Database Info

i9003 stock rom loop reboot and can t be detected by pc while other mobiles are

Please i need help i m not sure what to do the problem is my phone suddenly started rebooting and went into loop and whenever i open playstore it tells me force close vending error and also my pc can t detect my phone sometimes it says device not recognized and sometimes it says can be used but nothing happening...
- downloaded kies all drivers nothing working
- tried changing cable but didn t work while on other samsungs it worked well nromal
- tried debugg mode mass storage everything that was suggested here in xda and on other sites
- z4root and gingerbreAk not working
Want to root it to flash better firmware vut since i can t detected on pc to root it i was trying to look for a root without pc
I m not sure what to do ... tried odin and download mode not working to detect device and also recovery mode cleared cash and rest factory not workin
Plz i don t want to lose my phone
My phone i9003 not rooted no custom room just only stock rom running gingerbeard 2.3.6
So the problem is the looping reboot that happens suddenly and unablity to connect it to pc to flash cmod 10.1
I was wondering if there is any way to repair/fix my phone or at least root it to flash better rom ?
Thank you very much

-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up

K9998 said:
-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up
Click to expand...
Click to collapse
but i can t connect my pc in all modes to use odin

Shady282 said:
but i can t connect my pc in all modes to use odin
Click to expand...
Click to collapse
I fixed it already.
try read this:
http://forum.xda-developers.com/showthread.php?t=1651619
I simply remove the internal memory and flash a custom phone image, it usable but without external memory.
If you cannot connect to the odin3, use Fastboot mode

[Q] [HELP] Bootloop on Fastboot

Ok, firstly I'm newbie here :angel:
I have this Samsung GT-S6310 2 weeks ago.
I idly tried to upgrade my firmware to JB GNU ROM
First I install CWM via Odin (of course after installing the samsung drivers)
I turn on the phone with fastboot mode (Vol (-) + Home + Power)
After I tried to install CWM in Odin, there's description "FAIL"
(Checked Auto Reboot+F. Reset Time, nothing else)
I tried for a second time, remains the same
In fact, written in fastboot:
"CUSTOM BINARY DOWNLOAD: YES (2 ​​COUNTS)
Since then, my phone is not detected on my PC.
(Problems about Samsung Mobile USB CDC ..... Error Code: 10)
Several times I installed samsung drivers on my PC, it still does not connect the phone to PC. (To the other
Any solution? Everytime I turn on my phone, it's booting to Fastboot again, again and again.
Tired searching for 5 days and got nothing.
Sorry for my bad English

hello....
first of all its called download mode not fast boot.
try to install stock rom thru odin using another pc with samsung drivers installed.
Press thanks if I helped...Sent from my GALAXY Young DUOS

same problem
moayad albalawi said:
hello....
first of all its called download mode not fast boot.
try to install stock rom thru odin using another pc with samsung drivers installed.
Press thanks if I helped...Sent from my GALAXY Young DUOS
Click to expand...
Click to collapse
i have the same problem
thank for the solution

it's work for me
rhidz.nightmare said:
Ok, firstly I'm newbie here :angel:
I have this Samsung GT-S6310 2 weeks ago.
I idly tried to upgrade my firmware to JB GNU ROM
First I install CWM via Odin (of course after installing the samsung drivers)
I turn on the phone with fastboot mode (Vol (-) + Home + Power)
After I tried to install CWM in Odin, there's description "FAIL"
(Checked Auto Reboot+F. Reset Time, nothing else)
I tried for a second time, remains the same
In fact, written in fastboot:
"CUSTOM BINARY DOWNLOAD: YES (2 ​​COUNTS)
Since then, my phone is not detected on my PC.
(Problems about Samsung Mobile USB CDC ..... Error Code: 10)
Click to expand...
Click to collapse
i have exactly that situation,,, since then my laptop usb port not function anymore,,,
then i do this:
- restart my laptop,
- restart download mode (Vol (-)+home+power) ,
- open Odin,
- open device manager (for watching),
- connect the usb tho my phone,
- it's detected in Odin,, (Done)
- flash the original firmware,
- Done,:good:

[Completed] I need help No Twrp, Can't get into Recovery,No Os. Am I bricked?

