Hello.
I've read through the forums but am still quite unsure if i can restore my honor 6x from soft brick. It boots up but i get stuck in rescue mode if i have it charged Or it will just boot-loop if its not plugged in.
Im unable to use the DLOAD method. If i enter fastboot and use the three button method. I get put to the rescue screen. However i may be using the wrong firnware? Possibly.
Its a China version. PE-UL00 given to me from a friend, he said he had restored it to factory settings. So i wanted to upgrade the android kit kat to lollipop version. It was running emui 3. Kitkat 4.42. I believe updated the wrong firmware file through the local update method I download from firmware finder.
Basically from what ive read through the forums would i need to unlock the bootloader and flash stock firmware? . I have the information to acquire the bootloader key i believe and. I have downloaded honor multi tool and huawei multi tool, as well as adb drivers
I get confused as to which stock rom or. Firmware i should download or use. And i cant access the phone to see the build number. All i know is that it's. A China version. PINE-UL00. HONOR 6X. I do remember seeing
UL00_V100R001CHNC00B200 or similar when i was able to access the phone. But it also had custom at the bottom so i wasn't sure if it was a custom rom.
Any suggestions for a noob. Thankyou.
Pabloh14 said:
Hello.
I've read through the forums but am still quite unsure if i can restore my honor 6x from soft brick. It boots up but i get stuck in rescue mode if i have it charged Or it will just boot-loop if its not plugged in.
Im unable to use the DLOAD method. If i enter fastboot and use the three button method. I get put to the rescue screen. However i may be using the wrong firnware? Possibly.
Its a China version. PE-UL00 given to me from a friend, he said he had restored it to factory settings. So i wanted to upgrade the android kit kat to lollipop version. It was running emui 3. Kitkat 4.42. I believe updated the wrong firmware file through the local update method I download from firmware finder.
Basically from what ive read through the forums would i need to unlock the bootloader and flash stock firmware? . I have the information to acquire the bootloader key i believe and. I have downloaded honor multi tool and huawei multi tool, as well as adb drivers
I get confused as to which stock rom or. Firmware i should download or use. And i cant access the phone to see the build number. All i know is that it's. A China version. PINE-UL00. HONOR 6X. I do remember seeing
UL00_V100R001CHNC00B200 or similar when i was able to access the phone. But it also had custom at the bottom so i wasn't sure if it was a custom rom.
Any suggestions for a noob. Thankyou.
Click to expand...
Click to collapse
I downloaded dc unlocker, but it doesn't support the boot loader id for PE-UL00 honor 6x. Im still waiting on huawei for the bootloader code. I think k have to log in for 14 days consecutively? I keep getting that message when I try to unlock.
Also the firmware I tried to update it was PE-UL00C00361 OTA-MF from firmware finder.
I downloaded dc phoenix unlocker. Found the correct stock firmware to the best of my knowledge and the phone back to normal. After I was able to update to marshmallow through system updates.
Thank you anyway
Related
Hi, I have a honor 8 that bootloops I can only access to fastboot not in bootloader or recovery. Bootloader is locked, i can't flash anything and i can't unlock it because I don't have the Product ID. The dload and three fingers method doesn't work. What can I try to unbrick it? I can't even turn it off.
OG_Winzer said:
Hi, I have a honor 8 that bootloops I can only access to fastboot not in bootloader or recovery. Bootloader is locked, i can't flash anything and i can't unlock it because I don't have the Product ID. The dload and three fingers method doesn't work. What can I try to unbrick it? I can't even turn it off.
Click to expand...
Click to collapse
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
When you say that the dload method doesn't work, what do you get when you try it ? You have to flash the proper firmware for your phone, otherwise it will deny it, you can maybe use a rollback package.
Try the Huawei tool ... U can fix it easily and you can play around don't panic it's the first thing ...
hassanjavaid8181 said:
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
Click to expand...
Click to collapse
I tried one firmware via dload but the phone doesn't even detect anything there isn't any error it just keeps rebooting. The firmware i need to install is FRD-L09C432B131.
Rayan19997 said:
When you say that the dload method doesn't work, what do you get when you try it ? You have to flash the proper firmware for your phone, otherwise it will deny it, you can maybe use a rollback package.
Click to expand...
Click to collapse
i just does nothing. not any errors or loading. The phone just keeps rebooting.
