hello guys i convert my moto g xt 1033 to GPE to flash miui , i also flash miui rom , but due to some bugs in ROM i want to go back to my stock Indian 5.1 LP so goto recovery and format system then copy my nandroid back from PC to phone then try to restore ,restore completed but phone struck at boot loader unlock warning .pllzzzzz help guys ...please
This might be your answer http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
You might want to flash the GPE build because you converted your phone to the Google play edition
Thanks ...I got it ..😊
Related
http://www.mediafire.com/download/4oh7s53da552hum/clockworkmod.7z
WARNING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
READ
I HAVE NOT TESTED THIS, READ THISSSSSSSSSSSSSSS
i don´t know if this can be useful for anybody? i am not really sure if someones needs this but well, there you go
THIS WILL NOT UNBRICK OR REVIVE YOUR BRICKED MOTO G
AFTER RESTORING IT WILL ASK FOR A PASSWORD OR KEY, THAT IS BECAUSE OF THE PARTITION MESS CREATED IN 444 AND 442 AND STOCK MOTO G VS TRUE MOTO G GPE
i am not responsible if it does not work for you, i could not test this, i am just uploading the files for a nandroid backup i did with philz 6.47.7 for a fresh format 4.4.4 GPE (converted from regular moto g)
THE REASON I DID THIS, WAS WITH THE HOPE OF USING IT ON MY OTHER BRICKED MOTO G AFTER A BAD OTA FLASH, OR MAYBE SOME DEV CAN USE THIS FOR CREATING SOMETHING
-----------------------------
this is a nandroid backup of a regular non gpe moto g xt1032 16gb global gsm, converted to 4.4.2 GPE, then updated via OTA to 4.4.4 with stock recovery
after OTA update everything was working perfect, then i installed philz recovery, wiped user data and cache, then i did make the nandroid backup using philz, compressed using 7zip and and uploaded the file
usage:
-decompress the file somewhere
-put the folder clockworkmod on the phone
-using a custom recovery you can restore but it will not work on bricked phones, i don´t know if it will work on working 4.4.4 phones
----------
i have another moto g bricked for an incorrect ota install, sadly i can´t use this since my partitions are messed up, and there is no way that i know to upload a folder via fastboot
After backup it asks for a password...
To use this; 'userdata' must be formatted to EXT4 - in other words, you need to have already have flashed the GPE fastboot firmware image including partition table. Otherwise you will get an encryption message (asks for password.) If the 4.4.4 GPE Kernel is needed, it's available here:
http://forum.xda-developers.com/showthread.php?t=2649763
Thnks Dude ... usefull :good::good::good::good::good::good::good:
unable to to mount sdcard when using philz on fresh install of stock 4.4.2 plzzz help
lost101 said:
To use this; 'userdata' must be formatted to EXT4 - in other words, you need to have already have flashed the GPE fastboot firmware image including partition table. Otherwise you will get an encryption message. If the 4.4.4 GPE Kernel is needed, it's available here:
http://forum.xda-developers.com/showthread.php?t=2649763
Click to expand...
Click to collapse
Thanks, i will try this.
If I'm on CrDroid
I want to convert my xt1033
To xt1032 (single sim)
Can I restore this ?
I don't have PC and I need to convert it don't have any option.
I am MSIM pure xt1033
psycho46 said:
After backup it asks for a password...
Click to expand...
Click to collapse
Same here..What password? Can not continue without password :crying:
nl2008 said:
Same here..What password? Can not continue without password :crying:
Click to expand...
Click to collapse
See post #3.
1.flash RETAIL-BR-DS_4.4.3_KXB21.14-L1.32_30_cid12_CFC_1FF.xml
2.reboot recovery install Blur_Version.210.12.32.falcon_umtsds.Brasil.en.BR-1
http://fs2.filegir.com/mohamad/RETAIL-BR-DS_4.4.3_KXB21.14-L1.32_30_cid12_CFC_1FF.xml.zip
http://fs2.filegir.com/mohamad/Blur_Version.210.12.32.falcon_umtsds.Brasil.en.BR.zip
sorry guys if it does not work
as i said i could not test this
my current moto g is bricked waiting for 444 images
and the moto g i used to create this nandroid backup was sold
i just uploaded the nandroid in case someone could use it for developing or something else, or help me un brick my phone
hi could you please share a nandroid backup of 4.4.4 us retail
I want to try it but I don't have a wifi connection and through my mobile internet I cannot ota because of my data limitations.
Please can anyone provide the full backup of 4.4.4 retail US Global GSM
Falcon G said:
hi could you please share a nandroid backup of 4.4.4 us retail
I want to try it but I don't have a wifi connection and through my mobile internet I cannot ota because of my data limitations.
Please can anyone provide the full backup of 4.4.4 retail US Global GSM
Click to expand...
Click to collapse
i believe there is no 444 for stock moto g non gpe
---------
bte i could unbrick my moto g using some guy method and german cwm backup, i tested my file from this post and yes it ask for a password, because partitions are a mess
stupid people who changed partitions in gpe and stock moto, really, who was the genius, let me congratulate that awesome person
hi guys
i made this post
http://forum.xda-developers.com/moto-g/help/believe-to-unbrick-moto-g-bricked-boot-t2809373
it is kinda the same, but it has the cwm in a zip
I got this restore by format /data directory to EXT4 via openrecover-twrp-2.7.7.1-xt1032 but NO network at all....Cant even recognised the simcard anymore..I've tried to flash stock modem from xt1032 still not working....Phone useless now without simcard....anyone got any solutions, pls share. My phone orig xt1033 convert to gpe xt1032 then ota 4.4.4 and soft brick when downgrade to gpe 4.2.2
Hello
Im using CDMA Moto G XT1031.
