option enable network connections or somthing is available in the settings option of the Activesync.Right click the small icon in the Task bar of Activesync near the clock icon and you'll get the settings option,check out if this helps,good luck
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Ray_jai said:
Thanks, but i found out what caused the problem.
Logitech Set point caused it! are you using setpoint?
I disabled setpoint and now it works fine.
sigh...
Click to expand...
Click to collapse
Glade you got it worked out,no I'm not using Setpoint,
Cheers
I recently purchased the Lenovo S6000L tablet for the purpose of traveling. I wanted a large screen (10.1) tablet that could do the basic functions of a laptop, without having to lug around my 17.3 inch HP laptop to and from work/etc. My issue is, I work for a company that will not allow us to access their WiFi (security reasons), but we can use any LAN. I purchased an OTG cable and a USB to Ethernet converter. To my surprise, my Lenovo tablet wouldn't recognize the converter, thus, not allowing me to access the internet via the OTG cable. After that failure, I decided to root my tablet, which I did. Even with the root I can't seem to tweak the tablet to allow the internet connection bridge to work. Being P/O, I decided to go a step further by flashing a custom ROM to the tablet in hope that a different ROM would read and react to the OTG setup, but I'm unable to find a ROM that would work. Well their you have it, this is my big issue. Even though those are the steps I've taken or are willing to take, doesn't mean It's the only thing I'm looking to do, I'm open to anything that will work. So I desperately ask, does anyone have or know of a solution for me to use a RJ45 ethernet cable on this S6000L Lenovo tablet?
P.S. I've hooked up the USB to Ethernet to my PC and it worked, so it's not faulty. I've hooked up a flash drive to my tablet via the OTG cable and that worked also, so the OTG cable works as well.
USB to ethernet adapter I'm using: Gigaware® USB Ethernet Adapter
Wayne_1da said:
I recently purchased the Lenovo S6000L tablet for the purpose of traveling. I wanted a large screen (10.1) tablet that could do the basic functions of a laptop, without having to lug around my 17.3 inch HP laptop to and from work/etc. My issue is, I work for a company that will not allow us to access their WiFi (security reasons), but we can use any LAN. I purchased an OTG cable and a USB to Ethernet converter. To my surprise, my Lenovo tablet wouldn't recognize the converter, thus, not allowing me to access the internet via the OTG cable. After that failure, I decided to root my tablet, which I did. Even with the root I can't seem to tweak the tablet to allow the internet connection bridge to work. Being P/O, I decided to go a step further by flashing a custom ROM to the tablet in hope that a different ROM read and react to the OTG setup, but I'm unable to find a ROM that would work. Well their you have it, this is my big issue. Even though those are the steps I've taken or are willing to take, doesn't mean It's the only thing I'm looking to do, I'm open to anything that will work. So I desperately ask, does anyone have or know of a solution for me to use a RJ45 ethernet cable on this S6000L Lenovo tablet?
P.S. I've hooked up the USB to Ethernet to my PC and it worked, so it's not faulty. I've hooked up a flash drive to my tablet via the OTG cable and that worked also, so the OTG cable works as well.
USB to ethernet adapter I'm using: Gigaware® USB Ethernet Adapter
Click to expand...
Click to collapse
you cannot use like that because to use internet from other device to android you must use reverse tethering method and it can be done only from connecting it to a laptop or pc
so yyou cant use internet directly from lan cable to your tab
I don't want to use it from another device.
pradeepxtremehacker said:
you cannot use like that because to use internet from other device to android you must use reverse tethering method and it can be done only from connecting it to a laptop or pc
so yyou cant use internet directly from lan cable to your tab
Click to expand...
Click to collapse
I'm not using it from another device, I'm only using it and want to use it from a router and/or directly from a modem. I only hooked the adapter to my laptop once just to verify the adapter was working.
Wayne_1da said:
I'm not using it from another device, I'm only using it and want to use it from a router and/or directly from a modem. I only hooked the adapter to my laptop once just to verify the adapter was working.
Click to expand...
Click to collapse
yes i understood your question
i said there is no way to use internet in tab from lan cable
The Nexus 7 tablet does it.
pradeepxtremehacker said:
yes i understood your question
i said there is no way to use internet in tab from lan cable
Click to expand...
Click to collapse
Corrections for the above reply: I misread your reply. In theory, reverse tethering is the same method. A source that contains internet(PC) that you bridge to your tablet and gives it internet. The Nexus 7 is one tablet that allows you to bridge a RJ45 to the tablet for LAN access, and their are others. My best guess is it's an software issue that Lenovo has blocked, but I'm looking for a way around it. I don't know if they added anything specific to the stock that is killing that use or is it just that the adapter I purchased isn't compatible with what I believe is Linux based software. As I said, I will travel any path to victory, even if I have to flash software that's used on the Nexus 7, if possible.
