[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install N3E92 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
Android File Host
Original Thread: Forum Turkdevs
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_N3E92" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
XDA:DevDB Information
[N3E92] Nougat Fastboot Stock, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Google
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
is there any way to decrypt /data with twrp? after a factory reset it always gets encrypted, and in twrp it asks for a password which i didn't set.
mjz2cool said:
is there any way to decrypt /data with twrp? after a factory reset it always gets encrypted, and in twrp it asks for a password which i didn't set.
Click to expand...
Click to collapse
Install custom kernel, visit turkdevs.com.
this tool won't work, it can't run cmdcolor.exe, with error 0xc000007b
mjz2cool said:
this tool won't work, it can't run cmdcolor.exe, with error 0xc000007b
Click to expand...
Click to collapse
google is my friend, not yours ??
http://www.pcadvisor.co.uk/how-to/w...t-correctly-0xc000007b-error-message-3613164/
https://www.youtube.com/watch?v=lIvPZjzAi_w
7dwergen said:
google is my friend, not yours ??
http://www.pcadvisor.co.uk/how-to/w...t-correctly-0xc000007b-error-message-3613164/
https://www.youtube.com/watch?v=lIvPZjzAi_w
Click to expand...
Click to collapse
true, and already solved it
After flashing it, is it really like stock?
Is it possible to get OTAs after flashing?
Sorry, but i normally only use the Nexus/Pixel Phones, there it is no problem to flash a factory image.
Leonerdo said:
After flashing it, is it really like stock?
Is it possible to get OTAs after flashing?
Sorry, but i normally only use the Nexus/Pixel Phones, there it is no problem to flash a factory image.
Click to expand...
Click to collapse
it's not like stock, it is stock. so you'll get ota updates
asderdd said:
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install N3E92 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
Android File Host
Original Thread: Forum Turkdevs
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_N3E92" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
XDA:DevDB Information
[N3E92] Nougat Fastboot Stock, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Google
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
Click to expand...
Click to collapse
hi! please need help after trying to flashed several fastboot stock rom i still can not get my gm5 + running, i'm still facing a bootloop! what should i do if you I have already tried with the stock rom aroma with twrp but still the same problem.With Cyanogen 13 I have baseband unknown and no imei!
asderdd said:
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install N3E92 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
Android File Host
Original Thread: Forum Turkdevs
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_N3E92" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
XDA:DevDB Information
[N3E92] Nougat Fastboot Stock, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Google
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28
Click to expand...
Click to collapse
[7.0][N3E92] GM 5 Plus Fastboot Stock ROM [Android One 3rd Gen] October Patch
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
:laugh::laugh::laugh::laugh::laugh:
"without my permission. :""""
omg:laugh::laugh::laugh::laugh::laugh:
Please I'm getting and error "cmd color-bad image" mv102.DLL missing. Is there any way I can flash this rom with normal fastboot codes?
Does this still work? I have installed it and phone is stucked on general mobole screen
Related
Ported Global ROM for Redmi Note 3 (MTK)
(miui_HMNote3Global_6.9.29)
P.S.: This is my own project of MIUI Global ROM for Redmi Note 3 MTK! This is a official ROM without any modifications!
Features:
*All Global languages and features of MIUI 8 Global (No Chinese patched ROM)
*Same version of MIUI 8 Global for Redmi Note 3 (Snapdragon) with all features (Still on Android 5.0.2)
*Odexed ROM
*This is a real Global ROM since first boot for your Redmi Note 3 (MTK)! =)
*Support for Goodix Fingerprint sensor
*No OTA. All updates are provided here.
INSTALL VIA SP-Flash-Tool (Locked Bootloader)
Open folder SP-FLASH-TOOL-V.5.1532.00
Run flash_tool.exe as administrator
Select download agent (DA_SWSEC.bin)
Select scatter in "images"
UNCHECK PRELOADER
BE SURE that only is checked this three files: "system" "userdata" "boot" (Don't check "userdata" if you are upgrading from previous ported Beta ROM. Check "userdata" ONLY IF YOU WANT TO DO A CLEAN INSTALL! DO A FULL BACKUP OF YOUR INTERNAL STORAGE BEFORE IT!!!)
Press download
Turn off mobile phone
Press vol- and conect to your pc with original cable
When red bar apear, wait 5 secs and unpress vol- (see yellow bar in 9-12 secs)
Wait to 100% (yellow bar)
Disconect mobile phone of your pc
Reboot, wait a moment and voila!
INSTALL VIA TWRP (Unlocked Bootloader)
HOW TO UNLOCK YOUR BOOTLOADER
http://en.miui.com/thread-202290-1-1.html
HOW TO INSTALL TWRP
http://en.miui.com/thread-225375-1-1.html
HOW TO INSTALL (TWRP)
First Install
After unlock your bootloader and flash TWRP, like another custom ROM, copy Full ROM to Internal Storage, boot on TWRP, wipe System, Data and Caches, flash ROM, reboot, wait a moment and voila!
Upgrade from previous ported Beta ROM
Copy Full ROM to Internal Storage, boot on TWRP, flash Full ROM without any wipes, reboot, wait a moment and voila!
IMPORTANT: ON FIRST INSTALL, TO GET GLOBAL LOCALES ON SP-FLASH-TOOL VERSION, YOU NEED TO FLASH USERDATA AND THIS WILL WIPE YOUR INTERNAL STORAGE! DO A FULL BACKUP BEFORE INSTALL!
FOR FIRST TIME ON ROM, CLEAN INSTALL IS HIGHLY RECOMMENDED!
After install and use it, please, share your experience here! =D
DOWNLOAD
SP-Flash-Tool Version: https://www.androidfilehost.com/?fid=457095661767098749
TWRP Version: https://www.androidfilehost.com/?fid=529152257862664731
SCREENSHOTS:
DOWNLOAD OF OLDERS RELEASES
6.4.28 SP-Flash-Tool Version: https://www.androidfilehost.com/?fid=24539867161559189
6.4.28 TWRP Version: https://www.androidfilehost.com/?fid=24539867161559185
6.7.5 SP-Flash-Tool Version: https://www.androidfilehost.com/?fid=24588232905721272
6.7.5 TWRP Version: https://www.androidfilehost.com/?fid=24588212152305147
Please update your rom with latest developer rom
Good work. Thanks
Stable, fast and good battery life. Thanks.
M4rs08 said:
Please update your rom with latest developer rom
Click to expand...
Click to collapse
Latest Global Dev ROM is 6.4.28 my friend!
