Database Info

Lg optimus one died

Please help, my LG Optimus One won't even start anymore - I was using KDZ Updater and an error came up, I turned it off and tried to turn it back on, but nothing happens - it doesn't do anything, I press the button and nothing happens.

Take it to the warranty service. Tell them that you tried to update the firmware via official lg tool and something went wrong.
Sent from my LG-P500 using XDA Premium App

Acoole said:
Please help, my LG Optimus One won't even start anymore - I was using KDZ Updater and an error came up, I turned it off and tried to turn it back on, but nothing happens - it doesn't do anything, I press the button and nothing happens.
Click to expand...
Click to collapse
have u tried this http://forum.xda-developers.com/showthread.php?t=883314
and get some info on setting the drivers and stuff here http://forum.xda-developers.com/showthread.php?t=1038338

KDZ Updater guide
Acoole said:
Please help, my LG Optimus One won't even start anymore - I was using KDZ Updater and an error came up, I turned it off and tried to turn it back on, but nothing happens - it doesn't do anything, I press the button and nothing happens.
Click to expand...
Click to collapse
I cant help u out in this situation u should contact to LG but prefer u that in future if u faced any of this situation dont disconnect ur phone in EMERGENCY MODE, if in case of any error while updating or downgrading then at the same time restart KDZ Updater and flash ur phone with a working rom. (Officially available by LG)
Bhawan

Anyone have any other fixes for this? Can't send back to LG as I bought it off eBay.

Acoole said:
Anyone have any other fixes for this? Can't send back to LG as I bought it off eBay.
Click to expand...
Click to collapse
Still get it to LG service they will service it , and will charge you.
Sent from my LG-P500 using XDA Premium App

Resurrect your P500
Acoole said:
Anyone have any other fixes for this? Can't send back to LG as I bought it off eBay.
Click to expand...
Click to collapse
- don't worry , stay calm i brick'ed my phone like 50 times, i brick'ed so bad it diden't want to start, power button was usless.
TRY this:
- remove battery , while holding the UP volume key and back button connect it to PC via USB Emergency mode should apear , then open KDZ and install via 3GQCT and EMERGENCY an original/stock firmware ( Froyo 2.2.2 v10E.kdz http://www.4shared.com/file/O3Nw1b4s/V10E_00.html )
- after KDZ finishes an animation will apear , then you must put back the battery.
- things that you may encounter , errors in KDZ , phone fails to start after KDZ resets it , KDZ successfully installs rom and powers off phone when you power on phone it stopps at Android logo, sometimes the android logo animation work's and lags for 2 3 seconds (do a battery pull, put it back then power on the phone if it lags then you must reflash) , you must do a battery pull, connect usb without battery and chose DIAG in KDZ, reflash. ​
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
you can install Froyo 2.2.2 v10E.kdz
>>> http://www.4shared.com/file/O3Nw1b4s/V10E_00.html <<<
sorry for my bad english.
be patient !!
LE: when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i dident saw any difference.)

il tried the hold Up and hold Back button, but nothing happen, the screen is black no emergency mode
help please !!

memeru said:
il tried the hold Up and hold Back button, but nothing happen, the screen is black no emergency mode
help please !!
Click to expand...
Click to collapse
You should hold both buttons by one hand using 2 fingers and simultaneously connect it to pc through usb cable to enter into emergency mode..its a bit tricky..just by only pressing two button nothing will happen.
Sent from my LG-P500 using xda premium

xzet2 said:
- don't worry , stay calm i brick'ed my phone like 50 times, i brick'ed so bad it diden't want to start, power button was usless.
TRY this:
- remove battery , while holding the UP volume key and back button connect it to PC via USB Emergency mode should apear , then open KDZ and install via 3GQCT and EMERGENCY an original/stock firmware ( Froyo 2.2.2 v10E.kdz
- after KDZ finishes an animation will apear , then you must put back the battery.
- things that you may encounter , errors in KDZ , phone fails to start after KDZ resets it , KDZ successfully installs rom and powers off phone when you power on phone it stopps at Android logo, sometimes the android logo animation work's and lags for 2 3 seconds (do a battery pull, put it back then power on the phone if it lags then you must reflash) , you must do a battery pull, connect usb without battery and chose DIAG in KDZ, reflash. ​
- as i was saying i killed my phone alot of times, KDZ always helped me bring it back to life , be patient.. and if you get alot of errors and flash meny times the phone gets hot , leave it to cool for a while and then try again.
you can install Froyo 2.2.2 v10E.kdz
>>> <<<
sorry for my bad english.
be patient !!
LE: when phone is connected go to COMPUTER > PROPERTIES > DEVICE MANAGER > MODEMS > and disable LGE Modem.. (some say it helps i dident saw any difference.)
Click to expand...
Click to collapse
Nothing happens. Can I try anything else before I take it to LG Service Center?
P.S: Removed the URLs as XDA would not allow me to post.

