Please i need help i m not sure what to do the problem is my phone suddenly started rebooting and went into loop and whenever i open playstore it tells me force close vending error and also my pc can t detect my phone sometimes it says device not recognized and sometimes it says can be used but nothing happening...
- downloaded kies all drivers nothing working
- tried changing cable but didn t work while on other samsungs it worked well nromal
- tried debugg mode mass storage everything that was suggested here in xda and on other sites
- z4root and gingerbreAk not working
Want to root it to flash better firmware vut since i can t detected on pc to root it i was trying to look for a root without pc
I m not sure what to do ... tried odin and download mode not working to detect device and also recovery mode cleared cash and rest factory not workin
Plz i don t want to lose my phone
My phone i9003 not rooted no custom room just only stock rom running gingerbeard 2.3.6
So the problem is the looping reboot that happens suddenly and unablity to connect it to pc to flash cmod 10.1
I was wondering if there is any way to repair/fix my phone or at least root it to flash better rom ?
Thank you very much
-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up
K9998 said:
-''- Same here.
Try to fix it by Odin with Nand Erase all, no love
Reboot automatically after 'SAMSUNG' LOGO shown up
Click to expand...
Click to collapse
but i can t connect my pc in all modes to use odin
Shady282 said:
but i can t connect my pc in all modes to use odin
Click to expand...
Click to collapse
I fixed it already.
try read this:
http://forum.xda-developers.com/showthread.php?t=1651619
I simply remove the internal memory and flash a custom phone image, it usable but without external memory.
If you cannot connect to the odin3, use Fastboot mode
Related
Hi All,
I was using Samsung Galaxy SL (I9003) with Android Gingerbread 2.3.6. I wanted to install CM10. Here what I did.
-> Rooted the phone using Odin (Windows)
-> Installed CM10 through SD Card
-> Installed gapps through SD Card
So far went well and I was able to install the ROM. But my key board was not working. So I wanted (I got scared on rooting) to recover my stock ROM (which I took backup through CWM)
Now my phone got soft bricked. It goes into boot loop (Samsung logo). Doesn't open up recovery. It goes into Download mode. But none of the computer recognizes it. Odin (Windows) doesn't, Heimdall doesn't, ADB doesn't. Fastbood Doesn't.
I am desperate for a solution to bring my phone alive.
It does turn on and it goes into download mode. But not able to find option to flash the Rom.
I am new to the forum and this area. So sorry for my ignorence
If you've flashed "[ALPHA][ROM][4.1.2] CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release" and re-flashed other roms other than Alpha 4 without repartition(going back to Odin-Pit-XXKPE/XXKPQ-DDLF2/or any-root) I think you've hard bricked your phone...http://forum.xda-developers.com/showthread.php?t=2048672
wee2wee said:
If you've flashed "[ALPHA][ROM][4.1.2] CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release" and re-flashed other roms other than Alpha 4 without repartition(going back to Odin-Pit-XXKPE/XXKPQ-DDLF2/or any-root) I think you've hard bricked your phone...http://forum.xda-developers.com/showthread.php?t=2048672
Click to expand...
Click to collapse
Thanks.. I also think so. if I give it to Samsung service center.. can they recover it (it's out of warranty) - if it is less costlier than a new phone ?
Thanks,
Achir
as far as i know, if you can go into download mode then your phone is not bricked.
just flash back to CM10A4 and follow the step to go back to stock.
sianghung said:
as far as i know, if you can go into download mode then your phone is not bricked.
just flash back to CM10A4 and follow the step to go back to stock.
Click to expand...
Click to collapse
How can I flash ? No computer is detecting my device. What alternate option I have ? Can a Jig help ? I think jig is just to put the phone in download mode.
Thanks,
Achir
achir said:
How can I flash ? No computer is detecting my device. What alternate option I have ? Can a Jig help ? I think jig is just to put the phone in download mode.
Thanks,
Achir
Click to expand...
Click to collapse
try reinstalling ur phone driver? restart ur pc and try again??
wee2wee said:
If you've flashed "[ALPHA][ROM][4.1.2] CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release" and re-flashed other roms other than Alpha 4 without repartition(going back to Odin-Pit-XXKPE/XXKPQ-DDLF2/or any-root) I think you've hard bricked your phone...http://forum.xda-developers.com/showthread.php?t=2048672
Click to expand...
Click to collapse
Lola's i9003 was dead because it does not start... but my friend in this case achir SL is still recoverable...