Next Global Dev Release coming in next week as you can see here >>> http://en.miui.com/thread-283273-1-1.html
thanks bro
Sent from my Redmi Note 3 using Tapatalk
OP updated with 6.5.12 Global Dev Release
andersonaragao said:
OP updated with 6.5.12 Global Dev Release
Click to expand...
Click to collapse
Thanks bro, best rom for my RN3
gonna give this rom i try, ill come back with some feed back
between, just seen we got a separate forum for our beloveds redmi note 3, about time... but better late than never
Some devices with 6.5.12 Global Dev ROM has a issue that don't pass from MI account. To bypass it, flash 6.4.28 (download on second post), setup it, then upgrade to 6.5.12 or wait for next Global Dev Release.
is there any way to update to new version without overwriting everything with locked bootloader? im still new to xiaomi flashing
my thoughts so far:
1) first run takes forever to show something other than loading screen, don't panic
2) indeed, you can't login to xiaomi account with 6.5.12 - you will get error loop cycle. repeat very-quick-tap on the "retry" button and you will skip this thing. you cannot login to xiaomi later anyway. im gonna try 6.4.28 while i'm waiting for bootloader unlocking approval :|
[QRCODE][/QRCODE]
andersonaragao said:
Some devices with 6.5.12 Global Dev ROM has a issue that don't pass from MI account. To bypass it, flash 6.4.28 (download on second post), setup it, then upgrade to 6.5.12 or wait for next Global Dev Release.
Click to expand...
Click to collapse
Hi, your Global ROM is a life savior! by the way, how do I upgrade to 6.5.12 from 6.4.28? I did it through the SP Flash method? Thanks in advance.
Thank you... have been trying since 20th Dec 2015. Finally found your solution (which worked).
I didn't realise that Qualcomm was Snapdragon and that I had a MediaTek.
My Redmi Note 3, which came with a hacked English version of software v7.00.99 on release day straight from China and therefore could not update OTA or via other means.
Just to clarify part of the instructions above (this worked with my phone):
Turn phone off, do not connect usb cable to phone.
Press the power button and down volume button together (do not release until end).
After the phone boots to fastrecover, connect the usb cable to phone (do not release both buttons, this can be difficult with one pair of hands).
Continue to hold both buttons until Red bar turns 100% Yellow.
Release both buttons, disconnect usb cable.
Now reboot phone.
Now I can enjoy my Christmas present.
Thank you so much.
Root?
How to root this rom??Thanks before
jockyvmc said:
How to root this rom??Thanks before
Click to expand...
Click to collapse
This worked for me:
h**p://en.miui.com/thread-225204-1-1.html
Updated to MIUI 8 6.7.5 Global guys! Enjoy!
Nice, been waiting for your global rom
It must be rooted or not?
Gerrywiradinata said:
It must be rooted or not?
Click to expand...
Click to collapse
not
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the well known Build of Jiayu Germany Lollipop Release Candidate 5 (latest) for Jiayu S3 (Advance/Basic) with MTK 6752 SoC
There's also a modified version , for the new Jiayu s3 Pro ( with 32GB of internal memory ) also MTK6752
This is being posted here, as this is a full SPFlashTools "Base" ROM, usually used to recover your device
( or if you want to roll back to Lollipop ...)
The "REPACK" Version is simply the same RC5 Rom, but with latest M.A.D. TWRP already included
There's also a modified version for the s3 Pro (32GB)
The Rom should be flashed in "UPGRADE MODE" on SPFlashTools. (Doesn't matter in what ROM / OS you currently are ...)
DO NOT flash any SP Flash Tools Jiayu s3 (old 16gb) roms on the new Jiayu s3Pro (32GB)
--> Preloader, partitions are different, you'll get an hard brick.
Installation Instructions:
BACKUP EVERYTHING, This will ERASE everything from your internal phone memory (pics, videos, data, etc )
Turn OFF the phone
Open MediaTek SPFlashTools
Load mt6752 Scatter
Choose "Upgrade Mode"
Press "Download"
At this moment, plug USB Cable to phone, it'll start flash ...
Some Jiayu S3, require BOTH Volume Keys to be pressed , while you plug USB Cable to enter in "download Mode"
If you wish to upgrade to latest M.A.D. Android Nougat, after you flashed RC5, it's recommended that you let the RC5 boot up, then you can go back to recovery ( Latest M.A.D. Recovery included already)
Place AOSP Nougat Rom on internal memory/ external SDCard
WIPE ALL
Flash AOSP and GAPPS & SuperSu (latest two optional)
Download ROMs from "XDA DevDB Download Section"
Choose the right rom, for your Jiayu S3 variant (s3 advance / basic 16GB) or ( s3 pro 32GB )
Working:
Everything
The Rom Changelogs, and old discussion can be found on this thread :
https://forum.xda-developers.com/jiayu-s3/development/rom-jiayu-s3-5-1-1-t3217241
GPL Compliance:
https://github.com/MediatekAndroidDevelopers
XDA:DevDB Information
[ROM] [REPACK] [ 5.1.1 ] RC5 Lollipop Jiayu S3 & S3 Pro [MT6752], ROM for the JiaYu S3
Contributors
superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: SP Flash Tools
Based On: MediaTek AOSP
Version Information
Status: Stable
Created 2017-01-25
Last Updated 2017-01-25
Reserved
,,,,,,,,,,,,,,
Please include boot from AICP 10 (with fixed wi-fi hotspot).
superdragonpt said:
ROMs will take a while to be uploaded ...
slow speed...
Click to expand...
Click to collapse
thanks man.....
waiting for the s3 pro version....
My net provider is having issues, I currently have no home connection, hopefully they'll fix this today, for me to upload
Bb
ROMs being uploaded
superdragonpt said:
ROMs being uploaded
Click to expand...
Click to collapse
thank you so much...
hope flashing rc5 and then stable 7 fix my low signal connection on s3 pro
All done ...
Can you also upload the SPFT flash tool so that people would use a similar version and reduce variables and become easier to debug when a problem arises?
I'm sorry for the stupid question but are de download links?
Have searched in the download section but keeps sending me back to this post!
Enviado do meu Redmi Note 3 através de Tapatalk
Found it, sorry for double post!
Enviado do meu Redmi Note 3 através de Tapatalk
Upgrade successfull!
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.
AgiZ10 said:
Thank you. This has helped me gretly with my quest to upgrade 4.4 -> 5.x -> 7.x.
