Database Info

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.

I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.

djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.

cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either

Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen

philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.

huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either

So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen

I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.

i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck

fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.

no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?

I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.

I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.

hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (

after i have gone to download mode. my computer cannot recognize my device. help me please.

to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

Phone will not boot past recovery. Please help, major panic!!

Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!

Unfortunatly, you've managed to do the same as I have... leave the phone for e a few days and wait for a rom that you can install via clockwork recovery, you'll have your phone up and running again. Dont do as I did and wipe the recovery from the phone, it will result in a total brick (or at least a brick till LG releaase a full rom update (could be months yet...).

Oh man, I'm panicking so much that I might have ruined the phone now.....

read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389

madshaun1984 said:
read this thread for more info... http://forum.xda-developers.com/showthread.php?p=15762389#post15762389
Click to expand...
Click to collapse
I'm not sure what I'm looking for there, I've looked through that thread but it doesn't seem relevant to the problem I'm having.

I have the same problem, if you put it into emergency mode you can update to 10d but then its even worse then you are stuck in the firmware update screen
tomorrow I leave on holiday and was planning for nice 3d pictures and movies but I am screwed...

Lagamorph said:
Oh dear.....I hope I haven't destroyed my O3D....
I was attempting to install the V10D update, so used the backup I took right after rooting and installing ROM Manager to restore the phone to its status before installing the performance pack. If I tried installing the update OTA before this I just got an invalid package error.
So the restore went well and it rebooted fine. So I ran the update again, and it downloaded and appeared to install, but when the phone rebooted it just booted straight into the recovery. I tried to get it to reboot again, but again it just booted back into recovery.
Ok, nothing to worry about I thought, I just ran the restore again with the same restore point as before....but after it finished it's still booting back up into the recovery!!! No matter what I do the phone just seems to keep booting into the recovery menu. I've tried booting into emergency mode by powering the phone off, then holding the UP Volume key and holding power, but it doesn't seem to work.
Can anyone help? Please?
Lil update -
When powering off the phone and then connecting it to the USB cable, it automatically boots into recovery mode without me even touching the power button. At this point the LG Mobile Update detects the phone and advises me that there's an update available. I try to apply this, but after entering the SN and IMEI, it just gives me a message "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". I get the same error if I use the recovery Phone option. This always happens at the download stage, so is it possible that it's just failing to download the update from LG rather than actually do anything with the phone?
Please don't tell me I've ruined my brand new phone!!
Click to expand...
Click to collapse
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1

That does not work for our problem, just a blank screen is better than stuck in firmware update mode :s

m33ts4k0z said:
Don't panic, I managed to totally brick my phone today and LG told me to send it back for DOA but I managed to recover it in the end.
My phone wouldn't show anything on the screen, it remained black so I can say your position sounds much better than mine.
What you will need:
USB Drivers - Download from here (Check note)
LG Mobile Support Tool (LGMST) - Download from here
Before you start: Disconnect the phone from the computer and totally remove the battery.
So here we go:
!!!REMOVE ALL THE LG USB DRIVERS FROM THE SYSTEM BEFORE YOU CONTINUE!!! Go to add remove programs, select the LG United entry and then uninstall it.
First install the USB Driver from the link above and wait until it has finished with the setup.
Then run the LGMST. When it starts and it says "Disconnected." then put the battery back to the phone and connect the phone to the computer.
Press ONLY the Power button and wait until something happens. If you see that the phones boots and the LGMST starts it by itself then wait till it stops with all the information gathering stuff.
Then regardless of what the program says of you having an update or not, DON'T START THAT UPDATE!
Click on alt on the keyboard and the from the menus at the top select Customer and then emergency(the last option).
Type in the phones IMEI (located at the box of the phone or on a sticker under the battery) without dashes, just numbers.
Finally click on Check and follow the instructions on the screen.
You should be ready as new after 10-15 minutes with the standard V10B firmware and you should not even lose data.
Tell me if that helped so if it didn't we can still fix it I'm sure
Note: I'm aware that 3.3.0 is the latest USB driver that it ships with the phone but for some reason I had only success to flash the phone using the older 3.2.1
Click to expand...
Click to collapse
I'm afraid that didn't work (I think I'm gonna cry soon)
When I go to the Customer Support option, the last option isn't called Emergency it's called "Recovery Phone" and seems to launch exactly the same thing as it does if I click the big "Start Updating" button. There is no option named Emergency at all. Does that mean my phone isn't/wont/can't boot into Emergency mode?
I don't even hold down the power button for my phone to switch on, the second I insert the battery it boots into Clockwork Recovery. If I power off the phone and connect the USB, I don't get the battery charging animation or anything, the screen just remains completely blank. Then if I press the power button (alone or with anything else) it just boots to Clockwork recovery.
The LG Mobile Support Tool seems to detect the phone in this state, but as I said, when it tries to do the download, I just get an error saying "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update". The version of the Mobile Support Tool that it's installing is 1.5.1.8 after downloading from your provided link, just incase you need to know that. It seems the tool automatically updates itself on every launch.
Someone also seems to have posted the actual ROM in this thread, http://forum.xda-developers.com/showthread.php?t=1155874 would installing this perhaps assist? Is it even possible to install this when my phone wont boot up past the recovery manager? If it is possible can someone perhaps advise me how?

