Related
Based on Samsung Stock Roms for GTI9305:
- Stable and smooth
- Rooted, Deodexed, Zipaligned, Busybox added
- unbranded, boot sound renamed
- without any mods
- new bootloader isn't included!
- 5 Shortcuts possible add on Lockscreen
- defaultly set EN language, multilingual
All next it’s on your own risk!!!
About bootloaders:
- if you ever flash 4.3 or 4.4 via Odin or updated from OTA you have new Bootloader.
- if you bought your device and you dont know what bootloader you have, turn off your phone,reboot to download mode (hold power + volume down +home buttons) and when is there Knox flag 0x1 you have new and you are warranty off. When Knox flag is there 0x0 you have also new bootloader, but you are still in warranty and when you'll flash any custom recovery or unofficial firmware via Odin, you'll have then Knox 0x1 and you will be warranty off - so it's on your deciding. When isn't in download mode any records about about Knox, you still have old bootloader (btw congratulation ) and don't ever flash via Odin 4.3 and higher firmware - it's a pity.
PS: exit from download mode: hold pressed power button cca 5 seconds
Downloads:
I9305XXUFNL1 KK 4.4.4 (CSC NEE - Nordic countries, modem XXUFOA1):
Release for old and new bootloader - AGNi Kernel 5.50 with Boeffla Sound:
I9305XXUFNL1_KK_CWM_Root_DEOdex_Ziplgn_AGNI_v5_5BS.zip
Release only for new bootloader - Stock Kernel:
I9305XXUFNL1_KK_CWM_Root_DEOdex_Ziplgn_StockKernel.zip
I9305XXUFNJ1 KK 4.4.4 (CSC XEO - Poland, modem XXUFNJ1):
Release for old and new bootloader - AGNi Kernel 5.00 with Boeffla Sound:
I9305XXUFNJ1_KK_CWM_Root_DEOdex_Ziplgn_AGNI_v500BS.zip
Release only for new bootloader - Stock Kernel:
I9305XXUFNJ1_KK_CWM_Root_DEOdex_Ziplgn_StockKernel.zip
-Roms reuploaded 9th November 2014 (fixed modem)
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3):
Release R3 - use on old bootloader - Hbohd kernel v0.2:
I9305XXUFNI3_KK_CWM_R3_Root_DEOdex_Ziplgn_HboKernel_v2.zip
MD5: 30f189d7620db2bed6cf48c34d0400b4
Release R2 - use on new bootloader - Stock Kernel:
I9305XXUFNI3_KK_CWM_R2_Root_DEOdex_Ziplgn_StockKernel.zip
MD5: 3bdcb9bcb3a18f9f7c85c398e2bccd14
Samsung Hub FIX for R2 and R3 HERE .... just flash it, however you'll lose possibility add 5 Short-cuts on Lockscreen
Screenshots - in 2nd post and in attachment
Changelogs - in 3th post
Customize as you like and wish!
- for good improvements I recommend install Wanam Xposed from market
- for cleaning of Bloatware you can use Rom cleaner from S4, guide you will find there, download possible HERE
Installation Instructions:
- first of all backup all your data from internal SD card, 4.3 and 4.4 has different structure tree from 4.1.2!!!
- if you go from 4.1.2 or older I recommend format internal card, if you don’t do it, on internal card were by me still data (DCIM etc...) and you can’t normal access them on 4.3, but even without formatting you can later move them from old folder to new one in 4.3 with Aroma file manager , for me easer way without format. Also is possible, that files will move automatically – also me happened
- be sure, you have EFS backup!!!
- create NanDroid backup to external card!!!
- download the *.zip file to external card!
- download to Recovery, recommended is only PHILz
- ROM isn’t full wipe, but is recommended if you get from any older
- wipe cache and Dalvik cache is automatically included
- select ZIP file from external card and install
- don’t use re-root after installation inside recovery - you don’t need it, if you'll do, then you need install again SU apk from market
- reboot and wait and wait ...