So i had My T-Mobile GS6 Rooted
this is the **** up
I was going to factory reset my phone & i accidentally deleted my OS. i had tried to use Odin to re install the rom i had but my phone was never getting detected by any computer, i had tried to use adb sideloader to try & install it thru there but it wasn't working& also bought a OTG cable to try & install the rom from there but it wasn't able to detect it . So i thought it was my charging port because i had lost my fast charging capability before i had tried to reset my phone. I had twrp installed but my dumb ass did something that now im not able to get into twrp. Every time i try to power on my phone it loads with a white screen after a couple of minutes it shuts off. I can't get into twrp but can still get into download mode.
Odin Mode
Product Name: SM-G920T
Current Binary: Custom
System Status: Custom
FRP Lock: Off
Secure Download: Enabled
Knox Warranty Void: 1 (0X0301)
RP SWREV: B:2 K:2 S:2
What I Was Running
XtreStoLite-2.0-Odex-Pure-ROM-Final-XXU2BOFJ
XtreStoLite_S6_Odexed_Pure_Aroma_Add-on_Package_XXU2BOFJ_v.2.0
S6_UniKernel_v8-0002-TWRP
BOGG_Alliance_Framework_RLv3_1
I replaced the charging port on it today so let me know what i can do to try to fix my phone I wouldn't mind going back to stock or just let me know if its bricked

Hello Dear ,
U tried all ways & none of them worked , Emmmm did tried to used another laptop or pc ? & if u still by any ways booted to twrp do a full wipe including everything only then connect ur otg & try it it should connect ok , & try to used latest update of twrp ok ..
Thank You ,

thereassaad said:
Hello Dear ,
U tried all ways & none of them worked , Emmmm did tried to used another laptop or pc ? & if u still by any ways booted to twrp do a full wipe including everything only then connect ur otg & try it it should connect ok , & try to used latest update of twrp ok ..
Thank You ,
Click to expand...
Click to collapse
the thing is that i had twrp installed but my phone was not being recognized by any pc, i tried 2 different ones.
i downloaded the usb driver but odin would still not recognize my phone to flash it to stock
so i had tried to use adb sideloader to try & get a rom to have an OS back to be able to boot the phone but that never worked as well
when i was in twrp i saw that in the "mount" section there was an option for the OTG-USB
but that never did anything
I was still in twrp trying to figure out how to use the OTG to install the zip's into my phone when i went into advanced & I hit Fix Permissions.
i accidentally rebooted my phone & from then on i wasn't able to get into twrp, i ordered a usb charging port & waited for it for about 3 days (while waiting for the part i didn't use the phone)
Got the part today & changed the usb port but as soon as i connected the phone to the charger in a wall outlet or the pc's usb port the screen goes white after about 2 minutes it just shuts off
cant go into recovery but can go into Odin mode but even when i connect it to a pc it doesn't get recognize

Weird mate , anyway try to used other usb cable like changing it to many from ur friends etc ok if still not recognised to ur pc then sorry we can't do anything unless u did everything so if ur phone not recognised to any pc then only center service they can do it by installing os by box etc ok

sparkle v stuck at checking connection after factory reset

I have a karbonn sparkle v(android one) playstore and gmail was not working so I factory reset it. After first boot I got a welcome screen,then sim card setup.After that it shows available wifi which I choose one it shows connected and comes checking connection screen. I almost waited 4-5 hours it still shows checking connection. I have cleared cache partition and data again but no luck. It always get stuck. Pls help....

