Related
I'm hoping someone here can shine a little light on this. My car's receiver is a Pioneer DEH-3100UB, which includes a USB port and is designed specifically to connect an iPod via special cable or any Class 1 USB storage device. The Pioneer will not detect the G1, as other people have discussed on a bunch of car audio and other forums. The interesting part is this: If I take the Micro SD card out of my G1 and connect it to the Pioneer via a USB SD card reader, the card is fully readable. I've tried all sorts of suggestions from enabling/disabling USB debugging, to creating a shortcut to the SD Card via AnyCut and checking off the use as mass storage device option. People are not having this difficulty with other receivers including a usb port.
Obviously I'm not looking for help with the Pioneer, but I am very curious what the heck happens when you tell the G1 to mount. What does it do that makes it differ in any way from a 'Class 1 USB device?' Is there a way to alter what the hell happens when you connect the G1?? Is the G1 not really a Class 1 USB device?
Why was rooting/JF so much easier than hooking up to my car stereo
Sounds like a driver problem. Just about any card reader you install has to have drivers of some kind. Maybe the OS on the car stereo doesn't have drivers that support the card reader built into the G1? Just a thought.
by class 1, do you mean USB 1.0 ?
coz the G1 has a USB 2.0 port. and as any usb 2.0 device, it is supposed to be backward compatible. The only issue is the speed as it will connect at the lower speed.
Just wanted you to know its not just pioneer. I have a Clarion VRX785BT, and it too cannot connect to it It makes me sad. HOPEFULLY I can get BT audio streaming working as it does support bluetooth audio...
What happens ON THE PHONE when you plug the USB cable into the Pioneer? When I connect mine, it comes up with a notification (USB Connected) and I can choose Mount which switches over to the Mass Storage driver. Have you done that? Just a suggestion, because I can't think what else it could be,
Tommy
Valicore said:
What happens ON THE PHONE when you plug the USB cable into the Pioneer? When I connect mine, it comes up with a notification (USB Connected) and I can choose Mount which switches over to the Mass Storage driver. Have you done that? Just a suggestion, because I can't think what else it could be,
Tommy
Click to expand...
Click to collapse
Correct. It's not always the phone. Realize that some of the world has not caught up to the fact that the G1 exists.
The G1 is a usb 2.0 device !!!
Please note: USB 1.0 or 2.0 (speed ratings) have nothing to do with the OP's issue.
Class 1 is a certain type of connection, not the speed.
-bZj
Hummeroid said:
HOPEFULLY I can get BT audio streaming working as it does support bluetooth audio...
Click to expand...
Click to collapse
The G1 only support Headset and Hands free BT profiles - neither are what you need for streaming (quality) audio over BT. We'll have to wait for a BT update with A2DP profile - The Cupcake update (if it exists) is rumored to include A2DP
/Mats
This isnt going to fix this problem, but just buy a cheap auxiliary cable and mini usb to 3.5mm converter, and plug it in through the aux jack on your head unit. Thats how i play the music on my G1.
Is there a way to alter what happens on the phone when it detects a USB connection, modify the usb driver, or something else totally ridiculous to get the damn thing to work?
Hey all, I've had my Captivate now for afew days and I'm loving it, but today I ran across an issue that's driving me crazy.
For some reason when I connect it to my PC I'm not longer getting the Mount SD option on the phone and can't look at my files. I've enabled USB debugging and tried it. I've told it to come up as Mass Storage and tried it. I also told it to Ask when connected and it's still not working properly. The drives show up in Windows but cannot be accessed. I also no longer get the USB notification up in the notification bar.
The weird thing is sometimes if I restart the phone and connect it everything is fine, but then if I go to do it again nothing. Anyone have any suggestions?
Biggest misconception here is that its random, it isn't.
Download kies by samsung and update it and you will get the right USB drivers installed automatically.
If you choose not to do that, you'll Vast have to keep trying different ports or restarting.
Its also possible that you may have a faulty wire but this is unlikely.
systoxity said:
Biggest misconception here is that its random, it isn't.
Download kies by samsung and update it and you will get the right USB drivers installed automatically.
If you choose not to do that, you'll Vast have to keep trying different ports or restarting.
Its also possible that you may have a faulty wire but this is unlikely.
Click to expand...
Click to collapse
I've tried it with multiple wires, and when it works it is reliable, but most of the time it's just not showing a USB connection on the phone.
I spent awhile downloading Kies and it's updates and in Mass Storage mode it sees the drives of the phone but doesn't let me use them. I Kies mode it does nothing... This is so confusing...
