Related
Yes, first of all i read all other Threads with the Words (Stuck and Google Logo) and i use Google. I spent yesterday about 5hours und could not fix the Problem.
So, i tried to install a ROM (CM9), i do that with the Guide from nexusshack..
I think somewhere between (Wipe System) i got the Problem. Now my Nexus S Stuck in the Boot - i made some Screenshots.
Maybe someone can help me?
same problem here any help?
Would be useful if you could point out your nexus S model...
Anyway, since you have access to bootloader, just flash cwm recovery with fastboot, go in recovery and wipe all, mount USB from inside recovery and transfer another rom for your model to the SD card. After that just flash the new rom and it should work.
nexus s 19020a
Yup....just flash custom recovery....then you can flash other rom..
Hey guys,
like mentioned in my thread before a week ( I will let it die ;-) ) I got the same problem with an I9023.
I flashed factory images including bootloader and radio,cwm-recovery via fastboot, every single action succeeded, but I still got stuck in this *%&/(()-Google-Screen. I cannot boot into recovery, only bootloader is working.
i have the same problem does any one have a suggestion !!
thanks in advance
Had the same issue about one month ago. It was when I installed CM9, there were missing drivers. Do not remember, which exactly.
What do you mean with 'drivers'?
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
chanduwatkar14344 said:
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Click to expand...
Click to collapse
u have this driver ?? http://pdanet.co/
do u got any solution for this...i too have same problem...
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
---------- Post added at 01:43 PM ---------- Previous post was at 01:37 PM ----------
yes i have...but,i don't know how to deal with that...so,plzz help me if u ca..would be helpful forme
---------- Post added at 01:51 PM ---------- Previous post was at 01:43 PM ----------
can u plzz give me the detail that how to that,would be helpful for me to do easily..plzzzz help
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Flash Stock Rom using ADB
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
thxlu said:
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
Click to expand...
Click to collapse
can' flash anything..it shows that i need to unlock the bootloader & the main problem im facing is can't unlock bootloader in fastboot mode withthe command "fastboot oem unlock"...
---------- Post added at 02:55 PM ---------- Previous post was at 02:27 PM ----------
trevdog said:
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
Click to expand...
Click to collapse
how to use odin to flash a stock rom..my nexus s bootloader is locked & can't able to get unlock in fastboot mode with the command "fastoot oem unlock"..plzzz help
My Nexus s i9020T is stuck on the google screen. I was trying to root it and when it was done my phone rebooted and it got stuck on the google screen. My bootloader is unlocked and i was running on gingerbread 2.3.6 can somebody tell me how to resolve this issue using a mac
How long did you waited? Sometimes that Google logo could tale a long time. Try going through the root process again
Sent from my Nexus S using Tapatalk 2
Same problem
I got the same problem. i can access recovery mode but my phone is not getting detected in PC. just hangs on Google logo (white) :crying:
bootloader os locked also.
My Model is GT-I9020T.
please help.
thanks in advance.
You should try the usb jig sold on ebay for the Nexus S.. It will bring the phone to download mode so you can flash your firmware with odin.. To use odin on your mac you need to have Windows installed with a virtual machine or virtualbox..
---------- Post added at 03:40 AM ---------- Previous post was at 03:35 AM ----------
Kumar Anil said:
I got the same problem. i can access recovery mode but my phone is not getting detected in PC. just hangs on Google logo (white) :crying:
bootloader os locked also.
My Model is GT-I9020T.
please help.
thanks in advance.
Click to expand...
Click to collapse
Bad luck for you.. Since your bootloader is locked and you can't unlock it you can't do anything.. Also you are talking about stock Android recovery right..? No TWRP or CWM..?
same problem
thanks for replying.
actually
I have google nexus GT-I9020t. it hangs on google logo (white). fastboot oem unlock is not working. lock state : locked.
when i go into recovery mode and try to wipe data/factory reset, it says:
e:format_volume: make_extf4fs failed on /dev/block/platform/s3c-sdhc1.0/byname/userdata
if i try to flash using fastboot, it says run fastboot oem unlock command.
it is not detecting in odin also. i have installed the drivers though.
else it is going to recovery mode, showing the lock status and i can also go futher in format, data wipe menu.
anything i can purchase will help or not, i dont know.
please help.
