Guys, I just gained root access to my phone 5 days ago, yesterday I installed custom recovery (TWRP - openrecovery-twrp-2.8.5.0-xt1032). I think my device is XT1033. After that i tried to install xposed framework by installing it through the recovery and then my phone started to boot loop at the bootloader warning. My phone can access the fastboot menu. From there when i try to access recovery it just shows the logo of TeamWin followed by a black screen and then directs me to the bootloader warning message as usual and keeps looping. Also when I hit the factory reset button it tends to boot loop at the boot loader warning message.
The attachment shows the window it loops.
Please help me. Is my phone over?
Hey dont worryy. Just use philz recovery 6.55.0. That is best as twrp donot support xt1033.
Then in that just clear cache and dalvik cache. And try to reboot. If it does its good. If not then just flash any other rom using otg (usb ) if u dont want to lose any data.
Edit- to flash recovery. Press the power key for like 10 sec until the phone reboot. And black screen comes up. Then quickly press power and volume down key for 3-4 sec to go itno fastboot mode. Then flash the philz recovery ( search for it in original android development or google it) and flash it.
Related
my defy is stuck in a boot loop. actually i installed CM7 but accedently i used new version of 2ndinit. after that i was not able to boot the room. so i try to flash the new sbf but still i am stuck in boot loop.
no i am trying to enter the stock recovery which i do but on the recovery screen no option is visible and i can clear cache and/or factory reset.
plzzz help... thanks
While the small Android appears, hit at the same time Volume + and - . Then you will be able to see options.
Hi Guys, I'm in a bit of a panic with my Nexus.
Looked in my pocked yesterday and the phone was randomly in a boot loop, just getting up to the google logo, then rebooting.. this was weird as the phone was working throughout the day. The day before I had installed Faux v5 (and I have cataclysms rom)..
Followed the instructions from [TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
to rever to stock image.
I run the flash-all.bat (using method 1 from Post1), which seems to complete successfully (writes to the device and it reboots a few times), but after this the phone gets stuck at the Google logo,
I cant get to the final two steps (which is wipe data/factory data reset), because in the step before where I select recovery, it just boots back to the google logo - no recovery. It will stay there all day, unless I hold power & volume down, then I can get back to the bootloader.
Since this failed (I have flashed the flash-all batch twice using different usb ports... but no joy.
If I run the fastboot device info, - it correctly shows my bootloader is unlocked...
I have tried to relock it, but hit the same problem, (if I run the fastboot boot c:\twrp.img etc) - it just wont boot into a recovery..
I am at a loss.. any help would be greatly appreciated...
I have also tried flashing a custom recovery (twrp & cwm), and I have the same problem with both.. they flash, but then I can get to the bootloader, but cant launch a recovery.. just gets stuck in a bootloop...
THANKS!
reboot bootloader (power + vol down)
go into recovery (the red triangle)
open up the recovery menu (power + vol up)
wipe cache
The problem I am having is I cant get into recovery.
I get into fastboot mode, I then hit volume up twice (to change from start > to recovery >).
I then hit power. But instead of a red! I get the Google Logo.. and I am back where I started.
Volume up & power does nothing, all I can do is Vol down & power, then I am back at the bootloader.. no recovery..
Hi all,
I have successfully rooted and installed CM12 on my Motorola Moto G 4G. I was unable to get into recovery so I download ROM manager to boot into recovery and thats how I installed CM12.
CM12 is stuck in a boot loop so I want to install CM11 or go back to Stock but I cannot get into recovery now. If I boot up with power and vol down I am taken to a fastboot screen which has an option to goto recovery (second option down) but this simply boots back into the device.
I was using CMW but I installed TWRP and now this simply takes me to a blank screen (or it could be powered off).
Can anybody advise how I can boot into recovery? (I am still able to use fastboot commands).
Thanks!
Just find a working recovery image and flash it (TWRP 2.7.1 works for me), also make sure you are using the right controls in the fastboot menu, they're tricky
Use fastboot to reflash recovery. After a successful flash, use the button combo on the fastboot screen to boot into recovery.
XDA,
I am trying to root the stock rom (Cyanogen OS 12.10YOG4PAS1N0). I have thus far managed to unlock the bootloader and am now trying to install a custom recovery - here I run into some problems:
So I downloaded the latest TWRP and renamed it recovery.img - pressed 'fastboot erase recovery' and then 'fastboot flash recovery recovery.img' -all going fine.
I then unhook the phone, turn it off - press volume down and the power button to boot straight into recovery (not even booting OS) and here's where it gets interesting:
The 1+ logo appears, as if its trying to boot recovery - it hangs for 10s, then the screen goes black and it vibrates. The 1+ logo appears again and it boots straight into OS.
If I keep pressing volume down I am in a loop like this, with 1+ logo, screen black and so on.
So I never actually get into the custom recovery. And if I boot into the OS and press restart into recovery: I get stock recovery.
I've tried CWM. TWRP, Philz, the toolkit, manually - lots of things. I turned off overwrite custom recovery in the developer options - all to no avail.
I hope someone recognizes this problem and can help me out.
Thanks a million,
Michiel.
Not sure if this is your issue, but go to this thread on how to unlock bootloader, install custom recovery and root. See the note in underline at the bottom of item #2, installing the custom recovery. I was unable to get TWRP to stick until I followed this simple method.
Yes, I tried this but when I power the phone down and boot it with the powerbutton and volume button - it hangs on the OPO logo and reboots again into the OS.
Hello everyone
I own the Motorola Moto G ( 1st gen) xt1033 model. I had cm 13(latest release) flashed on it and my custom recovery is TWRP 2.8.4.0 and it was working fine until today after using it for around 2 months.
So what happened today is that while running an application, my Moto G shut down randomly( I don't know the reason for that),and it got stuck in bootloop ( Everytime I start it, the cm logo will appear and then it sometimes even shows my lock screen but instantly becomes black after that and most of the time its stuck only on the cm logo). After this I thought of restoring it back to the original firmware using this link: http://forum.xda-developers.com/showthread.php?t=2700502
I can get into fastboot mode but can't access the ADB as USB debugging mode was not enabled ( that's the main problem )
So following the procedures of that post, everything worked well on the log of the fastboot (no errors) but after that when I reboot my phone, again the cm logo appears (Even when I flashed it to stock 5.0.2 Lollipop!) and I can even get to my old lock screen sometimes and then instantly it goes black. Even if I try flashing a custom image like stock or some other ROM , it gives no effect as again the cm logo would appear.
I think this has to do with the fact that USB debugging mode was not enabled on it.
Also, I can't enter my recovery. When I use the standard procedure to get into fastboot (power button + volume (-) ) and select recovery, the TWRP splash screen comes then the screen turns black and normal reboot takes place( stuck on the cm head). I tried flashing different recoveries using fastboot (also tried mfastboot) like CWM and even TWRP again but still that bugged TWRP recovery remains.
I can't get to recovery neither can I boot up my phone. I can flash recovery or image files(It shows no errors flashing things, but no effect takes place :/ )
Can someone please help me in finding the solution for this problem? Thanks in advance
Just clear the data, cache and dalvik cache. Phone should boot