Go in here download the drivers:
http://forum.xda-developers.com/showthread.php?t=728929
Be aware, they might take up to 15 minutes to install, and no KIE is not included.
Make sure you close all your apps on phone before connecting to PC. Few apps that use the SD will hold the resource and not allow for PC connection.
skizzz said:
Go in here download the drivers:
http://forum.xda-developers.com/showthread.php?t=728929
Be aware, they might take up to 15 minutes to install, and no KIE is not included.
Make sure you close all your apps on phone before connecting to PC. Few apps that use the SD will hold the resource and not allow for PC connection.
Click to expand...
Click to collapse
I downloaded those afew days ago but I will redownload and reinstall again just incase. I think the fact that the USB notification isn't showing up in the bar on the top of the phone is what's confusing me the most. Previously I would see the USB Icon and something would pop up saying I need to mount the drive. I would mount it and there would be no problem. Now I'm not getting that at all and I've tried Mass Storage, USB Debugging, Kies, and Ask.
I've never had a problem connecting my Captivate to my Windows 7 64 bit computer. I didn't install Kies or any drivers either. Not sure what all the fuss is about. I'm suspecting a lot of PEBCAK errors.
I'm starting to think there are some strange power requirements when connecting the phone to USB. Most of my systems have been fine but on one, when I connect the phone to the front USB ports, the USB Wifi adapter on the back simply stops working. While the phone is connected, the computer refuses to recognize the Wifi adapter. A soon as I disconnect the phone it starts working again.
I've seen people on other forums with intermittent issues getting the mass storage connection to work when connected to the front ports on their systems. A lot of times the front ports are connected through a USB hub in the computer case that doesn't deliver full power. If the phone isn't drawing enough power or is shunting power from other devices, this might explain the issues people are having.
Mine is acting up . I used both teh 5.02 drivers from samsung and the one linked here and similar results. In Samsung mode it goes to the Digital Still camera and flakes and on mass storage it shows two new drives..neither of which is writable or readable. This is on a cap with no SD card and XP sp3. I tried different ports but with the same result.
I was fighting with this all day. I installed, uninstalled, reinstalled all the drivers and kies, but, I was trying to connect via media player and nothing was happening. Then I noticed that there was a small message popping up on the Captivate's screen that said something about the device had to be on the idle screen before it would connect and fun the sync software. Tried turning off all running programs and still nothing. Then, I remembered that I had switched to Launcher Pro. I switched back to touch wiz, and lo and behold, it connected right up and allowed me to sync items with media player.
Interesting. I've been using ADW.Launcher and haven't see this problem except when I don't get the cable securely inserted into the Captivate. I even use a Nokia cable most of the time. The Kies Drivers are clearly the most stable. I downloaded the Drivers from the Captivate microsite and found they didn't support KIES, so I just reinstalled the KIES driver for MTP. Everything else works fine on W7x64.
++++UPDATE+++++ Validating MSHampton post
Well this sucks. On my Captivate, unless you are using TW.Launcher and in the idle screen, the Captivate won't launch MTP so you can connect to KIES. The USB Storage mode works with other Launchers (ADW and LaunchPro), but not KIES or Media. I didn't try PC Internet tethering. I switched between the two several times, and KIES only works with TW.Launcher on my device.
Is there anyone who knows of a Launcher OTHER than TW.Launcher that will interface with KIES so that the Captivate can connect? Or can ADW or LauncherPro be "tweaked" for the Captivate? I was just starting to like ADW.Launcher.
hitchb said:
[snip] Most of my systems have been fine but on one, when I connect the phone to the front USB ports, the USB Wifi adapter on the back simply stops working. While the phone is connected, the computer refuses to recognize the Wifi adapter. A soon as I disconnect the phone it starts working again.
[snip]
Click to expand...
Click to collapse
Holy crap, I have that EXACT same problem. I thought it was just the fact that my USB Wifi adapter is a piece if crap (which it is).
Just for reference, what kind is yours? Mine is a Belkin Wireless G F5D7050.
gtg465x said:
Just for reference, what kind is yours? Mine is a Belkin Wireless G F5D7050.
Click to expand...
Click to collapse
It's the Tenda 311U which is also a cheap piece of crap ($15 at Micro Center.) It doesn't look like they use the same chipset.
I've had the same issue as well. Hooking up the Captivate to the front USB ports disables my USB mouse (on the back). I'm not sure what it could be doing that would lock up the USB bus...
Using Windows 7 netbook
I finally got tired of it deciding and put in the mode to ask me when I connect. the problem i am having is when you just charge it, it does not know that it is just charging and wants to go to ysb mass storage or the other screen. also I use double twist to connect to the phone.
thanks
Jon
The best bet here is to use USB ports on the back of the computer.