Kumar Anil said:
thanks for replying.
actually
I have google nexus GT-I9020t. it hangs on google logo (white). fastboot oem unlock is not working. lock state : locked.
when i go into recovery mode and try to wipe data/factory reset, it says:
e:format_volume: make_extf4fs failed on /dev/block/platform/s3c-sdhc1.0/byname/userdata
if i try to flash using fastboot, it says run fastboot oem unlock command.
it is not detecting in odin also. i have installed the drivers though.
else it is going to recovery mode, showing the lock status and i can also go futher in format, data wipe menu.
anything i can purchase will help or not, i dont know.
please help.
Click to expand...
Click to collapse
I made a USB JIG And its showing me some screen. please Check and update.
Kumar Anil said:
I made a USB JIG And its showing me some screen. please Check and update.
Click to expand...
Click to collapse
I remember this screen when I first rooted my Nexus S GTi9023. About the Google logo keep showing, phone probably not finding correct bootloader. I have this issue when I tried jellyBam rom. Fortunalty I had the nandroid back up of other roms that I have tried and I pick up then CM 10.1.2 and choose its backup file for restoring bootloader. Here you me also flash bootloader from PC as well as.
vikaskanani said:
I remember this screen when I first rooted my Nexus S GTi9023. About the Google logo keep showing, phone probably not finding correct bootloader. I have this issue when I tried jellyBam rom. Fortunalty I had the nandroid back up of other roms that I have tried and I pick up then CM 10.1.2 and choose its backup file for restoring bootloader. Here you me also flash bootloader from PC as well as.
Click to expand...
Click to collapse
But how to flash a bootloader? when i try "fastboot oem unlock" it fails. and when it is locked i cant flash a bootloader. any suggestions?
Kumar Anil said:
But how to flash a bootloader? when i try "fastboot oem unlock" it fails. and when it is locked i cant flash a bootloader. any suggestions?
Click to expand...
Click to collapse
You need to accept the warning message, the screen you attached.
Have a look at redmondpie.com/unlock-nexus-s-bootloader-how-to-guide/ (sorry cant post link as i am new user)
As I said, its been a long time, since I rooted, so I guess, you need to use power key or volume key for any action.
fastboot oem unlock not working
vikaskanani said:
You need to accept the warning message, the screen you attached.
Have a look at redmondpie.com/unlock-nexus-s-bootloader-how-to-guide/ (sorry cant post link as i am new user)
As I said, its been a long time, since I rooted, so I guess, you need to use power key or volume key for any action.
Click to expand...
Click to collapse
I guess, USB debugging mode was not checked at the time of the crash. It is detecting in the fastboot devices command but not in ADB devices.
i did everything in the link, you provided me.
and any other way to force partion of somthing. Any Other Option.
FATSBOOT OEM COMMAND:
http://s10.postimg.org/r0rjcrxe1/fastboot_oem_failed.jpg
thanks in advance
Can you boot in jelly bean?? Strange issue!
Sent from my Nexus 7 using xda app-developers app
So, i've followed the instructions from the guide as best as I could. And my phone is definitely unlocked.
I have ADB and Fastboot installed, and when I use the command "fastboot flash recovery twrp.img" it says what it's supposed to in the cmd prompt.
however one of 2 things happens when I try to reboot after that. It either boots into Huawei recovery with the EMUI 5.0 logo.
or it gets stuck on a boot loading screen that says "your device is now booting..." but never progresses past there.
i've been working and searching for about 4 hours now on how to fix it and it's driving me crazy haha. I just want to install a stock android instead of EMUI.
Any help would be GREATLY appreciated.
gfreak said:
So, i've followed the instructions from the guide as best as I could. And my phone is definitely unlocked.
I have ADB and Fastboot installed, and when I use the command "fastboot flash recovery twrp.img" it says what it's supposed to in the cmd prompt.
however one of 2 things happens when I try to reboot after that. It either boots into Huawei recovery with the EMUI 5.0 logo.
or it gets stuck on a boot loading screen that says "your device is now booting..." but never progresses past there.
i've been working and searching for about 4 hours now on how to fix it and it's driving me crazy haha. I just want to install a stock android instead of EMUI.
Any help would be GREATLY appreciated.
Click to expand...