Sorry for the delay, I'm at work and people keep coming to me.
Houston, I believe I have a solution to my problem!!
I have no clue why I didn't think about it earlier but all it may take to remedy my issue can be spelled with one word, Portable Wireless Router. Ok, that's 3 words, but who cares! I don't. Whenever I'm in a situation where LAN is available but WLAN isn't, I figure all I would have to do is to plug the LAN into my soon to be purchased TP-LINK TL-WR702N 150Mbps Wireless N Nano Router. And BOOM! my own private WiFi hotspot.
Hello guys i just got new pc case so i installed the hardware and i put my usb cable to usb 3.0 front and my phone it started normally so i copied some photos and i safely remove it.. Then after some minutes i used again the usb but the phone was only charging i couldnt find my sdcard-phone on device manager. So i changed usb port back panel (2.0) and it worked properly :/ any solution? i cant pull always my heavy pc so i can use my phone on the pc! Excuse me for my bad english!
Hi,
You can try different USB ports, different cable or a different pc. If it's just that pc, There's obviously an incompatibility. Perhaps your phone doesn't support USB 3.0?
You can ask about it in the thread from your device section,
http://forum.xda-developers.com/showthread.php?t=1873673
Good luck!
I think I've exhausted my options, hopefully somebody here has an idea.
From day 1, my TF300T has been unable to connect to a PC. At first I thought it was because one of my cats chewed on the USB cable before I could try (it still charged, just no PC connection) so I didn't do anything while it was still under warranty.
Since then, I've tried 3 different cables, multiple PCs and a Macbook, and I can't get anything out of it. It's not detected at all by the computer - no unknown device, no prompt for drivers, no device connected sound when I plug it in. No reaction on the tablet either, whether USB debugging is on or not. I also tried replacing the USB port on the tablet, but got the same thing. I doubt it's a driver issue since I'm not getting anything at all on either end of the connection.
It DOES connect to the dock ok, and all the dock functions seem to work. I've tried connecting the USB cable to both the tablet directly and the dock, and I get nothing from either port.
I'd really like to be able to flash custom ROMs on it, and I can't find a working way to root or flash it without a functioning USB connection. Could it be the third-party USB cables giving me problems, and if so, is there one that actually works? And if not, is this just a lost cause?
My s22 ultra suddenly does not work on dex. Theres no way to access the sd via a pc either.
I was using this exact setup and it worked fabulously.
As far as i know i went to bed one night and it didnt work the next time i went to use dex.
Reboot phone and pc? Is the phone recognised when connected? Try another cable, does it work on a different pc. Do other USB devices connect ok etc etc
i have rebooted both phone and pc. Same cable as when it did work infact the samsung original that came with the s22. My s9+ does not connect. Both phones DO charge via usb c.
I have infact reinstalled my pc and resest my phone to factory trying to fix this.
Still to no avail.
Does it connect to another pc? Usb pc hub might have failed
its a brand new laptop and it does power the phones. and it all did work fine. i can even power my usb c vape through the same port
there is not an alternative machine to test on
actually i just thaught of this, the last night i was using it i had the standard popup on my phone asking to allow dex to run. An ok responce and cancel or not now responce, i dont remember exactly.
Could this have done something if i hit cancel
also could there be something in the pc bios i may have not realized could effect this. Since i was on the same night trying to boot to a usb linux pendrive
When you connect your phone can you access its files on your pc? Is it recognised as drive
Ok so ive even reset the bios to system defaults and tried a regular usb to usb-c and still nothing
raul6 said:
When you connect your phone can you access its files on your pc? Is it recognised as drive
Click to expand...
Click to collapse
nope
Something is wrong with pc usb hub
raul6 said:
Something is wrong with pc usb hub
Click to expand...
Click to collapse
could it have anything to do with the phone usb connection settings. When you plug in a usb otg it normally would give an option for transfer or charge etc on the phones pull down menu and all its doing is saying fast charging
Try phone on another pc
Absolutely everything else works through usb mate.
What else can you access via USB. Drives, devices?
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
paralaxicon said:
well i can access the standard usb port with an sd card reader. read write and even installed windows off it. So this usb to usb c should work fine.
If it were just the usb c hub blown this would not be the case.
Click to expand...
Click to collapse
im currently trying to see if i can run a lubuntu through usb bootable key and try to access the usb c ports from that.
I have been reading about my laptop and apparently it has a reputation of usb issues. lenovo x1 yoga gen 2 on win 10
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
paralaxicon said:
Solved. During a bios update it appears the bios setting for thunderbolt usb-c was changed to disabled. As soon as i discovered this and rebooted it worked so if anyone is having issues with this they may want to check there bios settings.
4 days of struggling over. Dang its nice to beat a computer once in a while.
Click to expand...
Click to collapse
Do you have Link to Windows enabled on your phone? If so, turn it off and try running DeX.