I had a problem with uploading through SP Flash Tool that it wouldn't start to download to phone, but after many tries i finally changed USB port, and then it worked like a charm.
I have a question though. Should i stay on this ROM or upgrade to 6.0.1 or what? The problem is that Xposed framework does not work yet with 7.x, so untill it does, i will stay on system that does support it.
Click to expand...
Click to collapse
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...
superdragonpt said:
Then go with AICP11 MM its the best MM rom for the phone with xposed (mm) available ...
Click to expand...
Click to collapse
Thanks, done.
Will continue replying there if something comes bugs me
A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.
StoneTheKiwis said:
A huge thank you for the s3pro version. I have just bought a second S3 32gb without knowing that it was different to my old S3 32gb, and bricked it trying to install the old rc5 that is on my old phone. This version rescued the phone from death!!
Can I use TWRP to install SuperSU and root it? I'm guessing there's zero chance of flashing 7.1.1 on the s3pro.
Click to expand...
Click to collapse
I've just found that the recovery is the chinese one, not twrp. Reflashing just recovery does not change this. The build number is 20160302-190806. Any ideas on what might have happened here?
I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers
superdragonpt said:
I made this thread mainly for the newer s3 33GB variant...
Since I also got the 32gb variant, after my old s3 died
You just need to follow instructions on the first post
Download full rc5 repack for the 32GB variant
And flash in "upgrade mode"
You,ll get the newer MAD twrp, that is also Nougat compatible.
After flash, just boot to recovery , full wipes (including data, and flash newer Nougat release)
Cheers
Click to expand...
Click to collapse
Thanks for your reply. I've just done it all again - downloaded the PRO pkg afresh and flashed as 'upgrade', but again booting to recovery shows a chinese menu. I also flashed in 'format all' mode, but the same result. I'm downloading the pkg from the 'downloads' section of this forum, and it unpacks to show recovery as 'S3_h560_TWRP_3.0.2-0' at 13,074kb. The recovery from the old rc5 pkg is a different size - I suppose that can't be used without rewriting the scatter file? Or does the scatter file reference the recovery that's recommended for your latest 7.1.1 rom? I could just get that separately and copy it in.
Apart from blaming the pixies, I really don't understand what is going wrong here.
Stranger and stranger. I replaced the recovery with the one hosted on mediafire for 7.1.1 (though that has a space in the filename which had to be removed for the scatter txt to recognise it) and after flashing the phone was bricked. Then replaced recovery with the one from rc5 and again it was bricked. Then unpacked afresh the pro pkg and flashed with that in 'format all' mode - this time it booted to chinese recovery but refused to boot normally. Then reflashed in 'upgrade' mode and now it boots normally but refuses to boot to recovery. Perhaps the hardware has been changed even further, or perhaps the gods are just laughing at me, but I've run out of options now. The problem is that supersu won't install without updating itself (though it's 2.79) and it fails to update under the 'normal' update option and doesn't have a twrp recovery to update through. Hence the phone can't be rooted.
Sorry for this question, please how can I revert to this ROM I'm already on 7,1.2, what does repack means or how should I repack it ,any possible way to use spflashtool for this ROM, your answer is highly needed urgently please to whom ever knew
ATTENTION
if you flash this on aqua you will have an aqua without fingerprint reader and without sdcard
DOWNLOAD
(newest: aosp-caf-n-mr2-20170505-2337-libra.zip)
HOW TO FIND BOOTLOADER VERSION
You get Nougat bootloader if you update to MIUI Nougat or flash the Nougat firmware zip @AndropaX made.
After you update to Nougat bootloader you need to request unlock permission from Xiaomi.
(if you can't remember doing any of this then you have Lollipop bootloader)
INSTALL
0. If you are on Lollipop bootloader, flash latest lollipop firmware. (you don't need to do this step each time you flash the ROM, only once).
1. Reboot to TWRP.
2. Wipe cache, dalvik cache, data and system.
3. Install ROM.
4. Install 7.1.x Gapps for ARM64.
5. If you are on Nougat bootloader, install nougat-bootloader-compatible kernel in the boot partition.
6. Reboot.
Root is not included! You need to flash Magisk or Systemless SuperSU.
FEATURES
hardware buttons customization
system ui tuner
You can request features in the comments! We'll be adding the ones we consider useful.
BUGS
edge tap (won't fix)
the included camera is a bit problematic, I suggest using Google Camera 3.2
XDA:DevDB Information
AOSP, ROM for the Xiaomi Mi 4C
Contributors
Cozzmy13, mosimchah
Source Code: https://github.com/DemonTeam
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop bootloader
Based On: AOSP
Version Information
Status: Alpha
Created 2017-04-30
Last Updated 2017-05-05
Reserved
Reserved
Screenshots
My hero! If I'm on nougat bootloader how do I downgrade to lollipop? Flash the zip mentioned in the op?
solis_f said:
My hero! If I'm on nougat bootloader how do I downgrade to lollipop? Flash the zip mentioned in the op?
Click to expand...
Click to collapse
Updated first post with nougat-bootloader-compatible kernel.
Finally, google play edition mi4c. Thanks for your work bro, really great work
Really exciting to see! and love that you're making it aqua compatible too thanks bud, might have to give this one a try. Let me know if you need anything from the aqua platform!
On the request front - same thing every aqua user will ask for the same thing SD support and if at all possible fpr - understandable if not possible but got to be worth asking!
Thanks again for all you do for the community you guys are superstars!
Thank you!!! Using this rom + SuperSU + a.r.i.s.e sound mode and everything is working perfect (for now).
Only feature missing for me is the advanced reboot menu ! Otherwise a great job, even camera seems good
solis_f said:
Only feature missing for me is the advanced reboot menu ! Otherwise a great job, even camera seems good
Click to expand...
Click to collapse
Will be added next release (hopefully that's tomorrow).
does magisk / supersu included?
Hi guys, what the gapps we needed? 7.1 on ARM64 platform right?
faighter said:
Hi guys, what the gapps we needed? 7.1 on ARM64 platform right?
Click to expand...
Click to collapse
yes,right
Im nougat with unlocked bootloader
I followed all the steps and no.5 in the twrp asked me where to install the image
1 system
2 boot
3 Recovery
Which option to choose?
Thank you
Install kernel before gapps or after?
How about performamce and smoothness of this rom compared to AICP?
hhanu said:
Im nougat with unlocked bootloader
I followed all the steps and no.5 in the twrp asked me where to install the image
1 system
2 boot
3 Recovery
Which option to choose?
Thank you
Install kernel before gapps or after?