Griffon23 said:
Hey all, I've had my Captivate now for afew days and I'm loving it, but today I ran across an issue that's driving me crazy.
For some reason when I connect it to my PC I'm not longer getting the Mount SD option on the phone and can't look at my files. I've enabled USB debugging and tried it. I've told it to come up as Mass Storage and tried it. I also told it to Ask when connected and it's still not working properly. The drives show up in Windows but cannot be accessed. I also no longer get the USB notification up in the notification bar.
The weird thing is sometimes if I restart the phone and connect it everything is fine, but then if I go to do it again nothing. Anyone have any suggestions?
Click to expand...
Click to collapse
If you're still having problems, select mass storage and connect the usb (or select ask every time and it will ask when you plug it in). To access the drive like a removable drive, you have to swipe the icon in the top right of the screen and select the usb selection. Then click mount and it should work! I had a hard time with this too and thought it wasn't very intuitive. Good luck!
joedoe said:
The best bet here is to use USB ports on the back of the computer.
Click to expand...
Click to collapse
Yep, strangely enough using the back ports worked. I'll have to see if a powered USB hub will work and then I guess we can conclude that it's a power issue.
mrbisme33 said:
If you're still having problems, select mass storage and connect the usb (or select ask every time and it will ask when you plug it in). To access the drive like a removable drive, you have to swipe the icon in the top right of the screen and select the usb selection. Then click mount and it should work! I had a hard time with this too and thought it wasn't very intuitive. Good luck!
Click to expand...
Click to collapse
I've set it to both Mass Storage and Ask every time and the problem I get is that I only get the USB icon up top sometimes, it's very rare. I've tried this on multiple ports and multiple PCs with the drivers downloaded and sometimes the notification shows up and I can select mount, but most of the time nothing is in my notification bar at all.
I love this phone but I don't understand why it's so frustrating just to connect it to a PC. I've also tried the Kies methods and it sees the phone, but doesn't let me access the files.
cellgeek said:
Interesting. I've been using ADW.Launcher and haven't see this problem except when I don't get the cable securely inserted into the Captivate. I even use a Nokia cable most of the time. The Kies Drivers are clearly the most stable. I downloaded the Drivers from the Captivate microsite and found they didn't support KIES, so I just reinstalled the KIES driver for MTP. Everything else works fine on W7x64.
++++UPDATE+++++ Validating MSHampton post
Well this sucks. On my Captivate, unless you are using TW.Launcher and in the idle screen, the Captivate won't launch MTP so you can connect to KIES. The USB Storage mode works with other Launchers (ADW and LaunchPro), but not KIES or Media. I didn't try PC Internet tethering. I switched between the two several times, and KIES only works with TW.Launcher on my device.
Is there anyone who knows of a Launcher OTHER than TW.Launcher that will interface with KIES so that the Captivate can connect? Or can ADW or LauncherPro be "tweaked" for the Captivate? I was just starting to like ADW.Launcher.
Click to expand...
Click to collapse
This just solved my kies and windows 7-64bit issue. This should be sticked advice or added to the wiki.
USB Setting no PC- Connection
I just got my AT&T captivate and I notice that under application,usb setting I don't have the PC-internet option in there. This is only what I have under USB setting:
Kies(Firmware update)
Media Player
Mass storage
Ask on connection
So, question is, how do I enable the pc-internet option? Any suggestion I really appreciate.
Sam
Im trying to get my radio to read the mp3's from my phone but its simply not reading it, even after mounting it... nothing. I stuck an external sd card into the phone, copied the mp3's to it and also nothing, any ideas? The radio reads the usb stick just fine.
Radio reading mp3s???
what exactly do you mean radio not reading usb do you mean like when you plug in the connection in your car through the car charger?
The radio in the car has a usb port, you can attach usb drives to it and it would play every mp3 thats on it. Now when i plug in my captivate to it and mount it it simply says device not recognized.
Try going into Settings - Applications - USB Settings - and trying Mass Storage.
I have not been able to get Android to play over my USB car radio (Stock GM Bose system) Crapple products, Thumb drives and Zune work, but Android is a no go for me.
Might need to try USB Debugging too..When I had Android on my Tilt (no external audio) it had to be enabled or the USB to 3.5mm wouldn't work.
I've tried USB Debugging mode also.
YellowGTO said:
I've tried USB Debugging mode also.
Click to expand...
