Related
Guys, As of curiosity i tried to flash the Brazil lollipop version for out mobile. After that i tried to downgrade KK 4.4.2 and also succeeded in that also. But when i try to flash KK 4.4.4 my phone competently turned off (My battery is 30 % only while i flashed). When try to turn the phone on only empty black screen. No sign of boot. So i kept my phone for 8 - 9 Hrs charge but after that also no success.
Tried to hold down the power button for 2 min while charging - No result
But my notification LED is blinking when i hold down the power button.
Is my phone in coma or ????
Guys plz help me.
Thanks in advance
rockstarckarthik said:
Guys, As of curiosity i tried to flash the Brazil lollipop version for out mobile. After that i tried to downgrade KK 4.4.2 and also succeeded in that also. But when i try to flash KK 4.4.4 my phone competently turned off (My battery is 30 % only while i flashed). When try to turn the phone on only empty black screen. No sign of boot. So i kept my phone for 8 - 9 Hrs charge but after that also no success.
Tried to hold down the power button for 2 min while charging - No result
But my notification LED is blinking when i hold down the power button.
Is my phone in coma or ????
Guys plz help me.
Thanks in advance
Click to expand...
Click to collapse
Go into bootloader mode, and click the green link in my signature to see the guide
for downgrading to 4.4.4, and may I ask why you decided to downgrade, the article warned you about that
AgentChaos said:
Go into bootloader mode, and click the green link in my signature to see the guide
for downgrading to 4.4.4, and may I ask why you decided to downgrade, the article warned you about that
Click to expand...
Click to collapse
I try reflash 4.4.4. Retail Brazil, but no work only show white screen with WARNING, and no run system, any idea...
AgentChaos said:
Go into bootloader mode, and click the green link in my signature to see the guide
for downgrading to 4.4.4, and may I ask why you decided to downgrade, the article warned you about that
Click to expand...
Click to collapse
he cant go into bootloader as mentioned...he hardbricked his device...we have to wait for factory images of moto 5.0 to fix this
yeshwanthvshenoy said:
he cant go into bootloader as mentioned...he hardbricked his device...we have to wait for factory images of moto 5.0 to fix this
Click to expand...
Click to collapse
well if cant go into bootloader mode then the 5.0 firmware image is useless
AgentChaos said:
well if cant go into bootloader mode then the 5.0 firmware image is useless
Click to expand...
Click to collapse
the guy who made uncorrupted bootloader tool uses factory images to make the tool he said so himself on the thread so we are waiting 5.0 firmware images.... know well before u can conclude
No Network
Guys... same here out of curiosity i also did flashing 5.0 on my asian Xt 1033 but after flashing I was greeted with No network on both of my sim cards and now i have downgraded to asian 4.4.4 but still no network, although wifi was and is working properly... Bluetooth too working... please help guys... i haven't modified any files in any firmware.
hunterhere said:
Guys... same here out of curiosity i also did flashing 5.0 on my asian Xt 1033 but after flashing I was greeted with No network on both of my sim cards and now i have downgraded to asian 4.4.4 but still no network, although wifi was and is working properly... Bluetooth too working... please help guys... i haven't modified any files in any firmware.
Click to expand...
Click to collapse
I think your imei is erased..check your imei..*#06#
Hi everyone,
My father had a problem with his Honor 8. When the new update was released it bricked the phone. Using the DLOAD, we were able to fix this problem, however he was still experiencing regular unwanted reboots. He decided to try changing the firmware again using the rollback file (from android 7.0 to 6.0) on a phone that was already on Android 6.0... Now the phone reboots on his own to the blue honor log screen and doesn't get out of it. We are not able to shut it off, nor go to DLOAD or anything. The only thing I was able to achieve was going to the fastboot. Anything else won't work.
The phone is an Honor 8 bought on Aliexpress. It's a AL10 version but the buyer had the FRD-L19 firmware installed on it. With the DLOAD, the last firmware the phone was on, was an EMUI 4.1 Android 6.0 L19 firmware.
Anyone has any solution in order to install newly a firmware and unbrick the phone please ?