Click to expand...
Click to collapse
Before, and boot
IcyGlacial said:
does magisk / supersu included?
Click to expand...
Click to collapse
No, that's why flashing Magisk is an extra step in the first post.
HUGE thanks.
Gonna be my daily driver.
Is it working fine until now, guys?
Welcome to S4 Unified Guides!This thread now redirects to here.
⬇
Welcome to S4 Unified Collection!
FIRMWARES
Quick Tutorial:
Download the Firmware for your variant, run Odin as administrator, put the file with Firmware to AP section, Flash! Wait for the device to boot to system and Done!
Note: For Stock Rom to have your WiFi working you need to have the same version of Modem/BL as your Firmware. For example if you have QK1 Stock ROM then you need to have QK1 Modem/Bootloader. On Custom ROMs doesn't matter. You can have any Modem/BL of your variant you want but recommend is always the latest.
You can find the latest Firmware for your variant below:
GT-I9295 (jactivelte): I9295XXSDQD6 / Build Date: 2017-04-20 / OS: Lollipop 5.0.1
GT-I9500 (ja3gxx): I9500XXUHQD1 / Build Date: 2017-04-25 / OS: Lollipop 5.0.1
GT-I9505 (jfltexx): I9505XXUHQK1 / Build Date: 2017-11-09 / OS: Lollipop 5.0.1
GT-I9505G (jgedlte): I9505GUEUDPF1 / Build Date: 2016-05-13 / OS: Lollipop 5.1.1
GT-I9506 (ks01lte): I9506XXUDRB1 / Build Date: 2018-02-15 / OS: Lollipop 5.0.1
GT-I9515 (jfvelte): I9515XXS1BQD2 / Build Date: 2017-04-17 / OS: Lollipop 5.0.1
GT-I9515L (jfvelte): I9515LUBU1BQF1 / Build Date: 2017-06-08 / OS: Lollipop 5.0.1
SCH-I545 (jfltevzw): VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK
SCH-I545L (jfltelra): I545LWWSGQA1 / Build Date: 2017-01-05 / OS: Lollipop 5.0.1
SCH-R970 (jflteusc): R970TYSGPL1 / Build Date: 2016-12-02 / OS: Lollipop 5.0.1
SCH-R970C (jfltecri): R970CVRUFND1 / Build Date: 2014-04-11 / OS: KitKat 4.4.2
SCH-R970X (jfltecsp): R970XWWSGQA1 / Build Date: 2017-01-05 / OS: Lollipop 5.0.1
SGH-I337 (jflteatt): AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL
SGH-I337M (jftlecan): I337MVLSGQB1 / Build Date: 2017-02-09 / OS: Lollipop 5.0.1
SGH-M919 (jfltemo): M919UVSFQA1 / Build Date: 2017-01-04 / OS: KitKat 4.4.4
SM-S975L (TracFone-StraightTalk): S975LUDUANB1 / Build Date: 2014-02-04 / OS: Jelly Bean 4.3
SPH-L720 (jfltespr): L720VPSGPL1 / Build Date: 2016-12-20 / OS: Lollipop 5.0.1
MODEMS & BOOTLOADERS
Quick Tutorial:
You can flash Bootloader & Modem with two methods:
First and Recommended Method COMBINED: Download the COMBINED BOOTLOADER _MODEM.tar, run Odin as administrator, put the COMBINED BOOTLOADER_MODEM.tar to AP section, untick Auto-Reboot, flash! When It's done, reboot your device by pressing Power Button for couple of seconds.
Second Method SEPERATE: Download the Seperate BOOTLOADER and MODEM .tars, run Odin as administrator, put the BOOTLOADER to BL section and MODEM to CP section, untick Auto-Reboot, flash! When It's done, reboot your device by pressing Power Button for couple of seconds.
Check what version of Modem and Bootloader you have with apps like Inware, Device Info HW or Phone Info.
If Modem & Bootloader didn't changed to the version you wanted, do the same steps again with the method you have selected.
If for some reason Odin failed to flash, make sure your run Odin as adminstrator, try to change USB Port in your PC and don't move the cable during flash. Also if you have Odin and the files on an External hard drive, move Odin and all the files you want to flash, into one folder to your Main Drive for example C: drive.
Note: For Stock Rom to have your WiFi working you need to have the same version of Modem/BL as your Firmware. For example if you have QK1 Stock ROM then you need to have QK1 Modem/Bootloader. On Custom ROMs doesn't matter. You can have any Modem/BL of your variant you want but recommend is always the latest.
You can find the latest Bootloader & Modem for your variant below:
GT-I9295 (jactivelte): I9295XXSDQD6 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9500 (ja3gxx): I9500DXUHPB1 MODEM
GT-I9505 (jfltexx): I9505XXUHQK1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9505G (jgedlte): I9505GUEUDPF1 MODEM
GT-I9506 (ks01lte): I9506XXUDRB1_I9506XXUDRA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9515 (jfvelte): I9515XXU1BQD2 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
GT-I9515L (jfvelte): I9515LUBU1BQF1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SCH-I545 (jfltevzw): VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK
SCH-I545L (jfltelra): I545LWWSGQA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SCH-R970 (jflteusc): R970TYSGPL1 COMBINED BOOTLOADER & MODEM / BOOTLAODER - MODEM
SCH-R970C (jfltecri): R970CVRUFND1 COMBINED BOOTLAODER & MODEM / BOOTLOADER - MODEM
SCH-R970X (jfltecsp): R970XWWSGQA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SGH-I337 (jflteatt): AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL
SGH-I337M (jftlecan): I337MVLSGQB1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SGH-M919 (jfltemo): M919UVSFQA1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SM-S975L (TracFone-StraightTalk): S975LUDUANB1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
SPH-L720 (jfltespr): L720VPSGPL1 COMBINED BOOTLOADER & MODEM / BOOTLOADER - MODEM
TWRP Recovery 🛠
Quick Tutorial:
Installation Process:
Without any custom recovery installed on your device: Download the .tar file of the TWRP to your PC.
Reboot to Download Mode (power button+vol.down+home button), run Odin as adminstrator, connect your device to PC, put the .tar file of TWRP in AP section, untick Auto-Reboot in options and flash.
Done! Restart to TWRP Recovery. (power button+vol.up+home button)
With TWRP already installed to your device (UPDATE to latest version): Download the .img file of the TWRP version you have selected.
Reboot to TWRP (power button+vol.up+home button) and press Install--->Install Image--->Navigate to .img file you downloaded before---->Flash.