Click to collapse
I have the same issue I flashed TWRP 3.1.1-1 from the OpenKirin team and I cannot get into TWRP recovery, I can only get into eRecovery. However I am not stuck on the "your device is now booting..." screen. It actually boots into the system os. Does anyone know how to get into TWRP, is anyone else having this issue?
---------- Post added at 08:42 PM ---------- Previous post was at 08:29 PM ----------
gfreak said:
So, i've followed the instructions from the guide as best as I could. And my phone is definitely unlocked.
I have ADB and Fastboot installed, and when I use the command "fastboot flash recovery twrp.img" it says what it's supposed to in the cmd prompt.
however one of 2 things happens when I try to reboot after that. It either boots into Huawei recovery with the EMUI 5.0 logo.
or it gets stuck on a boot loading screen that says "your device is now booting..." but never progresses past there.
i've been working and searching for about 4 hours now on how to fix it and it's driving me crazy haha. I just want to install a stock android instead of EMUI.
Any help would be GREATLY appreciated.
Click to expand...
Click to collapse
Ok so I actually found a solution. I have been searching for hours (up until my last post). First download Huawei Multi tool https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923 . Once the tool is up and running press 3 and then enter to read the list of recovery options. At this point in time make sure you have usb debugging on. You can do this by going into about phone and tapping on build version until it says "you are now a developer", then go into developer options and enable usb debugging. When your phone asks to trust the computer tap on yes. Now go back to the Multi Tool and press 3 again followed by the enter key. It should boot into TWRP. The next step is a nandroid backup ( I have learned the hard way many times before). Last step is to thank multi team for making this so easy
First read full steps iam not pro developer just share my experience(if step or missed just say)
Step 1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb install.zip and extract From above adb and Fastboot driver Installer
Step 3. Now Install adb and fastboot Driver on Your pc, path(C:\Program Files\Minimal ADB and Fastboot or C:\Program Files (x86)\Minimal ADB and Fastboot)
Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock
Step 5.Open the command on your PC. To open a command window in the current directory in Windows, press shift + Right Click anywhere on Windows explorer connect device into pc open CMD Here and type command :good:
Then follow Bellow Instructions be Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 6. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot oem unlock-go
or
fastboot flashing unlock
And one think unlock bootloader if loss data and stoarge:silly:
Step7. Rename twrp into recovery.img and put in adb Folder
Step8.(cmd) fastboot boot recovery recovery.img (dont flash just boot)
Step9. Recovery is Now boot and copy magisk on stoarge
Download Magisk latest yours choice(but i prefer magisk 15.1). copy to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF in case any porblem or bootloop
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot (if new member search how to recovery boot on android search youtube )
first boot may time pls just wait if sucess press thanks button
Error cannot load recovery.img
Plzzzz help
Hem97 said:
Error cannot load recovery.img
Plzzzz help
Click to expand...
Click to collapse
Screen shot
Hem97 said:
Error cannot load recovery.img
Plzzzz help
Click to expand...
Click to collapse
Unlock bootloder and say wat error
george.simbu said:
Unlock bootloder and say wat error
Click to expand...
Click to collapse
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Hem97 said:
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Click to expand...
Click to collapse
Usb debugging check and start
Hem97 said:
Yes i unlock bootloader...using cmd..
All okay but when i try 'fastboot boot recovery twrp.img'
Then 'permisen denied' shows
I am using xda app ..i dont know why says bad network cant upload screenshots
Click to expand...
Click to collapse
U have dnt unlock bootloder pls check that cmd using at post 2nd cmd
george.simbu said:
U have dnt unlock bootloder pls check that cmd using at post 2nd cmd
Click to expand...
Click to collapse
Bootloder issue
Yes i got it.....?
Factory data reset and then i do this tutorial....and i successfully flashed twrp
---------- Post added at 08:16 PM ---------- Previous post was at 08:11 PM ----------
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Make time buddy my previous mobile hs2 but iam use still now mi a1 lets wait
george.simbu said:
Step1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb folder From above and Fastboot driver Installer From above
Step 3. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .
tep7. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot flashing unlock
or
fastboot oem unlock-go
Step8. Rename twrp into recovery.img and put in adb Folder, To flash twrp Type-
fastboot boot recovery recovery.img(dont flash just boot)
Step9. Recovery is Now boot
Root Micromax Canvas Infinity-
Download Magisk latest(but i prefer magisk 15.1). Save it to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot
first boot may time pls just wait if sucess press thanks button
thanks you xda
Click to expand...
