Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Hi,
Thanks for using XDA Assist Please Standby when we move your post here Moto G Help and Troubleshooting
Good Luck!
Did you try manually flashing each partition using fastboot commands?
answer
jacobjake said:
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Click to expand...
Click to collapse
go on youtube type in how to adb sideload a rom on moto g that video will fix your problem well it did for me GoodLuck
Is recovery installed? Are the Moto drivers installed on your pc?
I've been through something similar before and whenever I accidentally wipe the OS, I just connect then flash another rom usually starting from here http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and it will pop up under "my computer" where you can copy and try to flash your rom again. I assume it's the same with 5.0+ (I'm still on 4.4)
Which method did you use to flash lollipop?
Related
Hello,
I have bricked my Moto G XT1033 after i wiped out all data and system files.
I had saved a recovery image and after wiping out i can't see it anymore.
since i'm a noob in this can someone help me out ?
Thanks
If you wiped system, you have no OS, so your phone can't boot up.
Since Moto G has no external memory and you wiped data, all of your stuff including your backup was gone.
You need to reflash firmware.
Take a look in Original Development threads.
thewerthon said:
If you wiped system, you have no OS, so your phone can't boot up.
Since Moto G has no external memory and you wiped data, all of your stuff including your backup was gone.
You need to reflash firmware.
Take a look in Original Development threads.
Click to expand...
Click to collapse
Thanks alot
Fixed it with by installing the stock firmware
How to install it?
i had the same problem and i am searching for help please answer this question is an emergency
I am unable to flash stock firmware.
I am getting a error " Package expects build fingerprint of Motorola falcon_asia_ds/falcon+umtsds: 5.0.2/LXB22
This device has motorola/falcon+asia_ds/falcon_umtsds: 4.4.2/KX
Please suggest right rom to flash.
I am rooted with boot loader unlocked and using Clockwork mod recovery v 6.0.4.7
I can access recovery.
aumshethia said:
I am unable to flash stock firmware.
I am getting a error " Package expects build fingerprint of Motorola falcon_asia_ds/falcon+umtsds: 5.0.2/LXB22
This device has motorola/falcon+asia_ds/falcon_umtsds: 4.4.2/KX
Please suggest right rom to flash.
I am rooted with boot loader unlocked and using Clockwork mod recovery v 6.0.4.7
I can access recovery.
Click to expand...
Click to collapse
Access Bootloader Flash latest version of twrp on ur device connect to pc Via MTP mode nd transfer ur rom to it and flash it
Hi I managed to flash 4.4.4 rom and everyting worked fine
Now i did OTA update and after OTA completed installing, the moto g went blank... completely dead.
Please help how can i get my bootloader back ??
[Q&A] [TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore App
Q&A for [TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore Apps[v3.1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL] MotoTool AIO(GPE,NON-GPE)Root,Recovery,Record,Relock,Backup-Restore Apps[v3.1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
alonsoch said:
ISSUES
Code:
*None, waiting for one..
CHANGELOG
Code:
09/03/14
*Size of the tool now is approx 55 mb
*GUI updated
*Added the function for download recovery
*Added SysTab
*New Code
23/02/14
*Added the function to relock the bootloader(status code:2)(only tested on native GPE)
21/02/14
*Updated TWRP for NON-GPE devices (2.6.3.2, touch is fixed thanks to @dhacker29)
*Updated CWM Advanced Edition for NON-GPE devices(6.13.9)
*Updated CWM Advanced Edition for GPE devices(6.13.9)
*Added CWM Swipe(6.0.4.7, thanks to @dhacker29)
16/02/14
*Updated Ui for the panel drag and drop(install .apk)
*REMOVED restore function for NON-GPE firmware, sorry for this guys.. :(
15/02/14
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk using drag and drop
12/02/14
*Fixed Restore Function on NON-GPE... all should work perfect..
10/02/14
*Added [CWM Advanced Edition] PhilZ Touch for KitKat
*Added [CWM Advanced Edition] PhilZ Touch for GPE
* Added CWM 6.0.4.6 for KitKat
*Added TWRP 2.6.3.1
*Added CWM and TWRP for JellyBean
*Added CWM 6.0.4.6 for GPE
*Added SuperSu 1.93
GPE FIRMWARE
Code:
[COLOR="Red"]REMEMBER EXTRACT YOUR FIRMWARE AND COPY ALL THE FILES TO GpeImage/ [/COLOR]
[URL]https://mega.co.nz/#!3dZB1YAR!Yd6J9Yg_rtSgSpAY8_ZyKJXtweiCzhkevlvKwnEfFN0[/URL]
Any mirror is welcome :D
HOW RESTORE MY DEVICE TO NON-GPE FIRMWARE
Code:
Well, i have removed this function for my tool because the new firmwares don't include the .bat file, so if you want restore your device please go to this thread
[URL="http://forum.xda-developers.com/showthread.php?t=2542219"]Restore NON-GPE firmware[/URL]
Q&A
-Why i don't have signal when i convert to GPE?