Done!
The list below contains the variants which can use the latest Unified Official TWRP Recovery or JDCTeam TWRP Recovery:
GT-I9505 (jfltexx)
GT-I9505G (jgedlte)
GT-I9507 (jtfddxx)
GT-I9508 (jfltezm)
SCH-I545 (jfltevzw)
SCH-I545L (jfltelra)
SCH-R970 - jflteusc
SCH-R970C (jfltecri)
SCH-R970X (jfltecsp)
SGH-I337M (jftlecan)
SGH-M919 (jfltemo)
SM-S975L (TracFone-StraightTalk)
SPH-L720 (jfltespr)
The list below contains the variants which need a specific TWRP Recovery version:
GT-I9295 (jactivelte): Official TWRP Recovery
GT-I9500 (ja3gxx): Official TWRP Recovery
GT-I9506 (ks01lte): Official TWRP Recovery
GT-I9515 (jfvelte): Official TWRP Recovery
GT-I9515L (jfvelte): Official TWRP Recovery
SGH-I337 (jflteatt): TWRP Recovery Locki Patched by mattgyver
GAPPS
Quick Tutorial:
You should always use Pico or Nano GApps, be sure you have selected Platform: ARM and the proper Android version of the ROM you are going to flash. If the ROM you want to flash include GApps, no need to download and flash any GApps at all.
Open GApps
BiTGApps
NikGApps
MAGISK ROOT SOLUTION
Quick Tutorial:
The easiest way to root your device is via Magisk, it should work in all ROMs, Stock and Customs.
However if you are gonna use ROM based on LineageOS and don't want to use any Magisk Module, recommended is to use the LineageOS AddonSU.
From LineageOS 17.1 onwards, LineageOS is dropping its own superuser implementation, making Magisk the de facto solution! You can find infos here.
Steps to Root via Magisk:
1. Download the latest Magisk version.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded.
3. Done. Magisk Manager App should be installed, if not install it manually.
Steps to Unroot Magisk:
1. Download the latest Unistaller Magisk version.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded.
3. Done. Magisk Manager App should be also unistalled.
Steps to Root via LineageOS SU Addon if you use LineageOS ROM.
1. Download the LineageOS AddonSU and select arm and the proper android version of the rom you have.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded. Next, Reboot to System.
3. Go to Settings--->About Phone--->Tap 7 times in Build Number to Enable Developer Options. Then go Settings--->System--->Developer Options--->Enable Root from there--->Done!
Steps to Unroot via LineageOS AddonSU Unistaller.
1. Download the LineageOS AddonSU Unistaller and select arm and the proper android version of the rom you have.
2. Reboot to TWRP Recovery (power button+vol.up+home button) and flash the .zip you have downloaded. Next, Reboot to System.
3. Go Settings--->System--->Developer Options--->Disable Root from there--->Done!
PIT FILES
Quick Tutorial:
If you messed the partitions of your device, you can fix it by simply flashing the PIT FILE for your variant via Odin in the PIT TAB.
The list below contains PIT FILES for some variants:
GT-I9500 (ja3gxx) PIT FILE
GT-I9505 (jftlexx) PIT FILE
SAMSUNG USB DRIVER
Quick Tutorial:
If you have a problem while you connect the device to your PC and PC can't recognize it, you may miss the Samsung USB DRIVER. To fix follow these steps:
1. Download SAMSUNG USB DRIVER.
2. Unzip it and install it to your PC.
3. Connect your device and done! Now should be ok.
ODIN
You can download ODIN HERE. Recommened version is Odin 3.12.3
USEFUL APPS
If for some reason you can't find/install an app on Google Play Store due country restrictions or anything, you can sideload the app from APKMirror.
Adaway: Open Source ad blocker for Android using the hosts file.
Aegis Authenticator: Aegis Authenticator is a free, secure and open source app for Android to manage your 2-step verification tokens for your online services.
Brave Browser: Open Source Privacy Browser with built-in adblock.
Bromite: Bromite is a open source Chromium fork with ad blocking and enhanced privacy.
FairEmail: Fully featured, open source, privacy oriented email app.
Franco Kernel Manager: Complete toolbox for all devices with a rich feature set aimed for ease of use to supercharge your kernel.
Inware: Inware allows you to know your device in detail. You can find information about your device's hardware and software, in a new modern UI.
KeepassDX: KeePassDX is a free open source password manager for Android, which helps you to manage your passwords in a secure way.
MiXplorer: Fully-featured File Manager.
Naptime: Lowers your device's power consumption while the display is off by empowering Android's built-in doze power saving functionality.
NewPipe: Open Source Youtube alternative platform without ads.
Shade Launcher: Make your phone feel like home. Free, open source, no ads.
Signal: Signal is a free and open source software application for Android, iOS and Desktop that employs end-to-end encryption , allowing users to send end-to-end encrypted group, text, picture, and audio & video messages, and have encrypted phone conversations between Signal users.
Simple Mobile Tools: A group of simple, open source Android apps without ads and unnecessary permissions, with customizable widgets.
SysLog: Open Source tool for quickly taking and sharing system logs.
Today Weather: Today Weather is a beautiful & simple-to-use weather app that provides the world's most accurate local weather forecasts.
Youtube Vanced: Vanced is a well known modded version of YouTube with many features such as adblocking, background playback and many many more.
RECOMMENDED ROMS
Recommend ROMs for the variants below, are any of JDCTeam ROMs with tags [Live] [Stable] [Daily Driver] or Official LineageOS 17.1
GT-I9505 (jfltexx)
GT-I9505G (jgedlte)
GT-I9507 (jtfddxx)
GT-I9508 (jfltezm)
GT-I9515 (jfvelte)
GT-I9515L (jfvelte)
SCH-I545 (jfltevzw) VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK
SCH-I545L (jfltelra)
SCH-R970 - jflteusc
SCH-R970C (jfltecri)
SCH-R970X (jfltecsp)
SGH-I337 (jflteatt) AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL
SGH-I337M (jftlecan)
SGH-M919 (jfltemo)
SM-S975L (TracFone-StraightTalk)
SPH-L720 (jfltespr)
Recommened ROMs for the variants below are:
GT-I9295 (jactivelte): Official LineageOS 17.1
GT-I9500 (ja3gxx): -
GT-I9506 (ks01lte): Unofficial LineageOS 17.1, Unofficial crDroid or Official HAVOC OS
JDCTeam Universe
Here you can find the work of JDCTeam over the years for our S4 device!
