Database Info

[rom][nandroid backup] 4.4.4 gpe using philz recovery

http://www.mediafire.com/download/4oh7s53da552hum/clockworkmod.7z
WARNING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
READ
I HAVE NOT TESTED THIS, READ THISSSSSSSSSSSSSSS
i don´t know if this can be useful for anybody? i am not really sure if someones needs this but well, there you go
THIS WILL NOT UNBRICK OR REVIVE YOUR BRICKED MOTO G
AFTER RESTORING IT WILL ASK FOR A PASSWORD OR KEY, THAT IS BECAUSE OF THE PARTITION MESS CREATED IN 444 AND 442 AND STOCK MOTO G VS TRUE MOTO G GPE
i am not responsible if it does not work for you, i could not test this, i am just uploading the files for a nandroid backup i did with philz 6.47.7 for a fresh format 4.4.4 GPE (converted from regular moto g)
THE REASON I DID THIS, WAS WITH THE HOPE OF USING IT ON MY OTHER BRICKED MOTO G AFTER A BAD OTA FLASH, OR MAYBE SOME DEV CAN USE THIS FOR CREATING SOMETHING
-----------------------------
this is a nandroid backup of a regular non gpe moto g xt1032 16gb global gsm, converted to 4.4.2 GPE, then updated via OTA to 4.4.4 with stock recovery
after OTA update everything was working perfect, then i installed philz recovery, wiped user data and cache, then i did make the nandroid backup using philz, compressed using 7zip and and uploaded the file
usage:
-decompress the file somewhere
-put the folder clockworkmod on the phone
-using a custom recovery you can restore but it will not work on bricked phones, i don´t know if it will work on working 4.4.4 phones
----------
i have another moto g bricked for an incorrect ota install, sadly i can´t use this since my partitions are messed up, and there is no way that i know to upload a folder via fastboot

After backup it asks for a password...

To use this; 'userdata' must be formatted to EXT4 - in other words, you need to have already have flashed the GPE fastboot firmware image including partition table. Otherwise you will get an encryption message (asks for password.) If the 4.4.4 GPE Kernel is needed, it's available here:
http://forum.xda-developers.com/showthread.php?t=2649763​

Thnks Dude ... usefull :good::good::good::good::good::good::good:

unable to to mount sdcard when using philz on fresh install of stock 4.4.2 plzzz help

lost101 said:
To use this; 'userdata' must be formatted to EXT4 - in other words, you need to have already have flashed the GPE fastboot firmware image including partition table. Otherwise you will get an encryption message. If the 4.4.4 GPE Kernel is needed, it's available here:
http://forum.xda-developers.com/showthread.php?t=2649763​
Click to expand...
Click to collapse
Thanks, i will try this.

If I'm on CrDroid
I want to convert my xt1033
To xt1032 (single sim)
Can I restore this ?
I don't have PC and I need to convert it don't have any option.
I am MSIM pure xt1033

psycho46 said:
After backup it asks for a password...
Click to expand...
Click to collapse
Same here..What password? Can not continue without password :crying:

nl2008 said:
Same here..What password? Can not continue without password :crying:
Click to expand...
Click to collapse
See post #3.

1.flash RETAIL-BR-DS_4.4.3_KXB21.14-L1.32_30_cid12_CFC_1FF.xml
2.reboot recovery install Blur_Version.210.12.32.falcon_umtsds.Brasil.en.BR-1
http://fs2.filegir.com/mohamad/RETAIL-BR-DS_4.4.3_KXB21.14-L1.32_30_cid12_CFC_1FF.xml.zip
http://fs2.filegir.com/mohamad/Blur_Version.210.12.32.falcon_umtsds.Brasil.en.BR.zip

sorry guys if it does not work
as i said i could not test this
my current moto g is bricked waiting for 444 images
and the moto g i used to create this nandroid backup was sold
i just uploaded the nandroid in case someone could use it for developing or something else, or help me un brick my phone

hi could you please share a nandroid backup of 4.4.4 us retail
I want to try it but I don't have a wifi connection and through my mobile internet I cannot ota because of my data limitations.
Please can anyone provide the full backup of 4.4.4 retail US Global GSM

Falcon G said:
hi could you please share a nandroid backup of 4.4.4 us retail
I want to try it but I don't have a wifi connection and through my mobile internet I cannot ota because of my data limitations.
Please can anyone provide the full backup of 4.4.4 retail US Global GSM
Click to expand...
Click to collapse
i believe there is no 444 for stock moto g non gpe
---------
bte i could unbrick my moto g using some guy method and german cwm backup, i tested my file from this post and yes it ask for a password, because partitions are a mess
stupid people who changed partitions in gpe and stock moto, really, who was the genius, let me congratulate that awesome person

hi guys
i made this post
http://forum.xda-developers.com/moto-g/help/believe-to-unbrick-moto-g-bricked-boot-t2809373
it is kinda the same, but it has the cwm in a zip