Ramiirou said:
Hi everyone,
My father had a problem with his Honor 8. When the new update was released it bricked the phone. Using the DLOAD, we were able to fix this problem, however he was still experiencing regular unwanted reboots. He decided to try changing the firmware again using the rollback file (from android 7.0 to 6.0) on a phone that was already on Android 6.0... Now the phone reboots on his own to the blue honor log screen and doesn't get out of it. We are not able to shut it off, nor go to DLOAD or anything. The only thing I was able to achieve was going to the fastboot. Anything else won't work.
The phone is an Honor 8 bought on Aliexpress. It's a AL10 version but the buyer had the FRD-L19 firmware installed on it. With the DLOAD, the last firmware the phone was on, was an EMUI 4.1 Android 6.0 L19 firmware.
Anyone has any solution in order to install newly a firmware and unbrick the phone please ?
Click to expand...
Click to collapse
I had the,same experience. There is only one solution : assistance centre
grilla99 said:
I had the,same experience. There is only one solution : assistance centre
Click to expand...
Click to collapse
Hi Grilla99,
Thanks for your feedback. Was it still under warranty ? Did you pay anything ?
Thanks
Ramiirou said:
Hi everyone,
My father had a problem with his Honor 8. When the new update was released it bricked the phone. Using the DLOAD, we were able to fix this problem, however he was still experiencing regular unwanted reboots. He decided to try changing the firmware again using the rollback file (from android 7.0 to 6.0) on a phone that was already on Android 6.0... Now the phone reboots on his own to the blue honor log screen and doesn't get out of it. We are not able to shut it off, nor go to DLOAD or anything. The only thing I was able to achieve was going to the fastboot. Anything else won't work.
The phone is an Honor 8 bought on Aliexpress. It's a AL10 version but the buyer had the FRD-L19 firmware installed on it. With the DLOAD, the last firmware the phone was on, was an EMUI 4.1 Android 6.0 L19 firmware.
Anyone has any solution in order to install newly a firmware and unbrick the phone please ?
Click to expand...
Click to collapse
Hey i think there is a problem with new update , mine too experience same in my case my device is FRD-L02 . After several times i left the phone to Honor CARE. they said it takes upto 10-15 days also said they will replace the motherboard.
So just give it to care before with lock bootloader , dont unlock the bootloader in this case otherwise it will costs a lot. have a good day.
Ramiirou said:
Hi Grilla99,
Thanks for your feedback. Was it still under warranty ? Did you pay anything ?
Thanks
Click to expand...
Click to collapse
Nothing, just waiting for it to repair
The instant solution. Dc-pheonix , use it , buy 15 credits worth 15 euros ,flash with firmware. Then rebrand your Honor 8 using the guide here on XDA. Njoy.
amansaini said:
The instant solution. Dc-pheonix , use it , buy 15 credits worth 15 euros ,flash with firmware. Then rebrand your Honor 8 using the guide here on XDA. Njoy.
Click to expand...
Click to collapse
This is fast and super but it costs , there he can get free service by honor :silly:
dileepxdn said:
This is fast and super but it costs , there he can get free service by honor :silly:
Click to expand...
Click to collapse
True. My solution is only if out of warranty or warranty not provided!
Hi guys !
Thanks for all you answers. The phone is still under warranty so I contacted Alianz since I had a 1 year repair warranty possibilty and I sent the phone to them. I'm now waiting for them to tell me what's going to happen with the phone.
I'll keep you updated with what's going to happen and when we'll get the phone back
Thanks again !
Hi everyone,
I got the phone back from warranty and they solved the problem. I can't really tell what they did because the paper that came with it wasn't very detailed. But the phone is working perfectly anyway.
Thanks to everyone who tried to help solving this matter
Hi, I have a honor 8 that bootloops I can only access to fastboot not in bootloader or recovery. Bootloader is locked, i can't flash anything and i can't unlock it because I don't have the Product ID. The dload and three fingers method doesn't work. What can I try to unbrick it? I can't even turn it off.