Just go to the service, i had this problem twice , but i just go to the LG service and they changed my phone mainboard

Yeah. That's what they said to me too. Will be a week without my phone now.

well my warranty has been over
so normally send to service center they will charge right ?
furthermore, almost everytime flash to v20g (gingerbread official ROM) my phone sure can't turn on
so flash back to v10g (froyo official ROM) then said something param error, and my phone matter how I turn on also black screen
which either turn on in emergency mode (back + volume up + power), factory reset (volume down + home + power) and normal turn on phone
try charge the phone also no respond

Refer this THREAD..!!
Might help.

rr0yy said:
Refer this THREAD..!!
Might help.
Click to expand...
Click to collapse
tried already
as I said can't even turn on into emergency mode

Then you have no other choice then to go to LG Service Center.
Find one with JTAG.. it will cost you less. Otherwise it will be costly!!

rr0yy said:
Then you have no other choice then to go to LG Service Center.
Find one with JTAG.. it will cost you less. Otherwise it will be costly!!
Click to expand...
Click to collapse
what is JTAG ? mind explain ?
and my warranty has been over
they normally will charge right ?

I will explain you in a simple way.. when you do a hard brick, you actually corrupt the IC data.
The main IC ( processor) on the board is a programmed one. (We used to program basic 8085 and 8086 processors which used to be a big pain).
So when you hard brick a device.. there is no other option than to change the board (PCB).
But if there is someone well experinced with JTAG.. they can reset and re-program it again.
And it will cost you less than replacing the board.
Not all Service Centre do JTAG though.. hope you find one!!
Yes.. they will charge you!!

did ur fone goes to offline charging mode still?? if yes playing a little wid kdz updater can bring ur fone bak. if nt go for service cntres.

rr0yy said:
I will explain you in a simple way.. when you do a hard brick, you actually corrupt the IC data.
The main IC ( processor) on the board is a programmed one. (We used to program basic 8085 and 8086 processors which used to be a big pain).
So when you hard brick a device.. there is no other option than to change the board (PCB).
But if there is someone well experinced with JTAG.. they can reset and re-program it again.
And it will cost you less than replacing the board.
Not all Service Centre do JTAG though.. hope you find one!!
Yes.. they will charge you!!
Click to expand...
Click to collapse
thanks
hope they charge cheaper @@
navz000 said:
did ur fone goes to offline charging mode still?? if yes playing a little wid kdz updater can bring ur fone bak. if nt go for service cntres.
Click to expand...
Click to collapse
can't, use either computer or AC charger also nothing

[Q] Can only boot by plugging charger????

Hi
Can anyone help please? Also, are there anyone having similar issue.
Issue: Pressing the power button is not starting my device. In order to power on I have to connect charger (not usb with PC) and then press power button. What I have noticed is that once I switch off my phone it gets in to "emergency/recover mode". I came to this conclusion because after I switch the phone off, take battery out and put back in and then connect usb cable with my PC. I can see OMAP driver loads and also in the PC's Device Manager I am able to see LG CDMA.... under "ports".
It was not like this until i started several attempts to flash baseband.
Sequence of actions
Here is the sequence of actions I went through and end up having my phone at this stage
1. Followed the procedure (http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2) step by step using LG flash tool. The application was constantly crashing (PC is running on XP pro). Before flashing baseband I flashed GB hence I lost radio.
2. To bring back my radio I had to reflash 2.2 following the same procedure (emergency recovery method) in the link given in baseband flashing.
3. After finishing the recovery flash I could not start my phone using power button. I started thinking that I bricked my phone. I left it for a day. Then I thought that the battery is fully drained and is the reason for not powering on. When I connected charger I started seeing LG logo and also the phone was started. I was more excited and happy that my phone was not bricked. After this point I need charger connected everytime when i want switch on my phone. so, I am scared to swtich off my phone unless I have charger handy to me.
4. I removed all the application (LG flashing related) including LG drivers I installed before. Now I reinstalled all the necessary app and drivers for baseband flashing. This time baseband flashing was done successfully (though at 22%). Then I flashed GB rom and everything works fine.
The only issue i have is, I can not switch on my phone without charger connected.
If anyone knows solution please help me.
Thanks in advance.

