Related
Yes, first of all i read all other Threads with the Words (Stuck and Google Logo) and i use Google. I spent yesterday about 5hours und could not fix the Problem.
So, i tried to install a ROM (CM9), i do that with the Guide from nexusshack..
I think somewhere between (Wipe System) i got the Problem. Now my Nexus S Stuck in the Boot - i made some Screenshots.
Maybe someone can help me?
same problem here any help?
Would be useful if you could point out your nexus S model...
Anyway, since you have access to bootloader, just flash cwm recovery with fastboot, go in recovery and wipe all, mount USB from inside recovery and transfer another rom for your model to the SD card. After that just flash the new rom and it should work.
nexus s 19020a
Yup....just flash custom recovery....then you can flash other rom..
Hey guys,
like mentioned in my thread before a week ( I will let it die ;-) ) I got the same problem with an I9023.
I flashed factory images including bootloader and radio,cwm-recovery via fastboot, every single action succeeded, but I still got stuck in this *%&/(()-Google-Screen. I cannot boot into recovery, only bootloader is working.
i have the same problem does any one have a suggestion !!
thanks in advance
Had the same issue about one month ago. It was when I installed CM9, there were missing drivers. Do not remember, which exactly.
What do you mean with 'drivers'?
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
chanduwatkar14344 said:
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Click to expand...
Click to collapse
u have this driver ?? http://pdanet.co/
do u got any solution for this...i too have same problem...
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
---------- Post added at 01:43 PM ---------- Previous post was at 01:37 PM ----------
yes i have...but,i don't know how to deal with that...so,plzz help me if u ca..would be helpful forme
---------- Post added at 01:51 PM ---------- Previous post was at 01:43 PM ----------
can u plzz give me the detail that how to that,would be helpful for me to do easily..plzzzz help
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Flash Stock Rom using ADB
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
thxlu said:
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
Click to expand...
Click to collapse
can' flash anything..it shows that i need to unlock the bootloader & the main problem im facing is can't unlock bootloader in fastboot mode withthe command "fastboot oem unlock"...
---------- Post added at 02:55 PM ---------- Previous post was at 02:27 PM ----------
trevdog said:
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
Click to expand...
Click to collapse
how to use odin to flash a stock rom..my nexus s bootloader is locked & can't able to get unlock in fastboot mode with the command "fastoot oem unlock"..plzzz help
I made a full wipe(with os too) with twrp on my p8max.
my device isn't recognized by my pc and by huawei hisuite.
To fix the problem i unistalled the twrp and tried to install the stock one with no results.
Now i am able to enter the fastboot mode and the huawei eRecovery (emui).
I downloaded the stock firmware for my device (UPDATA.APP) and used huawei update extractor. Suddenly i put the extracted files in my adb folder and tried to flash via fastboot after opening the command prompt as admin.
When i try to flash files ".img" i always get the error: "FAILED (remote : Command not allowed)"
P.s. My bootloader is unlocked and i checked that.
fastboot recognizes my device
HOW TO SOLVE THIS ERROR ? HOW TO FLASH MY FILES ?
whats the command you use to flash recovery?
fastboot flash recovery RECOVERY.img
same error..
PHONE unlocked
FRP Unlock
boot.img extracted from DAV-701LV100R001C199B005CUSTC199D002
but not accepting the command,
\P8_Max>fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (23388 KB)...
OKAY [ 0.773s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.778s
Drivers installed?
Hirs_E_Fruit said:
Drivers installed?
Click to expand...
Click to collapse
yes it is.. i think it is not about drivers.. because command is working but not accepting the part..
newest ADB and Fastboot files?
Hirs_E_Fruit said:
newest ADB and Fastboot files?
Click to expand...
Click to collapse
fastboot_adb(1.0.32)_071114_r21
i think it is new one.. maybe last one but it is new..
same problem here..
any one knew?
https://drive.google.com/open?id=0B7q0s3loYhP3YndkSjk3NUVJVzA
Same problem here. Reloaded drivers and no luck.