Click to collapse
Ya me too, the radio just doesn't recognize it, radio says "invalid usb information aquired". I rather use the usb cable than the usb>3.5m cable since it'll charge the phone too.
turn on mass storage or try media player mode with USB Debugging on as well
labbu63 said:
turn on mass storage or try media player mode with USB Debugging on as well
Click to expand...
Click to collapse
Doesn't work, tried every possible setting.
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
paniqueado said:
I have a MTCD head unit MX (witson) with Android 5.1, my problem is that the USB port cannot recognize my phones, A note 4 with Android 6.0 (eRobot ROM) and a Samsung GT386T no rooted with stock ROM 4.4.2. The USB port works find with a usb stick, I can play music, pictures, etc. but not my phones. Both have the USB debugging enable.
When I plug a phone it is charging but nothing happens, my note 4 after a few minutes pop a windows saying that there is a problem with the connection MTP and that I need to download samsung Sync etc.
What I want to do is to use the mirror link function.
Any of you know something about this issue?
Thanks in advance for your help.
Click to expand...
Click to collapse
I believe i read that there is a specific app that you have to run on these to do the mirror link...easy connect, maybe? Did your HU come with an instruction booklet? I was looking through mine earlier and it went over in detail how to setup mirroring through that app.
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
paniqueado said:
Yes, when I tried to use EasyConnected is when I saw the problem. The app waits for my phone to be connected, It says that it must be turned on USB debugging, but it is on. Then I checked in the File manager and the USB was not enable there, like if nothing is plug it. If I plug a USB memory it works fine.
I will try today to do a factory reset.
Thank you!
Click to expand...
Click to collapse
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
JordanB said:
You ever get this solved? My easyconnected never stays connected. WiFi and USB both are garbage.
WiFi randomly disconnects.
USB also disconnects asks me to allow USB debugging every couple of minutes. The phone never remembers the headunit, so it constantly asks me again to allow connection. Must be a crap RSA fingerprint coming from the headunit.
Click to expand...
Click to collapse
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
I seem to have USB connection working now with only one "allow USB Debugging?" popup, only when I first connect.
What I did was turn wifi off on the headunit. I am not sure why it worked, but I just wanted to turn everything not needed off, and see if the headunit would stop disconnecting all the time. So far so good. I can probably live with one annoying popup, instead of one every few minutes.
Of course you have to keep the screen on the phone on, and the battery in the phone will deplete faster than the headunit charges it, but still an improvement. I had a 30 minute drive today, and the USB never disconnected!
paniqueado said:
Nope, Still does not work for me. Same symptoms as you. I already tried with 3 differents phones, factory reset and different versions of easyconnected.
Click to expand...
Click to collapse
paniqueado, try the da_anton ROM. I just installed it and easyconnect finally works as it should. I just plug in my phone to the USB and it fires right up! One prompt if any on the head unit, and NO disconnects whatsoever.
I have no issue getting my Chord Mojo working with the UAPP app on my S8+ but when I try to use band camp, youtube or any other apps it will not route audio to the DAC properly. Note that UAPP uses a proprietary driver for routing data to the extetnal DAC. A notification comes up when connection Mojo to S8+ via micro usb-usb c otg cable(see screenshot below)
I have tried every option in the normal settinsg and developer mode but no matter what it just reverts back to "charge connected device". I have played around with all the USB settings in Developed mode;
Prevent automatic usb routing
Setting the usb device to audio source,
/MTP
Etc
Nothing works.
I even uninstalled UAPP, attached Mojo and opened band camp, still nothing. Worse yet, often it will freeze with Mojo connected and then restart itself or get stuck on the carrier boot screen during restart.
Seems that Android system is not allowing the device to connect properly although I can't be sure. I just want to be able to send all my audio to my exceptional Chord Mojo. Bummer because everything worked fine on S7 Edge running Android 7.0 when I selected MTP under developer options. Unless there's a fix I'll only be able to use Mojo with UAPP.
Im having very similar problem on S8, got an OPPO HA2 DAC, have bought a micro USB to USB C cable, and the phone is charging the DAC? It doesnt let me change the output as per your screen shot above.
Can anyone help?
I've ordered the meenova c to b otg cable, will report back.
i use andoird4viper with my DFR and it works. just had to lock the effect to headset and it should work system wide, as least for my case.
The meenova off cable made no difference with regard to getting Mojo to work with apps other than UAPP.
mstormer said:
i use andoird4viper with my DFR and it works. just had to lock the effect to headset and it should work system wide, as least for my case.
Click to expand...
Click to collapse
I'm not rooted and don't want to root.
Still no fix in sight but it is definitely a software issue and most likely with Android system processes.