http://forum.xda-developers.com/showthread.php?t=1331390
I used to have the same problem,
I think its a problem about boot,
when I use lg tools it always gives error, because phone wont boot without charger, so it cant continue upgrading
I try flasing original kdz file from lg flash tool, and use emergency rescue mode,
I dont know but it somehow repair the boot
you can fix permissions before you use lg tools.
what error do you have while using lg tool?
can you post the screen capture

nurikarakaya said:
http://forum.xda-developers.com/showthread.php?t=1331390
I used to have the same problem,
I think its a problem about boot,
when I use lg tools it always gives error, because phone wont boot without charger, so it cant continue upgrading
I try flasing original kdz file from lg flash tool, and use emergency rescue mode,
I dont know but it somehow repair the boot
you can fix permissions before you use lg tools.
what error do you have while using lg tool?
can you post the screen capture
Click to expand...
Click to collapse
After i uninstalled all the drivers (incl. LG tools) and reinstalled and I am not seeing any more error while using LG tools. I even flashed GB baseband twice but no use. The link you have given explains the same issue I have.

I think you have to install froyo version of baseband and firmware first,
then try
http://forum.xda-developers.com/showthread.php?t=1186406
STUCK AT LG LOGO:
with factory reset!
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
-If this is the first time the driver install redone the item 5).
6) Click on User/Support then emergency mode, insert your IMEI and click on check
7) Wait for download and upgrading (15/20 min)

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Click to expand...
Click to collapse
Thanks. will stick to the rule in future..

nurikarakaya said:
I think you have to install froyo version of baseband and firmware first,
then try
http://forum.xda-developers.com/showthread.php?t=1186406
STUCK AT LG LOGO:
with factory reset!
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
-If this is the first time the driver install redone the item 5).
6) Click on User/Support then emergency mode, insert your IMEI and click on check
7) Wait for download and upgrading (15/20 min)
Click to expand...
Click to collapse
Thanks. I will try it tonight or will wait for official GB release then i can do the this emergency update.

[Q] Restore stock recovery

Hi Guys,
Sorry but I rooted my Wife's phone, installed CWM and flashed recovery, then tried a few roms and she wants it back to stock - go figure..
Anyway I can restore stock rom from recovery, however then when the phone advises there is an update available, it reboots into CWM Recovery then gets in a boot loop and says it can not mount e drive.
So I load up the custom rom, reboot into recovery, restore the stock rom, then back to square one above that it won't update itself if that makes sense..
So my question is how do I restore stock recovery and do you think that will solve the issue?
Thanks

Try this http://forum.xda-developers.com/showthread.php?t=1287236
or
http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2

wow you live in gold coast like my relatives(surfers paradise,broad beach)
to have a stock recovery you must flash a kdz stock rom or use the LG tool via pc,and try with the emergency menu of the tool

Wow, small world yes that's the one!
I was going to try the KDZ method but I don't have the IMEI number and that method mentions having to type in the IMEI number?
I am trying this http://forum.xda-developers.com/showthread.php?t=1244490 instead will that do it too?
Thanks

With kdz method you don't need the IMEI

Thanks mate I will try that... so leave SIM in and just go for it with KDZ?

Yes.........

Sorry to sound like such a noob but I can't boot the phone to turn on USB debugging mode, and it's not installing the drivers, just keeps saying USB device not recognised...
All I can get to is CWM recovery menu?
Help~!

Plug in the phone with download mode "Vol up + power"

Thanks I was trying that but it wasn't working?

One of the USB devices attached to this computer has malfunctioned and is not working...
That's all I get?

