Today I tried to flash a new ROM and basically bricked my Z3. However, I was able to install a stock firmware and got the phone working perfectly again. Problem is, I want to install a new ROM (elsewhere in the forum) but I have lost my recovery mode and fastboot mode. Can anyone explain how I can get them back or install a new one? I tried flashing the TWRP recovery onto the phone but it keeps coming back with an error. My phone is not bootlocked and is rooted. I just want some kind of recovery options. Please help.
Thanks in advance :good:
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
darkdevu said:
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------
To flash twrp you must have unlocked bootloader and if you want to flash on locked bootloder download nuts dual recovery.
For fastboot switch off the phone and hold vol up and plug in the usb voila if you see blue led.
Click to expand...
Click to collapse
My bootloader IS unlocked but still can't flash it. Fastboot not working either.
1974darrenh said:
My bootloader IS unlocked but still can't flash it. Fastboot not working either.
Click to expand...
Click to collapse
Try another PC or laptop to flash.
darkdevu said:
Try another PC or laptop to flash.
Click to expand...
Click to collapse
Is it possible to flash a new ROM without a working recovery? Any apps I can use?
I also downloaded TWRP manager and tried to install it but it comes back with an error.
Related
Yes, first of all i read all other Threads with the Words (Stuck and Google Logo) and i use Google. I spent yesterday about 5hours und could not fix the Problem.
So, i tried to install a ROM (CM9), i do that with the Guide from nexusshack..
I think somewhere between (Wipe System) i got the Problem. Now my Nexus S Stuck in the Boot - i made some Screenshots.
Maybe someone can help me?
same problem here any help?
Would be useful if you could point out your nexus S model...
Anyway, since you have access to bootloader, just flash cwm recovery with fastboot, go in recovery and wipe all, mount USB from inside recovery and transfer another rom for your model to the SD card. After that just flash the new rom and it should work.
nexus s 19020a
Yup....just flash custom recovery....then you can flash other rom..
Hey guys,
like mentioned in my thread before a week ( I will let it die ;-) ) I got the same problem with an I9023.
I flashed factory images including bootloader and radio,cwm-recovery via fastboot, every single action succeeded, but I still got stuck in this *%&/(()-Google-Screen. I cannot boot into recovery, only bootloader is working.
i have the same problem does any one have a suggestion !!
thanks in advance
Had the same issue about one month ago. It was when I installed CM9, there were missing drivers. Do not remember, which exactly.
What do you mean with 'drivers'?
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
chanduwatkar14344 said:
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Click to expand...
Click to collapse
u have this driver ?? http://pdanet.co/
do u got any solution for this...i too have same problem...
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
---------- Post added at 01:43 PM ---------- Previous post was at 01:37 PM ----------
yes i have...but,i don't know how to deal with that...so,plzz help me if u ca..would be helpful forme
---------- Post added at 01:51 PM ---------- Previous post was at 01:43 PM ----------
can u plzz give me the detail that how to that,would be helpful for me to do easily..plzzzz help
nexus S was in locked state...can't able to unlock thorugh "fastboot oem unlock" (FAILED <remote:ERASE FAIL>.. even all drivers were installed properly...if i try to get in to recovery mode there is an exclamtion mark...what it that..???
Flash Stock Rom using ADB
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
thxlu said:
Try to flash Stock Rom Using Adb in Fastbootmode
Then Install CWM
then You can Install Custom ROMS
Click to expand...
Click to collapse
can' flash anything..it shows that i need to unlock the bootloader & the main problem im facing is can't unlock bootloader in fastboot mode withthe command "fastboot oem unlock"...
---------- Post added at 02:55 PM ---------- Previous post was at 02:27 PM ----------
trevdog said:
It means you have no recovery installed... Use Odin to flash a stock rooted Rom then flash recovery you must have erased everything now you need to start from scratch...
Click to expand...