OG_Winzer said:
i just does nothing. not any errors or loading. The phone just keeps rebooting.
Click to expand...
Click to collapse
Maybe you are doing it wrong. As long as you have a stock boot.img and a stock recovery you should be able to use this method.
luisaet82 said:
Try the Huawei tool ... U can fix it easily and you can play around don't panic it's the first thing ...
Click to expand...
Click to collapse
If you mean Hisuite I already tried it. my PC detects the phone and hisuite launches by itself but then doesn't detect any phones. when I try the rescue tool "resuce mode enter..." appears on the screen but then hisuite says that the phone isn't compatible with the rescue mode.
OG_Winzer said:
If you mean Hisuite I already tried it. my PC detects the phone and hisuite launches by itself but then doesn't detect any phones. when I try the rescue tool "resuce mode enter..." appears on the screen but then hisuite says that the phone isn't compatible with the rescue mode.
Click to expand...
Click to collapse
I think he doesn't mean hisuite but Huawei multi-tool, which is available on xda forums and enable to recover from a brick
Envoyé de mon FRD-L09 en utilisant Tapatalk
Rayan19997 said:
I think he doesn't mean hisuite but Huawei multi-tool, which is available on xda forums and enable to recover from a brick
Envoyé de mon FRD-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
OG_Winzer said:
I tried one firmware via dload but the phone doesn't even detect anything there isn't any error it just keeps rebooting. The firmware i need to install is FRD-L09C432B131.
Click to expand...
Click to collapse
I asked firmware number because you cannot flash lowers firmware number after flashing higher firmware number..
You were on b131??
OG_Winzer said:
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
Click to expand...
Click to collapse
Alright I think this is a good point , now that you can use the dload method you need to know under which EMUI version you were because the phone won't accept a firmware that is lower or to high compared to your actual EMUI version.
What I did when I was in your case is flashing a rollback package downloaded from honor official site and then flash an old EMUI which is under Android 6.x.
After a few tries you can make it, I hope I've been clear, English isn't my native language
An investment in knowledge pays the best interest.
B.Franklin
Rayan19997 said:
Alright I think this is a good point , now that you can use the dload method you need to know under which EMUI version you were because the phone won't accept a firmware that is lower or to high compared to your actual EMUI version.
What I did when I was in your case is flashing a rollback package downloaded from honor official site and then flash an old EMUI which is under Android 6.x.
After a few tries you can make it, I hope I've been clear, English isn't my native language
An investment in knowledge pays the best interest.
B.Franklin
Click to expand...
Click to collapse
Thanks a lot for your help but I don't really know how but while I was trying to go back to the erecovery menu the phone just boot up and it worked. I did a factory reset because the phone was a bit laggy and now it works.
Lol everything's alright then
An investment in knowledge pays the best interest.
B.Franklin
OG_Winzer said:
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
Click to expand...
Click to collapse
Ok here i go ... Open the Huawei tool ... And follow steps to install TWRP ...turn of the phone , once it's off hold the volume button down then connect the phone to the PC that would take to some type of fastboot ! Flash recovery the 2 option .... Reboot into TWRP .. from the Huawei tool u would see and option of stock i think there u can copy the recovery OEM info system and boot option flash them all one by one .... Reboot the phone ... And you would be redirected to recovery from WiFi and now it would work since u flash the OEM info now the phone knows what to look for u won't get the getting info failed ... And that's it just makes sure u have a good stable WiFi connection ...
And like a said the more calm and relax u do these the better the first time I screw the phone I almost get a heart atack :crying: it's easy
Unable to get Product ID - Honor 8
hassanjavaid8181 said:
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
Click to expand...
Click to collapse
My Honor 8 broke after it downloaded and installed the very first update. Since the failed 'update' I am NOT able to access Android at all. The phone was stuck on the Huawei eRecovery screen which fails to connect via wi-fi and is unable to connect or retrieve any information from the server to update and repair the phone. I was able to use a 'roll-back' package and install the stock firmware (FRD-AL10), but since I have done the roll-back and restored the stock firmware the phone boots to the first screen where you select your 'Region', then the 'Language', WiFi connection, Agree to the Terms & Conditions, then skip the following steps for Cloud and something else - after all this it goes back to the 'REGION' selection screen, then again the Language selection screen and so on - it just loops and never boots into Android.
