Hello everyone
I own the Motorola Moto G ( 1st gen) xt1033 model. I had cm 13(latest release) flashed on it and my custom recovery is TWRP 2.8.4.0 and it was working fine until today after using it for around 2 months.
So what happened today is that while running an application, my Moto G shut down randomly( I don't know the reason for that),and it got stuck in bootloop ( Everytime I start it, the cm logo will appear and then it sometimes even shows my lock screen but instantly becomes black after that and most of the time its stuck only on the cm logo). After this I thought of restoring it back to the original firmware using this link: http://forum.xda-developers.com/showthread.php?t=2700502
I can get into fastboot mode but can't access the ADB as USB debugging mode was not enabled ( that's the main problem )
So following the procedures of that post, everything worked well on the log of the fastboot (no errors) but after that when I reboot my phone, again the cm logo appears (Even when I flashed it to stock 5.0.2 Lollipop!) and I can even get to my old lock screen sometimes and then instantly it goes black. Even if I try flashing a custom image like stock or some other ROM , it gives no effect as again the cm logo would appear.
I think this has to do with the fact that USB debugging mode was not enabled on it.
Also, I can't enter my recovery. When I use the standard procedure to get into fastboot (power button + volume (-) ) and select recovery, the TWRP splash screen comes then the screen turns black and normal reboot takes place( stuck on the cm head). I tried flashing different recoveries using fastboot (also tried mfastboot) like CWM and even TWRP again but still that bugged TWRP recovery remains.
I can't get to recovery neither can I boot up my phone. I can flash recovery or image files(It shows no errors flashing things, but no effect takes place :/ )
Can someone please help me in finding the solution for this problem? Thanks in advance
Just clear the data, cache and dalvik cache. Phone should boot
Related
Hi all,
I have successfully rooted and installed CM12 on my Motorola Moto G 4G. I was unable to get into recovery so I download ROM manager to boot into recovery and thats how I installed CM12.
CM12 is stuck in a boot loop so I want to install CM11 or go back to Stock but I cannot get into recovery now. If I boot up with power and vol down I am taken to a fastboot screen which has an option to goto recovery (second option down) but this simply boots back into the device.
I was using CMW but I installed TWRP and now this simply takes me to a blank screen (or it could be powered off).
Can anybody advise how I can boot into recovery? (I am still able to use fastboot commands).
Thanks!
Just find a working recovery image and flash it (TWRP 2.7.1 works for me), also make sure you are using the right controls in the fastboot menu, they're tricky
Use fastboot to reflash recovery. After a successful flash, use the button combo on the fastboot screen to boot into recovery.
Guys, I just gained root access to my phone 5 days ago, yesterday I installed custom recovery (TWRP - openrecovery-twrp-2.8.5.0-xt1032). I think my device is XT1033. After that i tried to install xposed framework by installing it through the recovery and then my phone started to boot loop at the bootloader warning. My phone can access the fastboot menu. From there when i try to access recovery it just shows the logo of TeamWin followed by a black screen and then directs me to the bootloader warning message as usual and keeps looping. Also when I hit the factory reset button it tends to boot loop at the boot loader warning message.
The attachment shows the window it loops.
Please help me. Is my phone over?
Hey dont worryy. Just use philz recovery 6.55.0. That is best as twrp donot support xt1033.
Then in that just clear cache and dalvik cache. And try to reboot. If it does its good. If not then just flash any other rom using otg (usb ) if u dont want to lose any data.
Edit- to flash recovery. Press the power key for like 10 sec until the phone reboot. And black screen comes up. Then quickly press power and volume down key for 3-4 sec to go itno fastboot mode. Then flash the philz recovery ( search for it in original android development or google it) and flash it.
Hi
i had rooted and installed CM 13 on my moto g 2013 version. Since GPS was not working, i tried some step mentioned in some forum and ended up entering some BP tools option via fastboot.
Since then my mobile is on bootloop flashing the CM logo infinitely .
What i tried
1) Tried to go into recovery(i have teamwin recovery, the teamwin screen shows, then again CM logo and boot loop)
2) Tried factory reset etc form the fastboot menu
Whats working
2) able to connect to PC and then fastboot menu recognises usb connected.
please help me get back to having a working phone.:crying::crying:
mavis339 said:
Hi
i had rooted and installed CM 13 on my moto g 2013 version. Since GPS was not working, i tried some step mentioned in some forum and ended up entering some BP tools option via fastboot.
