Database Info

Screwed something up, HELP needed please

Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!

There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:

OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse

Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%

S Duos Hard brick?

Hi guys, so my friend gave me an S Duos to fix it, as he bricked it while flashing a recovery (don't know how). Now the phone doesn't show any signs of life, except odin can detect it even while the battery is REMOVED, no need to go to download mode odin detects it. But odin doesn't flash it, it gets stuck at SetupConnection. Anyone know what to do here?

xddxd said:
Hi guys, so my friend gave me an S Duos to fix it, as he bricked it while flashing a recovery (don't know how). Now the phone doesn't show any signs of life, except odin can detect it even while the battery is REMOVED, no need to go to download mode odin detects it. But odin doesn't flash it, it gets stuck at SetupConnection. Anyone know what to do here?
Click to expand...
Click to collapse
WTF !!!! my phone is bricked too but odin does not detect my phone !

xddxd said:
Hi guys, so my friend gave me an S Duos to fix it, as he bricked it while flashing a recovery (don't know how). Now the phone doesn't show any signs of life, except odin can detect it even while the battery is REMOVED, no need to go to download mode odin detects it. But odin doesn't flash it, it gets stuck at SetupConnection. Anyone know what to do here?
Click to expand...
Click to collapse
you've already installed drivers?

mois2511 said:
you've already installed drivers?
Click to expand...
Click to collapse
Well yes I've flashed many Samsungs on that PC.

A51 accidently flashed the wrong firmware, now doesnt even boot into dowload

I was trying to flash the official firmware again on my a51 but i accidently put the a20e on it, i was distracted, i have almost 30gb of different firmware downloaded and i chose the wrong one by distraction... i feel so stupid right now... this never happened to me before... what should i do? is there any way to fix it? even if i have to buy a new piece of hardware of storage or wtv piece i need to replace
Thank you in advance to whoever is able to help me

Use Fastboot, i guess it will help

Assabtigle said:
Use Fastboot, i guess it will help
Click to expand...
Click to collapse
Doesnt work, the device is completely dead.. so neither bootloader, neither download mode, neither fastboot will work..
I have been researching about EDL mode (emergency download mode) and its the only thing i managed to do, by shorting the testing points of the device.
But i dont know what tool should i use while on EDL mode, odin doesnt read my device on edl mode

I also don't know about it, YET

Drvaggensberg said:
Doesnt work, the device is completely dead.. so neither bootloader, neither download mode, neither fastboot will work..
I have been researching about EDL mode (emergency download mode) and its the only thing i managed to do, by shorting the testing points of the device.
But i dont know what tool should i use while on EDL mode, odin doesnt read my device on edl mode
Click to expand...
Click to collapse
Have you tried smart switch ?

Im gonna try that, didnt know that had a firmware flashing feature.
I hope it works with EDL

peter couniaz said:
Have you tried smart switch ?
Click to expand...
Click to collapse
It didnt work, that tool its not for flashing that way.

I need help with an old samsung galaxy mini GT-S5570

Hello. i think i bricked my phone by trying to update from micro sd with an update for a different version. It can only go into download mode and recovery mode. I treid to follow other guides using Odin to try and fix it but when i connect the phone in download mode to the PC, Odin does not register this. There is nothing wrong with the cable or USB port either. The phone does register though in recovery mode, but nothing happens during this. Please let me know what I should do.
edit: another thing, i also tried using samsung kies to do the same thing, but the phone gets stuck on connecting and doesnt go any further
also, is it actually possible for this phone to run android 4.0+? or did I just ruin a perfectly good phone.
Thanks, adz09

was time to send it to rest, btw did you try installing samsung smart switch then use odin to try to flash the firmware?

tutibreaker said:
was time to send it to rest, btw did you try installing samsung smart switch then use odin to try to flash the firmware?
Click to expand...
Click to collapse
no i have not yet tried samsung smart switch, can you send a link?