Related
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them
Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!
Unfortunatly, you've managed to do the same as I have... leave the phone for e a few days and wait for a rom that you can install via clockwork recovery, you'll have your phone up and running again. Dont do as I did and wipe the recovery from the phone, it will result in a total brick (or at least a brick till LG releaase a full rom update (could be months yet...).
Oh man, I'm panicking so much that I might have ruined the phone now.....
read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389
madshaun1984 said:
read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389
Click to expand...
Click to collapse
I'm not sure what I'm looking for there, I've looked through that thread but it doesn't seem relevant to the problem I'm having.
I have the same problem, if you put it into emergency mode you can update to 10d but then its even worse then you are stuck in the firmware update screen
tomorrow I leave on holiday and was planning for nice 3d pictures and movies but I am screwed...
Lagamorph said:
Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!
Click to expand...
Click to collapse
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1
That does not work for our problem, just a blank screen is better than stuck in firmware update mode :s
m33ts4k0z said:
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1
Click to expand...
Click to collapse
I'm afraid that didn't work (I think I'm gonna cry soon)
When I go to the Customer Support option, the last option isn't called Emergency it's called "Recovery Phone" and seems to launch exactly the same thing as it does if I click the big "Start Updating" button. There is no option named Emergency at all. Does that mean my phone isn't/wont/can't boot into Emergency mode?
I don't even hold down the power button for my phone to switch on, the second I insert the battery it boots into Clockwork Recovery. If I power off the phone and connect the USB, I don't get the battery charging animation or anything, the screen just remains completely blank. Then if I press the power button (alone or with anything else) it just boots to Clockwork recovery.
The LG Mobile Support Tool seems to detect the phone in this state, but as I said, when it tries to do the download, I just get an error saying "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". The version of the Mobile Support Tool that it's installing is 1.5.1.8 after downloading from your provided link, just incase you need to know that. It seems the tool automatically updates itself on every launch.
Someone also seems to have posted the actual ROM in this thread, http://forum.xda-developers.com/showthread.php?t=1155874 would installing this perhaps assist? Is it even possible to install this when my phone wont boot up past the recovery manager? If it is possible can someone perhaps advise me how?
__________
P_U_A_John said:
Try the following thread http://forum.xda-developers.com/showthread.php?p=15782541#post15782541
Click to expand...
Click to collapse
Unfortunately the phone wont boot into Emergency mode. The clockwork Recovery mod seems to have taken over all of the boot options. If I hold the volume up key and press the power button, nothing happens. If I hold the volume down key and the power button, it boots to clockwork recovery. If I just press power, boots to clockwork recovery.
Is there any way to strip off Clockwork recovery and restore the original/stock recovery onto the phone? Or even just remove Clockwork recovery so that it just hangs on the LG boot screen? (See reasoning for this below)
I can still select the USB mount option in Clockwork recovery and the PC still picks it up as a storage device and I can browse around.
The phone is only 7 days old, so I'm almost tempted to just delete the internal memory so that clockwork doesn't show up, then take the phone back to the store and say it wont boot up and try to get it replaced.
Or what would happen if I renamed the clockworkmod folder on the phone's hard drive?
(Just another note, I don't have an external SD card in the phone, just the internal memory)
__________
P_U_A_John said:
1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.
1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.
Click to expand...
Click to collapse
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk
ik911 said:
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
How else can I put it into Recovery Mode? How can I tell if I've done it right?
I managed to hold the up volume key and hold down the power button, and the LG Mobile Update detected the phone whilst the screen was blank. I thought that meant I was in recovery mode?
I should point out that the LG Logo wasn't flashing up however. I only ever see the LG Logo before it boots into Clockwork RecoveryMod
I also got that fatal error thing when i bricked my phone. For me the phone would start flashing but it got stuck at 17% and then an error followed saying that there was a communication problem between the phone and the pc. My solution was to switch from my desktop computer to my laptop and the procedure ran smoothly after.
You said that the phone powers up directly after you connect it to the pc and while having the support tool running?
You can try to shut it down so it shows a black screen as you said and then try to boot into emergency mode with the vol.up+power button.
The windows sounds might help you on that. you can listen from the computer when the phone connects/powers up or not.
EDIT: Just read your post, if the phone remains black is a good thing.
if your update fails or goes into clockwork recovery etc you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 sec, connect battery and usb cable hold power and volume up hold it for 10 sec let go then do it again for 10 sec
now run LG mobile update click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update
Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?
Lagamorph said:
Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?
Click to expand...
Click to collapse
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.
m33ts4k0z said:
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.
Click to expand...