Well this is a know issue to fix it flash your stock fsg, don't know how? don't worry.. copy your stock fsg and put it in the tool folder, then press shift+right click and select open window promp here and paste the next code one by one:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
-I have done the previous steep and continue without signal!!
well, please go to this thread and flash your respective radio via recovery Flash radio using recovery
-Why i can't boot to recovery?
Remember in fastboot mode VolUp SELECT and VolDown SCROLL
-Why i can't install an apk using your tool?
Well, be sure that the apk name don't have spaces, and check if the path of your apk have spaces too... i suggest that: rename your apk (simpler name) EX. xxxxxx.apk (where xxxxx are the name) and move your apk to the desktop, then try again..
-How can i say thank you?
Just press the THANKS BUTTON
Click to expand...
Click to collapse
Would it be possible to use mototool to convert a moto g running Paranoid Android to GPe?
I have flash stock recovery for kitkat on my moto g dual sim asian retail, and some thing hapen. When i go to recovery mode its say "no command" with a green android picture.
Can you tell me whats going on my device? I cant acces my stock recovery.
May be some one can help me with this situation, thx before for your help
ficki yahya said:
I have flash stock recovery for kitkat on my moto g dual sim asian retail, and some thing hapen. When i go to recovery mode its say "no command" with a green android picture.
Can you tell me whats going on my device? I cant acces my stock recovery.
May be some one can help me with this situation, thx before for your help
Click to expand...
Click to collapse
That is the stock recovery, just a green android
And Lollipop?
Will this be updated for flashing Lollipop?
HappyNacho said:
Will this be updated for flashing Lollipop?
Click to expand...
Click to collapse
yes!
I converted to GPe (My moto G was normal) months ago WITH THIS TOOL. All great.
Then flash Aero Kernel. Now I want to go back to the GPe converted stock kernel. So I can received the update when It comes to out.
Where can I get this GPe converted kernel? How can I flash it?
Recovery Flash not working
Whenever I try loading my custom recovery after flashing, I get a black screen! Halppp
YungAndroidUsar said:
Whenever I try loading my custom recovery after flashing, I get a black screen! Halppp
Click to expand...
Click to collapse
try flashing it via fastboot. You will find the recovery MotoToll All in one/Data/KitKat
you only need to enter fastboot and type on a cmd fastboot flash recovery file.img
Hi su,
i also tried to Convert my XT1039 to GPE, with the same error, but apparently it worked anyway, since after that the regular start screen showed and the LED flashed white on starting the device.
But i was still stuck in the same bootloop as you.
I then flashed a complete 4.4.4 Retail .zip piece by piece via fastboot.exe according to the instructions in this thread: http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619. Then the phone finally worked
Good luck,
Grey_haze
Obsolete
Please tell me if I can use both SIM cards in XT1033 after I convert it to GPe
I'm completely new to Android and Flashing ROM.
I search a lot on web but did not find a perfect answer.
Could anyone please tell if I can use both Sim cards in XT1033 after I convert it to google play edition?
I need both sim cards for my day to day calling
Thanks in advance!!
I'm trying to use MotoTool AIO...
X.Mad.Max.X said:
I'm completely new to Android and Flashing ROM.
I search a lot on web but did not find a perfect answer.
Could anyone please tell if I can use both Sim cards in XT1033 after I convert it to google play edition?
I need both sim cards for my day to day calling
Thanks in advance!!
I'm trying to use MotoTool AIO...
Click to expand...
Click to collapse
We can use only one sim.
The reason why I would like to change it to Gpe, is because MotoCare, Assist, Alert etc apps from Motorola just consume a lot of battery. I tried to remove these apps but I can't completely remove them.
I need some help with the Moto tool:
1. What is recovery? (Flash stock recovery, fastboot etc., what and when we should use these?)
2. What is Stock recovery? (I'm using KitKat 4.4.4, can I use original google kitkat without Motorola applications?)
3. Can someone provide a link to understand the basics of Android firmware flashing?
I'm a computer engineer and worked on vc++ but I'm completely new to Android
Thanks in advance!