- enjoy it
- IF YOU WILL HAVE PROBLEM WITH ROOT TRY MAKE UPDATE AND APPLY SUPERUSER VIA MARKET ( then open SU and update binary and disable Knox and enjoy), OR RE-ROOT VIA CUSTOM RECOVERY (only PhilZ is recommended), THEN YOU HAVE TO AGAIN INSTALL AND APPLY SUPERUSER APK FROM MARKET.
- ON NEW BOOTLOADER AFTER INSTALLATION I RECOMMEND YOU MAKE STATUS SELINUX PERMISSIVE VIA WANAM XPOSED OR SELinux Mode Changer .....IF YOU WILL NOT MAKE THIS STATUS, ARE EXPECTED PROBLEM WITH ROOT
- If your camera doesn't work primary flash this Camera Patch. It should works . For interesting here are also older instruction: follow this (thanks @Hbohd and @P$T), if you don't have incriminated file flash relevant Stock kernel from HERE - Wifi doesn't work with old bootloader, then take photo and short video, then flash again your Rom without full wipe with kernel which you like. If your camera still doesn't work follow THIS or flash some Rom 4.1.2 (via Recovery or Odin) take picture, grab and backup incriminated files, then flash this Rom and put them to data/cwm. Don't forget backup your SlimISP_XX.bin for future. Problem with camera have only some users - Samsung issue.
Working Modems:
use version for KK from HERE
Info for devs:
If you want use this Rom or part as base for your Rom, Mods, just give me credit with link in your OP
Credits:
@Hbohd for HboKernel...you must give him BIG THX! He is the 1st, who made custom kernel for us on KK 4.4.4
@psndna88 for AGNi kernel
@Chainfire for CF-Auto-Root!
@MaHo_66 for his willingness to test it, feedback and making Screenshots
@FLooDW for his willingness to test it and feedback
- to some others here!
- to Samsung
XDA:DevDB Information
[ROM][GTi9305 LTE version][KK4.4.4] ▌Official Stock Rom ▌, ROM for the Samsung Galaxy S III I9300
Contributors
kenar2
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-12
Last Updated 2015-01-28
Screenshots:
Change log:
I9305XXUFNL1 KK 4.4.4 (CSC NEE - Nordic countries, modem XXUFOA1): - 27th January 2015
- version with Stock and AGNi kernel
ROMs I9305XXUFNJ reuploaded - 9th November 2014 (fixed modem)
I9305XXUFNJ1 KK 4.4.4 (CSC XEO - Poland, modem XXUFNJ1) - 7th November 2014
- version with Stock and AGNi kernel
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3) - Release R3 - 1st October 2014
- version with HboKernel, primary is R3 for users on old bootloader
I9305XXUFNI3 KK 4.4.4 (CSC DBT - Germany, modem XXUFNI3) - Release R2 - 30th September 2014
- Stable and smooth
- added all Stock apps
- fixed apks
- improved SU
Initial Release - 29th September 2014
Thanks dude!
Ahh, smaller filesize than 4.3... I'll try clean flashing from aosp, I hope it works and I don't have to flash a 4.1.2 stock rom first or something.
Yes smaller.
From Aosp just full wipe
Edit: R2 is a little larger
Now this is some good news mate :good: gonna download it now and if it boots and all works fine I will use as my official base for S5 Elite
Thanks
EDIT: oke, some feedback on the rom
-boots fine
-wifi works
-had some troubles updating the SU binary, solved applying reroot using philz recovery
-manually pushed supersu.apk to phone and installed, cause play store wouldnt open, giving FC
-updated google play services and rebooted and got 2 or 3 more FC's from google related components
-seems overall nice and smooth
-sometimes freezes when trying to open Super SU app, pressing home button solves it though
-samsung apps are removed i guess, didnt saw it in the rom
So this far of my tests, only google related stuff is not working and to be honest, i dont believe rom will boot if i transfer S5 Elite to this base without a 4.4.4 custom kernel updated, but i'll give it a try anyway
Ok very thank you!