I have tried every possible way to go back stock but the phone refuses. Even stock recovery will not show the red exclamation mark and continuous bootloops.
I have tried TWRP but no luck. Only Philz works, so I tapped Clean to install new ROM and flashed CM 11 Nightly via USB OTG (because sideload was not working however fastboot works)
Now even CM refuses to start and throws me back to recovery.
Please help
Thanks
ngr.hd said:
Hello
Im using CDMA Moto G XT1031.
I have tried every possible way to go back stock but the phone refuses. Even stock recovery will not show the red exclamation mark and continuous bootloops.
I have tried TWRP but no luck. Only Philz works, so I tapped Clean to install new ROM and flashed CM 11 Nightly via USB OTG (because sideload was not working however fastboot works)
Now even CM refuses to start and throws me back to recovery.
Please help
Thanks
Click to expand...
Click to collapse
i'm having same problems just like you...i'm on xt1032 o2 germany 4.4.2 with unlock bootloader when this problems begin,..
my problems solved when i'm flash my moto g with a sbf retail who has 4.4.4 kitkat update,..i'm flash my o2 german with germany retail 4.4.2 and then install philz recovery,and update with 4.4.4 german retail using sideload/usb otg and my moto g was back on the track..
but there's one problems,if i'm turn on my moto g normally he will booting to recovery..so i had go to bootloader mode and choose normal power up (option no.1) to normally booting.
mt021322 said:
i'm having same problems just like you...i'm on xt1032 o2 germany 4.4.2 with unlock bootloader when this problems begin,..
my problems solved when i'm flash my moto g with a sbf retail who has 4.4.4 kitkat update,..i'm flash my o2 german with germany retail 4.4.2 and then install philz recovery,and update with 4.4.4 german retail using sideload/usb otg and my moto g was back on the track..
but there's one problems,if i'm turn on my moto g normally he will booting to recovery..so i had go to bootloader mode and choose normal power up (option no.1) to normally booting.
Click to expand...
Click to collapse
But is it safe to flash a GSM image on CDMA just to revive it from virtually dead since factory recovery is also not working, only Philz works?
ngr.hd said:
But is it safe to flash a GSM image on CDMA just to revive it from virtually dead since factory recovery is also not working, only Philz works?
Click to expand...
Click to collapse
the point is that you must flash your moto g with a higher android version from what your moto g installed,...example if you have this problem on 4.3 so you must flash 4.4.2 or 4.4.4 and if on 4.4.2,so flash with 4.4.4..if for this time 4.4.4 update for cdma moto g was not yet available,i think u must wait until 4.4.4 update's coming.
i think cdma and gsm img is a different.
Hi all,
a couples of weeks ago i converted my italian moto g to GPE using Moto Tools, now i want to go back and flash again the rom i want (for example cyanogenmod 11)
how i do this?i've read that many people brick the device when they try to go back so i want to be sure of the tinghs to do before trying
i even have a backup of my stock rom but the recovery partition size is the same?i can just use the cwm backup& restore?
hi guys i've coming back from gpe ,i used the XT1032_RETAILSL-EU_4.4.4_KXB21.14-L1.40_39_cid7_CFC_1FF.xml.zip the phone boot up but now i have the continous popup of "com.android.phone has stopped working" i cannot even copy another rom anyone have a workaround? maybe i've used the wrong retail rom..
any suggest?
It sounds like you haven't done the fastboot flash correctly. Try to do the final command: fastboot erase userdata - (WARNING: this will wipe any photos, music etc.)
Guide: http://forum.xda-developers.com/showthread.php?t=2542219
Do all the commands manually, and report back any errors.
FYI, that firmware image you have downloaded is the SIM-Locked version, while it should not be the cause of your issue, here is the non SIM-Locked version: http://forum.xda-developers.com/showthread.php?p=54757500&highlight=retail+eu#post54757500
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Hi,
Thanks for using XDA Assist Please Standby when we move your post here Moto G Help and Troubleshooting
Good Luck!
Did you try manually flashing each partition using fastboot commands?
answer
jacobjake said:
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Click to expand...
Click to collapse
go on youtube type in how to adb sideload a rom on moto g that video will fix your problem well it did for me GoodLuck
Is recovery installed? Are the Moto drivers installed on your pc?
I've been through something similar before and whenever I accidentally wipe the OS, I just connect then flash another rom usually starting from here http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and it will pop up under "my computer" where you can copy and try to flash your rom again. I assume it's the same with 5.0+ (I'm still on 4.4)
Which method did you use to flash lollipop?
Hi,
i have moto g xt1032 GPE edition , tried to flash custom roms i got boot loop . don't have any backup also. Again flashed gpe stock firmware i got bootloop . can any one help me how can i unbrick my phone.
Thanks,
Mahesh
https://www.google.it/url?sa=t&sour...ggcMAA&usg=AFQjCNGLhmQOi2X79dhjpL5WpNJF2AWvIw
Install this program and run install gpe 5.1
But after: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481