OG_Winzer said:
Hi, I have a honor 8 that bootloops I can only access to fastboot not in bootloader or recovery. Bootloader is locked, i can't flash anything and i can't unlock it because I don't have the Product ID. The dload and three fingers method doesn't work. What can I try to unbrick it? I can't even turn it off.
Click to expand...
Click to collapse
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
When you say that the dload method doesn't work, what do you get when you try it ? You have to flash the proper firmware for your phone, otherwise it will deny it, you can maybe use a rollback package.
Try the Huawei tool ... U can fix it easily and you can play around don't panic it's the first thing ...
hassanjavaid8181 said:
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
Click to expand...
Click to collapse
I tried one firmware via dload but the phone doesn't even detect anything there isn't any error it just keeps rebooting. The firmware i need to install is FRD-L09C432B131.
Rayan19997 said:
When you say that the dload method doesn't work, what do you get when you try it ? You have to flash the proper firmware for your phone, otherwise it will deny it, you can maybe use a rollback package.
Click to expand...
Click to collapse
i just does nothing. not any errors or loading. The phone just keeps rebooting.
OG_Winzer said:
i just does nothing. not any errors or loading. The phone just keeps rebooting.
Click to expand...
Click to collapse
Maybe you are doing it wrong. As long as you have a stock boot.img and a stock recovery you should be able to use this method.
luisaet82 said:
Try the Huawei tool ... U can fix it easily and you can play around don't panic it's the first thing ...
Click to expand...
Click to collapse
If you mean Hisuite I already tried it. my PC detects the phone and hisuite launches by itself but then doesn't detect any phones. when I try the rescue tool "resuce mode enter..." appears on the screen but then hisuite says that the phone isn't compatible with the rescue mode.
OG_Winzer said:
If you mean Hisuite I already tried it. my PC detects the phone and hisuite launches by itself but then doesn't detect any phones. when I try the rescue tool "resuce mode enter..." appears on the screen but then hisuite says that the phone isn't compatible with the rescue mode.
Click to expand...
Click to collapse
I think he doesn't mean hisuite but Huawei multi-tool, which is available on xda forums and enable to recover from a brick
Envoyé de mon FRD-L09 en utilisant Tapatalk
Rayan19997 said:
I think he doesn't mean hisuite but Huawei multi-tool, which is available on xda forums and enable to recover from a brick
Envoyé de mon FRD-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
OG_Winzer said:
I tried one firmware via dload but the phone doesn't even detect anything there isn't any error it just keeps rebooting. The firmware i need to install is FRD-L09C432B131.
Click to expand...
Click to collapse
I asked firmware number because you cannot flash lowers firmware number after flashing higher firmware number..
You were on b131??
OG_Winzer said:
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
Click to expand...
Click to collapse
Alright I think this is a good point , now that you can use the dload method you need to know under which EMUI version you were because the phone won't accept a firmware that is lower or to high compared to your actual EMUI version.
What I did when I was in your case is flashing a rollback package downloaded from honor official site and then flash an old EMUI which is under Android 6.x.
After a few tries you can make it, I hope I've been clear, English isn't my native language
An investment in knowledge pays the best interest.
B.Franklin
Rayan19997 said:
Alright I think this is a good point , now that you can use the dload method you need to know under which EMUI version you were because the phone won't accept a firmware that is lower or to high compared to your actual EMUI version.
What I did when I was in your case is flashing a rollback package downloaded from honor official site and then flash an old EMUI which is under Android 6.x.
After a few tries you can make it, I hope I've been clear, English isn't my native language
An investment in knowledge pays the best interest.
B.Franklin
Click to expand...
Click to collapse
Thanks a lot for your help but I don't really know how but while I was trying to go back to the erecovery menu the phone just boot up and it worked. I did a factory reset because the phone was a bit laggy and now it works.
Lol everything's alright then
An investment in knowledge pays the best interest.
B.Franklin
OG_Winzer said:
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
Click to expand...