@achir:dont panic and dont flash unnecessary things...You have soft bricked your SL.. too much of flashing and a small mistake can brick your phone.
and since you said your phone is not detected by ODIN but you can still go in download mode... so here are the steps which can help you..
1.Install samsung USB drivers for I9003
2.Install net framework on your PC
3.Disable your computers Antivirus and Firewall(it may interupt with ODIN process)
4.Restart your PC.
5.Connect your phone in download mode.
6.If its detected by system but not by ODIN then unplug and then replug the phone, repeat this process untill your phone is recognised by ODIN(rebooting of PC should also be done if necessary).
7.Once connected/recognised by ODIN flash a stock firmware.
8.Be patient because the first boot will take a long time.
let me know if it worked well?
You need not worry. I too had a bricked my phone exactly on Jan 1 (and missed wishing my friends as my phone was off).
See my forum where i faced the same issue. http://forum.xda-developers.com/showthread.php?t=2076250
As our members have mentioned you can reinstall the Samsung drivers in the PC which will make ODIN detect your phone. :good:
Okay. I re-installed the driver but still my PC doesn't recognize it (unknown device). My Mac and my friend's Linux can not recognize it.
I have my personal Mac (Windows is in office laptop which doesn't have full admin). But I tried with Heimdall and ADB in my Mac (I assume doesn't need driver) but they can not list my device.
Now my critical problem is making my Mac detect the device so that I can proceed with some recovery (if at all possible).
You case is very similar with lolation. From cm10a4 with mtd fs direct flash rfs fs. Lolation go to service center.
Sent from my Galaxy Nexus using Tapatalk 2
I tried a lot but it seems no computer can recognize the phone. It seems service center is the only option
Have you try using another usb cable?(maybe the usb cable you're using now is defect)..According to Dhiru, either Alpha 3 or 4 won't result in a hardbrick...read here... http://forum.xda-developers.com/showthread.php?p=35505300#post35505300
Can't Recover ! Need Help
Can't Recover ! Need Help
Hi All,
I was using Samsung Galaxy SL (I9003) 4GB Indian with Android Gingerbread 2.3.6.7 I wanted to install CM10. Here what I did.
-> Rooted the phone using Odin (Windows)
-> Installed CM10 through SD Card
-> Installed gapps through SD Card
So far went well and I was able to install the ROM. But my key board was not working. So I wanted (I got scared on rooting) to recover my stock ROM (which I took backup through CWM)
Now my phone got bricked. I can open up recovery either goes into Download mode. Odin (Windows) which doesn't help me. i tried to install rom but got error now my phone can get into recovery or download mode only.
I tried to flash it gives me pass but position is same please help someone.
After reinstalling ur kies,connect ur phone to odin...it will be detected..if it is not detected also , just frst flash latona.pit file...once... if not flashed try to flash again....then flash complete package of xxkpe...ur phone will boot up..bcz one time i too faced same prblm...my phone was not detected by Odin..but i flashed latona.pit file,by luck it worked for me...then i flashed xxkpe...phonegot bootedup...
---------- Post added at 01:01 AM ---------- Previous post was at 12:58 AM ----------
caashmon said:
Can't Recover ! Need Help
Hi All,
I was using Samsung Galaxy SL (I9003) 4GB Indian with Android Gingerbread 2.3.6.7 I wanted to install CM10. Here what I did.
-> Rooted the phone using Odin (Windows)
-> Installed CM10 through SD Card
-> Installed gapps through SD Card
So far went well and I was able to install the ROM. But my key board was not working. So I wanted (I got scared on rooting) to recover my stock ROM (which I took backup through CWM)
Now my phone got bricked. I can open up recovery either goes into Download mode. Odin (Windows) which doesn't help me. i tried to install rom but got error now my phone can get into recovery or download mode only.
I tried to flash it gives me pass but position is same please help someone.
Click to expand...
Click to collapse
Go to download mode...flash latona.pit file...then ur phone will be in black color screen..then remove battery again go to download mode and flash full xxkpe package...ur phone will boot up...