Click to collapse
Is applying the Stock Firmware not what I did with the LG Mobile Support Tool when it downloaded that huge 300MB+ file?
I have contacted the customer services for Carphone Warehouse, and the guy advised that if the phone seemed to have developed a fault and wouldn't start, then since it's within 28 days of purcahse I can get a like for like replacement. Might have to go ahead and do that this evening.
Hi Guys,
Sorry but I rooted my Wife's phone, installed CWM and flashed recovery, then tried a few roms and she wants it back to stock - go figure..
Anyway I can restore stock rom from recovery, however then when the phone advises there is an update available, it reboots into CWM Recovery then gets in a boot loop and says it can not mount e drive.
So I load up the custom rom, reboot into recovery, restore the stock rom, then back to square one above that it won't update itself if that makes sense..
So my question is how do I restore stock recovery and do you think that will solve the issue?
Thanks
Try this http://forum.xda-developers.com/showthread.php?t=1287236
or
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2
wow you live in gold coast like my relatives(surfers paradise,broad beach)
to have a stock recovery you must flash a kdz stock rom or use the LG tool via pc,and try with the emergency menu of the tool
Wow, small world yes that's the one!
I was going to try the KDZ method but I don't have the IMEI number and that method mentions having to type in the IMEI number?
I am trying this http://forum.xda-developers.com/showthread.php?t=1244490 instead will that do it too?
Thanks
With kdz method you don't need the IMEI
Thanks mate I will try that... so leave SIM in and just go for it with KDZ?
Yes.........
Sorry to sound like such a noob but I can't boot the phone to turn on USB debugging mode, and it's not installing the drivers, just keeps saying USB device not recognised...
All I can get to is CWM recovery menu?
Help~!
Plug in the phone with download mode "Vol up + power"
Thanks I was trying that but it wasn't working?
One of the USB devices attached to this computer has malfunctioned and is not working...
That's all I get?
You se this image after reboot??http://img834.imageshack.us/img834/4918/img0865xl.jpg
If yes try with this cable and bin firmwarew(method).
http://img801.imageshack.us/img801/9052/800pxusbmicrob.png
No I do not get that screen, either nothing happens or it boots like normal to CWM Recovery, damn I've really messed this up!
adixtra said:
Plug in the phone with download mode "Vol up + power"
Click to expand...
Click to collapse
Hi sorry I must be doing something wrong to enter download mode..
What are the exact steps please?
Hold buttons first then plug in cable or have cable plugged in first?
Thanks
recovery
use lg recovery get imie with phone *#06#
Thanks I now have the IMEI and S/N however when I click to check the IMEI in the recovery tool it says wrong information and try again and closes?
I have double triple checked and I am entering it correctly?
Now onto this http://forum.xda-developers.com/showthread.php?t=1181071 thread and onto a second, clean, 32bit computer and still the same problems....
So I hold down the volume up and power buttons, the computer recongnises it and starts to install the drivers then says driver installation failed and LG Mobile Support Tool does not connect the phone?
And now a blue screen on the new clean computer, wow this is quality software from LG, no surprise really!
HOLD THE FORT!
After the blue screen reboot on the new computer, I tried again and it connected!
At first the IMEI check failed but then I thought to enter the IMEI with no dashes, and it worked!
Clean install is downloading now via the Recovery tool, phew.. I hope nothing else goes wrong!
Something went wrong with my 930T when I tried to flash the deodexed rom and root. Now the phone is stuck on an all-black screen and is only recognized by my computer as Qualcomm HS-USB QDLoader. Is there a straight-forward (or non-straightforward) way to get the phone into download mode or to manually restore it.
rp3 said:
Something went wrong with my 930T when I tried to flash the deodexed rom and root. Now the phone is stuck on an all-black screen and is only recognized by my computer as Qualcomm HS-USB QDLoader. Is there a straight-forward (or non-straightforward) way to get the phone into download mode or to manually restore it.
Click to expand...
Click to collapse
Did the problem occur after the flash of the rom or after rooting?
And have you tried putting it in recovery mode or download mode already?
It occurred after rooting. I have tried to use various key presses (no responses when not connected to a computer, power down for a while does get a disconnect sound from windows). Nothing has gotten anything to pop up on screen. I have the odin restore files ready once I figure out how to get the phone to download mode.
KillerClaw321 said:
Did the problem occur after the flash of the rom or after rooting?
And have you tried putting it in recovery mode or download mode already?
Click to expand...
Click to collapse
Maybe this will help. Seems like a good direction to start in
http://www.androidbrick.com/download/qdloader-hs-usb-driver/
Possible Fix
rp3 said:
It occurred after rooting. I have tried to use various key presses (no responses when not connected to a computer, power down for a while does get a disconnect sound from windows). Nothing has gotten anything to pop up on screen. I have the odin restore files ready once I figure out how to get the phone to download mode.