You se this image after reboot??http://img834.imageshack.us/img834/4918/img0865xl.jpg
If yes try with this cable and bin firmwarew(method).
http://img801.imageshack.us/img801/9052/800pxusbmicrob.png

No I do not get that screen, either nothing happens or it boots like normal to CWM Recovery, damn I've really messed this up!

adixtra said:
Plug in the phone with download mode "Vol up + power"
Click to expand...
Click to collapse
Hi sorry I must be doing something wrong to enter download mode..
What are the exact steps please?
Hold buttons first then plug in cable or have cable plugged in first?
Thanks

recovery
use lg recovery get imie with phone *#06#

Thanks I now have the IMEI and S/N however when I click to check the IMEI in the recovery tool it says wrong information and try again and closes?
I have double triple checked and I am entering it correctly?

Now onto this http://forum.xda-developers.com/showthread.php?t=1181071 thread and onto a second, clean, 32bit computer and still the same problems....

So I hold down the volume up and power buttons, the computer recongnises it and starts to install the drivers then says driver installation failed and LG Mobile Support Tool does not connect the phone?

And now a blue screen on the new clean computer, wow this is quality software from LG, no surprise really!

HOLD THE FORT!
After the blue screen reboot on the new computer, I tried again and it connected!
At first the IMEI check failed but then I thought to enter the IMEI with no dashes, and it worked!
Clean install is downloading now via the Recovery tool, phew.. I hope nothing else goes wrong!

Optimus 3d : SU760 bricked

Hello all,
I recently asked a friend to get an optimus 3d from china , he got it for me but it was not p920 but SU760 , i dont care really but when i inserted my dutch sim card the network signal was coming and going often , also the phone was already rooted with clockworkmod rom i tried to reset the phone y going into privacy > delete all data > but clockwork mod rom was still there and the signal was coming and going , so i connected my device into recovery mode to hard reset to latest stock firmware using recovery phone option using samsung tool.
It downloaded 430 mb file and installed the firmware and said completed , but when i powered on the phone i got LG logo and later T world logo like the logo which is on the back pannel and colours changing all the time like a pattern and it was like that for 30 - 40 mins later the screen went lack but all there buttons at the bottom , home entrer and options were illuminated .... no android OS .....
I? tried to recover the phone again via LG software but did not help same result , i am really seperate to get the phone working as it's my first android phone in my life , i really wanted to use it but now i cannot ....
also on all over the internet they talk about o3d p920 and not 03d su760 ...
Please can someone tell me where to find su760 stock firmware and how do i flash it to the lg phone ,,, i cannot even enter hard reset mode using volume key combination and home and power button ,,, seems phone is stuck in a cycle .... please HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Suhail

the 3d comes in two variants su760 for asia i think and p920 for all over the world ...

suhailpuri said:
Hello all,
"... option using samsung tool."
Suhail
Click to expand...
Click to collapse
Samsung? You probably mean LG
suhailpuri said:
Hello all,
"..i cannot even enter hard reset mode using volume key combination and home and power button ,,, seems phone is stuck in a cycle .... please HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!"
Suhail
Click to expand...
Click to collapse
For Hard Reset try this
remove your usb cable
remove your battery
insert battery again
press and hold volume down button
press power button
(you dont have to press 3D button thats for CWM Recovery)
(you also dont have to press the Home button)
after 8-10 seconds it will show you LG logo
release the power button and then the volume button
It will take you to the recovery menu
select yes
then again wipe EVERYTHING
ALL 4 OPTIONS
you can move with volume up and down and with menu key you run the commands
Good Luck

oh sorry i did not use samsung toll its a mistake i used lg update tool ...
xbsall : I tried with volume down and power , but no recovery menu .....
Please someone help !!!!!!!!!!!

suhailpuri said:
oh sorry i did not use samsung toll its a mistake i used lg update tool ...
xbsall : I tried with volume down and power , but no recovery menu .....
Please someone help !!!!!!!!!!!
Click to expand...
Click to collapse
try volume UP and power, sometimes it needs to try several times to get in the CWM.
and its very crucial to do the fully wiping.
i wipe everything before the flashing and after.

i tried volume up and power still nothing ......
Where can i get stock firmware for su760 .....
all sites have it for p920 .........