Click to collapse
Are you sure this is the right recovery for micromax hs2, cuz i flashed this on my device and now its on bootloop, please don't put misleading stuff on xda. And moderators i request please dont allow people to fool others by promoting misleading tech stuff
Sudhangshu said:
Are you sure this is the right recovery for micromax hs2, cuz i flashed this on my device and now its on bootloop, please don't put misleading stuff on xda. And moderators i request please dont allow people to fool others by promoting misleading tech stuff
Click to expand...
Click to collapse
This right recovery and one member also sucess I am not fool mind you words
george.simbu said:
This right recovery and one member also sucess I am not fool mind you words
Click to expand...
Click to collapse
IAM just boot on recovery don't falshed
george.simbu said:
Step1. Download twrp Recovery for Your Device (HS2)From
Step 2. Download adb folder From above and Fastboot driver Installer From above
Step 3. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlock(open cmd " fastboot oem unlock-go" without qoutes)
Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .
tep7. Unlock bootloader using below Code try first if fail then unlock using second Code
fastboot flashing unlock
or
fastboot oem unlock-go
Step8. Rename twrp into recovery.img and put in adb Folder, To flash twrp Type-
fastboot boot recovery recovery.img(dont flash just boot)
Step9. Recovery is Now boot
Root Micromax Canvas Infinity-
Download Magisk latest(but i prefer magisk 15.1). Save it to Device storage [internatl/ external].
In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Go to Install tab and Locate Download magisk and confirm Install, wait For Success Done.
[installed] make a System Reboot By this Command
fastboot reboot
first boot may time pls just wait if sucess press thanks button
thanks you xda
Click to expand...
Click to collapse
Hello george simbu, actually you missed out couple of steps in this flashing process, when i tried using boot with recovery nothing happens, but when i flashed twrp the mobile goes into bootloop.
So how did i solved it, after flashing twrp i run the boot command in adb i.e. Fastboot boot recovery recovery.img, and then i finally be able to get my device out of bootloop
---------- Post added at 06:27 PM ---------- Previous post was at 06:24 PM ----------
george.simbu said:
This right recovery and one member also sucess I am not fool mind you words
Click to expand...
Click to collapse
And youre not fool, but next time when you try and make a tutorial please try put most of the processes into it, it actually helps the new people whose trying the flashing first time. Even i had a hard time sorting things with adb and fastboot command. It would be much appreciated if i would've got all of those command in just one place rather than going over and searching all of the internet for those commands
Foxhoundalpha said:
Hello george simbu, actually you missed out couple of steps in this flashing process, when i tried using boot with recovery nothing happens, but when i flashed twrp the mobile goes into bootloop.
So how did i solved it, after flashing twrp i run the boot command in adb i.e. Fastboot boot recovery recovery.img, and then i finally be able to get my device out of bootloop
---------- Post added at 06:27 PM ---------- Previous post was at 06:24 PM ----------
And youre not fool, but next time when you try and make a tutorial please try put most of the processes into it, it actually helps the new people whose trying the flashing first time. Even i had a hard time sorting things with adb and fastboot command. It would be much appreciated if i would've got all of those command in just one place rather than going over and searching all of the internet for those commands
Click to expand...
Click to collapse
yes iam re edits step if worng say iam changed
Error this device Micromax hs2
Milkhu said:
Error this device Micromax hs2
Click to expand...
Click to collapse
Factory reset and try again must bootloader unlock
Okay, for all those who are getting errors whatsoever, here i would like to tell you that i followed these steps and flashed twrp and rooted my device with magisk.. as explained by author..
1) unlock bootloader ( make sure to enable developer options, check unlock oem option, check debug option, check unknown sources in security option)
Use "fastboot oem unlock-go" as it worked for me on my canvas infinity hs2.
2) now after your fone is resetted after unlocking, do the initial setup with setting up account etc and once you at home screen go to settings and once again enable developer options, check unlock oem option, check debug option, check unknown sources in security.
Then connect fone to pc, you'll get adb promt on fone screen, allow it and on pc cmd type "adb reboot bootloader"
Then volume up on fone.