Thus I am unable to get the Product ID, the unlock code, etc.
The phone is still locked and UNrooted as all the other solutions rely on the phone being UNlocked and Rooted - but since I DON'T have access to Android I cannot do anything with the phone.
Can someone help me to retrieve the Product ID from an essentially 'DEAD' Honor 8 phone??
---------- Post added at 06:47 PM ---------- Previous post was at 06:38 PM ----------
OG_Winzer said:
Thanks a lot for your help but I don't really know how but while I was trying to go back to the erecovery menu the phone just boot up and it worked. I did a factory reset because the phone was a bit laggy and now it works.
Click to expand...
Click to collapse
I have followed this 'dload' process to load the stock 'FRD-AL10 - ...C00B135' onto my Honor 8, it completes successfully then the phone reboots to where I have to select the Region, then Language, then WiFi, then agree to the Agreement, etc.. then the phone 'loops' back to the Region, Language, WiFi, selection and everything from start.
Is there a way to get past this 'loop' to the point where the phone actually boots into Android?? I cannot access the Product ID, unlock or root the phone.
Any help will be appreciated, thanks.
Hello everyone, I need my help, I bought my Honor 8 in Gearbest, version AL-10 (Chinese), but I made the huge mistake in updating, and with that it was only on the screen of eRecovery, searching the internet I found some steps and I did it, but now my cell phone does not call anymore, it's only on the screen with the Blue Honor logo, I can not do anything else, I do not enter eRecovey anymore, I can only enter Fastboot mode, but the phone is locked, Unlock this mode, from what I read I need to unlock it, but I do not have the product id to complete the unlock process, does anyone have any light on how it could make him come back to life?
How do you get it back into eRecovery mode?
Thank you guys
Sorry my english, I do not have much knowledge of the language.
Rommco05 said:
Have you unlocked bootloader?
Click to expand...
Click to collapse
Hello my friend
yesterday I ended up getting
I used a program called DC Phoenix, it unlocks and makes the recording of the new firmware
But now I'm trying to find a correct firmware for my cell phone
He entered cross flash, I installed a version yesterday and when he came up he showed me another version.
Hi alisonduarte,
You bought a chinese model of Honor 8 (AL10). But, did it came with a AL10 firmware or, in most cases of imported models, a rebranded one. (L14 or L19 maybe).
Rebranded chinese models (AL00 and AL10) are known to bootloop with recent firmwares. The last working firmware, for my own rebranded AL00 phone, is B380.
I advise you to rebrand your AL10 to L19, with the help of this link: https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220 (L19 Firmware link is dead, another link here: https://mega.nz/#!ELQXnYgb!H7c0hCSIZ6N3ljMBm8JD21-aaNY3E-1JD0M99dntr7o)
Then update to B380 using "Firmware Finder for Huawei" app -or- "dload" folder method -or- RedLotus method. (For the last one: HiSuite 5.0.1.300 needed, download link here. Use this "filelist.xml" link for FRD-L19C432B380 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v77475/f2/full/filelist.xml)
Good luck! =)
"Your device has failed verification..." after Firmware Finder update [SOLVED]
Hello to everyone!!
I have a problem with my Honor 8, it is the FRD-L09 model firmware B394.
I installed Firmware Finder from Playstore and tried to downloaded the B402 version, it downloaded a lot of packages ota and then tried to install the update without success.
After that, when I turn on the phone, there is this message. If I push the power button the phone starts.
I don't know if it can be useful but if I go into fastboot mode the phone says: phone unlocked and frp locked, but I haven't unlock the bootloader. The phone is new, purchase from the honor site.
Thank you in advance!!
EDIT: I was able to resolve the problem with the rollback guide of huawei, flashing MM via dload!!
When you update with FF, I recommend to use the change DNS thing. Just for the future.
Days Tech said:
When you update with FF, I recommend to use the change DNS thing. Just for the future.
Click to expand...
Click to collapse
I used that option, I did this before on the honor of my friend without issues. I don't understand what happened
xxfraxx said:
I used that option, I did this before on the honor of my friend without issues. I don't understand what happened
Click to expand...
Click to collapse
You can try to reinstall EMUI on it. There is a guide called "back to emui from custom roms", which requires the openkirin twrp, though. Anyway, did you check that you have firmware access with IMEI?