__________

P_U_A_John said:
Try the following thread http://forum.xda-developers.com/showthread.php?p=15782541#post15782541
Click to expand...
Click to collapse
Unfortunately the phone wont boot into Emergency mode. The clockwork Recovery mod seems to have taken over all of the boot options. If I hold the volume up key and press the power button, nothing happens. If I hold the volume down key and the power button, it boots to clockwork recovery. If I just press power, boots to clockwork recovery.
Is there any way to strip off Clockwork recovery and restore the original/stock recovery onto the phone? Or even just remove Clockwork recovery so that it just hangs on the LG boot screen? (See reasoning for this below)
I can still select the USB mount option in Clockwork recovery and the PC still picks it up as a storage device and I can browse around.
The phone is only 7 days old, so I'm almost tempted to just delete the internal memory so that clockwork doesn't show up, then take the phone back to the store and say it wont boot up and try to get it replaced.
Or what would happen if I renamed the clockworkmod folder on the phone's hard drive?
(Just another note, I don't have an external SD card in the phone, just the internal memory)

__________

P_U_A_John said:
1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.

1)Plug USB cable
2)Hold "POWER+VOL.UP" (Wait logo LG and mobile screen off) 10 seconds !! For Emergency mode!
3)Hold a second time "POWER+VOL.UP" 10 seconds (the mobile is detected by LGMobile update)
The screen is off in this mode.
PS:
I am trying to upload a backup of the rom.
You may be able to restore from the recovery clockwork ... but it must be 4.0.0.9
Click to expand...
Click to collapse
I do have 4.0.0.9 of the ClockworkMod recovery.
I've tried holding the up volume key and then holding the power key, and I do seem to get emergency mode with the LG Mobile update software detects the phone (with no Clockwork Recovery mod showing on screen) however when I try to use the Recovery phone option, I still get the same error "Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update"
If you can upload a backup of the ROM and advise on how to install it via Clockwork, you will be my hero.
Click to expand...
Click to collapse
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk

ik911 said:
I had the same error "fatal error " your not putting it in recovery mode right I fixed myn
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
How else can I put it into Recovery Mode? How can I tell if I've done it right?
I managed to hold the up volume key and hold down the power button, and the LG Mobile Update detected the phone whilst the screen was blank. I thought that meant I was in recovery mode?
I should point out that the LG Logo wasn't flashing up however. I only ever see the LG Logo before it boots into Clockwork RecoveryMod

I also got that fatal error thing when i bricked my phone. For me the phone would start flashing but it got stuck at 17% and then an error followed saying that there was a communication problem between the phone and the pc. My solution was to switch from my desktop computer to my laptop and the procedure ran smoothly after.
You said that the phone powers up directly after you connect it to the pc and while having the support tool running?
You can try to shut it down so it shows a black screen as you said and then try to boot into emergency mode with the vol.up+power button.
The windows sounds might help you on that. you can listen from the computer when the phone connects/powers up or not.
EDIT: Just read your post, if the phone remains black is a good thing.

if your update fails or goes into clockwork recovery etc you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 sec, connect battery and usb cable hold power and volume up hold it for 10 sec let go then do it again for 10 sec
now run LG mobile update click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update

Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?

Lagamorph said:
Well I'm not sure what I did differently. Not sure if I wasn't pressing the button hard enough or my finger was slipping off, or if I've just somehow tricked the phone, but the LG Phone Update from the Phone Recovery option is now running.
I've been doing the same thing I was doing before (or at least thought I was doing) and I'm not sure what I did differently....but....fingers crossed..... the download will finish in 40 minutes (on a crappy connection at the moment) so I'll be able to see what happens then....
UPDATE -
Progress, though not quite yet success.
The LG Mobile Support tool downloaded the software and applied the update succesfully, though my phone didn't automatically restart. I pressed the power button however and it loaded up and not into Clockwork Recovery Mod. It's not however sitting on an "Updating Firmware" screen and the progress bar doesn't seem to be filling at all.
How long does this part of the process normally take?
Does the phone need to be connected to USB for this part of the process? The LG Mobile Support Tool says the phone is disconnected so I'm guessing there's no active data connection between the PC and phone, just power.
Does this normally take a while? Or should I perhaps try the recovery again?
Click to expand...
Click to collapse
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.

m33ts4k0z said:
This is only supposed to happen when you apply the OTA update. Try to reapply the stock firmware in emergency mode. After the program applies the firmware, it should boot up the phone by itself in android and give you a success or finish message on the computer.
Click to expand...
Click to collapse
Is applying the Stock Firmware not what I did with the LG Mobile Support Tool when it downloaded that huge 300MB+ file?
I have contacted the customer services for Carphone Warehouse, and the guy advised that if the phone seemed to have developed a fault and wouldn't start, then since it's within 28 days of purcahse I can get a like for like replacement. Might have to go ahead and do that this evening.