Softwarelord said:
Bro Read Carefully....
1.Flash Your Karbonn Sparkle v How To Flash Click Here
2. Download Stock Rom click here
please Read How To Flash Carefully...
You Will Get All Solution On This Link.. Read Step By Step...
Click to expand...
Click to collapse
thanks for reply bro...
but I am facing problem in flashing also
installed all mediatek drivers, signature disabled, added legacy software etc still my device is not detected by sp flash tools.
tried different Usb cables, 2 windows 10 system , no detection at all.
is their any alternative?

Softwarelord said:
install mtk vcom driver And click sp flash tool upgrade option
now remove battery and usb cable from cellphone....
now insert battery then cable... you will see detection on sp flash tool
Click to expand...
Click to collapse
This time a popup message appears
The last USB device connected to this computer malfunctioned, and Windows does not recognize it.
images of drivers and pop up messages attached.
but when I changed usb cable their is no pop up and no detection.

Softwarelord said:
Flash in Windows 7 Or Change Usb Cable...
Click to expand...
Click to collapse
Changed usb cable and tried in windows 7, no luck
It always show MTP USB device in device manager as soon as I connect my phone and inserts battery, without battery just nothing.

My karbonn sparkle v android one is running on android 6 marshmallow, few days ago i did a Factory reset on my phone, while the phone was rebooting after wiping all the data , It asked to setup sim card and WiFi after i entered the WiFi password it connected properly and the screen showed "Checking connection.. This might take a while.." .. so i waited but it is remaining is that screen, there is no option to skip that setting.... I have tried rebooting from recovery.. wiping cache partition but again it is struck on that screen.... ............... when i googled about this i saw same problem has happened to some Nexus devices also .. but they are not mentioning any solutions for this.. so If anyone has any idea please help.My karbonn sparkle v android one is running on android 6 marshmallow, few days ago i did a Factory reset on my phone, while the phone was rebooting after wiping all the data , It asked to setup sim card and WiFi after i entered the WiFi password it connected properly and the screen showed "Checking connection.. This might take a while.." .. so i waited but it is remaining is that screen, there is no option to skip that setting.... I have tried rebooting from recovery.. wiping cache partition but again it is struck on that screen.... ............... when i googled about this i saw same problem has happened to some Nexus devices also .. but they are not mentioning any solutions for this.. so If anyone has any idea please help.

I find solution through android one toolkit that unlocked my bootloader and i was able to install twrp also.
Then simply flashed cm 13 and now its working fine.

[HELP PLEASE] Bricked Phone. MTK 6580. Android 6.0.