Did you make Status SeLinux Permissive and applied towel root before? It should solve SU problems.
Edit: i confirm, Samsung apps aren't included, ill add.
Edit2: added to R2, solved all problems
i would help testing but i urgently need gps and my phone working for a few days coz ii have to go somwhere. Sorry for stupid useless post. I will help testing at the end of the weeek
1. where should I seek for stock kernel (my brother's phone has 4.3 bootloader
2. What recovery is suitable? Like for CM11 - tweaked 2.7.0 TWRP? Or it doesn't mind which one?
bestfil said:
1. where should I seek for stock kernel (my brother's phone has 4.3 bootloader
2. What recovery is suitable? Like for CM11 - tweaked 2.7.0 TWRP? Or it doesn't mind which one?
Click to expand...
Click to collapse
It doesn't mind, everyone is suitable i think
kenar2 said:
Ok very thank you!
Did you make Status SeLinux Permissive and applied towel root before? It should solve SU problems.
Samsung apps I'll check. I also don't know, why is missing SMemo and apks which I already added. The same problem with apps are on ported roms for S3 too
Edit: i confirm, Samsung apps arent included, ill add.
Click to expand...
Click to collapse
I think i know why the ported apps for the s3 roms dont work, probably youve figured it too, because of the s5 framework they work on the s5 roms, but not with s3 framework of 4.4.4, sounds logical enough to me, right?
Downloaded this version from sammobile 2 days ago... Seems stable.. Also tested this one.. Seems to work fine so far... The camera bug which I kept having constantly on other cm based 4.4.2 seems to bd fixed.. I flashed stock rom before but that didn't even fix the camera, but this one does.
Just curious : any way to remove all the Samsung bloatware with one script or app ?.. Seems to be draining the battery a lot! ?
Sent from my GT-I9305N using Tapatalk
If I have 4.3 bootloader, wifi doesn't work? Because wifi isn't working for me.
MaHo_66 said:
I think i know why the ported apps for the s3 roms dont work, probably youve figured it too, because of the s5 framework they work on the s5 roms, but not with s3 framework of 4.4.4, sounds logical enough to me, right?
Click to expand...
Click to collapse
no, no i didnt use them ..... now compiling new version with sasmung apps, and with others missing apps (will be contain the same apps as from Odin) - will solve problem with market too
Edit: and yes, for 4.4.4 must be used stuff from S5 4.4.4 .... I think in S3 threads people works on it
bestfil said:
If I have 4.3 bootloader, wifi doesn't work? Because wifi isn't working for me.
Click to expand...
Click to collapse
Yes. Wifi works only on new bootloader, we haven't Custom kernel for old bootloader ;(
kenar2 said:
Yes. Wifi works only on new bootloader, we haven't Custom kernel for old bootloader ;(
Click to expand...
Click to collapse
I still don't understand. I don't know which bootloader do I have.
I used http://forum.xda-developers.com/gal...tock-sgsiii-i9305-prerooted-firmware-t1935570 and it says:
Code:
D:\ANDROID\ANDROID-SDK\sdk\platform-tools>adb shell
[email protected]:/ $ su
su
/system/bin/sh: su: can't execute: Permission denied
126|[email protected]:/ $ getprop ro.boot.bootloader
getprop ro.boot.bootloader
I9305XXBMJ1
[email protected]:/ $
which is propably 4.1.2's Polish ROM = 4.1.2 bootloader.
As far as I understand You say that every bootloader which is not 4.4.4 will make wifi disabled?
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new and you are warranty off. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Edit: for more information you can find here topic about knox and bootloader.
kenar2 said:
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Click to expand...
Click to collapse
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
kenar2 said:
if you ever flashed 4.3 Rom or 4.4.4 via Odin you have new bootloader, if not, you have old.