Days Tech said:
You can try to reinstall EMUI on it. There is a guide called "back to emui from custom roms", which requires the openkirin twrp, though. Anyway, did you check that you have firmware access with IMEI?
Click to expand...
Click to collapse
Yes, I checked it before start the update
EDIT: Can I use the restore option into Hisuite?
When using either option, in System Update press the 3dot menu and select full package. This will download one large update rather than the multiple OTA files.
linkazoid said:
When using either option, in System Update press the 3dot menu and select full package. This will download one large update rather than the multiple OTA files.
Click to expand...
Click to collapse
I will do that, thanks!!
There is no way to fix this problem?
EDIT: I was able to resolve the problem with the rollback guide of huawei, flashing MM via dload!!
xxfraxx said:
Hello to everyone!!
I have a problem with my Honor 8, it is the FRD-L09 model firmware B394.
I installed Firmware Finder from Playstore and tried to downloaded the B402 version, it downloaded a lot of packages ota and then tried to install the update without success.
After that, when I turn on the phone, there is this message. If I push the power button the phone starts.
I don't know if it can be useful but if I go into fastboot mode the phone says: phone unlocked and frp locked, but I haven't unlock the bootloader. The phone is new, purchase from the honor site.
Thank you in advance!!
Click to expand...
Click to collapse
Typically you get this problem when you install an update without locking the bootloader.. This happened with me couple of weeks back.. I think happens, cos during the process of the update the bootloader gets locked, but it doesnt come up on the fastboot (donno why)
I just unlocked the bootloader using the OEM code and voila it worked... I was able to get ride of this message as well as root the phone.. Do try and let me know!
@kishorev
have you asked OEM code from huawei site?
Hnktc said:
@kishorev
have you asked OEM code from huawei site?
Click to expand...
Click to collapse
Yes the bootloader unlock code..
Has anybody got luck in finding Indian stock firmware for View 10 ? I am on Lineage OS and since it lacks a lot of features and perfection, I want to return back to Indian Stock OS.
Please help !!!
On Google play there is an app called Huawei firmware finder
On that there's 2 updates... Don't see full ota files though.
Yes I know that. In no way we can find system.img in them. I wonder how come huawei is not updating the firmware finder with their database. Looks its just intentional and similar to their tantrum when you ask a bootloader unlock code.
Maybe someone has a Stock twrp backup with the system.img for you.
That's the only option for you at the moment
Just got a response from honor
They took my info including imei
They are checking why I haven't gotten any updates
The EU honor site is checking
I'll post any help for the c675 ver
Soon as I can.
Sent from my BKL-L09 using XDA Labs
Download link - https://drive.google.com/file/d/1_Boc9uk2CwrHzBgE-ljexntxuac9GOs0/view
Unzip it and then TWRP restore. Do not flash it
Bro, I assume this is the one I got last night. I restored in TWRP, but after that, there is no sim detected. Now I'm on stock with no sim detected and imei shows null. If I try to flash twrp or custom rom now through fastboot, it says command not allowed. Please help me with getting back a stock working device.
File not extracting. it may be corrupted
I got the link from other post. There someone mentioned it worked for them except modem drivers
Well never mind.. They referred me to the India office and said they can't support this model
Wowway. Sucks worst company out there
It seems I'm on the same boat as you were. Can you tell me how you really got back from lineage OS because I really can't figure out a way to do that. Please help me out of this custom skin, oreopie!
Hello guys, can somebody help me?
I own a Honor 6x (BLN-TL10)
When I bought at 2017, I flashed my firmware to a different one cause I didn't wanted to use the chinese version, so I upgraded or downgraded to that firmware (BLN-C900B131) since that change, my device always recognize as hi6250, and when I try to install the original firmware on my device, It fails, on the update proccess appear that message, "Software install failed! Incompatibility with current version." cause I want to upgrade to 8.0 oreo, my phone right now is at android 6.0 emui 4.1.
Can you send the link of update file that you have used? And a screenshot of build number?
I'll attach 3 screenshoots, one of my EMUI and Android at the moment and the firmware's that I tried to install
The BLN-TL10 firmware that was the same that came with my phone when I bought
I've tried to unlock the bootloader, but Huawei phones bought on china doesn't have OEM unlock option enabled ;(
Idk if have some way to unlock bootloader without that option