SUPPORT THE DEVELOPERS WHO KEEPING S4 ALIVE
Side -> Support Buff99 -> Support
reserved
Great job, my friend! :good:
sjamie said:
Great job, my friend! :good:
Click to expand...
Click to collapse
Thanks a lot bro! :highfive:
Retrial said:
reserved
Click to expand...
Click to collapse
You should mention that downloading and installing of g-apps is not necessary in most cases. F-Droid is a really good alternative market. And if you still need apps not available on f-droid you may use yalp or aurora...
And if you depend on some google services microG may be a good solution for you, especially in the flavour of NanoDroid.
guest4711 said:
You should mention that downloading and installing of g-apps is not necessary in most cases. F-Droid is a really good alternative market. And if you still need apps not available on f-droid you may use yalp or aurora...
And if you depend on some google services microG may be a good solution for you, especially in the flavour of NanoDroid.
Click to expand...
Click to collapse
Hi,
For an average user, GApps is recommended so the device can be fully functional with access to the main Google Play market and to avoid "issues". For example, push notifications to work in Pie need Google Services etc.
I agree, F-Droid is a good alternative market but some apps may missing from there. About microG and NanoDroid I am not a fun.
However, I want to mention the alternatives options but unfortunately I have hit the maximum words I can contain to OP. I am thinking to split OP to two posts but I am not sure yet, I will see how I will do it.
Btw at reserved posts, will be included Battery Save tips and more.
Thanks for your suggestions.
In your lists of variants (bootloader etc.), I don't see SM-S975L. Has this variant been dropped?
LaughingDog9 said:
In your lists of variants (bootloader etc.), I don't see SM-S975L. Has this variant been dropped?
Click to expand...
Click to collapse
Sry if I miss it, there are so many variants...
Thanks for mention it, I will take a look and I will add it soon.
Retrial said:
Sry if I miss it, there are so many variants...
Thanks for mention it, I will take a look and I will add it soon.
Click to expand...
Click to collapse
No worries! I can see it's a big task to keep track of everything!
Thanks for all of your efforts, and the help those efforts bring to us all.
Sorry. In my school they only taught Russian, but there are translators. Stupid to ask but have to. I have s4 9505 variable modem and bootloder from I9505XXUHOJ2 to XXUHQK1. Now I don't have LTE only EDGE. I know for you builders to laugh and for me a riddle so I am asking builders for a tip that I would come back to LTE.
Wi-fi enabled is ok, just outside edge
kurkawodna said:
Glupio pytac ale trzeba. Mam s4 9505 zmienilem modem i bootloder z I9505XXUHOJ2 na XXUHQK1 Teraz nie mam LTE tylko E. Wiem dla Was budowniczych to smiech a dla mnie zagadka wiec prosze budowniczych o wskazowke zebym wrocil na lte
Click to expand...
Click to collapse
Welcome to XDA and this forum. Here on XDA we use the English language. But a lot (most?) of us aren't native English speakers. And automated translations sometimes aren't clear and correct. So it is good practice to try to translate your text to English and doublecheck the translation yourself. And to add your original text for native speakers, too, if in doubt...
kurkawodna said:
Sorry. In my school they only taught Russian, but there are translators. Stupid to ask but have to. I have s4 9505 variable modem and bootloder from I9505XXUHOJ2 to XXUHQK1. Now I don't have LTE only EDGE. I know for you builders to laugh and for me a riddle so I am asking builders for a tip that I would come back to LTE.
Wi-fi enabled is ok, just outside edge
Click to expand...
Click to collapse
Make sure you have the same Firmware version as your Modem & Bootloader version. If you have flashed QK1 Modem and Bootloader then you need to flash QK1 Firmware.
Retrial said:
Make sure you have the same Firmware version as your Modem & Bootloader version. If you have flashed QK1 Modem and Bootloader then you need to flash QK1 Firmware.
Click to expand...
Click to collapse
As I mentioned, English is a translator. QK1 Firmware need to be installed after changing the modem and bootloder? This is for Croatia and Austria. Is Polish in your settings? Clean and upload v12.1? I guess the questions are at child level but I am asking for help anyway. After all upload v12.1?
kurkawodna said:
As I mentioned, English is a translator. QK1 Firmware need to be installed after changing the modem and bootloder? This is for Croatia and Austria. Is Polish in your settings? Clean and upload v12.1? I guess the questions are at child level but I am asking for help anyway.
Click to expand...
Click to collapse
Doesn't matter if you flash Firmware after or before. Your Modem and Bootloader will stay as it is, unless you flash again different Modem & Bootloader.
Country doesn't matter, you will find your language in settings.
What do you mean "clean and upload v12.1"?
Don't worry, ask anything you want. I will try to help.
Retrial said:
Doesn't matter if you flash Firmware after or before. Your Modem and Bootloader will stay as it is, unless you flash again different Modem & Bootloader.
Country doesn't matter, you will find your language in settings.
What do you mean "clean and upload v12.1"?
Don't worry, ask anything you want. I will try to help.
Click to expand...
Click to collapse
Let it not be, without petroleum jelly, nice that a professional wants to help and not to instruct. S4 small, grateful phone, not the pingpong rackets. I started with cyanegen through other mods and worked out after changing the boot. I understand that after this change you need to upload the official I9505XXUHQK1 and then flash on v12.1? I just downloaded I9505XXUHQK1 T-Mobile.
kurkawodna said:
Let it not be, without petroleum jelly, nice that a professional wants to help and not to instruct. S4 small, grateful phone, not the pingpong rackets. I started with cyanegen through other mods and worked out after changing the boot. I understand that after this change you need to upload the official I9505XXUHQK1 and then flash on v12.1? I just downloaded I9505XXUHQK1 T-Mobile.
Click to expand...
Click to collapse
I don't really understand what you wanna do.
You can find everything in my guides and collection in OP and post #2.
What is v12.1 you are talking about? Optimized LineageOS v12.1? You wanna flash that ROM or you want to flash Stock ROM?
What ROM do you use right now and what you wanna do?
Retrial said:
I don't really understand what you wanna do.
You can find everything in my guides and collection in OP and post #2.
What is v12.1 you are talking about? Optimized LineageOS v12.1? You wanna flash that ROM or you want to flash Stock ROM?
What ROM do you use right now and what you wanna do?
Click to expand...
