Yes, first of all i read all other Threads with the Words (Stuck and Google Logo) and i use Google. I spent yesterday about 5hours und could not fix the Problem.
So, i tried to install a ROM (CM9), i do that with the Guide from nexusshack..
I think somewhere between (Wipe System) i got the Problem. Now my Nexus S Stuck in the Boot - i made some Screenshots.
Maybe someone can help me?
same problem here any help?
Would be useful if you could point out your nexus S model...
Anyway, since you have access to bootloader, just flash cwm recovery with fastboot, go in recovery and wipe all, mount USB from inside recovery and transfer another rom for your model to the SD card. After that just flash the new rom and it should work.
nexus s 19020a
Yup....just flash custom recovery....then you can flash other rom..
Hey guys,
like mentioned in my thread before a week ( I will let it die ;-) ) I got the same problem with an I9023.
I flashed factory images including bootloader and radio,cwm-recovery via fastboot, every single action succeeded, but I still got stuck in this *%&/(()-Google-Screen. I cannot boot into recovery, only bootloader is working.
i have the same problem does any one have a suggestion !!
thanks in advance
Had the same issue about one month ago. It was when I installed CM9, there were missing drivers. Do not remember, which exactly.
What do you mean with 'drivers'?
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
chanduwatkar14344 said:
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Click to expand...
Click to collapse
u have this driver ?? http://pdanet.co/
do u got any solution for this...i too have same problem...
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
---------- Post added at 01:43 PM ---------- Previous post was at 01:37 PM ----------
yes i have...but,i don't know how to deal with that...so,plzz help me if u ca..would be helpful forme
---------- Post added at 01:51 PM ---------- Previous post was at 01:43 PM ----------
can u plzz give me the detail that how to that,would be helpful for me to do easily..plzzzz help
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Flash Stock Rom using ADB
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
thxlu said:
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
Click to expand...
Click to collapse
can' flash anything..it shows that i need to unlock the bootloader & the main problem im facing is can't unlock bootloader in fastboot mode withthe command "fastboot oem unlock"...
---------- Post added at 02:55 PM ---------- Previous post was at 02:27 PM ----------
trevdog said:
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
Click to expand...
Click to collapse
how to use odin to flash a stock rom..my nexus s bootloader is locked & can't able to get unlock in fastboot mode with the command "fastoot oem unlock"..plzzz help
Related
i attempted to put the clockwork mod reovery and the matrix ROM on my nexus and now my phone will turn on show the google name and the root lock for 1/2 sec then go to my boot loader and at the top it says "NO BOOT OR RECOVERY IMG" PLEASE HELP!
You need to flash a rom. Once you root your phone you have to have a image to boot into.
http://www.youtube.com/watch?v=GSD92Qjt5Og&feature=youtube_gdata_player
†††
........................................
my nexus is already rooted but on startup it says NO BOOT OR RECOVERY IMG.
Try flashing the recovery image again via adb. Watch that video it will show you how to do that. If you are rooted and you are not able to boot into recovery the image didn't take, was installed incorrectly, or maybe is the wrong or a bad dl. If all else fails start from scratch., step by step.
†††
kcook2369 said:
my nexus is already rooted but on startup it says NO BOOT OR RECOVERY IMG.
Click to expand...
Click to collapse
I hope this helps http://dodgerturf.com/forum/showthread.php?tid=2830&pid=5556#pid5556
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
also try flashing your custom recovery once again using the adb command "fastboot flash recovery FILE PATH" without quotes.
Hi Everyone!
I have a problem that i hope somebody can solve! Lots of similar problems but not quite the same....So here it goes. I flashed a rom and now it is stuck at the Google logo upon boot. I would normally just go into recovery and flash my backup.....but the power button doesn't work. So I can't boot into recovery....it's just stuck. Help Plz!!!! CWM is installed.
not sure if this would work here (worked on my old phone). See if you have adb access during boot. If yes, then you can use the command "adb reboot recovery". Hope you're lucky and have adb in that stage..
plzzzzz help if u can...
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
---------- Post added at 01:18 AM ---------- Previous post was at 01:05 AM ----------
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
andrei1015 said:
not sure if this would work here (worked on my old phone). See if you have adb access during boot. If yes, then you can use the command "adb reboot recovery". Hope you're lucky and have adb in that stage..
Click to expand...
Click to collapse
I paid a cell repair shop $40 to fix the button. I booted into recovery before i left the store! Back on Cyanogenmod 10. Works great! Should've just got the button fixed months ago to avoid this!
Hi there!
I just had a go at flashing my new HTC One M8, and I'm stuck in recovery mode.
I followed these instructions:
androidcentral.us/2014/04/root-att-htc-one-m8/
But got the TWRP file from here because the original link was overloaded:
androidfiles.org/?developer=M8&folder=Recoveries
I essentially just ran:
Code:
fastboot-mac erase
cachefastboot-mac
flash boot recovery.img
fastboot-mac reboot
Then installed the SuperSU update zip. Now every time I try reboot into the Android system, it boots into recovery mode. If I boot into the bootloader, I get the option to boot using fastboot but that appears to fail (it returns me to the bootloader after a second). If I select hboot, it says "No image or wrong image!" after trying to load a .nbh file.