Click to expand...
Click to collapse
*Also Before you try this turn it off and let it charge for an hour or so...*
So in that case I'd attempt the same key presses to put it in download mode even if nothing is displayed...
1. Volume Down + Power + Home to put it in download mode
2. Then press Volume Up to continue past the warning screen even if nothing is displayed.
3. Grab The Latest Version of Odin here
4. Then Download The Stock Firmware, in this case you will need whichever version you have (if you do not remember you can just download the latest available firmware) Download Firmware and then extract it. (If you have 5 different files in the zip go to step 8)
5. Then install Samsung device drivers(if not already).
6. Start Odin, Plug in the S7, Load in the tar.md5 in the AP/PDA and uncheck Auto Reboot and Repartition.
7. Let the phone restart... VIOLA!!!
8. Alternatively if the zip has 5 files... They should all start with the corresponding buttons in Odin For Example:
AP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930TUVS3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G930TTMB3APD8_CL7856276_QB9546176_REV02_user_low_ship_MULTI_CERT.tar.md5
After they are entered into Odin you hit start and after a few minutes ... It should be fixed....
Let me know if you have any further questions or issues...
---------- Post added at 01:22 AM ---------- Previous post was at 01:18 AM ----------
rp3 said:
It occurred after rooting. I have tried to use various key presses (no responses when not connected to a computer, power down for a while does get a disconnect sound from windows). Nothing has gotten anything to pop up on screen. I have the odin restore files ready once I figure out how to get the phone to download mode.
Click to expand...
Click to collapse
Oh actually this might work: http://www.androidbrick.com/unbrick-all-qualcomm-snapdragons-from-qualcomm-hs-usb-qdloader-9008-if-you-have-the-right-kind-of-rom-qhsusb_dload/
Thanks for the ideas. I tried the reboot to no avail. Luckily, T-mobile customer support is very good and they are sending me a new phone for a Wednesday pickup.
Ok so my fiancé pointed out that her phone got an update and I liked how it looked so I wanted to update mine. but I couldn't because of root. and so since I never use my root I went into super su and hit the unroot button and then my phone reset I have been in bootloop ever since. before someone suggests NO I cannot use ODIN because it wont register my phone being plugged in. YES I have the proper driver installed I triple checked and no my computer does not register the phone either. is there anything that I can do?
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
Nice tut! Anyway, if he still can't get recognized by PC, i suggest to try different PC, i had the same problem a while ago, my pc wouldn't recognize my phone in odin no matter what. Then i checked on my friends PC and it worked like a charm. It must be USB ports problems.
if your pc does see your phone but the odin still fails you can just use smartswitch and do emergency recovery tyoe your model number and imei in and sit back and relax and you are done
Thank YOU!!!!!!
Aria.A97 said:
You didnt kill your phone!!!
The reason of bootloop is that when you press unroot in superSU it also restores unpatched stock boot.img which doesn't boot with custom recovery.
Hold power + home + volume up + volume down for 7 seconds to hard reboot your phone and enter download mode confirmation page. Press volume down to exit downloading mode and immediately hold volume up + power + home until you enter recovery. Do a factory reset.
Enter download mode confirmation page again by same method and press volume up, connect phone to your PC. Now if Odin doesn't recognize your phone then that 100% Driver or USB Cable problem. Flash latest official firmware and you should be good to go.
Click to expand...
Click to collapse
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Xeodia said:
You are a genius It was my cable that I was using... I was sitting here reading your post and I'm thinking to my self "yeah like I haven't tried that already thanks for nothing." then I saw the part about my cable and said its worth a shot. thank you so much I was so scared and frustrated about possible being without a phone... Thank you again
Click to expand...
Click to collapse
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
just use odin to flash firmware.
vlatkonexus4 said:
Hey guys since my s6 SM-G920F is with tripped knox status 0x1 i can't use smartswitch for emergency recovery it stucks on 94% always with hours,what is the main reason of that i tried on other pc it is the same,my cable is ok because it charges s6 without any singl problem!sorry for interuppt in this thread like idiot but what is about smartswitch stucks always on 94%?!!!
anyone help me:crying:
Click to expand...
Click to collapse
Nonsense.... I used it when I trashed my EFS / Modem
Smart Switch does work, check your USB drivers and internet connection.
At the end of the process smart switch does verify a lot of thing, when your CPU from your computer is slow it will hang a long time on 94%
i can try via teamviewer to help you