Click to collapse
Ok here i go ... Open the Huawei tool ... And follow steps to install TWRP ...turn of the phone , once it's off hold the volume button down then connect the phone to the PC that would take to some type of fastboot ! Flash recovery the 2 option .... Reboot into TWRP .. from the Huawei tool u would see and option of stock i think there u can copy the recovery OEM info system and boot option flash them all one by one .... Reboot the phone ... And you would be redirected to recovery from WiFi and now it would work since u flash the OEM info now the phone knows what to look for u won't get the getting info failed ... And that's it just makes sure u have a good stable WiFi connection ...
And like a said the more calm and relax u do these the better the first time I screw the phone I almost get a heart atack :crying: it's easy
Unable to get Product ID - Honor 8
hassanjavaid8181 said:
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
Click to expand...
Click to collapse
My Honor 8 broke after it downloaded and installed the very first update. Since the failed 'update' I am NOT able to access Android at all. The phone was stuck on the Huawei eRecovery screen which fails to connect via wi-fi and is unable to connect or retrieve any information from the server to update and repair the phone. I was able to use a 'roll-back' package and install the stock firmware (FRD-AL10), but since I have done the roll-back and restored the stock firmware the phone boots to the first screen where you select your 'Region', then the 'Language', WiFi connection, Agree to the Terms & Conditions, then skip the following steps for Cloud and something else - after all this it goes back to the 'REGION' selection screen, then again the Language selection screen and so on - it just loops and never boots into Android.
Thus I am unable to get the Product ID, the unlock code, etc.
The phone is still locked and UNrooted as all the other solutions rely on the phone being UNlocked and Rooted - but since I DON'T have access to Android I cannot do anything with the phone.
Can someone help me to retrieve the Product ID from an essentially 'DEAD' Honor 8 phone??
---------- Post added at 06:47 PM ---------- Previous post was at 06:38 PM ----------
OG_Winzer said:
Thanks a lot for your help but I don't really know how but while I was trying to go back to the erecovery menu the phone just boot up and it worked. I did a factory reset because the phone was a bit laggy and now it works.
Click to expand...
Click to collapse
I have followed this 'dload' process to load the stock 'FRD-AL10 - ...C00B135' onto my Honor 8, it completes successfully then the phone reboots to where I have to select the Region, then Language, then WiFi, then agree to the Agreement, etc.. then the phone 'loops' back to the Region, Language, WiFi, selection and everything from start.
Is there a way to get past this 'loop' to the point where the phone actually boots into Android?? I cannot access the Product ID, unlock or root the phone.
Any help will be appreciated, thanks.
Hello.
I've read through the forums but am still quite unsure if i can restore my honor 6x from soft brick. It boots up but i get stuck in rescue mode if i have it charged Or it will just boot-loop if its not plugged in.
Im unable to use the DLOAD method. If i enter fastboot and use the three button method. I get put to the rescue screen. However i may be using the wrong firnware? Possibly.
Its a China version. PE-UL00 given to me from a friend, he said he had restored it to factory settings. So i wanted to upgrade the android kit kat to lollipop version. It was running emui 3. Kitkat 4.42. I believe updated the wrong firmware file through the local update method I download from firmware finder.
Basically from what ive read through the forums would i need to unlock the bootloader and flash stock firmware? . I have the information to acquire the bootloader key i believe and. I have downloaded honor multi tool and huawei multi tool, as well as adb drivers
I get confused as to which stock rom or. Firmware i should download or use. And i cant access the phone to see the build number. All i know is that it's. A China version. PINE-UL00. HONOR 6X. I do remember seeing
UL00_V100R001CHNC00B200 or similar when i was able to access the phone. But it also had custom at the bottom so i wasn't sure if it was a custom rom.
Any suggestions for a noob. Thankyou.
Pabloh14 said:
Hello.
I've read through the forums but am still quite unsure if i can restore my honor 6x from soft brick. It boots up but i get stuck in rescue mode if i have it charged Or it will just boot-loop if its not plugged in.
Im unable to use the DLOAD method. If i enter fastboot and use the three button method. I get put to the rescue screen. However i may be using the wrong firnware? Possibly.
Its a China version. PE-UL00 given to me from a friend, he said he had restored it to factory settings. So i wanted to upgrade the android kit kat to lollipop version. It was running emui 3. Kitkat 4.42. I believe updated the wrong firmware file through the local update method I download from firmware finder.