---------- Post added at 02:51 PM ---------- Previous post was at 02:47 PM ----------
lolcops92 said:
I made a full wipe(with os too) with twrp on my p8max.
my device isn't recognized by my pc and by huawei hisuite.
To fix the problem i unistalled the twrp and tried to install the stock one with no results.
Now i am able to enter the fastboot mode and the huawei eRecovery (emui).
I downloaded the stock firmware for my device (UPDATA.APP) and used huawei update extractor. Suddenly i put the extracted files in my adb folder and tried to flash via fastboot after opening the command prompt as admin.
When i try to flash files ".img" i always get the error: "FAILED (remote : Command not allowed)"
P.s. My bootloader is unlocked and i checked that.
fastboot recognizes my device
HOW TO SOLVE THIS ERROR ? HOW TO FLASH MY FILES ?
Click to expand...
Click to collapse
I tried Google and spent hours but no resolve. Please post if you get a fix..Thanks
vvette said:
Same problem here. Reloaded drivers and no luck.
---------- Post added at 02:51 PM ---------- Previous post was at 02:47 PM ----------
I tried Google and spent hours but no resolve. Please post if you get a fix..Thanks
Click to expand...
Click to collapse
Google USB Drivers installed, newest ADB/Fastboot Files, USB Debugging activated?
Hirs_E_Fruit said:
Google USB Drivers installed, newest ADB/Fastboot Files, USB Debugging activated?
Click to expand...
Click to collapse
Yes, yes and yes...Something is wrong. It appears this has happened to other types of phones too. I really want to root this thing!
vvette said:
Yes, yes and yes...Something is wrong. It appears this has happened to other types of phones too. I really want to root this thing!
Click to expand...
Click to collapse
Try it on a Linux Distribution like Ubuntu.
Otherwise i think you still have done something wrong or forget something...
Hirs_E_Fruit said:
Try it on a Linux Distribution like Ubuntu.
Otherwise i think you still have done something wrong or forget something...
Click to expand...
Click to collapse
Thanks, I have no clue on Linux... Seems like phone wont let it write to it. I can get info on ADB devices, Flash reboot no problem. BUT when trying to flash recovery or boot image it wont go. Tried 3 different computers/cables and no luck. Uggh !
vvette said:
Thanks, I have no clue on Linux... Seems like phone wont let it write to it. I can get info on ADB devices, Flash reboot no problem. BUT when trying to flash recovery or boot image it wont go. Tried 3 different computers/cables and no luck. Uggh !
Click to expand...
Click to collapse
Do you know how to do this on a mac? If so can you give a step by step? Its worth a shot. OR can anyone tell me how to use terminal on Mac and flash a recovery? Thanks!
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
But please confirm , was the update from b120 to b316 successfull?
Sent from my KIW-L22 using Tapatalk
gopinaidu77 said:
But please confirm , was the update from b120 to b316 successfull?
Click to expand...
Click to collapse
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
adriansticoid said:
I think it failed because the warning screen showed right?
Click to expand...
Click to collapse
Right that was what I am also thinking bro.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
adriansticoid said:
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
So it's a failure . which mean that it is a semi flashed update . which doesn't installed update.app .
Extract update.app from ota and put it in dload folder .later flash it manually using dload method .
He should follow this way to overcome those reboots
Sent from my KIW-L22 using Tapatalk
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
Consider reading my above post bro.
Sent from my KIW-L22 using Tapatalk
HONOR 8 Bricked
Hello ,
It happened on my FRD-L04, but I think is the same.
Bootloader is unlocked ?
1. Do you have all drivers installed ? OK
2.Do you have STOCK ROM ? OK. If not, use Huawei Firmare Finder to find suitable ROM. Be aware what you choose !!!
3. Unzipp (WinRar) the ROM.
4.Download and install Huawei Update Extractor. Run Huawei Update Extractor . Choose Update.app from the folder you unzipped the ROM.
5. Select cust.img , boot.img , recovery.img and system.img and extract them on a folder.
6.. Install MultiTool by Team (Multi Tool Team). The instalation will make a folder named UNBRICK.