suhailpuri said:
i tried volume up and power still nothing ......
Where can i get stock firmware for su760 .....
all sites have it for p920 .........
Click to expand...
Click to collapse
heres an other one,
volume down + 3D button + power

suhailpuri said:
i tried volume up and power still nothing ......
Where can i get stock firmware for su760 .....
all sites have it for p920 .........
Click to expand...
Click to collapse
Step 1
download
SU760 V20E ROM from here:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGSU760/ASKTDB/V20e_00/V20E_00.kdz
Step 2
download this
http://forum.xda-developers.com/attachment.php?attachmentid=887870&d=1328537753
Step 3
make sure you have installed your lg phone drivers before continuing to the next step
Step 4
unzip LG_KDZ_FW-Update_OfflineFix.zip
you will find a filename Automatic Offline Procedure.vbs
run it
if everything runs ok it will take you to the upgrade tool if not it will probably show you a windows script host error
if that happens try running it manualy from folder
LG_KDZ_FW-Update_OfflineFix
KDZ_FW_UPD_EN
KDZ_FW_UPD.exe
when KDZ_FW_UPD.exe shows up select Type: 3qct and PhoneMode: Emergency
select your downloaded kdz file , now you should take off you battery , connect the usb cable , press volume up and power button and after 5-6 sec release the buttons and put the batery
Press Launch software update
It will take some time to decompress the files but if everything is ok it will start.
You will see the progress with various messages the last message ends with 0
That should do the job.. Dont forget to press Thanx button if it works.
Good Luck

xsball : thank for a detailed guide , i tried to flash the phone but , the lg flash tool hangs up (not responding)
So i decided to give the phone to LG they are going to fix it or give me a replacement until ...
but thank you for guide maybe it's my computer that is not working properly ....

The KDZ tool needs to run from a Win XP environment. That's how I managed to downgrade my LU620 (also from Korea.)
I've tried over and over to run the program on win 7 but it almost always crashes...

i will try from XP and let you know

xsball : i have used windows XP and followed all steps but still LG R&D tool hangs on xp aswell can i use another 3rd party tool ...... ?
i tried web update it downloads firmware to phone but nothing happens still boot loop

suhailpuri said:
xsball : i have used windows XP and followed all steps but still LG R&D tool hangs on xp aswell can i use another 3rd party tool ...... ?
i tried web update it downloads firmware to phone but nothing happens still boot loop
Click to expand...
Click to collapse
just watch this video i have uploaded the procedure here
if your phone doesnt start put it in download mode like Trekfan422991 does in here (this is p920 but try it might work)

XSball : first thank you for the video , i tried again still no luck also i put it in SW download mode still no luck ....
even formatted my PC did clean install of XP still no luck ...
i can try lg flash tool and making custom usb cable by soldering resistor on cable , but i dont know wher to find su760 bin file ...
or last resource is to send the phone to LG and get it fixed ...

beore you start soldering open a teamviewer session and send me a pm..

http://www.lgmobile.co.kr/mobile-phone/U760/LG-SU760
This is the model number , but sure thing i will PM you and then we can run team viewer session and see what went wrong ...

bricked? ;<
Hey guys :< I tried all the stuff mentioned and still managed to get this screen somehow. Am having serious troubles with this phone. Someone guide me on how to fix this and update to ginger bread :crying:

xbsall said:
Step 1
download
SU760 V20E ROM from here:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGSU760/ASKTDB/V20e_00/V20E_00.kdz
Step 2
download this
http://forum.xda-developers.com/attachment.php?attachmentid=887870&d=1328537753
Step 3
make sure you have installed your lg phone drivers before continuing to the next step
Step 4
unzip LG_KDZ_FW-Update_OfflineFix.zip
you will find a filename Automatic Offline Procedure.vbs
run it
if everything runs ok it will take you to the upgrade tool if not it will probably show you a windows script host error
if that happens try running it manualy from folder
LG_KDZ_FW-Update_OfflineFix
KDZ_FW_UPD_EN
KDZ_FW_UPD.exe
when KDZ_FW_UPD.exe shows up select Type: 3qct and PhoneMode: Emergency
select your downloaded kdz file , now you should take off you battery , connect the usb cable , press volume up and power button and after 5-6 sec release the buttons and put the batery
Press Launch software update
It will take some time to decompress the files but if everything is ok it will start.
You will see the progress with various messages the last message ends with 0
That should do the job.. Dont forget to press Thanx button if it works.
Good Luck
Click to expand...
Click to collapse
i tried this but. my su760 only vibrate and blink when i power it on.
i tried to use lgflash tool but it keep saying wrong dll. i can't find a dll. for su760 help please,,, :crying:

Su760 can also be flashed with p920.dll
4.0.4 SuperG with ACiD Audio LG-P920

my lg su760 bricked or bootloop..
I was flashing a cwm recovery using terminal emulator appp on my lg su 760 ics v30b....i typed the command and clicked enter nothing displayed but it started a new line .... i rebooted normallly and everything was fine...when i typed in command reboot recovery the phone shutdown itself and now it is in kindda this situation when i press the power button it vibrates LG logo appears for 2 seconds and then shutdown itself i hope any one can help me..........

[Q] Possible Bricked P920 (Stuck on Boot) [SOLVED]

Hey there,
In a bit of a dilemma here with my phone.
I was running the XBSA V21E Gingerbread with ICS Theme ROM with the TitanKernel V0.4.2 V21D 09-04-2012.
I decided to install I a new rom without a flash, The Promethius Project V1.4 followed with he latest Promethius Kernel. All went successfully with no errors, according the the boot anyway.
ok...after trying to reboot many times, I have not been able to get any further than the 'LG Boot Logo' I left it on last night as I couldn't be bothered trying to fix it at the time and it stayed on the logo for over 7 hours. (Figured it would nonetheless)
These are the steps that I have tried, of which wont work for me:
1 - Turn off your phone
2 - Press power and volume down until the LG logo apears.
3 - Release the power button but keep the volume down pressed.
This takes you to the recovery screen.
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
6) Click on User/Support then emergency mode, insert your IMEI and click on check - I get a popup saying "Please Check Phone Information Again"
Iv'e done everything with and without the battery in place, I have removed sim and SD card.
Any help would be greatly appreciated.
Kind Regards.
EDIT: Solved!!....huh? How?.... Well my lesson learned is, flash before installing a rom....[GUIDE] Recovering from brick/bootloop
Worked for me anyway

if the case is stuck on LG logo, go to CWM menus, wipe all and reinstall the ROM, install it twice, reboot. (always work for me if I got stuck on LG logo).
sorry for my bad english.

I mentioned that I can't get to the menu in my post.

ow sorry, I didn't notice that you can't go back to CWM menus also.
you are using LG Mobile Support Tool right for recovering?
If not, download LG Mobile Support Tool and run.
- Change Country in Option&Help, select country.
- Download the usb driver, if you are not installed yet.
- Take off your battery
- Connect the phone while holding vol.up and wait until LG support tool detect your phone
- If it connected, go to Customer Support and select Recovery Phone
- insert your IMEI, ok
- wait until it finish downloading and recovery your phone.
If not succeed on downloading, try install PC suite first and redo the steps.
Hope it's work.

I don't mean to be rude, but did you read my post at all? I mentioned that I can't do that either.
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
6) Click on User/Support then emergency mode, insert your IMEI and click on check - I get a popup saying "Please Check Phone Information Again"
Click to expand...
Click to collapse
I get a constant message saying "Please Check Phone Information Again".

Loopy Frog said:
I don't mean to be rude, but did you read my post at all? I mentioned that I can't do that either.
I get a constant message saying "Please Check Phone Information Again".
Click to expand...
Click to collapse
try without battery

andriu123 said:
try without battery
Click to expand...
Click to collapse
Iv'e done everything with and without the battery in place, I have removed sim and SD card.
Click to expand...
Click to collapse
Problem solved now just to inform ya's.
Lesson Learned: "Always Flash before installing new rom"
[GUIDE] Recovering from brick/bootloop

Loopy Frog said:
Problem solved now just to inform ya's.
Lesson Learned: "Always Flash before installing new rom"
[GUIDE] Recovering from brick/bootloop
Click to expand...
Click to collapse
hi can u tell me how you slove your broblem pls i have the same problem

loopy frog said:
Problem solved now just to inform ya's.
Lesson learned: "always flash before installing new rom"
[guide] recovering from brick/bootloop
Click to expand...
Click to collapse
hi can u plz tell me how do u solve ur problem i have same problem stuck on lg logo can u plz share how u fix?