I got this restore by format /data directory to EXT4 via openrecover-twrp-2.7.7.1-xt1032 but NO network at all....Cant even recognised the simcard anymore..I've tried to flash stock modem from xt1032 still not working....Phone useless now without simcard....anyone got any solutions, pls share. My phone orig xt1033 convert to gpe xt1032 then ota 4.4.4 and soft brick when downgrade to gpe 4.2.2

soft brick,i think

HI
I tried to flash a no stock kernel and my moto g was in bootloop
then I tried to do all reset and in the TWRP I did a system reset
I tried to remedy ah i flashed a software stock with fastboot method following the guidance in the forum but the first steps give me the result of " failed"
after using the guide the motion g is still in bootloop
I do not know how to unlock it
Any advice?:crying::crying:

Valeri0 said:
HI
I tried to flash a no stock kernel and my moto g was in bootloop
then I tried to do all reset and in the TWRP I did a system reset
I tried to remedy ah i flashed a software stock with fastboot method following the guidance in the forum but the first steps give me the result of " failed"
after using the guide the motion g is still in bootloop
I do not know how to unlock it
Any advice?:crying::crying:
Click to expand...
Click to collapse
While posting such thing you should provide much more & clear information for the people who would like to help you
1 what is ur device (32,33,GPE)
2 what was the base ROM
3 what kernel you flashed
I assume you are on stock ROM and flashed aosp kernel
Just flash any stock based kernel... Like faux or Aero kernel(search in development sections) your phone should be up and running

Please only post development threads in the development section
Questions belong in the Q&A section
Thread moved

You need to flash the 4.4.4 O2 UK firmware image available here:
http://forum.xda-developers.com/showpost.php?p=54872143&postcount=362​
Alternatively flash the XT1032 Retail EU ROM available here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688​

-i have a moto g x1032 with gpe software
-the stock GPE
-I I tried to flesh the aereo kernel
I wanted to flash another stock kernel but the problem is that: on the memory of the moto g I have no other kernel and not being able to turn I can not put new kernel in the memory

Power on holding 'vol' down. You can flash the original GPe boot.img (kernel) via this fastboot screen:
mfastboot flash boot boot.img​
FYI, from your screenshot you are attempting to flash the O2 UK 4.4.2 firmware image.

in the guide on xda was written that I could fleshare another software and I chose one at random because i could not find the italian software...what can i do ?
I lost the phone forever or can i unlock it?

[Q&A] [ROM] 4.4.2 GPE, philz recovery, fixed logo, easy for noobs and no noobs

Q&A for [ROM] 4.4.2 GPE, philz recovery, fixed logo, easy for noobs and no noobs
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] 4.4.2 GPE, philz recovery, fixed logo, easy for noobs and no noobs. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

maurocds said:
http://youtu.be/faSg3puGssQ
download
http://www.mediafire.com/download/3..._recovery_6.13.19,_root,_drivers,_logo_fix.7z
basically this is a one click solution to flash a moto g into GPE, with a custom recovery, and boot logo fixed with every file included
hi, i just made this pack, in order to get an easy GPE rom with fixed logo and philz recovery with everything included for the flash ib 1 click, i just compiled some things so it can be easier for noobs and even no noobs to save time
the original idea came from this:
http://forum.xda-developers.com/showthread.php?t=2646404, but i wanted to add a custom recovery, logo fixed for unlocked devices, and have it all ready in a single package
features:
-4.4.2 rom GPE xt1032 stock
-adb files
-philz recovery falcon gpe philz_touch_6.13.9-falcon_gpe, you can replace the recovery for any other you want (using the same name for recovery) (i 100% recommend to use this included) warning read the last part of post
-supersu compatible with the philz recovery included for root (newer philz recovery does not work in gpe, also newer supersu cannot be flashed in the included recovery, you have to use this 2 versions included, trust me, later you still can update supersu)
-motorola drivers included, MotorolaDeviceManager_2.4.5
-logo fixed for unlocked devices (normal logo without the dumb unlocked blablabla info)
usage:
1)you need a moto g 1032xt with UNLOCKED BOOTLOADER, yes i mean you can use a stock moto g with motorola rom 4.4.2 or even a moto g GPE 4.4.2 if you want to restore the firmware as long as they are 1032xt, i don´t know about other models, my moto G are from amazon USA unlocked global gsm xt1032 16gb, if you are on 4.3 please update to oficial motorola rom 4.4.2, then you can use this
2)you need to install motorola drivers, included MotorolaDeviceManager_2.4.5, connect the phone on and let windows setup drivers, then off, then in bootloader in order to install drivers, if you don´t know what bootloader is, then please get out (ok noobs, bootloader is when the phone is off, press power + vol down for 3 secs and release, that is the bootloader)
3)after drivers, connect the phone in bootloader screen
4)execute in the PC GPE_XT1032_KOT49H.M004_CFC
5)wait............there are some purple lines of text like warnings, ignore them, don´t worry it is normal, wait until the end, unplug and press normal powerup or reboot the phone
6)phone should start into android welcome screen
optional (root)
7)in welcome screen or any other time, plug the phone and copy supersu into phone memory, power off the phone
8)boot into bootloader again, go to recovery, flash supersu (install zip, choose zip from sd card, select supersu.zip, yes install supersu.zip, wait some......................., press any key, reboot system now), restart, download supersu from playstore, done, you are root
WARNING about OTAs updates
no matter what firmware you use, if you have custom recovery, do not update the phone via OTA, i repeat DO NOT UPDATE
flash a stock recovery, then update via OTA, else the phone will be in a boot loop
thanks
dashiell.cano, for discovering that way of flash
Phil3759, for custom recovery
alonsoch, for moto g tool
Click to expand...
Click to collapse
can it be flashed on xt1033 running cm11?

