Database Info

[Q] Odin3 not reconnizing my phone.

I recently bricked my phone and i was trying to use GTG's ultimate unbrick to unbrick it. I boot up odin as an administrator and then I put my phone in download mode. After that i waited for odin to recongnize my device, but it doesnt. I do have the infuse drivers installed. I dont know what else to do. Can anyone help?

Zach4G said:
I recently bricked my phone and i was trying to use GTG's ultimate unbrick to unbrick it. I boot up odin as an administrator and then I put my phone in download mode. After that i waited for odin to recongnize my device, but it doesnt. I do have the infuse drivers installed. I dont know what else to do. Can anyone help?
Click to expand...
Click to collapse
Ok relax ive had that problem before, and theres a few options.
1.- Did you installed Heimdall drivers? Because if you did you have to revert them so Odin can recognize the phone, if you didnt then ignore this point.
2.- The Odin provided on this link usually worked for me: http://www.mediafire.com/?8rf8jo1r8kw88ql (property of h8rift all credit to him heres his whole post: http://forum.xda-developers.com/showthread.php?t=1092021&highlight=stock)
3.- You can use AdamOutlers One click back to stock package wich will simplify a lot the process: http://forum.xda-developers.com/showthread.php?t=1331381&highlight=stock
Its a self executable file that will do all the work for you.
Surely one of those will solve it

Thanks so much, i really apreciate this. If you had a pay pal i would have surely donated. I will let you know how it goes.

nothing is working, im panicing!

[Q]Galaxy Fit brick

Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.

you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked

n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.

Can you come in recovery?
Press Power On + Home Button at once

If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.

viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.

cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences

have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!

djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.

may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....

I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u

vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.

ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems

viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!

vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.

ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...

vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:

Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....

vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..

vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.

Hard bricked android Pls help.

Hi i just hard bricked my samsung galaxy core i8262. trying to flash custom kernel make it hard bricked. now i can't turn it on, can't boot to recovery and into the downloading mode. when i try to turn it on or do the combo buttons (keys) to recovery or download mode it only vibrates. BUT when i try connecting my hard bricked samsung to computer it is recognized by computer AND When I install odin and see if the odin detects it well YES it detects my phone. and now I just want to know if i can still flashed my stock firmware to my bricked phone with the odin even if my phone is not in downloading mode? or does usb jig can work it on to downloading mode? ( i dont have usb jig so i dont know yet if it will work on my phone) i didn't yet try flashing my stock firmware using the odin cause im afraid that it will get super hard bricked. Help.

Little Einstein said:
Hi i just hard bricked my samsung galaxy core i8262. trying to flash custom kernel make it hard bricked. now i can't turn it on, can't boot to recovery and into the downloading mode. when i try to turn it on or do the combo buttons (keys) to recovery or download mode it only vibrates. BUT when i try connecting my hard bricked samsung to computer it is recognized by computer AND When I install odin and see if the odin detects it well YES it detects my phone. and now I just want to know if i can still flashed my stock firmware to my bricked phone with the odin even if my phone is not in downloading mode? or does usb jig can work it on to downloading mode? ( i dont have usb jig so i dont know yet if it will work on my phone) i didn't yet try flashing my stock firmware using the odin cause im afraid that it will get super hard bricked. Help.
Click to expand...
Click to collapse
Ok so I had a similar problem with my samsung phone as well where i couldnt go into download mode. So i pretty used the download mode combo(it wasnt in download mode). I just flashed stock firmwere and apparently it worked and you said odin was recognizing it so the best bet is to flash stock firmware via odin even if its not going to download mode
Hope i helped you

Little Einstein said:
Hi i just hard bricked my samsung galaxy core i8262. trying to flash custom kernel make it hard bricked. now i can't turn it on, can't boot to recovery and into the downloading mode. when i try to turn it on or do the combo buttons (keys) to recovery or download mode it only vibrates. BUT when i try connecting my hard bricked samsung to computer it is recognized by computer AND When I install odin and see if the odin detects it well YES it detects my phone. and now I just want to know if i can still flashed my stock firmware to my bricked phone with the odin even if my phone is not in downloading mode? or does usb jig can work it on to downloading mode? ( i dont have usb jig so i dont know yet if it will work on my phone) i didn't yet try flashing my stock firmware using the odin cause im afraid that it will get super hard bricked. Help.
Click to expand...
Click to collapse
Did your Rom countain" CSC" if Not, Try to find one with CSC File
Good Luck

falconscrest123 said:
Ok so I had a similar problem with my samsung phone as well where i couldnt go into download mode. So i pretty used the download mode combo(it wasnt in download mode). I just flashed stock firmwere and apparently it worked and you said odin was recognizing it so the best bet is to flash stock firmware via odin even if its not going to download mode
Hope i helped you
Click to expand...
Click to collapse
I just tried it but sadly didn't work. odin still detects my phone but when i starting flasing the firmware (clicking start button) it doesn't running. btw thanks.

delliverance said:
Did your Rom countain" CSC" if Not, Try to find one with CSC File
Good Luck
Click to expand...
Click to collapse
what is csc file? i googled it but i didn't really know what it does. is it debrick image? cause im seaching here on xda and see some post that using debrick image to boot phone using sd card. please need help. tnx

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%

How to unbrick a hardbricked gts7582 (boot dead)

I need some help with fixing a dead boot gts7582. Its was first flashed by a rom not meant for it and now its totally screwed up.
Its doesnt show any sign of life... No recovery, no download mode, not charging, wont boot up or anything. I googled it up found out i had a corrupted preloader and hence its doesnt get detected by my pc {i have installed the drivers and tried sp flash tools and failed). Could anyone please help me with this, I'm all ears to anything. thanks

daz_61 said:
I need some help with fixing a dead boot gts7582. Its was first flashed by a rom not meant for it and now its totally screwed up.
Its doesnt show any sign of life... No recovery, no download mode, not charging, wont boot up or anything. I googled it up found out i had a corrupted preloader and hence its doesnt get detected by my pc {i have installed the drivers and tried sp flash tools and failed). Could anyone please help me with this, I'm all ears to anything. thanks
Click to expand...
Click to collapse
There may be a few days to bring it back to life (like JTAG), but otherwise you're stuck with this brick
Sent from my Redmi 4A using XDA Labs

DodoGTA said:
There may be a few days to bring it back to life (like JTAG), but otherwise you're stuck with this brick
Sent from my Redmi 4A using XDA Labs
Click to expand...
Click to collapse
Jtag requires professionals right?
So, any other way? like the test point method for mtk devices? any hope there?

s7582
any update for this same problem here