Click to collapse
I was on LineageOS16.0 on XXUHOJ2 versions up to 11 I had no problem with LTE. With version 12 there was a suggestion to change the boot and modem to XXUHQK1. I did it and I don't have LTE but only EDGE. I ask what I did wrong because obviously the fault was on my side? I want to have this soft but with LTE.
kurkawodna said:
Let it not be, without petroleum jelly, nice that a professional wants to help and not to instruct. S4 small, grateful phone, not the pingpong rackets. I started with cyanegen through other mods and worked out after changing the boot. I understand that after this change you need to upload the official I9505XXUHQK1 and then flash on v12.1? I just downloaded I9505XXUHQK1 T-Mobile.
Click to expand...
Click to collapse
Do you mean S4 mini when you speak about small S4? This device isn't i9505 aka jfltexx.
Perhaps you should look at https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-lineageos-16-0-s4-mini-t3833063 or it parent forum.
guest4711 said:
Do you mean S4 mini when you speak about small S4? This device isn't i9505 aka jfltexx.
Perhaps you should look at https://forum.xda-developers.com/galaxy-s4-mini/orig-development/rom-lineageos-16-0-s4-mini-t3833063 or it parent forum.
Click to expand...
Click to collapse
No. S4 i9505 LTE. Writing small I meant the difference in the size of current phones.
Hey There Were No Posts Regarding Latest Bootloaders, Firmwares, Twrp, Etc... For C7 And C7 Pro.
So I Thought Of Making This Thread Which Will Be Useful For My Other Rom Threads
OK , So Here Are The Shortcut Links To The Specific Post Directly -
#1 Latest Official Full Firmware -
#2 Latest Official Bootloader -
#3 Root Guide -
#4 Latest TWRP Recovery -
#5 OEM Unlock Guide -
#6 Soft/Hard Brick Recovery -
Basics-
-Our Samsung Android Devices Have Three Modes, Namely -
2 System
1 Recovery Mode
3 Download Mode
1) System-
It Is The Normal Workaround That Every Device Normally Boot To Which We Also Call As TouchWiz, One UI, Etc...
You Normally Have To Just Power On Your Device And It Directly Boots To System And The System Is Normal Under Control Of The Vebdor (ie: Samsung, One Plus,etc..) Who Deny Full System Access There By Restricting The User From Modifying All Thats There In The Root Directory, So Here Is What We Mean By Rooting Your Device -
And Custom Rom Means Nothing But Replacing Your Stock System With A modified Or With A Custom System ....
2)Root -
There Is A Thing Called Root Folder Which Is The Very First Directory In Your Device And Usually These Directories Cannot Be Accessed Directly Because Of OEM Control Over The Device And What We Mean By Rooting Is Nothing But
The Process Of Handing Over The Control Of Device From Oem To A Root Manager (A App That Monitors Root Activity) Is Called Rooting..
3) Bootloader (AKA Download Mode In Android) -
It Is The Program That Manages The Booting Process (Before Kernel) And Also Service As A Recovery Point In Most Cases. Where You Will Use Tools To Communicate With It And Use The Bootloader As Medium To Intsall Other Firmware Including Root & Custom Recoveries. So For Installing Latest Firmware Files Latest Bootloader Is Needed ...
Official Bootloaders Are Usually Preferred, Which Has To Be Unlocked Via Developer Options (OEM Unlock)
4) Recovery -
This Is The Place Where We'll Be Hangin Out Most Of The Time For Installing Roms, Kernel, etc...
Basically Your Device Comes With A Stock Recovery Which Can Do Nothing But Just Format Data,Clear Cache & Redirect b/t System And Bootloader.... But Thats Not What We Need, So What We Do Is Install A Custom Version Of Recovery Which Can Be Replaced With Stock Recovery And Do What Ever Stuff We Want To ..
Why Go For Custom Recovery ?
Just Imagine A State Where Your System & All The System Security Have No Control (Or It Is Switched Off), That Is What A Custom Recovery Takes Advantage Of.....
OK, So In That Case The Custom Recovery Can Access The Root Directories And Can Make Modification To System Without The Systems Knowledge Or With The System Along Side,
These Days The Oem System Have Hardened Custom Recovery Detection And Stuff Like That, So We Need A Recovery & Also A system That Supports Custom Mods With It .... Inorder To Do That We Make Use Of Custom Recoveries To Delete The Existing System and Replace It With A Similar/Modified System Which We Call It As A Custom Rom, Which Allows Modification To Any Part Of The Device Without Interruption ... This Is What An Super User Basically Does When He/She Unlocks Bootloader And Makes Modification To System
The Most Common Recovery Is TWRP Recovery
5) Hard/Soft Brick -
Is A State Where You Cant Boot To System (Usually Soft Brick) & Face Bootloops Etc... This State Is Usually Recoverable By Flashing The Original Firmware Again..
When You Have Messed Something With The Kernel/Recovery (Recovery In Most Cases) ,Your Phone Wont Boot, Turn On, Literally Anything ...(Hard Bricked) In This Case You Have Only On Option That Is To Boot To Download Mod (It Wont Boot Via 3 Button Combo) But Still There Are Ways To even Recover From This State Like Using Usb Jibb Or By Plugging Into The Device Into The PC With The Flash Tool Running .... etc
6) Kernel -
A Kernel Is A Platform Below System And Hardware, It What Controls The Clock Speed, Cores, Etc And Other Hardware/Software Related Things In A Device, These Often Determine The Performance Of A Device & There Fore ppl Tend To Move To A Custom Kernel For Flexibility ....
Will Add More Basic Tips
Official Fimware C7 / C7 Pro
Official Firmware -
C7 Pro -
C701f -
Link To The Latest Oreo [8.0] Firmware For C701f - C701F 8.0 FIRMWARE
C7010 -
Link To The Latest Oreo [8.0] Firmware For C7010 - C7010 TGY 8.0 FIRMWARE
C7018 -
Link To The Latest Oreo [8.0] Firmware For C7018 - C7018 CHC 8.0 FIRMWARE
Click to expand...
Click to collapse
C7 -
C7000 -
Link To The Latest Oreo [8.0] Firmware For C7000 - C7000 tgy 8.0 FIRMWARE
Click to expand...
Click to collapse
Instruction For Installing The Stock Firmware-
•Download the The Correct Firmware For your Device From The Above Links
•Download The Latest Odin (v3.13)
•Extract The Firmware Using The Extraction Tool (7zip,winter,etc)
•Install The Proper Drivers For Your Device - Samsung Drivers
•Run Odin In Your Windows and click on "bl" and locate the bl***********.md5 ( "**" Reprsents Some Similar File In The Firmware Zip) file in the file browser
Similarly Locate "ap","csc" In The Same Way , (do not click on "home csc")
•Go To Odin Mode Or Download Mode In Your C7/C7 pro By Pressing Vol Down + Power + Home Key for 30 sec.