Good day. I have made COUNTLESS efforts, methods, ways to unbrick my Hard Bricked
"ALMOST DEAD"?? Phone. I've watched so many vids on YTube and read alot in this forum
Here's some of the details of what i've been through.. Please help Me.. and thanks in advance..
PLEASE PLEASE.. Finish reading my thread.. I also provide some screenshot for reference of what happened..
THANK YOU SO MUCH IN ADVANCE.. MORE POWER..
I already tried the method of
"Download Only" or Flash the
1. "preloader" first
then after that untick/deselect it
2. load/flash other stuff (lk,boot,recovery,logo,secro,system,cache,userdata)
3. ALSO TRIED. Not flashing the (cache & userdata)
4. I used the stock rom. (Downloaded from ndrom)
5. Still. NO LUCK.
AFTER FLASHING EVERYTHING.
DID NUMEROUS FLASHING METHOD I READ FROM
COUNTLESS WEBSITES and FORUMS.
STILL. My phone is dead.
1. Not charging.
2. (NEW CHARGER) (NEW CHARGING CABLE)
still not charging. (NO LOGO) (NO VIBRATION)
3. I fully charged my (REMOVABLE BATTERY) using UNIVERSAL CHARGER.
4. I even bought new battery (SAME MODEL)
5. No luck.
Here's what happened (BEFORE BRICK)
1. My Phone (FIREFLY INTENSE XL) hanged then suddenly turned off.
2. I switched it on. It started well.
3. After few seconds, it restarted.
4. Now, stuck at logo.
5. I've waited for many hours. Still stuck at logo.
6. GOOGLED how to FACTORY RESET.
7. Had some luck? I was able to boot at FACTORY OPTIONS
(Chinese Text)
8. I GOOGLED again what's this chinese character/text means.
9. I GOOGLED how to FACTORY RESET.
10. Now, i chosed the option that has **EMMC text on it.
11. I Reboot the phone. STILL-Stock at logo.
.....Now I begin flashing using LATEST to OLDEST SPFlashTool.
**I made sure that my Battery level is 90%++
12. Flashed the phone for (FIRST TIME)
*I used the "Download Only" Option
*After first time flashing. Still stock at logo.
*Waited for almost (10 Mins. Only)
****Before Second flashing. I know,
My Computer (device manager) still detects my phone normally as Portable Device.
That's the normal detection before I bricked my phone.
...Now
13. Flashed (SECOND TIME)
*I used the "Format ALL and Download" Option
*After 2nd time flashing. Now, it didn't boot.
*I decided to charge it. Now, stock at charging logo.
No indication that it is charging. Mere charging logo. Logo is not moving up nor down.
**Now my PC couldn't detect my device like before--
it has sound of reconnects and disconnect.
Sound and Device Manager indicator.
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
14. Yet after that, I managed to Format the phone using SPFLASHTOOl Format Tab.
*After that
*NO BATTERY LOGO even I plugged the phone in charger
-waited for several mins. still no BAT. LOGO
*NO VIBRATION
*I CHARGED THE BATTERY using UNIV. Charger
*BOUGHT NEW BATTERY (SAME MODEL) (FULLY CHARGED)
*Paperweight?
*No logo
*No battery nor charging logo like before
*No vibration
*Yet, my last hope? (Hopeful)
My PC/DEVICE MANAGER detects it
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
NOTE:
*I used DESKTOP and LAPTOP both has Windows 10 32Bit OS.
*Installed all the required USB/PORT Driver
*New charging cable/data cable
*Tried different ports
*Tried different speed in SPFT (HiSpeed & FullSpeed)
*Tried flashing one-by-one
*Tried "Download Only" & "Format all+Download"
after "Almost no life at all"
====First I used MY OFFICIAL UPDATED ROM.
Next, the Outdated ROM. Last, CUSTOM ROM - No Luck.
-----BUT------
There's this youtube video
How to unbrick Any dead mtk phone 100% tested solution
I googled and saw a video on youtube that, advance option + Physical Format option could be
one of the essential *Last Resort to be able to SUCCESFULLY FLASH your CHINESE PHONE.
Sadly, I believe, in NEWER version of SPFT it's not possible when you load the MT6580 scatter file?
I also used old-oldest version of SPFT but it everytime i load the scatter file it says some error
*not legal blah blah blah? Please. Do you have any idea?
Is it possible in MTK6580?
I used old-oldest version of SPFT
version(s) 3.xxxx But, it won't allow to load my MT6580.
Any way to bypass it? Please..
PHOTO FOR REFERENCE. THANKS IN ADVANCE..
I GUESS.. MY LAST RESORT? IF YOU WATCHED THE EMBED VIDEO FROM YOUTUBE..
HERE'S WHAT HAPPENED..
METHOD I haven't tried..
FLASH USING Windows 7 OS.
QUESTION:
What is CYANOGEN OS?
Can I unbrick my phone using that OS? or by upgrading or downgrading it?
Is there any other tool to force my phone to take all the ROMS or format it?
Please Please.. Help me..
Thanks in advance and more power..

