the title would sum it up guys!. its a falcon! i have twrp installed, but even when i go to recovery it reboot before i can do anything! help please guys! when i go into fastboot mode (i think its called fastboot, idk i am a noob, by pressing power and volume down key) , all options are visible and its stable, i.e it does not reboot! however if i go to recovery, it starts rebooting! usb debugging is disabled! idk what to do! is there any way i can enable usb debugging via fastboot? help please!
got exactly the same problem. it would be a great help if someone could assist us @AndyCr15
Saadjamil36 said:
got exactly the same problem. it would be a great help if someone could assist us @AndyCr15
Click to expand...
Click to collapse
In case of a bootloop, I suggest you download a new rom and install it via twrp's file manager, using a pendrive/otg pendrive. Else,your can flash the stock motorola firmware using fastboot. that method always works in case of softbrick.
Tried to reflash twrp?
Debanka said:
In case of a bootloop, I suggest you download a new rom and install it via twrp's file manager, using a pendrive/otg pendrive. Else,your can flash the stock motorola firmware using fastboot. that method always works in case of softbrick.
Click to expand...
Click to collapse
Hey, thank you the problem was solved but then I installed CyanogenMod 13.0 on my moto g. After a day of use the phone automatically stopped working and i restarted it. Didnt display screen after CyanogenMod animation. I booted into TWRP recovery, was backing up data into a usb otg when the backup failed and the phone rebooted itself. Now it doesnt even display the CyanogenMod startup animation. I tried to enter twrp recovery again. It shows the main blue screen with twrp written on it but doesnt proceed further instead it restarts. I tried flashing twrp recovery again but the same problem persists. please help me out
Try flashing stock ROM, then again TWRP and CM13 via TWRP. I suggest this version of TWRP (NOTHEME version!).
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
Hello everyone
I own the Motorola Moto G ( 1st gen) xt1033 model. I had cm 13(latest release) flashed on it and my custom recovery is TWRP 2.8.4.0 and it was working fine until today after using it for around 2 months.
So what happened today is that while running an application, my Moto G shut down randomly( I don't know the reason for that),and it got stuck in bootloop ( Everytime I start it, the cm logo will appear and then it sometimes even shows my lock screen but instantly becomes black after that and most of the time its stuck only on the cm logo). After this I thought of restoring it back to the original firmware using this link: http://forum.xda-developers.com/showthread.php?t=2700502
I can get into fastboot mode but can't access the ADB as USB debugging mode was not enabled ( that's the main problem )
So following the procedures of that post, everything worked well on the log of the fastboot (no errors) but after that when I reboot my phone, again the cm logo appears (Even when I flashed it to stock 5.0.2 Lollipop!) and I can even get to my old lock screen sometimes and then instantly it goes black. Even if I try flashing a custom image like stock or some other ROM , it gives no effect as again the cm logo would appear.
I think this has to do with the fact that USB debugging mode was not enabled on it.
Also, I can't enter my recovery. When I use the standard procedure to get into fastboot (power button + volume (-) ) and select recovery, the TWRP splash screen comes then the screen turns black and normal reboot takes place( stuck on the cm head). I tried flashing different recoveries using fastboot (also tried mfastboot) like CWM and even TWRP again but still that bugged TWRP recovery remains.
I can't get to recovery neither can I boot up my phone. I can flash recovery or image files(It shows no errors flashing things, but no effect takes place :/ )
Can someone please help me in finding the solution for this problem? Thanks in advance
Just clear the data, cache and dalvik cache. Phone should boot
Hi, I'm new to XDA. Sorry if I did something wrong already. But I have a problem, I tried installing a new boot animation to my moto e 1st gen (bootloader was unlocked, it was rooted too). Now whenever I turn the phone on, The WARNING BOOTLOADER UNLOCKED image shows up, but there is no boot animation. I cannot access anything, I can only go into recovery mode and CWM. I have tried factory reset using Recovery Mode (No success, just does WARNING boot loop again ) I have also tried factory reseting through CWM, till no success. I am giving up, I just recently bought this phone. NAY help would be appreciated. Thanks in advance!
rakibshahid said:
Hi, I'm new to XDA. Sorry if I did something wrong already. But I have a problem, I tried installing a new boot animation to my moto e 1st gen (bootloader was unlocked, it was rooted too). Now whenever I turn the phone on, The WARNING BOOTLOADER UNLOCKED image shows up, but there is no boot animation. I cannot access anything, I can only go into recovery mode and CWM. I have tried factory reset using Recovery Mode (No success, just does WARNING boot loop again ) I have also tried factory reseting through CWM, till no success. I am giving up, I just recently bought this phone. NAY help would be appreciated. Thanks in advance!
Click to expand...
Click to collapse
Hello,
Can you tell us what firmware was your phone running? Also what recovery do you have on your phone?
If stock, you may try flashing stock firmware via fastboot.
-Vatsal
Vatsal said:
Hello,
Can you tell us what firmware was your phone running? Also what recovery do you have on your phone?
If stock, you may try flashing stock firmware via fastboot.
-Vatsal
Click to expand...
Click to collapse
Thanks for responding so quickly! But I fixed the problem a few minutes after posting this . But there is a new problem, I downgraded from Android 5.0.2 to Android 4.4.2. After doing this the phone worked perfectly. Then a few minutes later it installed a system update for 4.4.4 and now the phone is hard bricked. I can't access recovery mode, CWM, or even turn the phone on now. Before charging the phone, if I held the power button for a long time, the LED lit up and turned back off. Now there is no response from the phone at all no matter what I do.
Also, I had ClockWorkMod and stock recovery on my phone (Is stock recovery the one that shows up when you hold power+volume down? If so I had both CWM and stock) But now I can't access either recovery modes. If it at least went into stock recovery, I'd flash stock firmware, root it, install CWM, and flash a Lollipop zip. (I like Lollipop, I don't know why there are so many people that hate Lollipop )
Any help would be much appreciated. All i need now is a way to flash files without going into recovery mode on phone.
Hello, i have a moto g5s plus and i tried to root my devices using TWRP and magisk..
but after loading TWRP recovery magisk was not loading and kept returning an error..
then in order for it to work i accidentally wiped my system files, but managed to write different OEM versions like Sanders, Potters etc.. still showed some issue like no OS found, cycle rebooting in bootloader, fastboot to bootloader as UTAG bootmode configured as fastboot,
also tried different oneslike lineage, resurection, beanstock etc..
Untill This point atleast the phone used to boot either to bootloader or TWRP recovery.
then i gave my phone to a friend that uses one plus 3, he tried to boot the phone using some of his tools and tricks and finally NOW!!! the phone does not boot at all...
whenever you connect the phone to the computer is just keeps blinking..
I have tried to get the blank flash solution but it did not work for my device..
please help!!!