my defy is stuck in a boot loop. actually i installed CM7 but accedently i used new version of 2ndinit. after that i was not able to boot the room. so i try to flash the new sbf but still i am stuck in boot loop.
no i am trying to enter the stock recovery which i do but on the recovery screen no option is visible and i can clear cache and/or factory reset.
plzzz help... thanks
While the small Android appears, hit at the same time Volume + and - . Then you will be able to see options.
Related
hi all
i am trying to do a factory reset to my nexus S but i faced some problems, the phone cant be reset to factory settings. my phone is on 2.3.4 and is rooted
i had tried the following steps
1) going to Settings>Privacy>Reset phone
after i confirm to wipe everything, the phone rebooted and it will stuck at the "Google" logo (in words) with the fastboot unlock logo at the bottom. i took off the battery to shutdown the phone (anything i press at this moment does not get any response from the phone) and start it up again. once it is started (it get pass the google word logo if i do it this way) all my application and even my themes are still there
2) shutting down the phone. press volume up + power button. choose recovery
same thing happen as above. it cant get pass the google word logo and once i restart the phone by plugging out the batt, it went back to previous state without wiping anything
i search online guide and also youtube video and all of them shows that the recovery will bring you to a android with a exclamation mark (in the triangle) but i cant get to the screen. i had left my phone there for 30 minutes but it is still stuck at the google logo.
Please help
Reflash latest clockworkmod recovery, boot into recovery and wipe data + cache + dalvik.
polobunny said:
Reflash latest clockworkmod recovery, boot into recovery and wipe data + cache + dalvik.
Click to expand...
Click to collapse
thanks for the feedback. now i am trying to flash it but i faced "adb device not found" error
ok done
managed to flash it back to an older version and everything works now
thanks a lot for your help! cheers
Make sure to update it eventually because you could run into issues when flashing stuff if your recovery isn't up to date.
No problem!
Hi Guys, I'm in a bit of a panic with my Nexus.
Looked in my pocked yesterday and the phone was randomly in a boot loop, just getting up to the google logo, then rebooting.. this was weird as the phone was working throughout the day. The day before I had installed Faux v5 (and I have cataclysms rom)..
Followed the instructions from [TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
to rever to stock image.
I run the flash-all.bat (using method 1 from Post1), which seems to complete successfully (writes to the device and it reboots a few times), but after this the phone gets stuck at the Google logo,
I cant get to the final two steps (which is wipe data/factory data reset), because in the step before where I select recovery, it just boots back to the google logo - no recovery. It will stay there all day, unless I hold power & volume down, then I can get back to the bootloader.
Since this failed (I have flashed the flash-all batch twice using different usb ports... but no joy.
If I run the fastboot device info, - it correctly shows my bootloader is unlocked...
I have tried to relock it, but hit the same problem, (if I run the fastboot boot c:\twrp.img etc) - it just wont boot into a recovery..
I am at a loss.. any help would be greatly appreciated...
I have also tried flashing a custom recovery (twrp & cwm), and I have the same problem with both.. they flash, but then I can get to the bootloader, but cant launch a recovery.. just gets stuck in a bootloop...
THANKS!
reboot bootloader (power + vol down)
go into recovery (the red triangle)
open up the recovery menu (power + vol up)
wipe cache
The problem I am having is I cant get into recovery.
I get into fastboot mode, I then hit volume up twice (to change from start > to recovery >).
I then hit power. But instead of a red! I get the Google Logo.. and I am back where I started.
Volume up & power does nothing, all I can do is Vol down & power, then I am back at the bootloader.. no recovery..
Guys, I just gained root access to my phone 5 days ago, yesterday I installed custom recovery (TWRP - openrecovery-twrp-2.8.5.0-xt1032). I think my device is XT1033. After that i tried to install xposed framework by installing it through the recovery and then my phone started to boot loop at the bootloader warning. My phone can access the fastboot menu. From there when i try to access recovery it just shows the logo of TeamWin followed by a black screen and then directs me to the bootloader warning message as usual and keeps looping. Also when I hit the factory reset button it tends to boot loop at the boot loader warning message.
The attachment shows the window it loops.
Please help me. Is my phone over?
Hey dont worryy. Just use philz recovery 6.55.0. That is best as twrp donot support xt1033.
Then in that just clear cache and dalvik cache. And try to reboot. If it does its good. If not then just flash any other rom using otg (usb ) if u dont want to lose any data.
Edit- to flash recovery. Press the power key for like 10 sec until the phone reboot. And black screen comes up. Then quickly press power and volume down key for 3-4 sec to go itno fastboot mode. Then flash the philz recovery ( search for it in original android development or google it) and flash it.
I have an android one Karbonn Sparkle v which is stuck at boot screen after i installed a custom boot animation. I've tried to use recovery mode to reset data and cache but its says no command and then restarts after some time.Please help me. Is there any way to bypass this no command screen without booting??
same issue here
Press power button+volume down again or any volume button.
But the best way to solve this is to flash the last version of TWRP and the last official ROM.
Sometimes clearing the data won't work you need to flash a new firmware in the mobile.
Hello everyone
I own the Motorola Moto G ( 1st gen) xt1033 model. I had cm 13(latest release) flashed on it and my custom recovery is TWRP 2.8.4.0 and it was working fine until today after using it for around 2 months.
So what happened today is that while running an application, my Moto G shut down randomly( I don't know the reason for that),and it got stuck in bootloop ( Everytime I start it, the cm logo will appear and then it sometimes even shows my lock screen but instantly becomes black after that and most of the time its stuck only on the cm logo). After this I thought of restoring it back to the original firmware using this link: http://forum.xda-developers.com/showthread.php?t=2700502
I can get into fastboot mode but can't access the ADB as USB debugging mode was not enabled ( that's the main problem )
So following the procedures of that post, everything worked well on the log of the fastboot (no errors) but after that when I reboot my phone, again the cm logo appears (Even when I flashed it to stock 5.0.2 Lollipop!) and I can even get to my old lock screen sometimes and then instantly it goes black. Even if I try flashing a custom image like stock or some other ROM , it gives no effect as again the cm logo would appear.
I think this has to do with the fact that USB debugging mode was not enabled on it.
Also, I can't enter my recovery. When I use the standard procedure to get into fastboot (power button + volume (-) ) and select recovery, the TWRP splash screen comes then the screen turns black and normal reboot takes place( stuck on the cm head). I tried flashing different recoveries using fastboot (also tried mfastboot) like CWM and even TWRP again but still that bugged TWRP recovery remains.
I can't get to recovery neither can I boot up my phone. I can flash recovery or image files(It shows no errors flashing things, but no effect takes place :/ )
Can someone please help me in finding the solution for this problem? Thanks in advance
Just clear the data, cache and dalvik cache. Phone should boot