7. Move the files extracted : cust.img , boot.img , recovery.img and system.img on the folder UNBRICK
8. Run MultiTool . Choose option 6 (unbrick) and after that choose option 2 ( if you already have files on folder UNBRICK)
9. Let the tool finish the job.
NOTE : You must have all drivers installed and the phone in FASTBOOT mode ( turn phone OFF - Press VOL- and insert USB cable simultaneously.)
Good luck !
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Was the bootloader unlocked ?
Do u have twrp installed ?
Sent from my KIW-L22 using Tapatalk
---------- Post added at 03:53 PM ---------- Previous post was at 03:53 PM ----------
Flo.B said:
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
Click to expand...
Click to collapse
If u have twrp I will make a flashable zip of stock ROM and cust
Sent from my KIW-L22 using Tapatalk
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Flo.B said:
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Click to expand...
Click to collapse
Can fastboot detect your phone?
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Flo.B said:
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Click to expand...
Click to collapse
From what you said, looks like it is reallt bricked. Service center is your friend.
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Try another ROM.
Flo.B said:
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Click to expand...
Click to collapse
Goodluck with it buddy.
technoguy09 said:
Try another ROM.
Click to expand...
Click to collapse
I try at least 3 ROM download on different website. I don't think that it can change anything.
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Flo.B said:
I try at least 3 ROM download on different website. I don't think that it can change anything.
Click to expand...
Click to collapse
Did you use Huawei Firmare Finder for your model ?
morpheus302 said:
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Click to expand...
Click to collapse
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
technoguy09 said:
Did you use Huawei Firmare Finder for your model ?
Click to expand...
Click to collapse
Yes, I Download 2 ROM on it but same problem on both.
Flo.B said:
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
Yes, I Download 2 ROM on it but same problem on both.
Click to expand...
Click to collapse
Leave it for service centre people .they will take care
Sent from my KIW-L22 using Tapatalk
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Talionator said:
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Click to expand...
Click to collapse
in CMD if you don't know you can use included Script
Alright, but where to find doggee bl7000 drivers I cant find them
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Its stuck on waiting for device
Means no Driver Installed on Your PC
mark332 said:
Means no Driver Installed on Your PC
Click to expand...
Click to collapse
phone got bootloop on orange state on logo
Mine got too
Talionator said:
phone got bootloop on orange state on logo
Click to expand...
Click to collapse
What i'm supposed to do ??? Mine got bootlooped too !
Bootloop
You must follow that instruction i got a bootloop after that i fixed it
community.doogee.cc/forum.php?mod=viewthread&tid=228&extra=page%3D1
and please use that firmware only for Dodgee BL7000
mega.nz/#!4W40QayS!8R7cJ6H0TwNPJpVQWpRWepGWI2Z0DiKC9A7GSHPlTz4
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Christian1968.Bolz said:
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Click to expand...
Click to collapse
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
mark332 said:
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Click to expand...
Click to collapse
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
steathnic666 said:
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
Click to expand...
Click to collapse
Not work
You can use Magisk for initial root
or wait while someone compile
After i followed the Instructions with the BL7000 unlock/root/ twrp tool , the bootloader was unlocked but the phone soft-bricked....Imei gone of course....back to stock rom....well...i tried to flash Twrp with flashtool, "size too big"
then tried to flash a smaller version of Twrp (13Mb ver. 3.2.1.0) that lead into total blackness....back to regular recovery...voila.....i dont wanna try the Tool again .....bootloader is still unlocked
i am giving up for now....
cheers...
Is there ANY working root method for the BL12000 (NOT pro) ? I've been looking for months now without success
hi my phone is stuck in a boot loop the doogee logo shows up after a couple of seconds screen turns off and doogee logo shows up again
i try to boot into recovery mode but nothing happens phone just turns on and bootloops i plug into my pc and get the usb connected sound then the usb disconnected sound then phone just bootloops can you help
Hello guys i have Nokia 3 and i want to root it can i root it without any problems and after root can I recieve updates and am able to install it successfully?