Hi there,
I've read every kind of threads here and no one works for me. I rooted my Samsung GT-I9000 and all worked well, then the phone started acting crazy, my root was gone and when I boot the phone I come to the usual screen where you enter pincode but after that the popup screens start, multiple popups saying that twlauncher crashed, media, acore etc.. so I cant get to the screen where I can enable usb debugging. I can enter the stock recovery and my PC can contact the phone, but when I press vol down + home + power so I get the download mode the PC cant find the phone, not in win7 or in Linux. I have tried every kind of driver there is for Samsung but no one works that make it possible for the PC to find the phone when it is in download mode, win7 list it under "unknown device" and NO driver at ALL works so win7 can reqonize the phone. I've tried installing Kies how many times I dont know and uninstalling, updated SDK, uninstalled every USB driver and even the hubs and installed them again, updated win7.. what can I do to flash the phone!?!? Because Odin, no matter old from new; cant find the phone in DL mode, same with linux. And in stock recovery, I wiped cache and data but the problem is still there when I enter the OS after enter my pin...
How can I flash my phone without PC finding the phone in DL mode and no USB debugging enabled? Or how to flash CWM so I can flash a ROM from SD? Please help!!
At first try another PC with Winsows or use another USB cable.
About recavery-try to find temperery recovery or cwm,that flash from recovery.
DeMaCr said:
At first try another PC with Winsows or use another USB cable.
About recavery-try to find temperery recovery or cwm,that flash from recovery.
Click to expand...
Click to collapse
As I wrote, my desktop is under Linux and the laptop under Win7 and none can reach the phone, both computers can only detect the phone in Recovery mode, but the laptop under Win7 only detect the phone as offline, Linux on the other hand can reboot phone into recovery from recovery, to download mode and reboot normal. Already tried to use Ubuntu 13 Live and it cant detect the phone in DL mode either. And tried different cables also. And if I find a recovery or CWM, then what? Dont I need to get phone into DL mode to flash something?
But in Linux I've got a small breakthrough, Heimdall can detect the phone know, but fails to flsah anything. Maybe wrong files or something..? But anyhow, if Heimdall now can detect the phone and it couldnt before; know I just need the right files to flash.
Just find a friend who owns Windows desktop/ laptop, download stock from Sammobile, flash stock via Odin. If not, try Odin mobile...
I did a really, really dumb thing a few months ago. I flashed a wrong something or another to fix an issue I had with my keyboard crashing after flashing another wrong thing..
Anywho, I couldn't get the damn keyboard to stop crashing for the life of me, so I set out to FORMAT/ CLEAR EVERYTHING ON MY PHONE. Yikes.
At this point, I can boot into recovery(CWM) and DL mode, but my PC will not recognize my phone at all. I installed your S3 toolkit v7.0, hoping it would help, but nay.
I cannot boot fully into Android to allow usb debugging, etc.
I can mount and unmount internal sd, cache, etc, but no drivers are being installed because it is not being recognized.
I've uninstalled Kies, etc.
HALP!HALP!
Daniel_NC said:
I did a really, really dumb thing a few months ago. I flashed a wrong something or another to fix an issue I had with my keyboard crashing after flashing another wrong thing..
Anywho, I couldn't get the damn keyboard to stop crashing for the life of me, so I set out to FORMAT/ CLEAR EVERYTHING ON MY PHONE. Yikes.
At this point, I can boot into recovery(CWM) and DL mode, but my PC will not recognize my phone at all. I installed your S3 toolkit v7.0, hoping it would help, but nay.
I cannot boot fully into Android to allow usb debugging, etc.
I can mount and unmount internal sd, cache, etc, but no drivers are being installed because it is not being recognized.
I've uninstalled Kies, etc.
HALP!HALP!
Click to expand...
Click to collapse
If you boot into DL mode and run odin on your PC does it fail to see the device?
apacseven said:
If you boot into DL mode and run odin on your PC does it fail to see the device?
Click to expand...
Click to collapse
I'm waiting on my PC to free up again(currently on a Mac). I had not tried Odin because in the past I was unable to mount internal SD, which I understood was keeping it from being recognized. I instead thought the Toolkit would do the trick automatically, though I most likely had the wrong idea. Everything is mountable again (for some odd reason), so I will give it a go.
Could I accomplish downloading drivers and flashing rom to device using Odin alone? Or should I use the Toolkit?
Thanks!
Daniel_NC said:
I'm waiting on my PC to free up again(currently on a Mac). I had not tried Odin because in the past I was unable to mount internal SD, which I understood was keeping it from being recognized. I instead thought the Toolkit would do the trick automatically, though I most likely had the wrong idea. Everything is mountable again (for some odd reason), so I will give it a go.
Could I accomplish downloading drivers and flashing rom to device using Odin alone? Or should I use the Toolkit?