•Then Connect Your Phone To The PC & Click On Start In Odin Once You See A "added" Text .
•Click On Start When Everything Is Ready .... And If Everything Goes Well You'll See A Green Pass Icon In Odin & And Your Device Will Boot To System Within (7-15) Min .
Click to expand...
Click to collapse
root ----WILL ADD, GIMME SOME TIME---
Ill make a guide if possible... rn ill just provide the links for twrp -
TWRP (C7)
TWRP (C7 Pro)
Custom ROMS For C7 & C7 Pro -
C7 Pro -
1) Eulah Rom
Supported Devices - C701F/C7010/C7018
Current Version - v2
One UI Based Rom
Maximum Feature Packed
Fully Customizable Via Installer
With Latest One UI
Several Mods & Ports
The Best Rom So Far
Thread Link - Eulah Rom
2) Sudo Rom
Supported Devices - C701F/C7010/C7018 | C7000
Current Version - v1
Samsung Experience Based Rom
Super Lite Package with Lite & Smooth Environment
Hyper Performance (Best Rom For Gaming)
Multi Variant & Csc Support
The So Far Latest Rom
Thread Link To - Sudo Rom
3) Sudo Lite Rom
Supported Devices - C701F/C7010/C7018
Current Version - v1
Samsung Experience Based Rom
C9 Pro Port With Minimal & Easy Installation Process
Lightest Package with Lite & Smooth Environment
Super Fast Booting Speed
Thread Link To - Sudo Rom Lite
4) Jesvi Stock Oreo Rom
Supported Devices - C701F
Current Version - v1
Samsung Experience Based Rom
No Edits No Nothing, Just Pure Stock With Needed Patches
Base Rom & Can Be Used For Development
Thread Link To - Jesvi Stock Oreo Rom
5) Lite Rom
Supported Devices - C701F
Current Version - v6
Dream UX Based Rom
Lite Rom
Comes With Nougat Mods
Smooth Environment
Thread Link To - Lite Rom Nougat
6) Lineage OS 14.1
Supported Devices - C701F
Current Version - v1
AOSP Based Rom
You Get All The Benefit Of Lineage OS Nougat
Light Package
Alpha State
Thread Link To - Lineage Os 14.1
Click to expand...
Click to collapse
C7 -
1) Sudo Rom
Supported Devices - C701F/C7010/C7018 | C7000
Current Version - v1
Samsung Experience Based Rom
Super Lite Package with Lite & Smooth Environment
Hyper Performance (Best Rom For Gaming)
Multi Variant & Csc Support
The Latest Rom
Thread Link To - Sudo Rom
Click to expand...
Click to collapse
Latest Bootloader -
C7 Pro -
C701f -
Link To The Latest Oreo [8.0] Bootloader For C701f - C701F Latest Bootloader
C7010 -
Link To The Latest Oreo [8.0] Bootloader For C7010 - C7010 Latest Bootloader
C7018 -
Link To The Latest Oreo [8.0] Bootloader For C7018 - C7018 8.0 Bootloader
Click to expand...
Click to collapse
C7 -
C7000 -
Link To The Latest Oreo [8.0] Bootloader For C7000 - C7000 Latest Bootloader
Click to expand...
Click to collapse
Instruction For Flashing The Latest Bootloader-
•Download the The Correct Bootloader File For your Device From The Above Links
•Download The Latest Odin (v3.13)
•Extract The Firmware Using The Extraction Tool (7zip,winter,etc)
•Install The Proper Drivers For Your Device - Samsung Drivers
•Run Odin In Your Windows and click on "bl" and locate the bl***********.md5 ( "**" Reprsents Some Similar File In The Firmware Zip) file in the file browser. Similarly click on " " and locate the " **********.md5".
•Go To Odin Mode Or Download Mode In Your C7/C7 pro By Pressing Vol Down + Power + Home Key for 30 sec.
•Then Connect Your Phone To The PC & Click On Start In Odin Once You See A "added" Text .
•Click On Start When Everything Is Ready .... And If Everything Goes Well You'll See A Green Pass Icon In Odin & And Your Device Will Boot To System Within (7-15) Min .
Click to expand...
Click to collapse
Oem Unlock (Not Visible bug) ----WILL ADD, GIMME SOME TIME, im feling sleepy right now---
jesvi said:
Oem Unlock (Not Visible bug) ----WILL ADD, GIMME SOME TIME, im feling sleepy right now---
Click to expand...
Click to collapse
did you wake up?
agritux said:
did you wake up?
Click to expand...
Click to collapse
Hahaha, *slept to death..
sry man , give me aome time
jesvi said:
Twrp 3.2.3 ----will add, gimme some time---
Click to expand...
Click to collapse
How much time do you need?
mrdeepmind said:
How much time do you need?
Click to expand...
Click to collapse
Check out the for some threads in c7 or c7 pro section in xda till i fully complete this thread..:good:
EDIT : I have added the links for twrp.
jesvi said:
Ill make a guide if possible... rn ill just provide the links for twrp -
TWRP (C7)
TWRP (C7 Pro)
Click to expand...
Click to collapse
I cant flash any ROM with any TWRP, i downloaded from all possible places (ROMs and TWRPs), it just crashes when i try, and restarts. I am not able to find official TWRP for my Samsung C7 Pro (C701F), But there are ROMs available and some youtube guy also installed it, dont know how.
Deval99 said:
I cant flash any ROM with any TWRP, i downloaded from all possible places (ROMs and TWRPs), it just crashes when i try, and restarts. I am not able to find official TWRP for my Samsung C7 Pro (C701F), But there are ROMs available and some youtube guy also installed it, dont know how.
Click to expand...
Click to collapse
Hello, this twrp works fine with the latest firmware and roms in the forum...
Make sure u have completely erased your data,system,cache & do a 'format data' in twrp before installing any rom or anything... coz this removes the system encryption...
And make sure the rom file is good and not corrupt...
jesvi said:
Hello, this twrp works fine with the latest firmware and roms in the forum...
Make sure u have completely erased your data,system,cache & do a 'format data' in twrp before installing any rom or anything... coz this removes the system encryption...
And make sure the rom file is good and not corrupt...
Click to expand...
Click to collapse
Yup i ensured all of these (even md5 checksum of file downloaded), But not working. I will follow the steps you given and try to install.