Click to collapse
how to use odin to flash a stock rom..my nexus s bootloader is locked & can't able to get unlock in fastboot mode with the command "fastoot oem unlock"..plzzz help
Hi guys! Im on 4.4.4 with unlocked bootloader, the only way to root this device that i found on the internet is to use locked bootloader tutorials.
Is there any easy way to root unlocked bootloader D2303 on 4.4.4 18.3.1.C.1.15? I tried flashtool but when it installs towel root and i press make it rain! it says this device is not supported. Thanks in advance!
Here is one easiest way, but its over chinese app called KingRoot.
1. Download latest KingRoot.
2. Press Root button
3. Allow USB debug in Developer settings(Tap 10 times in Phone info on Build number to get Dev. settings)
4. Install Philz Recovery
5. Flash SuperSU V.249 BETA! Important!
6. Flash RICDefeat.zip
Same way is described here
http://forum.xda-developers.com/xperia-m2/general/how-to-permanently-root-xperia-m2-t3106534
But dont forget to flash SuperSU V2.49 BETA and RICDefeat & remove KingRoot apps.
Lothgar said:
Hi guys! Im on 4.4.4 with unlocked bootloader, the only way to root this device that i found on the internet is to use locked bootloader tutorials.
Is there any easy way to root unlocked bootloader D2303 on 4.4.4 18.3.1.C.1.15? I tried flashtool but when it installs towel root and i press make it rain! it says this device is not supported. Thanks in advance!
Click to expand...
Click to collapse
Update your bootloader using emma, then flash a recovery like CM12.1 Recovery from here: http://www.mediafire.com/download/lfub133wy5833bx/recovery.img and flash with it SuperSU zip and RICdefeat. Then you're done.
---------- Post added at 12:06 ---------- Previous post was at 12:05 ----------
Enycz11 said:
Here is one easiest way, but its over chinese app called KingRoot.
1. Download latest KingRoot.
2. Press Root button
3. Allow USB debug in Developer settings(Tap 10 times in Phone info on Build number to get Dev. settings)
4. Install Philz Recovery
5. Flash SuperSU V.249 BETA! Important!
6. Flash RICDefeat.zip
Same way is described here
http://forum.xda-developers.com/xperia-m2/general/how-to-permanently-root-xperia-m2-t3106534
But dont forget to flash SuperSU V.249 BETA and RICDefeat & remove KingRoot apps.
Click to expand...
Click to collapse
Actually that's a locked bootloader method.
And Kingroot also sends your IMEI info to chinese unknown servers...
linuxct said:
Update your bootloader using emma, then flash a recovery like CM12.1 Recovery from here: http://www.mediafire.com/download/lfub133wy5833bx/recovery.img and flash with it SuperSU zip and RICdefeat. Then you're done.
---------- Post added at 12:06 ---------- Previous post was at 12:05 ----------
Actually that's a locked bootloader method.
And Kingroot also sends your IMEI info to chinese unknown servers...
Click to expand...
Click to collapse
Thanks! Trying right now!
linuxct said:
Update your bootloader using emma, then flash a recovery like CM12.1 Recovery from here: http://www.mediafire.com/download/lfub133wy5833bx/recovery.img and flash with it SuperSU zip and RICdefeat. Then you're done.
---------- Post added at 12:06 ---------- Previous post was at 12:05 ----------
Actually that's a locked bootloader method.
And Kingroot also sends your IMEI info to chinese unknown servers...
Click to expand...
Click to collapse
Wait! How to flash recovery? Via flashtool by androxyde or emma?
EDIT: Tryed via fastboot the cm12 recovery, all what i got is grey screen with blue lines yey.
Lothgar said:
Wait! How to flash recovery? Via flashtool by androxyde or emma?
EDIT: Tryed via fastboot the cm12 recovery, all what i got is grey screen with blue lines yey.
Click to expand...
Click to collapse
But you have to do a fastboot flash recovery recovery.img . Did you do that ?
linuxct said:
But you have to do a fastboot flash recovery recovery.img . Did you do that ?
Click to expand...
Click to collapse
Yep.