Emergency mode LG P500

After flashing baseband, second time today, my phone go to emergency mode during flashing and after half hour and more nothing happend. Now, phone is always in emergency mode, and nothing i can to do. Backup i have, but LGMDP-v1.5 dont recognize phone and i dont can go to recovery mode. And KDZ Updater dont see phone.
Does for this phone has hope?
p.s. Sorry for my bad english.

Just don't mess with it now!! Just take it to service center they'll fix it!! If u try repairing it on ur now brick it totally!!! Just don't mess with it just take to service center!!!!!
Sent from my LG-P500 using xda app-developers app

Ok. Tnx ..

You can remove the battery IF YOU WERE FLASHING BASEBAND ONLY
then put battery back and press vol up + back + power and phone will go in emergency mode
disable all lg modems in device manager, then flash baseband again and it will work

I remove battery ~10 times, and phone always automatticly go in emergency mode when i back up battery, but device is not recognize by tool like a LGMDP-v1.5, lg studio kdz updater on computer.

1. remove battery
2. put battery back
3. press power button+ volume up button + back button together
4. keep buttons pressed and phone will go in emergency mode
5. now lgmdp will recognize device

@TheAndroidGeek
I do what you write to me, and lgmdp recongnize the phone but when i click connect button lgmdp is notifier with message 'Error! can't open serial port (rebot and reconnect).'
What next?

goran9888 said:
@TheAndroidGeek
I do what you write to me, and lgmdp recongnize the phone but when i click connect button lgmdp is notifier with message 'Error! can't open serial port (rebot and reconnect).'
What next?
Click to expand...
Click to collapse
Disable modem drivers (LG) in Device manager!

In Device Manager is disabled only LGE Virtual Modem because he is only there. But error is still there in lgmdp.

Hooo ...
I back phone in life with this tutorial: http://forum.xda-developers.com/showthread.php?t=1197111
Thanks to xzet2 for that tutorial.
Now, i installed this ROM: http://forum.xda-developers.com/showthread.php?t=1818219
But i dont have service again (no signal - baseband is unknown). With android 2.2.2. is all ok (have service, baseband v10e is show and all work ok) but i want ics.
I trie to flash baseband to P500-v20G but lgmdp dont see phone when this ics rom installed. When installed android 2.2.2 lgmdp see phone.
In Device manager LGE Virtual Modem is disabled.
What to do?
Does ok to install ROM with android 2.2.2 and then flash baseband on v20g version and then install ics, or what?

And again hoooo ...
I start phone in emergency mode, run lgmdp and flash baseband. That all work 10 seconds, and wala ... now i have new baseband and ics rom.
Thanks!

Emergency mode and only lg logo
Hi,
MY lg p500 suddenly stopped working. upon switching on it only shows LG logo... tried hard set button. but nothing worked. searched on google, find kdz, lgmdp, android adb ( fastboot mode) , LG Utils....i tried all the option but nothing seems to work....
i realised that my micro-sd got corrupted causing this problem then i changed my card and again tried but finding same situation.
1.=when i detach my usb and remove battery and again putting battery and pressing combination of " RETURN + VOL UP + POWER" my phone goes into EMERGENCY MODE.
2. when i put usb cable, its just shows lg logo, nothing else. on pressing HOME BUTTON , it shows
" FASTBOOT MODE STARTED
UDC_STARTED()
-- SUSPEND--
--RESET--
--PORTCHANGE--
--RESET--
--PORTCHANGE--
is there any hope to bring it into life ?????
Please help me
p.s :
1. KDZ UPDATE : I TRIED V20D.00.KDZ FILE . it show " upgrade error error code =6" .
( tried all three mode " DIAG, EMERGENCY, CS_EMERGENCY) but got same error for all the mode option.
2. lgmdp : upon connecting doesnt shows any thing in NV backup .
3. Android adb : on doing "fastboot erase recovery" it just keep on showing " waiting for device"....
4. LG utils : on selecting "I" option ( for extracting kdz ) the LG utils carshes.
is there any hope for my phone ????

