I am new to Andriod world. I was trying to down grade GT-N7000 from Android 4.1.2 to ICS 4.0.4. With my bad luck during the process while device in download mode and ODIN started the cable accidently got unplugged. Since then I am not able to get in to recovery mode and it keeps flashing "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I tried that but no luck as it asks for recovery code..serial and model number entries did not work. However, it can still get in download mode so I tried reflashing with ODIN and following is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRK_N7000XXLRK_N7000ORALP2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> factoryfs.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So that's where I am at this moment and hoping some of you experts can help me out to revive this phone. Please accept my advance thanks for taking the time to help.
Related
Hello so im stuck in TWRP recovery with no rom and no backup. If i try to flash a rom thru TWRP it FAILS.
Please help me how to restore my tablet to stock.
Its Galaxy Note 10.1 from VERIZON (SCH-i925)
Thank you
Btw it started with me trying to flash Cyanogen Mod (That is shared on this forum) And it failed, too bad i did a wipe before trying to install, i hoped everything is gonna go well..
BUMP Please help, really urgent im stuck in odin, i downloaded some software for sch-i925 and i chosen phone, not PDA in odin, and i even made it worse as im experiencing blinking screen and only mode is odin, if i try to reflash it by selecting PDA, it fails.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
exjuno said:
BUMP Please help, really urgent im stuck in odin, i downloaded some software for sch-i925 and i chosen phone, not PDA in odin, and i even made it worse as im experiencing blinking screen and only mode is odin, if i try to reflash it by selecting PDA, it fails.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Close the antivirus and the Kies through the task manager
And then?
exjuno said:
And then?
Click to expand...
Click to collapse
Then Odin flash again with stock rom for your device.
Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
lavgold said:
Sorry to say, i tried to root Samsung GT-I9300 with help of Odin and CF-Autoroot, but got similar Messages as glenf (http://forum.xda-developers.com/showthread.php?t=2202563) and got stuck - no way to reaktivate handy (stockrom) but could manage to activate downloadmode .
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
.....
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I used Odin 3.04 and CF-Auto-Root-m0-m0xx-gti9300.tar.md5 .
I rmoved battery to get into download mode again and tried to use Odin with a stockrom - the same effect.
I had a stockversion 4.3 MAX-I9300XXELLA-20130104192229 and thougt it would work to root - as in thread http://forum.xda-developers.com/showthread.php?t=1957273&page=63.
Anyone who can help me,Samsung is new to me, i did rooting and custom roms on HTC before, never had problems. I did not find a way out.
Regards Manfred
Click to expand...
Click to collapse
hi im having a similar problem with my s3 gt-19300.
its not rooted . suddenly it just went dead
and using samsung kies it failes after downloading the os.
using odin i get the following.:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMJ9_I9300VFGGMJ5_I9300BUUGMJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any help??
Hey guys,
exactly the same Problem here... Tried diffrent USB ports, Odin versions and cables...
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
The reason I was rooting mainly was being unable to copy files to my phone... wtf. If you have any other solution for that on hand, I couldn't care less about rooting, so shoot
Thanks in Advance
Sorry to hear you're having problems try using Odin 3.07 instead of 3.04 worked for me.
Sent from my D5803 using XDA Free mobile app
Hey guys,
I've got a Samsung Galaxy Tab Pro and now i have a huge problem. I rooted it a long time ago and decided to install TWRP today via TWRP Managaer from Play Store.
I guess i did something wrong. After the app told me that the installation of TWRP was successful, i restarted the tablet. Now the screen says: "downloading, do not turn of the device". And i warted for about 1 hour and nothing changed. I cant event shut down the tablet. If I hold the Power key, it only restarts. The only thing i can do is go to ODIN mode.
But i am kind a newbie and i have no clues what to do now. Any help is welcome. Thanks guys.
Hi, thank you for using XDA Assist. You probably have to flash the stock firmware with Odin and start the process all over. Try here for help first, http://forum.xda-developers.com/gal...-how-to-root-install-custom-recovery-t3087451. Also see your device's forum here, http://forum.xda-developers.com/galaxy-tab-pro-12-10-8. That is the best place to get help in the future.
Hey, thanks for your help. I just tried to flash the stock firmware via ODIN. But it always says that it Failed.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T520XXUANI1_T520DBTANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried on differend USB ports and installed differend Drivers. I've no idea what i should do now.
Hi, the only other things I can suggest is to:
Re-download the firmware file and check its md5
It's good you tired different usb ports. Make sure they're the ones in the back of the pc and 2.0, not 3.0
Try different cables
Keep trying. Odin can be finicky. I've has it fail many times and then for some unknown reason it'll work.
Thread closed.
Hi all,
I have Samsung Galaxy S6 G920F . I am trying to unroot my phone back to its factory settings. I downloaded the fimware and odin however i am getting below error message once i press the start in ODIN. I really dont have any idea what is going on. I tried different USB cables, frimware but didnt work out. Any help is highly appreciated . These are what i am getting ;
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar .md5 is valid.
is this version of firmware lower than the one curently instaled.
i had similar problem
it appears that is was on portugal firmware G920FXXS4DPG2_G920FOXX3DPD1_TPH (latest update of 109MB) and was trying to downgrade to G920FXXU3DPDP_G920FOXX3DPD1_TWO ,and was getting error ''cm sw rev check fail device 4 binary 3''
and smart switch failed because my it was trying TWO_CRO with lower verion.
I have this problem i cant reflash it on odin. Ive already rooted the device because when i get this it has a deep sleep issue so i fix it. After i rooted and install twrp recovery it works fine. But after i accidentally rooted again. It stuck up to boot loop t mobile logo.
Now when im flashin it on odin it say fails en recovery mode says.
SW REV. CHECK FAIL. DEVICE: 4 BINARY 3
Here is the log file i get from odin when im flashing a stock firmware on odin
GT-N920T T-mobile
Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU3DPG1_N920TTMB3DPG1_N920TUVU3DPG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Somebody help me please? For this fix