being_sahil said:
can it be flashed on xt1033 running cm11?
Click to expand...
Click to collapse
i dont know
i have xt1032

[Q] Motorola Moto G XT1032 KitKat 4.4.4 upgrade to Lollipop 5.02

Hi all,
I am new to android and would be very grateful for anyones help, I attempted to upgrade my newly UK purchased moto G xt1032 4.4.4 Kitkat to Lollipop 5.02 by following the 'Analogindex.com' link (how-to-update-motorola-moto-g-1st-gen-xt1032-to-android-5-0-2-lollipop-cyanogenmod-12-konstakang-custom-rom-tutorial-_118532) which is at the bottom of my post. However things didn't go as planned.
I followed all of these steps perfectly until i got to step.10 .. then things went wrong.. when i selected "wipe cache partition" the phone rebooted to the lock screen, now i can't get the phone into recovery mode.. every time i select recovery option instead of getting the dead android (no command), the phone reboots to the bootloader lock screen. PLEASE HELP !!
I followed all the steps correctly.. the phone is rooted and flashed as instructed in description, using r2-motog-superboot and CWM Recovery. I still have the Supersu app showing and i have re-flashed CWM Recovery but still have the same issue. I am still on Kitkat 4.4.4. The 'wipe cache partition' also removed the Gapps and CM12 KonstaKANG files from the SD internal memory.
Any help will be much appreciated ...
I NEED HELP PLEASE!! THANKS
analogindex.com/howto/how-to-update-motorola-moto-g-1st-gen-xt1032-to-android-5-0-2-lollipop-cyanogenmod-12-konstakang-custom-rom-tutorial-_118532

I suggest downloading your phone's stock 4.4.4 ROM and use fastboot commands to manually flash each partition.

audit13 said:
I suggest downloading your phone's stock 4.4.4 ROM and use fastboot commands to manually flash each partition.
Click to expand...
Click to collapse
Thank you for the reply.. I will try and google how to do this, however if you have a link or more info on how to do this i will be grateful.
Thank you

Find the stock 4.4.4 firmware here: http://www.reddit.com/r/MotoG/comments/2p5t0n/moto_g_stock_firmwares/
http://forum.xda-developers.com/showthread.php?t=2542219

audit13 said:
Find the stock 4.4.4 firmware here: http://www.reddit.com/r/MotoG/comments/2p5t0n/moto_g_stock_firmwares/
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Many thanks.. I will update shortly if this has wirked

[Q] Bricked Moto G XT1033 with no OS and Don't know what to do

Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob

Hi,
Thanks for using XDA Assist Please Standby when we move your post here Moto G Help and Troubleshooting
Good Luck!

Did you try manually flashing each partition using fastboot commands?

answer
jacobjake said:
Guys , i am a newbie but i have a major problem.
i was in the process of rooting my moto g but wrongly erased my whole operating.
so i looked up a method to restore to stock [ was running 5.0.2 ] but after flashing recovery and boot image, i couldn't flash system.img and i also deleted a line from the xml following a RSD lite guide.
would you guys help me get the phone running .
i do have the lollipop update official zip .
and i can't even switch of my phone
jacob
Click to expand...
Click to collapse
go on youtube type in how to adb sideload a rom on moto g that video will fix your problem well it did for me GoodLuck

Is recovery installed? Are the Moto drivers installed on your pc?
I've been through something similar before and whenever I accidentally wipe the OS, I just connect then flash another rom usually starting from here http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and it will pop up under "my computer" where you can copy and try to flash your rom again. I assume it's the same with 5.0+ (I'm still on 4.4)
Which method did you use to flash lollipop?