Any ideas?
BTW, I got the unlocked version from Amazon: amazon.com/HTC-One-M8-Unlocked-Warranty/dp/B00J3554KE/
marcog123 said:
hi there!
I just had a go at flashing my new htc one m8, and i'm stuck in recovery mode.
I followed these instructions:
Androidcentral.us/2014/04/root-att-htc-one-m8/
but got the twrp file from here because the original link was overloaded:
Androidfiles.org/?developer=m8&folder=recoveries
i essentially just ran:
Code:
fastboot-mac erase
cachefastboot-mac
flash boot recovery.img
fastboot-mac reboot
then installed the supersu update zip. Now every time i try reboot into the android system, it boots into recovery mode. If i boot into the bootloader, i get the option to boot using fastboot but that appears to fail (it returns me to the bootloader after a second). If i select hboot, it says "no image or wrong image!" after trying to load a .nbh file.
Any ideas?
Btw, i got the unlocked version from amazon: Amazon.com/htc-one-m8-unlocked-warranty/dp/b00j3554ke/
Click to expand...
Click to collapse
you flashed recovery to kernel partition! The guide is wrong as i read.
To flash recovery:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
BUT you will also need to flash the kernel again as you just messed it up!
Ouch! Ok, that sucks that steps I was following were wrong. :/ But at least I feel less like an idiot.
So I found a boot.img from here: http://forum.xda-developers.com/showthread.php?p=51580259 and flashed that. Now I'm not returning to the recovery screen, but to the bootloader always and it gives the same message about wrong image.
Here are the commands I ran:
Code:
./fastboot-mac erase cache
./fastboot-mac flash boot boot.img
./fastboot-mac flash recovery Recovery.img
./fastboot-mac reboot
marcog123 said:
Ouch! Ok, that sucks that steps I was following were wrong. :/ But at least I feel less like an idiot.
So I found a boot.img from here: http://forum.xda-developers.com/showthread.php?p=51580259 and flashed that. Now I'm not returning to the recovery screen, but to the bootloader always and it gives the same message about wrong image.
Here are the commands I ran:
Code:
./fastboot-mac erase cache
./fastboot-mac flash boot boot.img
./fastboot-mac flash recovery Recovery.img
./fastboot-mac reboot
Click to expand...
Click to collapse
can you stil enter fastboot mode?
Is fastboot mode the one where you see "FASTBOOT USB" in red on top? Cause I can get into that and connect to my phone from my laptop.
marcog123 said:
Is fastboot mode the one where you see "FASTBOOT USB" in red on top? Cause I can get into that and connect to my phone from my laptop.
Click to expand...
Click to collapse
Thats good. I'll help you get back working phone.
BUT i need some info:
Please tell me what bootloader is about:
HBoot and so on. Also i need to know if its an "UNLOCKED" phone sold by a carrier. Or a carrier free phone. Because you will need fittig software for each model.
The info on top of the bootloader screen?
Code:
M8_UL_CA PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA03_2G
OpenDSP-v26.2.2-00538-M8974.0106
OS-1.12.1540.17
eMMC-boot 2048MB
Mar 3 2014,20:18:02.0
It's an unlocked (carrier free) phone sold by Amazon: amazon.com/HTC-One-M8-Unlocked-Warranty/dp/B00J3554KE/
Okay. Will get the right files.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
The kernel you flashed is for "SPRINT" m8 and NOT COMPATIBLE to your device. Just don't flash any files as long as you don't know if theyre matching your phone please.
Did you flash the TWRP 2703 version?
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
marcog123 said:
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
Click to expand...
Click to collapse
can you enter TWRP?
by select "recovery" in bootloader
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
marcog123 said:
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
Click to expand...
Click to collapse
can you enter TWRP?
by select "recovery" in bootloader
This kernel may work: http://androidfil.es/1mSt Don't flash it yet.
Yes, that gets me into TWRP!
marcog123 said:
Yes, that gets me into TWRP!
Click to expand...
Click to collapse
Just that you know, that is YOUR phone:
x.xx.1540.x - HTC One U.S. Developer Edition
I'm looking for a stock rom, if that is not possible you will have to use a custom rom
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
marcog123 said:
Yes, that gets me into TWRP!
Click to expand...
Click to collapse
Have you installed adb on your laptop? BTW are you using a apple mac?
Download this rom please --> LINK
The rom includes stock kerne. Just download it and we'll try to flash just the included kernel file as it should get your device back working.
Otherwise you'll have to flash full rom via twrp.
Please tell me when your download is ready. And this time do yourself a favor and DON'T act on your own as long as you don't know what you're doing...
Oh my, thanks so much that worked!! You're awesome! I honestly had a feeling I'd lost my phone.