And on pc cmd type
Fastboot flash recovery twrp.img
(Well the author told to use boot command instead of flash, but boot didn't work for me so i used fastboot flash recovery twrp.img
Once this is done type
Fastboot reboot
And as the fone is about to reboot, quickly press volume down for twrp to load. Then you can transfer magisk from pc while twrp is on screen. And install magisk provided in the link.
Reboot and you will see your fone rooted. Voila. Done.
George.simbu did u ported any roms like lineage/RR for micromax canvas infinity
---------- Post added at 07:26 PM ---------- Previous post was at 07:25 PM ----------
I am just a noob and dont want to try porting roms on my hs2 as im afraid i might mess up my phone doing so
Foxhoundalpha said:
George.simbu did u ported any roms like lineage/RR for micromax canvas infinity
---------- Post added at 07:26 PM ---------- Previous post was at 07:25 PM ----------
I am just a noob and dont want to try porting roms on my hs2 as im afraid i might mess up my phone doing so
Click to expand...
Click to collapse
No brother
I tried to get magisk to work after installing the latest OTA and I did something wrong and had to wipe all the data from the Oneplus recovery menu. Towards the end in TWRP while wiping, I wiped off the OS by mistake. After clicking reboot, it just rebooted to the fastboot menu and when I click 'Go to recovery' on the fastboot menu it just boots back to the fastboot menu. My device is not being detected in powershell when I type in adb devices and it might be because after the first wipe that happened I didnt turn on adb debugging. I do not have twrp and my device is not being detected by my pc in powershell for me to adb push the whole os and twrp and flash them. I am literally freaking my skin off at this moment. Please help me. If I didnt mention any important detail please ask, Im super frightened so I might have missed something.
tl dr: No OS, no TWRP and locked in fastboot. (thanks to null0seven)
prathk said:
I tried to get magisk to work after installing the latest OTA and I did something wrong and had to wipe all the data from the Oneplus recovery menu. Towards the end in TWRP while wiping, I wiped off the OS by mistake. After clicking reboot, it just rebooted to the fastboot menu and when I click 'Go to recovery' on the fastboot menu it just boots back to the fastboot menu. My device is not being detected in powershell when I type in adb devices and it might be because after the first wipe that happened I didnt turn on adb debugging. I do not have twrp and my device is not being detected by my pc in powershell for me to adb push the whole os and twrp and flash them. I am literally freaking my skin off at this moment. Please help me. If I didnt mention any important detail please ask, Im super frightened so I might have missed something.
Click to expand...
Click to collapse
You should be able to use TWRP to reflash the OS. Personally, I would put the device in EDL mode and use the MSM Tool to put the device back to factory stock. Once back to stock, you can get your OTA and then reflash TWRP and root your device once again.
jcsww said:
You should be able to use TWRP to reflash the OS. Personally, I would put the device in EDL mode and use the MSM Tool to put the device back to factory stock. Once back to stock, you can get your OTA and then reflash TWRP and root your device once again.
Click to expand...
Click to collapse
I am not able to use TWRP. In the fastboot menu when I enter the 'Go to Recovery' option it just reboots back to the fastboot menu.
I'm relatively a noob in all this so if there's any other way please mention it.
UPDATE: I am currently downloading the stuffs required for the MSM tool, the download is extremely slow. Will check back once the download is done and I tried it. Thanks for atleast giving me some hope in the time being.
jcsww said:
You should be able to use TWRP to reflash the OS. Personally, I would put the device in EDL mode and use the MSM Tool to put the device back to factory stock. Once back to stock, you can get your OTA and then reflash TWRP and root your device once again.
Click to expand...
Click to collapse
While in the MSM tool after clicking 'Start', I got a 'Sahara Communication Failed' error. What do I do now?
UPDATE: Another problem right now is that after holding the volume up and down buttons simultaneously for a few seconds and inserting the cable to enter EDL mode (it shows as Qualcomm HS-USB QDLoader 9008 in device manager), within a few seconds the phone reboots into the fastboot again.
Sahara error it's not a real error. After that MSM does not finish installing OS?
But first try FastBoot rom :
https://forum.xda-developers.com/on...fastboot-roms-oneplus-7-pro-t3931424#poststop
Choose the one you need. For example i need GM31BA (european version)
null0seven said:
But first try FastBoot rom :
https://forum.xda-developers.com/on...fastboot-roms-oneplus-7-pro-t3931424#poststop
Click to expand...