limereyes said:
Good day. I have made COUNTLESS efforts, methods, ways to unbrick my Hard Bricked
"ALMOST DEAD"?? Phone. I've watched so many vids on YTube and read alot in this forum
Here's some of the details of what i've been through.. Please help Me.. and thanks in advance..
PLEASE PLEASE.. Finish reading my thread.. I also provide some screenshot for reference of what happened..
THANK YOU SO MUCH IN ADVANCE.. MORE POWER..
I already tried the method of
"Download Only" or Flash the
1. "preloader" first
then after that untick/deselect it
2. load/flash other stuff (lk,boot,recovery,logo,secro,system,cache,userdata)
3. ALSO TRIED. Not flashing the (cache & userdata)
4. I used the stock rom. (Downloaded from ndrom)
5. Still. NO LUCK.
AFTER FLASHING EVERYTHING.
DID NUMEROUS FLASHING METHOD I READ FROM
COUNTLESS WEBSITES and FORUMS.
STILL. My phone is dead.
1. Not charging.
2. (NEW CHARGER) (NEW CHARGING CABLE)
still not charging. (NO LOGO) (NO VIBRATION)
3. I fully charged my (REMOVABLE BATTERY) using UNIVERSAL CHARGER.
4. I even bought new battery (SAME MODEL)
5. No luck.
Here's what happened (BEFORE BRICK)
1. My Phone (FIREFLY INTENSE XL) hanged then suddenly turned off.
2. I switched it on. It started well.
3. After few seconds, it restarted.
4. Now, stuck at logo.
5. I've waited for many hours. Still stuck at logo.
6. GOOGLED how to FACTORY RESET.
7. Had some luck? I was able to boot at FACTORY OPTIONS
(Chinese Text)
8. I GOOGLED again what's this chinese character/text means.
9. I GOOGLED how to FACTORY RESET.
10. Now, i chosed the option that has **EMMC text on it.
11. I Reboot the phone. STILL-Stock at logo.
.....Now I begin flashing using LATEST to OLDEST SPFlashTool.
**I made sure that my Battery level is 90%++
12. Flashed the phone for (FIRST TIME)
*I used the "Download Only" Option
*After first time flashing. Still stock at logo.
*Waited for almost (10 Mins. Only)
****Before Second flashing. I know,
My Computer (device manager) still detects my phone normally as Portable Device.
That's the normal detection before I bricked my phone.
...Now
13. Flashed (SECOND TIME)
*I used the "Format ALL and Download" Option
*After 2nd time flashing. Now, it didn't boot.
*I decided to charge it. Now, stock at charging logo.
No indication that it is charging. Mere charging logo. Logo is not moving up nor down.
**Now my PC couldn't detect my device like before--
it has sound of reconnects and disconnect.
Sound and Device Manager indicator.
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
14. Yet after that, I managed to Format the phone using SPFLASHTOOl Format Tab.
*After that
*NO BATTERY LOGO even I plugged the phone in charger
-waited for several mins. still no BAT. LOGO
*NO VIBRATION
*I CHARGED THE BATTERY using UNIV. Charger
*BOUGHT NEW BATTERY (SAME MODEL) (FULLY CHARGED)
*Paperweight?
*No logo
*No battery nor charging logo like before
*No vibration
*Yet, my last hope? (Hopeful)
My PC/DEVICE MANAGER detects it
**It say's in Device Manager
Connected (MediaTek USB Port (COM6)
Reconnect (MediaTek Preloader USB VCOM (Android)(COM5)
NOTE:
*I used DESKTOP and LAPTOP both has Windows 10 32Bit OS.
*Installed all the required USB/PORT Driver
*New charging cable/data cable
*Tried different ports
*Tried different speed in SPFT (HiSpeed & FullSpeed)
*Tried flashing one-by-one
*Tried "Download Only" & "Format all+Download"
after "Almost no life at all"
====First I used MY OFFICIAL UPDATED ROM.
Next, the Outdated ROM. Last, CUSTOM ROM - No Luck.
-----BUT------
There's this youtube video
How to unbrick Any dead mtk phone 100% tested solution
I googled and saw a video on youtube that, advance option + Physical Format option could be
one of the essential *Last Resort to be able to SUCCESFULLY FLASH your CHINESE PHONE.
Sadly, I believe, in NEWER version of SPFT it's not possible when you load the MT6580 scatter file?
I also used old-oldest version of SPFT but it everytime i load the scatter file it says some error
*not legal blah blah blah? Please. Do you have any idea?
Is it possible in MTK6580?
I used old-oldest version of SPFT
version(s) 3.xxxx But, it won't allow to load my MT6580.
Any way to bypass it? Please..
PHOTO FOR REFERENCE. THANKS IN ADVANCE..
I GUESS.. MY LAST RESORT? IF YOU WATCHED THE EMBED VIDEO FROM YOUTUBE..
HERE'S WHAT HAPPENED..
METHOD I haven't tried..
FLASH USING Windows 7 OS.
QUESTION:
What is CYANOGEN OS?
Can I unbrick my phone using that OS? or by upgrading or downgrading it?
Is there any other tool to force my phone to take all the ROMS or format it?
Please Please.. Help me..
Thanks in advance and more power..
Click to expand...
Click to collapse
Cyanogen OS is a custom rom. It can only flash through custom recovery. But you can't even access the recovery mode then it can't help you to unbrick your android.