You can reboot to download mode, and when is there Knox flag 0x1 you have new. If there isnt any records about Knox you have old and you have to wait for custom kernel.
I always recommend leave old bootloader, you'll not be warranty off
Click to expand...
Click to collapse
in addition to your info, AP SWREV 2 is 4.3 bootloader and AP SWREV 3 with blue text saying ''secure download enabled'' is 4.4.4 bootloader with enhanced security, thats causing us so much trouble, damn samsung with their crap of a KNOX and Bootloader****!
---------- Post added at 10:51 PM ---------- Previous post was at 10:44 PM ----------
bestfil said:
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
Click to expand...
Click to collapse
yes correct, but if i were you i would wait for a decent FW of 4.4.4 with a custom kernel, soon or later we'll get a new kernel one way or another, till then just wait and enjoy other roms. There is nothing special on 4.4.4 and you will be probably dissapointed with the 4.4.4 fw (at least i am) considering we had to wait so long for it...
bestfil said:
All lines from my bootloader left top status:
Code:
[COLOR="Red"][B]
ODIN MODE[/B][/COLOR]
PRODUCT CODE: GT-I9305
CUSTOM BINARY DOWNLOAD: Yes (9 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Is it 4.1.2?
If Yes than the only way to WIFI work would be installing newer (but worse) 4.3 or 4.4.4 bootloader?!
Click to expand...
Click to collapse
yes you have old, the best way for you is to wait for custom kernel, @Hbohd already started working on Boeffla
MaHo_66 said:
in addition to your info, AP SWREV 2 is 4.3 bootloader and AP SWREV 3 with blue text saying ''secure download enabled'' is 4.4.4 bootloader with enhanced security, thats causing us so much trouble, damn samsung with their crap of a KNOX and Bootloader****!
Click to expand...
Click to collapse
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install N3E92 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
Android File Host
Original Thread: Forum Turkdevs
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_N3E92" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
XDA:DevDB Information
[N3E92] Nougat Fastboot Stock, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Google
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
is there any way to decrypt /data with twrp? after a factory reset it always gets encrypted, and in twrp it asks for a password which i didn't set.
mjz2cool said:
is there any way to decrypt /data with twrp? after a factory reset it always gets encrypted, and in twrp it asks for a password which i didn't set.
Click to expand...
Click to collapse
Install custom kernel, visit turkdevs.com.
this tool won't work, it can't run cmdcolor.exe, with error 0xc000007b
mjz2cool said:
this tool won't work, it can't run cmdcolor.exe, with error 0xc000007b
Click to expand...
Click to collapse
google is my friend, not yours ??
http://www.pcadvisor.co.uk/how-to/w...t-correctly-0xc000007b-error-message-3613164/
https://www.youtube.com/watch?v=lIvPZjzAi_w
7dwergen said:
google is my friend, not yours ??
http://www.pcadvisor.co.uk/how-to/w...t-correctly-0xc000007b-error-message-3613164/
https://www.youtube.com/watch?v=lIvPZjzAi_w
Click to expand...
Click to collapse
true, and already solved it
After flashing it, is it really like stock?
Is it possible to get OTAs after flashing?
Sorry, but i normally only use the Nexus/Pixel Phones, there it is no problem to flash a factory image.
Leonerdo said:
After flashing it, is it really like stock?
Is it possible to get OTAs after flashing?
Sorry, but i normally only use the Nexus/Pixel Phones, there it is no problem to flash a factory image.
Click to expand...
Click to collapse
it's not like stock, it is stock. so you'll get ota updates
asderdd said:
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install N3E92 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
Android File Host
Original Thread: Forum Turkdevs
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_N3E92" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
XDA:DevDB Information
[N3E92] Nougat Fastboot Stock, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Google
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
Click to expand...