Can I use mototool for GPE 4.4.4? Or has it to be 4.4.2 as the description provided that version.
I had some problem flashing to GPE 444 from Cyanogen 11. It asked for a password to decrypt my phone.
So I flashed it to motorola stock 444, lucky for me it worked.
Has anyone had any luck converting their XT1045 to a stock GPE ROM? During the flashing I get errors "hab check failed for boot" and "hab check failed for recovery" then a boot loop at the unlocked GPE boot screen.
can this be used for lollipop
will this tool work for lollipop 5.0.2
Help!
I tried 'Flash stock recovery' but in the phone it says partition size mismatch.And fails.Help! :/
I have a second Moto G (2013 version). Could I convert that one into a GPE edition and then receive lollipop OTA update? I think the OTA update is out since like a couple months for the GPE version. Any ideas? Also thanks a lot for this, it's a great tool!
Hi,
I want to root an XT1045. ¿Will this tool work with (XT1045) or only in 102X and 103X versions?
Thanks.
Can i root my moto g xt1033 with lollipop 5.0.2 with this tool ?
Thanks a lot!
i got this error while updating. pleASE HElp
danishajaz said:
i got this error while updating. pleASE HElp
Click to expand...
Click to collapse
You have to be complete stock, no root, stock recovery and kernel.
Unrooting and flashing the stock recovery and kernel will NOT work,
you will need to flash the 4.4.4 firmware first.
AgentChaos said:
You have to be complete stock, no root, stock recovery and kernel.
Unrooting and flashing the stock recovery and kernel will NOT work,
you will need to flash the 4.4.4 firmware first.
Click to expand...
Click to collapse
I did flash it to stock ROM but still it showed signature verification failed and some root error. BTW I still have cwm not the original recovery !!
well apparently you dont clearly read the guides,you cant install official updates with custom recovery, you need everything original stock and no root. read the guides first before posting
AgentChaos said:
well apparently you dont clearly read the guides,you cant install official updates with custom recovery, you need everything original stock and no root. read the guides first before posting
Click to expand...
Click to collapse
I downloaded stock ROM from here. But I guess it has cwm recovery image not the original.
If u could point me to pure stock ROM moto g Indian Asian version first gen
danishajaz said:
I downloaded stock ROM from here. But I guess it has cwm recovery image not the original.
If u could point me to pure stock ROM moto g Indian Asian version first gen
Click to expand...
Click to collapse
Visit this thread for the guide and the files
help please
Sir I have the same problem I just wanted to ask u that how can I restore the stock recovery
Of moto g xt1033 I want to remove the custom recovery can anyone tell me that how can I do that I want to update my moto g xt1033 to android l
The only the that is preventing me doing that is the custom recovery so that's why I want to restore stock recovery in my moto g
Thank in advance
mukul panchal said:
Sir I have the same problem I just wanted to ask u that how can I restore the stock recovery
Of moto g xt1033 I want to remove the custom recovery can anyone tell me that how can I do that I want to update my moto g xt1033 to android l
The only the that is preventing me doing that is the custom recovery so that's why I want to restore stock recovery in my moto g
Thank in advance
Click to expand...
Click to collapse
Why dont people read? is it really that hard? look in the thread that I linked in the posts above.
AgentChaos said:
Why dont people read? is it really that hard? look in the thread that I linked in the posts above.
Click to expand...
Click to collapse
it worked thanks so much. that recovery image was the original one u provided. recovery image was not original before
thankkkkkk uuuu
Thnx sir really
But do I have to do all that if I have Asian 4.4.4 already and wanted to just flash original recovery because I have everything stock except recovery
Sry sir if I am asking anything wrong and this is the last question I have
mukul panchal said:
But do I have to do all that if I have Asian 4.4.4 already and wanted to just flash original recovery because I have everything stock except recovery
Sry sir if I am asking anything wrong and this is the last question I have
Click to expand...
Click to collapse
Get the recovery.img and run "fastboot flash recovery recovery.img" from bootloader mode.
Do it at your own risk^^^
everything worked perfectly
I flashed recovery as u advised me then did everything which was suggested in the original thread the only problem was recovery stock recovery is pretty tricky thing to open I had to press volume up for 9 sec for 10th sec the power button at the same time and it worked
Thnx everyone I really appreciate it
Moto G XT1034 4.4.4 to 5.0.2 update problem
I received Lollipop OTA notification for my XT1034 today (Retail Canada) and I downloaded and installed it but the phone got stuck at Motorola logo. I waited for about 45 mins on this screen but got desperate and turned it off (hard reset)
Tried to enter recovery and still it says Bootloader 41.13, tried to wipe cache partition and completed the process but after reboot it gets stuck at logo again, please help!