Glad you got it back alive
Sent from my beloved HTC One S using (most time buggy) Tapatalk
LS.xD said:
Glad you got it back alive
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
tnx brother i also make same mistek i flash recover in kernel and now only in recover same information as i see above but in device its not show os...version......i try to download your file but its link expire......please help me.
my htc one is stuck in recovery mode
i have a htc one from verizon ( unlocked) it was upgrading but was taking too long so i disconnect the phone ( big mistake i know) since that i turn on my phone and i got this :
ANDROID SYSTEM RECOVERY <3e>
at botton shows the following:
E:missing bitmap oem_unlock_bg
(code-1)
write host mode success
handle _cota_install: No CW files. Skip cw installation
hope you can help me
wachoforeal said:
i have a htc one from verizon ( unlocked) it was upgrading but was taking too long so i disconnect the phone ( big mistake i know) since that i turn on my phone and i got this :
ANDROID SYSTEM RECOVERY <3e>
at botton shows the following:
E:missing bitmap oem_unlock_bg
(code-1)
write host mode success
handle _cota_install: No CW files. Skip cw installation
hope you can help me
Click to expand...
Click to collapse
HTC One M7 or M8 ?
ls.xd said:
htc one m7 or m8 ?
Click to expand...
Click to collapse
htc one m8
wachoforeal said:
htc one m8
Click to expand...
Click to collapse
Flash TWRP in fastboot mode.
Install STOCK ROM in TWRP.
Phone will be fine again
i am downloading the software but how do i install?
---------- Post added at 05:55 PM ---------- Previous post was at 05:36 PM ----------
wachoforeal said:
i am downloading the software but how do i install?
Click to expand...
Click to collapse
i have a problem , i have just downloaded the twrp , but whenever i try to open, its a disc image , that is correct?
---------- Post added at 06:10 PM ---------- Previous post was at 05:55 PM ----------
Phone will be fine again
i have a problem , i have just downloaded the twrp , but whenever i try to open, its a disc image , is that correct?
---------- Post added at 06:40 PM ---------- Previous post was at 06:10 PM ----------
fella something is wrong , the twrp is a image file its not a program .
Phone will be fine again
Today I tried to flash a new ROM and basically bricked my Z3. However, I was able to install a stock firmware and got the phone working perfectly again. Problem is, I want to install a new ROM (elsewhere in the forum) but I have lost my recovery mode and fastboot mode. Can anyone explain how I can get them back or install a new one? I tried flashing the TWRP recovery onto the phone but it keeps coming back with an error. My phone is not bootlocked and is rooted. I just want some kind of recovery options. Please help.
Thanks in advance :good:
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
darkdevu said:
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
Click to expand...
Click to collapse
My bootloader IS unlocked but still can't flash it. Fastboot not working either.
1974darrenh said:
My bootloader IS unlocked but still can't flash it. Fastboot not working either.
Click to expand...
Click to collapse
Try another PC or laptop to flash.
darkdevu said:
Try another PC or laptop to flash.
Click to expand...
Click to collapse
Is it possible to flash a new ROM without a working recovery? Any apps I can use?
I also downloaded TWRP manager and tried to install it but it comes back with an error.
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Talionator said:
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Click to expand...
Click to collapse
in CMD if you don't know you can use included Script
Alright, but where to find doggee bl7000 drivers I cant find them
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Its stuck on waiting for device
Means no Driver Installed on Your PC
mark332 said:
Means no Driver Installed on Your PC
Click to expand...
Click to collapse
phone got bootloop on orange state on logo
Mine got too
Talionator said:
phone got bootloop on orange state on logo
Click to expand...
Click to collapse
What i'm supposed to do ??? Mine got bootlooped too !
Bootloop
You must follow that instruction i got a bootloop after that i fixed it
community.doogee.cc/forum.php?mod=viewthread&tid=228&extra=page%3D1
and please use that firmware only for Dodgee BL7000
mega.nz/#!4W40QayS!8R7cJ6H0TwNPJpVQWpRWepGWI2Z0DiKC9A7GSHPlTz4
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Christian1968.Bolz said:
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Click to expand...
Click to collapse
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
mark332 said:
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Click to expand...
Click to collapse
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
steathnic666 said:
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
Click to expand...
Click to collapse
Not work
You can use Magisk for initial root
or wait while someone compile
After i followed the Instructions with the BL7000 unlock/root/ twrp tool , the bootloader was unlocked but the phone soft-bricked....Imei gone of course....back to stock rom....well...i tried to flash Twrp with flashtool, "size too big"
then tried to flash a smaller version of Twrp (13Mb ver. 3.2.1.0) that lead into total blackness....back to regular recovery...voila.....i dont wanna try the Tool again .....bootloader is still unlocked
i am giving up for now....
cheers...
Is there ANY working root method for the BL12000 (NOT pro) ? I've been looking for months now without success
hi my phone is stuck in a boot loop the doogee logo shows up after a couple of seconds screen turns off and doogee logo shows up again
i try to boot into recovery mode but nothing happens phone just turns on and bootloops i plug into my pc and get the usb connected sound then the usb disconnected sound then phone just bootloops can you help