Click to collapse
hi! please need help after trying to flashed several fastboot stock rom i still can not get my gm5 + running, i'm still facing a bootloop! what should i do if you I have already tried with the stock rom aroma with twrp but still the same problem.With Cyanogen 13 I have baseband unknown and no imei!
asderdd said:
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install N3E92 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
Android File Host
Original Thread: Forum Turkdevs
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_N3E92" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
XDA:DevDB Information
[N3E92] Nougat Fastboot Stock, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Google
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
Click to expand...
Click to collapse
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
:laugh::laugh::laugh::laugh::laugh:
"without my permission. :""""
omg:laugh::laugh::laugh::laugh::laugh:
Please I'm getting and error "cmd color-bad image" mv102.DLL missing. Is there any way I can flash this rom with normal fastboot codes?
Does this still work? I have installed it and phone is stucked on general mobole screen
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the well known Build of Jiayu Germany Lollipop Release Candidate 5 (latest) for Jiayu S3 (Advance/Basic) with MTK 6752 SoC
There's also a modified version , for the new Jiayu s3 Pro ( with 32GB of internal memory ) also MTK6752
This is being posted here, as this is a full SPFlashTools "Base" ROM, usually used to recover your device
( or if you want to roll back to Lollipop ...)
The "REPACK" Version is simply the same RC5 Rom, but with latest M.A.D. TWRP already included
There's also a modified version for the s3 Pro (32GB)
The Rom should be flashed in "UPGRADE MODE" on SPFlashTools. (Doesn't matter in what ROM / OS you currently are ...)
DO NOT flash any SP Flash Tools Jiayu s3 (old 16gb) roms on the new Jiayu s3Pro (32GB)
--> Preloader, partitions are different, you'll get an hard brick.
Installation Instructions:
BACKUP EVERYTHING, This will ERASE everything from your internal phone memory (pics, videos, data, etc )
Turn OFF the phone
Open MediaTek SPFlashTools
Load mt6752 Scatter
Choose "Upgrade Mode"
Press "Download"
At this moment, plug USB Cable to phone, it'll start flash ...
Some Jiayu S3, require BOTH Volume Keys to be pressed , while you plug USB Cable to enter in "download Mode"
If you wish to upgrade to latest M.A.D. Android Nougat, after you flashed RC5, it's recommended that you let the RC5 boot up, then you can go back to recovery ( Latest M.A.D. Recovery included already)
Place AOSP Nougat Rom on internal memory/ external SDCard
WIPE ALL
Flash AOSP and GAPPS & SuperSu (latest two optional)
Download ROMs from "XDA DevDB Download Section"
Choose the right rom, for your Jiayu S3 variant (s3 advance / basic 16GB) or ( s3 pro 32GB )
Working:
Everything
The Rom Changelogs, and old discussion can be found on this thread :
https://forum.xda-developers.com/jiayu-s3/development/rom-jiayu-s3-5-1-1-t3217241
GPL Compliance:
https://github.com/MediatekAndroidDevelopers
XDA:DevDB Information
[ROM] [REPACK] [ 5.1.1 ] RC5 Lollipop Jiayu S3 & S3 Pro [MT6752], ROM for the JiaYu S3
Contributors
superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: SP Flash Tools
Based On: MediaTek AOSP
Version Information
Status: Stable
Created 2017-01-25
Last Updated 2017-01-25
Reserved
,,,,,,,,,,,,,,
Please include boot from AICP 10 (with fixed wi-fi hotspot).
superdragonpt said:
ROMs will take a while to be uploaded ...
slow speed...
Click to expand...
Click to collapse
thanks man.....
waiting for the s3 pro version....
My net provider is having issues, I currently have no home connection, hopefully they'll fix this today, for me to upload
Bb
ROMs being uploaded
superdragonpt said:
ROMs being uploaded
Click to expand...
Click to collapse
thank you so much...
hope flashing rc5 and then stable 7 fix my low signal connection on s3 pro
All done ...
