STUCK in TWRP and NO ROM - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hello so im stuck in TWRP recovery with no rom and no backup. If i try to flash a rom thru TWRP it FAILS.
Please help me how to restore my tablet to stock.
Its Galaxy Note 10.1 from VERIZON (SCH-i925)
Thank you
Btw it started with me trying to flash Cyanogen Mod (That is shared on this forum) And it failed, too bad i did a wipe before trying to install, i hoped everything is gonna go well..

BUMP Please help, really urgent im stuck in odin, i downloaded some software for sch-i925 and i chosen phone, not PDA in odin, and i even made it worse as im experiencing blinking screen and only mode is odin, if i try to reflash it by selecting PDA, it fails.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

exjuno said:
BUMP Please help, really urgent im stuck in odin, i downloaded some software for sch-i925 and i chosen phone, not PDA in odin, and i even made it worse as im experiencing blinking screen and only mode is odin, if i try to reflash it by selecting PDA, it fails.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Close the antivirus and the Kies through the task manager

And then?

exjuno said:
And then?
Click to expand...
Click to collapse
Then Odin flash again with stock rom for your device.

Related

[Completed] Samsung Boost S5

Please Help me...
I tried to root my Boost S5
I used Odin3 v1.85
I used the file
CF-Auto-Root-kltespr-kltespr-smg900p
This is the message
<ID:0/004> Added!!
<ID:1/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:1/003> Odin v.3 engine (ID:3)..
<ID:0/004> File analysis..
<ID:1/003> File analysis..
<ID:0/004> SetupConnection..
<ID:1/003> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 1)
Now when the phone boots it says
Recovery Booting......
Recovery is not seandroid enforcing
Set Warranty Bit : Recovery
But i can't do anything from here... I can't boot into Odin either... What can I do?
Skeptable said:
Please Help me...
I tried to root my Boost S5
I used Odin3 v1.85
I used the file
CF-Auto-Root-kltespr-kltespr-smg900p
This is the message
<ID:0/004> Added!!
<ID:1/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:1/003> Odin v.3 engine (ID:3)..
<ID:0/004> File analysis..
<ID:1/003> File analysis..
<ID:0/004> SetupConnection..
<ID:1/003> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 1)
Now when the phone boots it says
Recovery Booting......
Recovery is not seandroid enforcing
Set Warranty Bit : Recovery
But i can't do anything from here... I can't boot into Odin either... What can I do?
Click to expand...
Click to collapse
OK I can get into Odin recovery... I tried to reinstall The auto root ... it says it passed but it hasn't changed the recovery screen
Skeptable said:
OK I can get into Odin recovery... I tried to reinstall The auto root ... it says it passed but it hasn't changed the recovery screen
Click to expand...
Click to collapse
Fixed nevermind
Hi,
Thanks for using XDA Assist glad to hear that it fixed for you
Thanks and Thread Closed..

Can't get into recovery, ODIN fails at sboot.bin

I also can't flash stock
ODIN says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try using another micro USB cable. I had the same problem as yours. Changing to a different cable solved it.
you should share complete model name and rom which you are trying to flash will help me to guide you a lot

softbricked s6 edge

i tried flashing the latest DPBK bootloader via odin but it failed for some reason and now my s6 edge is softbricked. i tried flashing the latest 6.0.1 firmware from sammobile and it also failed. i cant flash anything via odin right now it just fails every try
can someone maybe help ?
got the bootloader and stuff from here:
http://forum.xda-developers.com/showpost.php?p=65588632&postcount=2578
here is the log
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU3DPB8_G925FVFG3DPB8_G925FXXU3DPB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

odin fail to flash my 920l.help me

i try to flash my g920l with the file"G920LKLU3COJ2_G920LLUC3COJ2_G920LKLU2COJ2_HOME.tar" but odin faild to flash
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
help me
// my phone still boot into normal but the wifi is hard to switch ON so i try to flash my phone

SM-G920F (Galaxy S6) Odin not working. -> FAIL

Hello guys,
today i want to flashing my SM-920F, but is not working. I have a "Fail".
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This is the Odin answer, can you help me ?
My new Firmware, i have downloaded : sammobile com/firmwares/download/54694/G920FXXU2COH2_G920FDBT2COH2_DBT/

Categories

Resources