Click to collapse
This.
---------- Post added at 02:02 PM ---------- Previous post was at 02:00 PM ----------
prathk said:
IAfter clicking reboot, it just rebooted to the fastboot menu and when I click 'Go to recovery' on the fastboot menu it just boots back to the fastboot menu. My device is not being detected in powershell when I type in adb devices and it might be because after the first wipe that happened I didnt turn on adb debugging.
Click to expand...
Click to collapse
adb won't work in fastboot, by definition (only works in OS and TWRP). Fastboot mode is for fastboot (and fastboot does not need debugging to be on). And fastboot is what you want, to flash the stock ROM.
null0seven said:
Sahara error it's not a real error. After that MSM does not finish installing OS?
But first try FastBoot rom :
https://forum.xda-developers.com/on...fastboot-roms-oneplus-7-pro-t3931424#poststop
Choose the one you need. For example i need GM31BA (european version)
Click to expand...
Click to collapse
No, its written waiting for communication with device and the app stops responding. I would attach a screenshot of the error but I myself am not able to try this method again (Check the update in my previous post).
UPDATE: I'm currently downloading the fastboot ROM. Hope it works.
He, prathk,
write that it's locked on Fastboot. NO twrp, no OS. That's why i suggest Fastboot rom, before MSM tool.
---------- Post added at 07:11 PM ---------- Previous post was at 07:06 PM ----------
(it shows as Qualcomm HS-USB QDLoader 9008 in device manager),
this is GOOD. youre phone drivers are corect. Remove the cable from phone.
Do this :
With phone off hold both volume buttons only and plug cable into computer .
Or power off the phone. Press vol. UP, 5to 10 seconds, plug the cable.
Youre problem with MSM tool it's that the phone it's not shut OFF !
null0seven said:
He, prathk,
write that it's locked on Fastboot. NO twrp, no OS. That's why i suggest Fastboot rom, before MSM tool.
---------- Post added at 07:11 PM ---------- Previous post was at 07:06 PM ----------
(it shows as Qualcomm HS-USB QDLoader 9008 in device manager),
this is GOOD. youre phone drivers are corect. Remove the cable from phone.
Do this :
With phone off hold both volume buttons only and plug cable into computer .
Or power off the phone. Press vol. UP, 5to 10 seconds, plug the cable.
Youre problem with MSM tool it's that the phone it's not shut OFF !
Click to expand...
Click to collapse
Thanks for the suggestion in your previous post, I added it.
I tried both the methods and both resulted in 'Sahara Communication Failed'.
And now even on trying both the methods it keeps restarting to the fastboot menu.
If the phone it's not off MSM not working.
Alternatively you can force your OnePlus 7 Pro to boot to EDL mode by the following steps:
Power off the phone.
Plug in the USB cable your computer but do not connect the other end to the phone.
Hold down Volume Up and Volume Down buttons for a few seconds, and plug in the cable while you are continuing to hold them.
You should see the anticipated EDL mode.
As advised before, you need to download the fastboot package made by @mauronofrio
Run the "flash-all-partitions.bat" while in fastboot.
You seemed mebbe confused before, adb and fastboot are different, adb is only to be used either within the rom or while in recovery. Fastboot is to be used while you're in Fastboot mode. It will still let you flash multiple partitions, hence why the fastboot fix should work.
For future reference, the best way to wipe data while leaving the rom intact is "fastboot -w", that will also remove encryption. (The flash-all-partitions batch file will do this too)
As long as you get a result after typing "fastboot devices" then you should be ok.
I flashed the Fastboot ROM as many of you suggested and it worked. Thanks to everyone who helped out and also thanks for correcting my knowledge. I just want to know if I'll still be getting OTA updates as usual or should I manually download it and flash it from now onwards.
prathk said:
I flashed the Fastboot ROM as many of you suggested and it worked. Thanks to everyone who helped out and also thanks for correcting my knowledge. I just want to know if I'll still be getting OTA updates as usual or should I manually download it and flash it from now onwards.
Click to expand...
Click to collapse
If you've flashed the default partitions you should get OTA, if you flash TWRP and root then you'll download the entire new rom, you don't get an OTA option.