Since then my mobile is on bootloop flashing the CM logo infinitely .
What i tried
1) Tried to go into recovery(i have teamwin recovery, the teamwin screen shows, then again CM logo and boot loop)
2) Tried factory reset etc form the fastboot menu
Whats working
2) able to connect to PC and then fastboot menu recognises usb connected.
please help me get back to having a working phone.:crying::crying:
Click to expand...
Click to collapse
I had the same issue after I flashed the optimized 4.4.4 ROM for my XT1032. It kept showing me the moto logo and resetting. So i tried to push the stock, used TWRP and did a wipe of the unit first. after i rebooted it worked.
DevilCr3w said:
I had the same issue after I flashed the optimized 4.4.4 ROM for my XT1032. It kept showing me the moto logo and resetting. So i tried to push the stock, used TWRP and did a wipe of the unit first. after i rebooted it worked.
Click to expand...
Click to collapse
Hey thanks for sharing,
Can you help me do the same? I have android sdk installed in my laptop, can i push stock/factory reset by using the USB?
I dont remeber the commands i used from command prompt to flash, install CM.
Mavis.
Try this: http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522
try the factory images.
Ok, let me explain the situation, i'll try to cover up everything i've done, So, please read my whole post first.
The situation of the device is it able to go through bootloader and recovery, it load the animation and logo, but after it the screen is blank (i can see the "android is upgrading", strange it just only 2 apps then nothing)
no sign of life in the blank state, i've tried to press the power up quite times, no sound. Blank state = slightly bright black.
First, i tried to "factory" within the bootloader. it failed, result is blank screen.
Second, i tried the wipe data/factory reset in the recovery, it throws errors.
Third, i tried to flash TWRP. The procedure is finished successfully (complete), but when i tried to boot to the recovery it enter the stock recovery.
Fourth, i tried [5.0.2][Restore to Stock][XT1033] Asia Retail [Dual Sim][4.4.2/4.4.2][LockBootloader] method, i tried the manual one to make sure everything is done supposedly. The only thing that failed is when i tried the last step, mfastboot.exe oem lock. Still then I reboot the phone, blank screen.
Fifth, i tried [HOW TO] Unbrick Moto G 2013! [Falcon, Peregrine] [Lollipop guide], but i'm stuck at step 7 where my phone only detected as "Android Android USB Device"
Another info that might needed is my bootloader is unlocked.
i've also tried the latest KK rom and L rom, and tried flashing under win7 and win10. Both result in blank screen.
Any idea before i jump intio a dead emmc conclusion?
Not sure it'll help, but maybe try updating to the latest adb/fastboot. Mfastboot isn't really necessary anymore, latest fastboot should be ok for heavy loads
just boot into recovery using following cmd
fastboot boot (ur recovery name)
without brackets it will boot ur device in recovery then wipe and install the custom ROMs.
So, I just decided to try and Flash the old TF101 with Katkiss 6.0.1 and Gapps, but I always get stuck on the same problem.
My TF101 is running Android 4.0.3 ICS and USB Debugging is on
I downloaded TWRP app on the transformer, as well as the latest .blob flash file through the app.
Before this, I rooted the tablet using Kingroot.apk, which worked. When I went to flash the tablet with the recovery, the app noted "Recovery Partition not found".
I tried to boot into recovery mode on my own, (Pressing Pwr + Volume down , Then hitting Volume Up), The android screen popped, up and then flashed to a fallen android with a red triangle.... The screen stays on this for a minute and then boots into the normal system. I can't even boot into recovery through ADB, using the
Code:
adb reboot recovery
, The tablet will just reboot normally, not into recovery mode.
The Device does recognize through ADB....
Is my recovery partition just non existent? Even when I just let the system though without pressing volume up, it only gives me the option of (Android) or (Erase Data). when I click erase data, ill stay on the asus loading screen indefinitely and nothing will happen until i turn it off and on.
I just cant seem to boot into TWRP for some reason, and that means I just cant install the downloaded custom ROM.
How Can I fix this and boot into TWRP? I've tried for hours and have been hung up due to the same problem each time, even after rooting.
Did you already solve that problem? I also need a solution.Thanks