Basically from what ive read through the forums would i need to unlock the bootloader and flash stock firmware? . I have the information to acquire the bootloader key i believe and. I have downloaded honor multi tool and huawei multi tool, as well as adb drivers
I get confused as to which stock rom or. Firmware i should download or use. And i cant access the phone to see the build number. All i know is that it's. A China version. PINE-UL00. HONOR 6X. I do remember seeing
UL00_V100R001CHNC00B200 or similar when i was able to access the phone. But it also had custom at the bottom so i wasn't sure if it was a custom rom.
Any suggestions for a noob. Thankyou.
Click to expand...
Click to collapse
I downloaded dc unlocker, but it doesn't support the boot loader id for PE-UL00 honor 6x. Im still waiting on huawei for the bootloader code. I think k have to log in for 14 days consecutively? I keep getting that message when I try to unlock.
Also the firmware I tried to update it was PE-UL00C00361 OTA-MF from firmware finder.
I downloaded dc phoenix unlocker. Found the correct stock firmware to the best of my knowledge and the phone back to normal. After I was able to update to marshmallow through system updates.
Thank you anyway
Hi there ,
I`m new in on this kind of stuff and i have 1 problem.
My device is Huawei mate 8 , and last week i unlock bootloader and rooted with magisk.
After that i flash the Kangvip [Custom Rom] Huawei Mate 8 - NXT-L29C432B582 -Custom System Update - ("V.6"), but did not have google play,when i try to unnistall some apps the settings close,fingerprint not working so i decide to send my device to service .
Before flashing the Kangvip i have Android 7 with emui 5.0.1.
When i pick up my device from service it came with android 6 and emui 4 and some bugs,themes dont work and i`m missing emui 5 with android 7.
I try to update via settings/update but no updates there, try with hicare but no rezults there .
So i`m stuck on emui 4.
Is there any way to go back on emui 5 ?
Hi all...i dont have a Mate8 but have a Nova Plus...
ive tried helping TafN the way i do on mine...
we ve put the update.app from B200 firmware...
tried the usual method with stock recovery,didnt work......dialer method...didnt work
we ve tried flashin boot-recovery-system imgs via ADB/fastboot,NOTHING...phone get stuck on that orange nagscreen/menu.
no access to recovery / factory reset / ...... or other menu with key power on....
even couldnt access recovery by doin it with adb...
there must be a way to flash emui 5 huh ?
please help.....thanks
This is what i have in my device now
http://ibb.co/mWiTfn
Firmware Finder for Huawei
Find it on Playstore
Thats what I use to go from EMUI 4 to 5
mystik_khmer said:
Firmware Finder for Huawei
Find it on Playstore
Thats what I use to go from EMUI 4 to 5
Click to expand...
Click to collapse
Like Virusdunil sayd , we use firmware finder to find B200 and flash it in 2 ways,but no rezult,the phone remain stuck on booting screen.B320 was the close one to my B193
Solved at local service
Thanks
Stuck on EMUI 4.0
Mine doesn't have any OTA update either, tried FF method and also dload method. Nothing worked can anyone walk me through how to get an update?
bicboi69 said:
Mine doesn't have any OTA update either, tried FF method and also dload method. Nothing worked can anyone walk me through how to get an update?
Click to expand...
Click to collapse
Try here
https://forum.xda-developers.com/ma...-rom-huawei-mate-8-kangvip-rom-t3735081/page8
TaFN said:
Try here
https://forum.xda-developers.com/ma...-rom-huawei-mate-8-kangvip-rom-t3735081/page8
Click to expand...
Click to collapse
Its okayyy! My issue has been resolved lol i just had to dload a b330 firmware then the rest of the ota came flooding in ??
And I'm back again! Now with the aged old emui 5 problem, anyone found a way to disable auto dimming on chrome? Or forced it to run on Performance mode like we could back in emui 4? The chrome dimming doesn't really bother me too much but it happens in the middle of my Rules Of Survivor matches and starts lagging while dimmed. That's hella annoying ? really dont want all these effort of updating to emui 5 to go a waste n end up going back go 4.1 ??