I need help
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
xdrucsix said:
I unlocked the bootloader, Thanks to the_laser, but... I can´t install any recovery, I´ve looking many options, and I can´t
Can yo help me, giving me the link here or by private message.
I need to root my nokia 3 ta-1028 please.
Thanks a lot
Click to expand...
Click to collapse
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
Oh, Ok I can see, I have to wait :/
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - "fastboot boot <recovery.img>"
the_laser said:
is there any difference between ta-1028 and ta-1032 in TWRP view ?
it is easy to try just boot into recovery - fastboot boot recovery <recovery.img>
Click to expand...
Click to collapse
i know that ta-1032 is for EU dual sim, ta-1028 is american single sim version but i think that there is no difference in hardware. he can try that command to see is that recovery works @xdrucsix
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
then you will see does it boot or not. twrp will disappear completely after you exit twrp.
I did every step that you say, nothing happened :/
something should definitely happen
at least show all fastboot.exe output during your tries
SkaboXD said:
twrp is available only for ta-1032, sorry about that, you need to wait for someone to port it.
Click to expand...
Click to collapse
The twrp dint even work for 1032..
Mithra siva said:
The twrp dint even work for 1032..
Click to expand...
Click to collapse
it worked for me and others, which method you tried?
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only.. it was showing writing ..'recovery' failed..
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
The method you have mentioned only..
It was showing ." Writing 'recovery'...failed (remote size too large)... Please help
SkaboXD said:
it worked for me and others, which method you tried?
Click to expand...
Click to collapse
Bro say something
Mithra siva said:
Bro say something
Click to expand...
Click to collapse
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
SkaboXD said:
try this
Steps:
first download twrp if you didn't
rename recovery to recovery.img and move it to platform-tools
open cmd as administrator
type location of platform-tools
boot to fastboot
type command
fastboot boot recovery.img
Click to expand...
Click to collapse
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Mithra siva said:
How to type location..I have kept it in root folder of (E)
---------- Post added at 05:16 AM ---------- Previous post was at 05:00 AM ----------
Can you please send again...how to install twrp..with twrp link indetail.. I go for a last try..
Click to expand...
Click to collapse
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
SkaboXD said:
link for twrp
https://1drv.ms/u/s!AsmTb5aqoY12mDZqDZbPOp47QVMV
when downloaded, copy twrp to folder platform-tools and rename it to recovery.img
to type platform-tools location, type this:
chdir C:/Users/John/Desktop/platform-tools (this is just a example, you need to type your own location of platform-tools)
reboot to recovery
adb reboot recovery
then reboot to bootloader (fastboot) by pressing volume keys.
to flash recovery type this command:
fastboot flash recovery recovery.img
then reboot, fastboot reboot
if it didn't worked, use this command just to boot to twrp (you need to do this everytime when you are connected to PC)
fastboot boot recovery.img
To install root, first disable system modification on twrp then flash this zip for root.
This is not the latest version of SuperSU, but newest releases have some problems and crashes. (at least for me). This is last version that works for me.
That is it.
Click to expand...
Click to collapse
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Mithra siva said:
Thanks man it's done..
Click to expand...
Click to collapse
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Mithra siva said:
Thanks man it's done..
---------- Post added at 03:35 PM ---------- Previous post was at 03:33 PM ----------
Now can I relock my Bootloader with root..if i can please instruct me
And again thanks a lot
Click to expand...
Click to collapse
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
SkaboXD said:
no, you can't have locked bootloader and root, after locking bootloader you need to reflash .nb0 file with OST because locking bootloader don't just remove data, it removes whole ROM.
Click to expand...
Click to collapse
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Mithra siva said:
I can't able to remove the system apps even after root..I used system app remover (root) ..
Help
Click to expand...
Click to collapse
did you rebooted after uninstalling system apps?
SkaboXD said:
did you rebooted after uninstalling system apps?
Click to expand...
Click to collapse
It was showing uninstalling failed