Thanks!
Click to expand...
Click to collapse
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver http://d-h.st/vMk
apacseven said:
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver ...
Thanks!! I'll give it a shot now.
Click to expand...
Click to collapse
apacseven said:
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver......
Click to expand...
Click to collapse
Odin is not recognizing the device. Should I unmount or mount anything on the device for this to work properly? I have drivers installed.
Hi Guys...!
I am Muhammad Ali From Faisalabad Pakistan...! Using Huawei Ascend G510-0200 ...! Last night I've just flashed a zip in recovery mode that was including the boot.img file and then my phone got bricked...!
It only showes the splash screen which consist of A big green box, which has two small boxex inside, red and blue, phone is not detecting in recovery mode or not in the fastboot mode so that I cannot flash the stock kernel back to it...! My phone was running on CM 10.2 nightly which is Android 4.3.1...!
Device was not recognized in windows 7 completely , no plug and play options are avalable or not shown even in the device manager...!
Tried to put Fastboot.apk in the memory card and try to get it recognized in the system but failed...!
I want to get my phone working again...! Any method to change the kernel will be helpful...!
Can I tried it with Odin? Or any software like odin to work with...! Any hardware component which I can use for getting it fixed...!
Is it necessory to get it working with linux for better results...?
Any help will be appreciated...!
1 Thing I've tried later that is it is recognized as a modem device that is working correctly...! but in the firmware update mode...!
That is pink screen...!
but the fastboot and adb are not recognizing this device...!
Unbrick software also failed to get it recognized...!
No usb shown in my computer for this device...!
Cannot operate my phone so I am un happy...! isn't there any odin like software to do this...?
please help...!
sorry for uploading the pink screen image of another device becouse I do not have camera...!
The Odin just detected my Device but unable to flash successfully on it...!
Should I use the boot able sdcard for reflashing the firmware...!
boot able sdcard like you can use in the flashing of nook tablet?
Any Idea?
q
Hi,
I have same problem,did you resolve yours?
Muhammad_Ali said:
Hi Guys...!
I am Muhammad Ali From Faisalabad Pakistan...! Using Huawei Ascend G510-0200 ...! Last night I've just flashed a zip in recovery mode that was including the boot.img file and then my phone got bricked...!
It only showes the splash screen which consist of A big green box, which has two small boxex inside, red and blue, phone is not detecting in recovery mode or not in the fastboot mode so that I cannot flash the stock kernel back to it...! My phone was running on CM 10.2 nightly which is Android 4.3.1...!
Device was not recognized in windows 7 completely , no plug and play options are avalable or not shown even in the device manager...!
Tried to put Fastboot.apk in the memory card and try to get it recognized in the system but failed...!
I want to get my phone working again...! Any method to change the kernel will be helpful...!
Can I tried it with Odin? Or any software like odin to work with...! Any hardware component which I can use for getting it fixed...!
Is it necessory to get it working with linux for better results...?
Any help will be appreciated...!
Click to expand...
Click to collapse
problem
Did You fix yours phone?????
I have same problem,but havent find any solution yet....
i got the same problem any one knows how to fix it
Hi
Some help please, I installed cm 11, on my i9003 from DDMF1, I HAD lot of bugs in it, camera bug in third party app, battery drain, i decided switch back to cm 10.2.
Here what i did wrong, i flashed straight from CM through cwm, i got aborted error, then i gave up, my phone drains in 2 hrs, so i tried to install DDMF! from back up of cwm.
it didnt work either, now phone stuck at samsung logo, it doesnt switch off too, i have to remove battery to switch it off,
i tried some searching in forum downloaded DDLF2 , phone goes to download mode, but my pc cant recognize it, it says unknown device.
reinstalled kies and drivers no use. now am stuck.
please advice, sorry if my english is bit bad
Have you tried to uninstall drivers from pc then reinstall them, then reboot your PC?
catarifrangente said:
Have you tried to uninstall drivers from pc then reinstall them, then reboot your PC?
Click to expand...
Click to collapse
Hi tried it n times, finally succeded flash to GB.. My device is up, Thank you all
prabuflash said:
Hi tried it n times, finally succeded flash to GB.. My device is up, Thank you all
Click to expand...
Click to collapse
happy that ur device is up
some times jz installing drivers wont help for odin to detect device... turm the internet on while plugging ur device to pc in usn debuging mode so that pc can download required files immediately... and it will help in detecting odin jz in the first try