thanks a lot, its works
Thanks a lot, it works perfect.
TheAndroidGeek said:
You can remove the battery IF YOU WERE FLASHING BASEBAND ONLY
then put battery back and press vol up + back + power and phone will go in emergency mode
disable all lg modems in device manager, then flash baseband again and it will work
Click to expand...
Click to collapse

I went to update my lg p-500h and it went into emergency mode anyway I can get my phone back up again

Note 10.1 N8000 Won't start

Hello,
I tried to update my note 10.1 gt-8000 today using the instructions from droid opinion website. I did not remove any partition or stuff. Just uploaded the rom Image in AP, selected auto reboot and F reset time and this i. but when the phone went to restart, it wont start again. Its been 30 minutes and phone is still off. I press the power button, volume + power up or down but nothing happens. Is my tablet hard bricked? Any idea whats wrong with it? Please help me
Edit: I just noticed when I also put it on the charge, the screen doesnt turn on to show charging. So it doesnt even charge, the odin console had 1 pass and 0 fail. Any idea what went wrong?

Go back to Droid opinion they are responsible .
Reread and double check instructions and correct firmware for your phone .
My guess is wrong firmware what was the original firmware .

JJEgan said:
Go back to Droid opinion they are responsible .
Reread and double check instructions and correct firmware for your phone .
My guess is wrong firmware what was the original firmware .
Click to expand...
Click to collapse
Thanks for your reply. So it means its hard bricked? When i plug in the charger it dont even show charging sign. Any way to fix it?

Does Odin work? If it works, try to re-flash your device according to the instructions. Otherwise, install the stock firmware.

CheeryLee said:
Does Odin work? If it works, try to re-flash your device according to the instructions. Otherwise, install the stock firmware.
Click to expand...
Click to collapse
Thanks for your reply. The odin dont work. Can you please tell me how to install the stock firmware?

Stock flash via Odin.
See threads.

Abdul.B said:
Thanks for your reply. The odin dont work. Can you please tell me how to install the stock firmware?
Click to expand...
Click to collapse
Sure, I can help you.
What OS do you have? Try to install Fastboot and ADB tools. After that, enter in download mode (not recovery!) and connect your device with computer.
ADB Devices will test the connection.
Next use Fastboot to flash.
If you have questions, pleask ask them. It will protect you from wrong actions.

CheeryLee said:
Sure, I can help you.
What OS do you have? Try to install Fastboot and ADB tools. After that, enter in download mode (not recovery!) and connect your device with computer.
ADB Devices will test the connection.
Next use Fastboot to flash.
If you have questions, pleask ask them. It will protect you from wrong actions.
Click to expand...
Click to collapse
The problem is i cannot enter download or recovery mode. I press the power plus volume down button and nothing happens. Even when i plug in the charger nothing is shown on the screen.

power on or no power?
Abdul.B said:
The problem is i cannot enter download or recovery mode. I press the power plus volume down button and nothing happens. Even when i plug in the charger nothing is shown on the screen.
Click to expand...
Click to collapse
I got mine working by opening the back cover (check instruction from Youtube)
unplug the power plug (the black small block in the middle with Red/Blue/Black colour cables), leave it for few minutes, plug it black.
This will only work if you have the "Samsung Note 10.1 logo" flashing in loop on screen all the time.
Good luck

[help]Creating a back up from an Admire 2 and using it for one that its stuck in boot

Hello, I have two Galaxy Admire 2, one of them is stuck in the boot animation and the other one is working fine. I want to know how to make a backup from the phone thats working and fix the other one. I tried making a nandroid backup to an sd card and then trying to "Upgrade" the other phone in recovery mode but it did not work (signature verification error). Then I tried to flash it (I dont know if thats the correct term) with odin and the md5 file from the backup that I previously made but I got the "value invalid error". I renamed it and deleted the ".md5" but then Odin just crashed each time I choose it. I dont find any md5 file for this phone anywhere so I turn to you guys for help on making one myself or whatever I need to do to fix the other phone. I just need directions. Thanks and please explain like im five.

You can try to restore the bricked phone using Kies. You need a PC, a usb-micro USB cable and your phone in downltad mode(if you don't know how to set the phone in download mode you need to turn it on by pressing the power button, the volume down button and the home button both)

joe2k01 said:
You can try to restore the bricked phone using Kies. You need a PC, a usb-micro USB cable and your phone in downltad mode(if you don't know how to set the phone in download mode you need to turn it on by pressing the power button, the volume down button and the home button both)
Click to expand...
Click to collapse
Thanks you! I tried it but for some reason it just stays in "connecting" when I connect the phone and then like 10 minutes later it says that the phone is not responding.

It can be a problem with your drivers or with the kies version. Try to update the driver and if is still not working try to download a previous version of kies.