Lothgar said:
Yep.
Click to expand...
Click to collapse
Then there's no reason to happen that. The lines appear when you boot it normally or when you try to enter recovery by keep holding the Vol- button?
In my D2303 is fine working...
linuxct said:
Then there's no reason to happen that. The lines appear when you boot it normally or when you try to enter recovery by keep holding the Vol- button?
In my D2303 is fine working...
Click to expand...
Click to collapse
The phone is off. I press the power button it vibrates, then for 5-6 second the screen is black. Then the lines shows up and no boot. Vol- pressed or not is the same.
EDIT: Reflashed now only if i try to enter recovery the lines shows up!
Lothgar said:
The phone is off. I press the power button it vibrates, then for 5-6 second the screen is black. Then the lines shows up and no boot. Vol- pressed or not is the same.
Click to expand...
Click to collapse
Go in fastboot mode and run fastboot erase recovery .
Again, I see no reason why this could be happening as this recovery runs in it's partition, isolated, so if you don't run it (Vol- button from the beggining) then it should not interfere with device boot up. Try flashing the latest kernel from the .15 ftf also.
linuxct said:
Go in fastboot mode and run fastboot erase recovery .
Again, I see no reason why this could be happening as this recovery runs in it's partition, isolated, so if you don't run it (Vol- button from the beggining) then it should not interfere with device boot up. Try flashing the latest kernel from the .15 ftf also.
Click to expand...
Click to collapse
I reflashed the recovery trough fastboot and now only if i try to boot recovery the blue lines shows up. I think that is a problem of the recovery.
Lothgar said:
I reflashed the recovery trough fastboot and now only if i try to boot recovery the blue lines shows up. I think that is a problem of the recovery.
Click to expand...
Click to collapse
Maybe is a screen driver problem, but on a D2303?? For me it's working
linuxct said:
Maybe is a screen driver problem, but on a D2303?? For me it's working
Click to expand...
Click to collapse
I remember that you gave me and alternative recovery for the locked bootloader becouse the standard doesn't working. Maybe the same issue?
Lothgar said:
I remember that you gave me and alternative recovery for the locked bootloader becouse the standard doesn't working. Maybe the same issue?
Click to expand...
Click to collapse
No, it shouldn't as the problem only was the GPIO Keys... Not screen driver problem... But yes, looks like you can't use the CM Recovery.
Format your fastboot partition with fastboot erase recovery and use the locked bootloader procedure... What a pity.
linuxct said:
No, it shouldn't as the problem only was the GPIO Keys... Not screen driver problem... But yes, looks like you can't use the CM Recovery.
Format your fastboot partition with fastboot erase recovery and use the locked bootloader procedure... What a pity.
Click to expand...
Click to collapse
I'll try but i dont know how to get the root because the procedure of downgrading the kernel doesn't work i tryed several times!
Here what i got:
Lothgar said:
I'll try but i dont know how to get the root because the procedure of downgrading the kernel doesn't work i tryed several times!
Here what i got:
Click to expand...
Click to collapse
But that pic is from CM recovery or from kernel downgrade?
And in what step you get stuck in the kernel downgrade root method?...
linuxct said:
But that pic is from CM recovery or from kernel downgrade?
And in what step you get stuck in the kernel downgrade root method?...
Click to expand...
Click to collapse
CM recovery. If i downgrade the kernel the adb doesn't start! And yes is enabled in the settings.
EDIT: Solved trying now for the locked bootloader method!
Installed philz recovery with locked bootloader method but i cant flash omnirom! (status 7)
My s6 turns on but only black screen is on after the logo .
My pic sees it with the black screen if I turn on download mode to recover the phone - flash stock my pc does not see it I tried windows 10 and windows 7 different USB ports and cables nothing seems to work the phone is full stock no custom recovery
Any suggestions anyone
szelingo said:
My s6 turns on but only black screen is on after the logo .