Can you also upload the SPFT flash tool so that people would use a similar version and reduce variables and become easier to debug when a problem arises?
I'm sorry for the stupid question but are de download links?
Have searched in the download section but keeps sending me back to this post!
Enviado do meu Redmi Note 3 através de Tapatalk
Found it, sorry for double post!
Enviado do meu Redmi Note 3 através de Tapatalk
Upgrade successfull!
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.
AgiZ10 said:
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.
Click to expand...
Click to collapse
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...
superdragonpt said:
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...
Click to expand...
Click to collapse
Thanks, done.
Will continue replying there if something comes bugs me
A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.
StoneTheKiwis said:
A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.
Click to expand...
Click to collapse
I've just found that the recovery is the chinese one, not twrp. Reflashing just recovery does not change this. The build number is 20160302-190806. Any ideas on what might have happened here?
I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers
superdragonpt said:
I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers
Click to expand...
Click to collapse
Thanks for your reply. I've just done it all again - downloaded the PRO pkg afresh and flashed as 'upgrade', but again booting to recovery shows a chinese menu. I also flashed in 'format all' mode, but the same result. I'm downloading the pkg from the 'downloads' section of this forum, and it unpacks to show recovery as 'S3_h560_TWRP_3.0.2-0' at 13,074kb. The recovery from the old rc5 pkg is a different size - I suppose that can't be used without rewriting the scatter file? Or does the scatter file reference the recovery that's recommended for your latest 7.1.1 rom? I could just get that separately and copy it in.
Apart from blaming the pixies, I really don't understand what is going wrong here.
Stranger and stranger. I replaced the recovery with the one hosted on mediafire for 7.1.1 (though that has a space in the filename which had to be removed for the scatter txt to recognise it) and after flashing the phone was bricked. Then replaced recovery with the one from rc5 and again it was bricked. Then unpacked afresh the pro pkg and flashed with that in 'format all' mode - this time it booted to chinese recovery but refused to boot normally. Then reflashed in 'upgrade' mode and now it boots normally but refuses to boot to recovery. Perhaps the hardware has been changed even further, or perhaps the gods are just laughing at me, but I've run out of options now. The problem is that supersu won't install without updating itself (though it's 2.79) and it fails to update under the 'normal' update option and doesn't have a twrp recovery to update through. Hence the phone can't be rooted.
Sorry for this question, please how can I revert to this ROM I'm already on 7,1.2, what does repack means or how should I repack it ,any possible way to use spflashtool for this ROM, your answer is highly needed urgently please to whom ever knew
Hello, some time ago I rooted my device and installed a custom ROM. But since I've learned about the app GravityBox and it's functionalities, I've been wishing to go back to my device's original firmware, so I can use the app without fearing malfunctions. But I don't want to lose root access, nor TWRP during the process.
Back when I rooted my device, I found out that the latest versions don't have the option to allow bootloader disabling. I had some difficulties, but in the end I rooted the device by downgrading the firmware to a certain version that still had the option.
Now I've already downloaded the oldest firmware version available in Asus Zenfone Go Bios and Firmwares Official Page - which has the bootloader option - and passed it to the SD Card (same I had to do to install the Custom ROM). But that's about it, I haven't proceded any further for not knowing for sure what to do.
Device's info:
- Zenfone Go - ZC500TG/Z00VD
- Original Android version: 5.1 - Lollipop
- Current Mod ROM: Android 7.1.1 - Nougat
- Rooted
- SuperSU
- TWRP
- Xposed Framework
I would like change my oxygen version from international (AA) to european (BA). How to do this without root? I download OnePlus7ProOxygen_21.E.20_OTA_020_all_1909172050_2ce34409 and try install from options - system - system update - local update but it informs that an older version cannot be updated.
How to make clean installation?
What region are you based and using the device, the switch can be made with the full rom but it may require a wipe so please take a backup before you proceed.