Hi all,
I am new to android and would be very grateful for anyones help, I attempted to upgrade my newly UK purchased moto G xt1032 4.4.4 Kitkat to Lollipop 5.02 by following the 'Analogindex.com' link (how-to-update-motorola-moto-g-1st-gen-xt1032-to-android-5-0-2-lollipop-cyanogenmod-12-konstakang-custom-rom-tutorial-_118532) which is at the bottom of my post. However things didn't go as planned.
I followed all of these steps perfectly until i got to step.10 .. then things went wrong.. when i selected "wipe cache partition" the phone rebooted to the lock screen, now i can't get the phone into recovery mode.. every time i select recovery option instead of getting the dead android (no command), the phone reboots to the bootloader lock screen. PLEASE HELP !!
I followed all the steps correctly.. the phone is rooted and flashed as instructed in description, using r2-motog-superboot and CWM Recovery. I still have the Supersu app showing and i have re-flashed CWM Recovery but still have the same issue. I am still on Kitkat 4.4.4. The 'wipe cache partition' also removed the Gapps and CM12 KonstaKANG files from the SD internal memory.
Any help will be much appreciated ...
I NEED HELP PLEASE!! THANKS
analogindex.com/howto/how-to-update-motorola-moto-g-1st-gen-xt1032-to-android-5-0-2-lollipop-cyanogenmod-12-konstakang-custom-rom-tutorial-_118532
I suggest downloading your phone's stock 4.4.4 ROM and use fastboot commands to manually flash each partition.
audit13 said:
I suggest downloading your phone's stock 4.4.4 ROM and use fastboot commands to manually flash each partition.
Click to expand...
Click to collapse
Thank you for the reply.. I will try and google how to do this, however if you have a link or more info on how to do this i will be grateful.
Thank you
Find the stock 4.4.4 firmware here: http://www.reddit.com/r/MotoG/comments/2p5t0n/moto_g_stock_firmwares/
http://forum.xda-developers.com/showthread.php?t=2542219
audit13 said:
Find the stock 4.4.4 firmware here: http://www.reddit.com/r/MotoG/comments/2p5t0n/moto_g_stock_firmwares/
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Many thanks.. I will update shortly if this has wirked
hi guys finally came the OTA update to my Moto G 2015. But when I download the update and then i try to install it the phone went into a boot loop when the system reboots to start this TWRP.
Any idea how to solve this problem?
The phone was rooted and unlocked bootloader
tks
__el___fran__ said:
hi guys finally came the OTA update to my Moto G 2015. But when I download the update and then i try to install it the phone went into a boot loop when the system reboots to start this TWRP.
Any idea how to solve this problem?
The phone was rooted and unlocked bootloader
tks
Click to expand...
Click to collapse
You have to unroot before you can apply the OTA.
Hi there,
I recommend that you follow these instructions.
Firstly , try flashing the recovery.img from the stock rom files. If that does not work , try re locking your boot loader.
As a last resort fully flash the correct stock rom to your device using fastboot. You can also use my Motorola Toolkit program to automate this process . If you look at the Moto g forums , scroll down on the general section , and look for Motorola toolkit. Download it and place the stock files in the directory as the toolkit . Then run toolkit.py and select flash stock . It should also be under Moto g 3 Tools and Utilities.
If you found this post helpful , please hit the thanks button . It really does mean alot to me !
Don't hesitate to ask for further information
therealduff1 said:
Hi there,
I recommend that you follow these instructions.
Firstly , try flashing the recovery.img from the stock rom files. If that does not work , try re locking your boot loader.
As a last resort fully flash the correct stock rom to your device using fastboot. You can also use my Motorola Toolkit program to automate this process . If you look at the Moto g forums , scroll down on the general section , and look for Motorola toolkit. Download it and place the stock files in the directory as the toolkit . Then run toolkit.py and select flash stock . It should also be under Moto g 3 Tools and Utilities.
If you found this post helpful , please hit the thanks button . It really does mean alot to me !
Don't hesitate to ask for further information
Click to expand...
Click to collapse
tks for the answer was very helpful, i solve de issue doing a wipe cache, no more bootloop but still no update.
I think I'll wait for official CM 13