Other method to physical format using spft?
Ashwinrg said:
Cyanogen OS is a custom rom. It can only flash through custom recovery. But you can't even access the recovery mode then it can't help you to unbrick your android.
Click to expand...
Click to collapse
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..

limereyes said:
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
Click to expand...
Click to collapse
Same problem with me, I also have an MT6580 device and I also first tried to:
(when I used SP Flash tool, it only fully worked in version SP_Flash_Tool_v5.1532_Win )
1) format the whole flash (in SP Flash tool)
2) only select preloader
3) flash (with Download selected, and phone volume + button pressed in and then connected USB to pc)
4) select all other (recovery, boot, system, ...)
5) flash
For me as well, nothing happened - the phone does not react when I try charging it, and pressing the power button has no effect.
The only advice I can give you is the knowledge that the preloader is in the fault - somehow the preloader on my phone before the flashing was different from the preloader in my stock rom. Perhaps it is the same data, but the address at which it is flashed is wrong. Don't bother yet with flashing the system, userdata or other images - if the preloader is not correctly installed, the phone won't recognize it when it tries to boot up, and the other system, recovery etc. images are useless.
Perhaps a good analogy is: say the preloader is the bios of a computer: if the bios fails to be loaded, then the operating system (android, windows etc - i.e. the system, recovery etc. images) will never be loaded either

limereyes said:
Thanks for the reply..
1. I just wanna ask, do you have any idea or IS IT POSSIBLE? to format my device using the
ADVANCE OPTION + PHYSICAL FORMAT FORCEDLY ERASE (BAD BLOCK MARK IS ERASED) in SPFT?
I see that option in new-latest version of SPFT but, WHENEVER my ROM were already loaded (MTK6580), that option is gone.
I GOOGLED it but I can't seem to find the right keyword for it.. Do you have any idea? even in other android tool?
There's this guy on YTube that, did that method
KEYWORD: How to unbrick Any dead mtk phone 100% tested solution
I can't upload the video..
Also, what is the BEST METHOD to flash the ROM using Windows 7?
I managed to borrow a laptop with WINDOWS 7 32Bit OS installed.
*Should I flash the preloader again?
*Should I untick/deselect it (preloader) and ALWAYS flash other stuff? except CACHE & USERDATA?
* I flashed countless times, I just don't want to make things worse..
**Is it possible to install or flash my rom to EXTERNAL SD? and be able to boot my phone using it? There's this guy on Ytube did that to his dead phone and it booted..
He used, some sort of image file and installed it in sd card using wind32diskimager..
Is it possbile? or for some phone models only?
https://forum.xda-developers.com/yu-yuphoria/help/how-to-fixing-hardbricked-yuphoria-t3330604
Thanks and have a nice day..
Click to expand...
Click to collapse
Sir please help me out
I have Micromax a120 device. Few days back it got bricked it stuck on bootloop and not working even after factory reset moreover my pc is not recognizing mobile and display message as device descriptor request failed. I have installed all drivers