My pic sees it with the black screen if I turn on download mode to recover the phone - flash stock my pc does not see it I tried windows 10 and windows 7 different USB ports and cables nothing seems to work the phone is full stock no custom recovery
Any suggestions anyone
Click to expand...
Click to collapse
Are you flashing a stock zip file or stock img file?
---------- Post added at 03:45 AM ---------- Previous post was at 03:44 AM ----------
anthromg said:
Are you flashing a stock zip file or stock img file?
Click to expand...
Click to collapse
I would flash a custom recovery in ADB and then flash a stock rom image via the recovery.. if possible. That worked for me once when nothing else did.
anthromg said:
Are you flashing a stock zip file or stock img file?
---------- Post added at 03:45 AM ---------- Previous post was at 03:44 AM ----------
I would flash a custom recovery in ADB and then flash a stock rom image via the recovery.. if possible. That worked for me once when nothing else did.
Click to expand...
Click to collapse
how do i flash custom recovery with adb ?? i can see the phone with adb when i type ADB DEVICES but when i type anything else with adb for example like adb flash ......
it does not want to work without response from the phone like it wants me to allow connection from the phone
szelingo said:
how do i flash custom recovery with adb ?? i can see the phone with adb when i type ADB DEVICES but when i type anything else with adb for example like adb flash ......
it does not want to work without response from the phone like it wants me to allow connection from the phone
Click to expand...
Click to collapse
Does the computer recognize the phone once it's in fastboot or download mode?
Sent from my HTC One M9 using Tapatalk
My computer recognises the phone only when it's on but black screen when I turn on download mode it doesn't see it and by the way how I get it to fastboot
Tried smart switch emergency initialization with sn of the phone?
If u need help with it I made step by step instructions, check threads created by me in my profile.
Hi,
I want to install TWRP so I tried rebooting to bootloader by using adb, which didn't work, and I tried rebooting to the bootloader by rebooting to bootloader from recovery mode, which didn't work either, whenever I try it boots normally and just goes to my sim code screen. It's a G920F with stock firmware, my phone notified me of a software update is this the problem?
There's no "bootloader mode" on Samsung devices.
Hi,
There's no bootloader mode on Samsung, instead you get the Download screen. To get to it, just turn off your device, then turn it on using volume down+home+power buttons. You can then proceed to install TWRP using Odin through it.
All the best,
~Lord
Sent from my SM-G935F using Tapatalk Pro
WRONG
forumber2 said:
There's no "bootloader mode" on Samsung devices.
Click to expand...
Click to collapse
I have the same problem.. Cant root my phone because there is no bootloader to turn off... And yes when you go into original recoverymode there is a bootloader option... But it just don't work..
---------- Post added at 02:35 AM ---------- Previous post was at 02:33 AM ----------
There is a bootloader option in samsung recovery so you are wrong.. And yes it does not work....
I have the same problem..
So I recently unlocked the bootloader on my Honor 6x and it is now stuck on the screen saying "Your device has been unlocked and can't be trusted" and the pesky "Your device is booting now message....". I am unable to get into fastboot mode, and so far no chances of booting into eRecovery. Any known fixes?
Do a clean flash of your ROM through dload method
in same situation.. any help pleasee ?
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
but i have access to fastboot..
This also happened to me. I cant get to fastboot and the phone was stuck on "You're device is booting now...".
What I did is I let the phone drain its battery. After draining the battery, I tried to access fastboot mode. Holding down volume button and connecting the USB cable, the phone booted into the erecovery mode instead of fastboot mode. So I did a data wipe. After performing wipes, I tried to boot into fastboot mode again, and it worked. So I flashed the recovery, ramdisk, and kernel images. After which, I flashed the system again in TWRP and it was successful. ? Now my phone boots normally. ?
i have the same problem. i cant boot in fastboot or recovery...
player615 said:
i have the same problem. i cant boot in fastboot or recovery...
Click to expand...
Click to collapse
Try Dload or let it drain of battery. Next plug-in USB when it turns on hold Volume Up and boot into eRecovery.